Hi,
I'm having problem with sk and fxp NIC. I get fxp0: device timeout
and sk0: watchdog timeout problems and network stops responding.
gw# uname -an
FreeBSD xx.xx.xx 6.0-STABLE FreeBSD 6.0-STABLE #2: Mon Jan 16
12:09:59 UTC 2006 otgonpurev@xx.xx.xx:/usr/obj/usr/src/sys/GATEWAY i386
Message log:
Jan 17 18:15:22 gw kernel: fxp0: device timeout
Jan 17 18:15:25 gw kernel: sk0: watchdog timeout
Jan 17 18:15:25 gw kernel: sk0: link state changed to DOWN
Jan 17 18:15:41 gw kernel: sk0: watchdog timeout
Jan 17 18:15:53 gw kernel: fxp0: device timeout
Jan 17 18:16:29 gw kernel: fxp0: device timeout
Jan 17 18:17:07 gw kernel: fxp0: device timeout
Jan 17 18:17:19 gw kernel: sk0: watchdog timeout
Jan 17 18:17:42 gw kernel: fxp0: device timeout
Jan 17 18:17:59 gw kernel: sk0: watchdog timeout
Jan 17 18:18:19 gw kernel: sk0: watchdog timeout
Jan 17 18:18:53 gw kernel: sk0: watchdog timeout
pciconf -lv output:
skc0@pci0:1:0: class=0x020000 card=0x4c001186 chip=0x4c001186
rev=0x11 hdr=0x00
vendor = 'D-Link System Inc'
device = 'DGE-530T Gigabit Ethernet Adapter'
class = network
subclass = ethernet
fxp0@pci1:2:0: class=0x020000 card=0x01f11014 chip=0x12298086
rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter'
class = network
subclass = ethernet
dmesg.boot:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-STABLE #2: Mon Jan 16 12:09:59 UTC 2006
otgonpurev@xx.xx.xx:/usr/obj/usr/src/sys/GATEWAY
ACPI APIC Table: <IBM SERMOHIC>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium III/Pentium III Xeon/Celeron (548.54-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536854528 (511 MB)
avail memory = 515850240 (491 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 1
cpu1 (AP): APIC ID: 0
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM SERMOHIC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe88-0xfe8b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
skc0: <D-Link DGE-530T Gigabit Ethernet> port 0x2000-0x20ff mem
0xfebfc000-0xfebfffff irq 18 at device 1.0 on pci0
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x1)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:95:e1:7d:16
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseTX-FDX, auto
ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x2200-0x22ff mem
0xfebfb000-0xfebfbfff irq 16 at device 6.0 on pci0
ahc1: [GIANT-LOCKED]
aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs
pci0: <display, VGA> at device 10.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xfe00-0xfe0f at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 18 at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xff700000-0xff700fff irq
18 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4b00-0x4b3f mem
0xc0fdf000-0xc0fdffff,0xc0fa0000-0xc0fbffff irq 19 at device 2.0 o
n pci1
miibus1: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus1
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:03:47:e0:64:3c
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcd000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IP Filter: v4.1.8 initialized. Default = pass all, Logging = enabled
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding
disabled, default to accept, logging limited to 100 packets/
entry by default
Waiting 5 seconds for SCSI devices to settle
ses0 at ahc1 bus 0 target 14 lun 0
ses0: <SDR GEM200 2> Fixed Processor SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc1 bus 0 target 0 lun 0
da0: <IBM DPSS-318350M S96H> Fixed Direct Access SCSI-3 device
da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C)
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/da0s1a
ifconfig output:
sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 175.176.1.11 netmask 0xffff0000 broadcast 175.176.255.255
ether 00:11:95:e1:7d:16
media: Ethernet autoselect (1000baseTX <full-duplex,flag0,flag1>)
status: active
fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=b<RXCSUM,TXCSUM,VLAN_MTU>
inet 202.72.245.xxx netmask 0xfffffff0 broadcast 202.72.245.xxx
ether 00:03:47:e0:64:3c
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
I used new if_sk codes from Pyun YongHyeon but after 2 days I got
same problem device timeout.
fxp is also timing out and I don't know why.
Any idea?
