Hi Soren,
I just went to 6.1-PRE on my main machine, coming from 6.0-STABLE
of roughly end of december.
And I hit some stuff that really worries me:
- the freshly built kernel keels over with (hand transcribed):
ata3: reiniting channel SATA connect ...
SATA connected
sata_connect_devices 0x1 <ATA_MASTER>
ad6: req=0xC35ba0c8 SETFEATURES SETTRANSFERMODE semaphore timeout
!! DANGER Will RObinson !!
(... is where I cannot read my own handwriting, it scrolled quite fast on
the screen..)
Boot device is a SATA RAID1 on a Promise 2300.
Another snag is that my ad10 disk on 6.0-STABLE suddenly became ad12 on
6.1-PRE
Verbose dmesg.boot from the 6.0-STABLE kernel and atacontrol list are attached.
thanks,
--
Wilko Bulte wilko@FreeBSD.org
-------------- next part --------------
ATA channel 0:
Master: acd0 <NEC DVD RW ND-2510A/2.15> ATA/ATAPI revision 0
Slave: no device present
ATA channel 1:
Master: acd1 <CD-532E/1.0A> ATA/ATAPI revision 0
Slave: no device present
ATA channel 2:
Master: ad4 <Maxtor 7Y250M0/YAR51KW0> Serial ATA v1.0
Slave: no device present
ATA channel 3:
Master: ad6 <Maxtor 7Y250M0/YAR51KW0> Serial ATA v1.0
Slave: no device present
ATA channel 4:
Master: no device present
Slave: no device present
ATA channel 5:
Master: ad10 <Maxtor 6B160M0/BANC1BY0> Serial ATA v1.0
Slave: no device present
ATA channel 6:
Master: no device present
Slave: no device present
-------------- next part --------------
found-> vendor=0x8086, dev=0x244e, revid=0xc2
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24d0, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x24db, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x24d1, revid=0x02
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[10]: type 4, range 32, base 0000bc00, size 3, enabled
map[14]: type 4, range 32, base 0000b880, size 2, enabled
map[18]: type 4, range 32, base 0000b800, size 3, enabled
map[1c]: type 4, range 32, base 0000b480, size 2, enabled
map[20]: type 4, range 32, base 0000b400, size 4, enabled
pcib0: matched entry for 0.31.INTA
pcib0: slot 31 INTA hardwired to IRQ 18
found-> vendor=0x8086, dev=0x24d3, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[20]: type 4, range 32, base 00000400, size 5, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x24d5, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000c000, size 8, enabled
map[14]: type 4, range 32, base 0000c400, size 6, enabled
map[18]: type 1, range 32, base f6fff800, size 9, enabled
map[1c]: type 1, range 32, base f6fff400, size 8, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device
0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xf8000000
agp0: allocating GATT for aperture of size 64M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xf7000000-0xf7efffff
pcib1: prefetched decode 0xf4000000-0xf5ffffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P1 -
AE_NOT_FOUND
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x102b, dev=0x0525, revid=0x82
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base f4000000, size 25, enabled
pcib1: (null) requested memory range 0xf4000000-0xf5ffffff: good
map[14]: type 1, range 32, base f7efc000, size 14, enabled
pcib1: (null) requested memory range 0xf7efc000-0xf7efffff: good
map[18]: type 1, range 32, base f7000000, size 23, enabled
pcib1: (null) requested memory range 0xf7000000-0xf77fffff: good
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
drm0: <Matrox G400/G450 (AGP)> mem
0xf4000000-0xf5ffffff,0xf7efc000-0xf7efffff,0xf7000000-0xf77fffff irq 16 at
device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized mga 3.1.0 20021029 on minor 0
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc480-0xc49f irq
16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc480
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xc800-0xc81f irq
19 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc800
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xc880-0xc89f irq
18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xc880
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xcc00-0xcc1f irq
16 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xcc00
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf6fffc00-0xf6ffffff irq
23 at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xf6fffc00
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xefff
pcib2: memory decode 0xf7f00000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pcib2: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib2
pci2: physical bus=2
found-> vendor=0x10b7, dev=0x1700, revid=0x12
bus=2, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f7ffc000, size 14, enabled
pcib2: (null) requested memory range 0xf7ffc000-0xf7ffffff: good
map[14]: type 4, range 32, base 0000e800, size 8, enabled
pcib2: (null) requested I/O range 0xe800-0xe8ff: in range
pcib2: matched entry for 2.5.INTA
pcib2: slot 5 INTA hardwired to IRQ 22
found-> vendor=0x9710, dev=0x9845, revid=0x01
bus=2, slot=9, func=0
class=07-00-02, hdrtype=0x00, mfdev=0
cmdreg=0x0103, statreg=0x0280, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 0000ec00, size 3, enabled
