Holger Kipp
2006-Feb-28 04:00 UTC
shutdown/halt/reboot-issues... FreeBSD 6.x including PRERELEASE
Hello,
shutdown, halt and reboot give me some trouble with
6.x-versions of FreeBSD, the shutdown-process stops
after printing
"All buffers synced"
For one server, this seems to have started after
putting a PCI-800H sio-card in a different slot
so it didn't share irqs with the on-board adaptec
scsi any more, and as a result the server can't
be rebooted remotely any more (I have to cycle power
manually).
Maybe this is related to PR 93903?
http://www.freebsd.org/cgi/query-pr.cgi?pr=kern/93903
For dmesg of my server, see
http://www.freebsd.org/cgi/query-pr.cgi?pr=51982
(even though this PR relates to a different problem)
On my home-pc (no scsi) I have the same issue, but
only sometimes.
Suggestions, anything I should try?
Regards,
Holger Kipp
dmesg:
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.1-PRERELEASE #12: Sun Feb 26 02:15:34 CET 2006
root@katrin.hkipp.de:/usr/obj/usr/src/sys/KATRIN
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) XP 2800+ (2083.11-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
real memory = 536543232 (511 MB)
avail memory = 515686400 (491 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0: Changing APIC ID to 1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 0.3> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA KT880 host to PCI bridge> mem 0xe0000000-0xe3ffffff at device
0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port
0xec00-0xec07,0xe800-0xe803,0xe400-0xe407,0xe000-0xe003,0xdc00-0xdc0f,0xd800-0xd8ff
irq 20 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 21 at device
16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 21 at device
16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc800-0xc81f irq 21 at device
16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xcc00-0xcc1f irq 21 at device
16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfebff800-0xfebff8ff irq 21 at
device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub5: vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.08, addr 2
uhub5: multiple transaction translators
uhub5: 4 ports with 4 removable, self powered
umass0: SMSC 223 USB97C223, rev 2.00/1.95, addr 3
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <VIA VT8237> port 0xd000-0xd0ff irq 22 at device 17.5 on pci0
pcm0: <C-Media Electronics CMI9761 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd400-0xd4ff mem
0xfebffc00-0xfebffcff irq 23 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:0b:6a:c0:00:ce
acpi_button0: <Power Button> on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/PS2/ECP
Probing for PnP devices on ppbus0:
ppbus0: <Lexmark International Lexmark Optra S 1855> PRINTER PCL 6
Emulation, PostScript Level 2 Emulation, NPAP, PJL
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on
acpi0
sio0: type 16550A
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ums0: vendor 0x1241 product 0x1122, rev 1.00/1.00, addr 2, iclass 3/1
ums0: 5 buttons and Z dir.
uscanner0: EPSON EPSON Scanner, rev 1.10/1.00, addr 2
Timecounter "TSC" frequency 2083112488 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 152627MB <SAMSUNG SP1614N TM100-30> at ata0-master UDMA100
ad1: 76351MB <SAMSUNG SP0802N TK100-24> at ata0-slave UDMA100
acd0: DVDR <HL-DT-ST DVDRAM GSA-4163B/A102> at ata1-master UDMA33
acd1: CDRW <HL-DT-ST RW/DVD GCC-4120B/2.01> at ata1-slave PIO4
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4163B A102> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [1317408 x 2048 byte records]
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HL-DT-ST RW/DVD GCC-4120B 2.01> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <SMSC 223 U HS-CF 1.95> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: Attempt to query device size failed: NOT READY, Medium not present
da1 at umass-sim0 bus 0 target 0 lun 1
da1: <SMSC 223 U HS-MS 1.95> Removable Direct Access SCSI-0 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da2 at umass-sim0 bus 0 target 0 lun 2
da2: <SMSC 223 U HS-SM 1.95> Removable Direct Access SCSI-0 device
da2: 40.000MB/s transfers
da2: Attempt to query device size failed: NOT READY, Medium not present
da3 at umass-sim0 bus 0 target 0 lun 3
da3: <SMSC 223 U HS-SD/MMC 1.95> Removable Direct Access SCSI-0 device
da3: 40.000MB/s transfers
da3: Attempt to query device size failed: NOT READY, Medium not present
..
Trying to mount root from ufs:/dev/ad0s1a
JoaoBR
2006-Feb-28 04:40 UTC
shutdown/halt/reboot-issues... FreeBSD 6.x including PRERELEASE
On Tuesday 28 February 2006 09:00, Holger Kipp wrote:> Hello, > > shutdown, halt and reboot give me some trouble with > 6.x-versions of FreeBSD, the shutdown-process stops > after printing > > "All buffers synced" >I had similar problems and I guess they are hardware/acpi related In a certain case I changed the 2x agp video card into a 8x (the bios allowed auto, 4x and 8x) and the machine could reboot then In another case I enabled or disabled the "acpi 2.0 enable" option in the bios Another case I changed the apic (!acpi) setting in the bios And appearently the Celeron 2.13Ghz S478 has this problem on Asus MBs, changing it resolves the reboot issue too. On my notebook I got this when hw.acpi.cpu.cx_lowest was not C1 in all this cases disabling acpi at boot time made no difference Jo?o A mensagem foi scaneada pelo sistema de e-mail e pode ser considerada segura. Service fornecido pelo Datacenter Matik https://datacenter.matik.com.br