thanks,
Ganbold
Pyun YongHyeon
2006-Jan-17 17:54 UTC
fxp0: device timeout and sk0: watchdog timeout problems
On Wed, Jan 18, 2006 at 09:27:09AM +0800, Ganbold wrote: > Hi, > > I'm having problem with sk and fxp NIC. I get fxp0: device timeout > and sk0: watchdog timeout problems and network stops responding. > > gw# uname -an > FreeBSD xx.xx.xx 6.0-STABLE FreeBSD 6.0-STABLE #2: Mon Jan 16 > 12:09:59 UTC 2006 otgonpurev@xx.xx.xx:/usr/obj/usr/src/sys/GATEWAY i386 > > Message log: > Jan 17 18:15:22 gw kernel: fxp0: device timeout > Jan 17 18:15:25 gw kernel: sk0: watchdog timeout > Jan 17 18:15:25 gw kernel: sk0: link state changed to DOWN > Jan 17 18:15:41 gw kernel: sk0: watchdog timeout > Jan 17 18:15:53 gw kernel: fxp0: device timeout > Jan 17 18:16:29 gw kernel: fxp0: device timeout > Jan 17 18:17:07 gw kernel: fxp0: device timeout > Jan 17 18:17:19 gw kernel: sk0: watchdog timeout > Jan 17 18:17:42 gw kernel: fxp0: device timeout > Jan 17 18:17:59 gw kernel: sk0: watchdog timeout > Jan 17 18:18:19 gw kernel: sk0: watchdog timeout > Jan 17 18:18:53 gw kernel: sk0: watchdog timeout > > pciconf -lv output: > > skc0@pci0:1:0: class=0x020000 card=0x4c001186 chip=0x4c001186 > rev=0x11 hdr=0x00 > vendor = 'D-Link System Inc' > device = 'DGE-530T Gigabit Ethernet Adapter' > class = network > subclass = ethernet > fxp0@pci1:2:0: class=0x020000 card=0x01f11014 chip=0x12298086 > rev=0x0c hdr=0x00 > vendor = 'Intel Corporation' > device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter' > class = network > subclass = ethernet > > dmesg.boot: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 6.0-STABLE #2: Mon Jan 16 12:09:59 UTC 2006 > otgonpurev@xx.xx.xx:/usr/obj/usr/src/sys/GATEWAY > ACPI APIC Table: <IBM SERMOHIC> > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Pentium III/Pentium III Xeon/Celeron (548.54-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x673 Stepping = 3 > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 536854528 (511 MB) > avail memory = 515850240 (491 MB) > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > cpu0 (BSP): APIC ID: 1 > cpu1 (AP): APIC ID: 0 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 1.1> irqs 0-23 on motherboard > npx0: [FAST] > npx0: <math processor> on motherboard > npx0: INT 16 interface > acpi0: <IBM SERMOHIC> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfe88-0xfe8b on acpi0 > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > skc0: <D-Link DGE-530T Gigabit Ethernet> port 0x2000-0x20ff mem > 0xfebfc000-0xfebfffff irq 18 at device 1.0 on pci0 > skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x1) > sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 > sk0: Ethernet address: 00:11:95:e1:7d:16 > miibus0: <MII bus> on sk0 > e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, > 1000baseTX-FDX, auto > ahc0: <Adaptec aic7895 Ultra SCSI adapter> port 0x2200-0x22ff mem > 0xfebfb000-0xfebfbfff irq 16 at device 6.0 on pci0 > ahc1: [GIANT-LOCKED] > aic7895C: Ultra Wide Channel B, SCSI Id=7, 32/253 SCBs > pci0: <display, VGA> at device 10.0 (no driver attached) > isab0: <PCI-ISA bridge> port 0xfe00-0xfe0f at device 15.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <GENERIC ATA controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf irq 18 at device 15.1 on > pci0 > ata0: <ATA channel 0> on atapci0 > ata1: <ATA channel 1> on atapci0 > ohci0: <OHCI (generic) USB controller> mem 0xff700000-0xff700fff irq > 18 at device 15.2 on pci0 > ohci0: [GIANT-LOCKED] > usb0: OHCI version 1.0, legacy support > usb0: <OHCI (generic) USB controller> on ohci0 > usb0: USB revision 1.0 > uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > pcib1: <ACPI Host-PCI bridge> on acpi0 > pci1: <ACPI PCI bus> on pcib1 > fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4b00-0x4b3f mem > 0xc0fdf000-0xc0fdffff,0xc0fa0000-0xc0fbffff irq 19 at device 2.0 o > n pci1 > miibus1: <MII bus> on fxp0 > inphy0: <i82555 10/100 media interface> on miibus1 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp0: Ethernet address: 00:03:47:e0:64:3c > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0 > fdc0: [FAST] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on > acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xcd000-0xce7ff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounters tick every 1.000 msec > IP Filter: v4.1.8 initialized. Default = pass all, Logging = enabled > ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding > disabled, default to accept, logging limited to 100 packets/ > entry by default > Waiting 5 seconds for SCSI devices to settle > ses0 at ahc1 bus 0 target 14 lun 0 > ses0: <SDR GEM200 2> Fixed Processor SCSI-2 device > ses0: 3.300MB/s transfers > ses0: SAF-TE Compliant Device > da0 at ahc1 bus 0 target 0 lun 0 > da0: <IBM DPSS-318350M S96H> Fixed Direct Access SCSI-3 device > da0: 11.626MB/s transfers (5.813MHz, offset 8, 16bit), Tagged Queueing > Enabled > da0: 17501MB (35843670 512 byte sectors: 255H 63S/T 2231C) > SMP: AP CPU #1 Launched! > Trying to mount root from ufs:/dev/da0s1a > > ifconfig output: > > sk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=b<RXCSUM,TXCSUM,VLAN_MTU> > inet 175.176.1.11 netmask 0xffff0000 broadcast 175.176.255.255 > ether 00:11:95:e1:7d:16 > media: Ethernet autoselect (1000baseTX <full-duplex,flag0,flag1>) > status: active > fxp0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=b<RXCSUM,TXCSUM,VLAN_MTU> > inet 202.72.245.xxx netmask 0xfffffff0 broadcast 202.72.245.xxx > ether 00:03:47:e0:64:3c > media: Ethernet autoselect (100baseTX <full-duplex>) > status: active > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > inet 127.0.0.1 netmask 0xff000000 > > I used new if_sk codes from Pyun YongHyeon but after 2 days I got > same problem device timeout. > fxp is also timing out and I don't know why. > Any idea? > If sk(4) is the cause of problem fxp wouldn't be affected. Of course it's possible for sk(4) to corrupt kernel memory structure but the possibility is low. While fixing sk(4) I pushed sk(4) to the limit on sparc64. I never met such timeouts. atm I have no clue. How about updated sk(4)? http://people.freebsd.org/~yongari/sk/if_sk.c http://people.freebsd.org/~yongari/sk/if_skreg.h Disabling sk(4) remedy your issue? -- Regards, Pyun YongHyeon