pcib2: (null) requested I/O range 0xec00-0xec07: in range
map[14]: type 4, range 32, base 0000e480, size 3, enabled
pcib2: (null) requested I/O range 0xe480-0xe487: in range
map[18]: type 4, range 32, base 0000e400, size 3, enabled
pcib2: (null) requested I/O range 0xe400-0xe407: in range
map[1c]: type 4, range 32, base 0000e080, size 3, enabled
pcib2: (null) requested I/O range 0xe080-0xe087: in range
map[20]: type 4, range 32, base 0000e000, size 3, enabled
pcib2: (null) requested I/O range 0xe000-0xe007: in range
map[24]: type 4, range 32, base 0000dc00, size 4, enabled
pcib2: (null) requested I/O range 0xdc00-0xdc0f: in range
pcib2: matched entry for 2.9.INTA
pcib2: slot 9 INTA hardwired to IRQ 21
found-> vendor=0x1077, dev=0x1020, revid=0x05
bus=2, slot=11, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0200, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type 4, range 32, base 0000d800, size 8, enabled
pcib2: (null) requested I/O range 0xd800-0xd8ff: in range
map[14]: type 1, range 32, base f7ff7000, size 12, enabled
pcib2: (null) requested memory range 0xf7ff7000-0xf7ff7fff: good
pcib2: matched entry for 2.11.INTA
pcib2: slot 11 INTA hardwired to IRQ 23
found-> vendor=0x105a, dev=0x3570, revid=0x02
bus=2, slot=13, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0230, cachelnsz=1 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D3 current D0
map[10]: type 4, range 32, base 0000d480, size 7, enabled
pcib2: (null) requested I/O range 0xd480-0xd4ff: in range
map[18]: type 4, range 32, base 0000d000, size 8, enabled
pcib2: (null) requested I/O range 0xd000-0xd0ff: in range
map[1c]: type 1, range 32, base f7ff6000, size 12, enabled
pcib2: (null) requested memory range 0xf7ff6000-0xf7ff6fff: good
map[20]: type 1, range 32, base f7fc0000, size 17, enabled
pcib2: (null) requested memory range 0xf7fc0000-0xf7fdffff: good
pcib2: matched entry for 2.13.INTA
pcib2: slot 13 INTA hardwired to IRQ 21
skc0: <3Com 3C940 Gigabit Ethernet> port 0xe800-0xe8ff mem
0xf7ffc000-0xf7ffffff irq 22 at device 5.0 on pci2
skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xf7ffc000
skc0: interrupt moderation is 100 us
skc0: 3Com Gigabit LOM (3C940) rev. (0x1)
skc0: PN: 40-0779-000
skc0: EC: Rev. 1.2
skc0: MN: 3Com
skc0: SN: HFSR9B01E8
skc0: chip ver = 0xb0
skc0: chip rev = 0x01
skc0: SK_EPROM0 = 0x00
skc0: SRAM size = 0x020000
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: bpf attached
sk0: Ethernet address: 00:0c:6e:4f:77:0c
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [MPSAFE]
puc0: <NetMos NM9845 Quad UART> port
0xec00-0xec07,0xe480-0xe487,0xe400-0xe407,0xe080-0xe087,0xe000-0xe007,0xdc00-0xdc0f
irq 21 at device 9.0 on pci2
puc0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xec00
puc0: Reserved 0x8 bytes for rid 0x14 type 4 at 0xe480
puc0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe400
puc0: Reserved 0x8 bytes for rid 0x1c type 4 at 0xe080
sio4: <NetMos NM9845 Quad UART> on puc0
sio4: type 16550A
sio4: unable to activate interrupt in fast mode - using normal mode
sio5: <NetMos NM9845 Quad UART> on puc0
sio5: type 16550A
sio5: unable to activate interrupt in fast mode - using normal mode
sio6: <NetMos NM9845 Quad UART> on puc0
sio6: type 16550A
sio6: unable to activate interrupt in fast mode - using normal mode
sio7: <NetMos NM9845 Quad UART> on puc0
sio7: type 16550A
sio7: unable to activate interrupt in fast mode - using normal mode
Qlogic ISP Driver, FreeBSD Version 5.9, Core Version 2.9
isp0: <Qlogic ISP 1020/1040 PCI SCSI Adapter> port 0xd800-0xd8ff mem
0xf7ff7000-0xf7ff7fff irq 23 at device 11.0 on pci2
isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xf7ff7000
isp0: using Memory space register mapping
isp0: [GIANT-LOCKED]
isp0: Differential Mode
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, resident F/W Revision 2.26.0
isp0: Last F/W revision was 2.26.0
isp0: 401 max I/O commands supported
isp0: Initiator ID is 7 on Channel 0
atapci0: <Promise PDC20580 SATA150 controller> port
0xd480-0xd4ff,0xd000-0xd0ff mem 0xf7ff6000-0xf7ff6fff,0xf7fc0000-0xf7fdffff irq
21 at device 13.0 on pci2
atapci0: rid 0x20 is memory, requested 4
atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xf7fc0000
atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xf7ff6000
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect ready time=0ms
ata3: sata_connect devices=0x1<ATA_MASTER>
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
ata4: reset tp1 mask=03 ostat0=e0 ostat1=f0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat1=0xb0 err=0xb0 lsb=0xb0 msb=0xb0
ata4: reset tp2 stat0=a0 stat1=b0 devices=0x0
ata4: [MPSAFE]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=01 ostat0=00 ostat1=ff
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
atapci2: <Intel ICH5 SATA150 controller> port
0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f irq 18 at
device 31.2 on pci0
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb400
atapci2: [MPSAFE]
atapci2: failed to enable memory mapping!
ata5: <ATA channel 0> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xbc00
atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xb880
ata5: reset tp1 mask=01 ostat0=80 ostat1=00
ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata6: <ATA channel 1> on atapci2
atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb800
atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb480
ata6: reset tp1 mask=01 ostat0=7f ostat1=00
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff
ata6: reset tp2 stat0=ff stat1=00 devices=0x0
ata6: [MPSAFE]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xc000-0xc0ff,0xc400-0xc43f mem
0xf6fff800-0xf6fff9ff,0xf6fff400-0xf6fff4ff irq 17 at device 31.5 on pci0
pcm0: Reserved 0x200 bytes for rid 0x18 type 3 at 0xf6fff800
pcm0: Reserved 0x100 bytes for rid 0x1c type 3 at 0xf6fff400
pcm0: [MPSAFE]
pcm0: <Analog Devices AD1985 AC97 Codec (id = 0x41445375)>
pcm0: Codec features headphone, 20 bit DAC, 5 bit master volume, no 3D Stereo
Enhancement
pcm0: Primary codec extended features variable rate PCM, double rate PCM,
reserved 1, center DAC, surround DAC, LFE DAC, AMAP
pcm0: ac97 codec dac ready count: 0
pcm0: sndbuf_setmap 1f389000, 4000; 0xd9a72000 -> 1f389000
pcm0: sndbuf_setmap 1f382000, 4000; 0xd9a76000 -> 1f382000
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 4 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0xcc21 0xcc31 0xcc21 0xcc21
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0xcc21 0xcc29 0xcc21 0xcc21
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc87ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99952223 hz
Timecounter "TSC" frequency 2398854100 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Waiting 3 seconds for SCSI devices to settle
isp0: driver initiated bus reset of bus 0
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on Intel ICH5 chip
acd0: setting UDMA33 on Intel ICH5 chip
acd0: <NEC DVD RW ND-2510A/2.15> DVDR drive at ata0 as master
acd0: read 6890KB/s (6890KB/s) write 5512KB/s (5512KB/s), 2048KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, DVDR, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-master: pio=PIO3 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
acd1: setting PIO3 on Intel ICH5 chip
acd1: <CD-532E/1.0A> CDROM drive at ata1 as master
acd1: read 5512KB/s (5512KB/s), 128KB buffer, PIO3
acd1: Reads: CDDA stream
acd1: Writes:
acd1: Audio: play, 16 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 238475MB <Maxtor 7Y250M0 YAR51KW0> at ata2-master SATA150
ad4: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
********* ATA Promise FastTrak Metadata *********
promise_id <Promise Technology, Inc.>
dummy_0 0x00020000
magic_0 0x0000000000000000
magic_1 0x1222
magic_2 0x00172a4f
integrity 0x00000080 80<VALID>
flags 0x07 7<ASSIGNED,ONLINE,VALID>
disk_number 0
channel 0x00
device 0x00
magic_0 0x0000000000000000
disk_offset 0
disk_sectors 488397105
rebuild_lba 0xffffffff
generation 0x0002
status 0x8f 8f<READY,INITED,ONLINE,VALID>
type RAID1
total_disks 2
stripe_shift 7
array_width 1
array_number 0
total_sectors 488281250
cylinders 30393
heads 254
sectors 63
magic_1 0x000000172a4f1222
DISK# flags dummy_0 channel device magic_0
0 7<ASSIGNED,ONLINE,VALID> 0x00 0x00 0x00 0x0000000000000000
1 7<ASSIGNED,ONLINE,VALID> 0x00 0x01 0x00 0x0000000000000000
2 0 0x00 0x00 0x00 0x0000000000000000
3 0 0x00 0x00 0x00 0x0000000000000000
4 0 0x00 0x00 0x00 0x0000000000000000
5 0 0x00 0x00 0x00 0x0000000000000000
6 0 0x00 0x00 0x00 0x0000000000000000
7 0 0x00 0x00 0x00 0x0000000000000000
checksum 0xbde37e9c
================================================ata1-master: pio=PIO4 wdma=WDMA2
udma=UDMA100 cable=40 wire
ad6: 238475MB <Maxtor 7Y250M0 YAR51KW0> at ata3-master SATA150
ad6: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue
********* ATA Promise FastTrak Metadata *********
promise_id <Promise Technology, Inc.>
dummy_0 0x00020000
magic_0 0x0000000000000000
magic_1 0x1222
magic_2 0x00172a4f
integrity 0x00000080 80<VALID>
flags 0x07 7<ASSIGNED,ONLINE,VALID>
disk_number 1
channel 0x01
device 0x00
magic_0 0x0000000000000000
disk_offset 0
disk_sectors 488397105
rebuild_lba 0xffffffff
generation 0x0002
status 0x8f 8f<READY,INITED,ONLINE,VALID>
type RAID1
total_disks 2
stripe_shift 7
array_width 1
array_number 0
total_sectors 488281250
cylinders 30393
heads 254
sectors 63
magic_1 0x000000172a4f1222
DISK# flags dummy_0 channel device magic_0
0 7<ASSIGNED,ONLINE,VALID> 0x00 0x00 0x00 0x0000000000000000
1 7<ASSIGNED,ONLINE,VALID> 0x00 0x01 0x00 0x0000000000000000
2 0 0x00 0x00 0x00 0x0000000000000000
3 0 0x00 0x00 0x00 0x0000000000000000
4 0 0x00 0x00 0x00 0x0000000000000000
5 0 0x00 0x00 0x00 0x0000000000000000
6 0 0x00 0x00 0x00 0x0000000000000000
7 0 0x00 0x00 0x00 0x0000000000000000
checksum 0xbde47f9c
================================================ata0-master: pio=PIO4 wdma=WDMA2
udma=UDMA133 cable=40 wire
ad10: 156334MB <Maxtor 6B160M0 BANC1BY0> at ata5-master SATA150
ad10: 320173056 sectors [317632C/16H/63S] 16 sectors/interrupt 1 depth queue
ad10: Intel check1 failed
ad10: Adaptec check1 failed
ad10: LSI (v3) check1 failed
ad10: LSI (v2) check1 failed
ad10: FreeBSD check1 failed
pcm0: measured ac97 link rate at 48010 Hz, will use 48000 Hz
GEOM: new disk ad4
GEOM: new disk ad6
GEOM: new disk ad10
pass0 at ata0 bus 0 target 0 lun 0
pass0: <_NEC DVD_RW ND-2510A 2.15> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 33.000MB/s transfers
pass1 at ata1 bus 0 target 0 lun 0
pass1: <TEAC CD-532E 1.0A> Removable CD-ROM SCSI-0 device
pass1: Serial Number \^_
pass1: 11.000MB/s transfers
GEOM: new disk cd0
GEOM: new disk cd1
ATA PseudoRAID loaded
********** ATA PseudoRAID ar0 Metadata **********
================================================format Promise
Fasttrak
type RAID1
flags 0x01 1<READY>
magic_0 0x0000000000000000
magic_1 0x000000172a4f1222
generation 2
total_sectors 488281250
offset_sectors 0
heads 255
sectors 63
cylinders 30394
width 1
interleave 128
total_disks 2
disk 0: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad4: sectors 488397105
disk 1: flags = 0x0b b<ONLINE,ASSIGNED,PRESENT>
ad6: sectors 488397105
================================================ar0: 238418MB <Promise
Fasttrak RAID1> status: READY
ar0: 488281250 sectors [30394C/255H/63S] <> subdisks defined as:
ar0: disk0 READY (master) using ad4 at ata2-master
ar0: disk1 READY (mirror) using ad6 at ata3-master
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 7 (ISA IRQ 7) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <_NEC DVD_RW ND-2510A 2.15> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd1:ata1:0:0:0): error 6
(cd1:ata1:0:0:0): Unretryable Error
cd1 at ata1 bus 0 target 0 lun 0
cd1: <TEAC CD-532E 1.0A> Removable CD-ROM SCSI-0 device
cd1: Serial Number \^_
cd1: 11.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd1:ata1:0:0:0): error 6
(cd1:ata1:0:0:0): Unretryable Error
(cd1:ata1:0:0:0): error 6
(cd1:ata1:0:0:0): Unretryable Error
(cd1:ata1:0:0:0): error 6
(cd1:ata1:0:0:0): Unretryable Error
GEOM: new disk ar0
Trying to mount root from ufs:/dev/ar0s2a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered