I'm trying to upgrade a July 27 RELENG_5 box to today's RELENG_6. I got
through buildworld and make kernel, but upon rebooting I get dropped into a
mountroot prompt. Choosing '?' there only shows fd0. It's trying to
mount
root from /dev/ad0s1a, which is correct. Booting in safe mode mounts root
fine and gives me a fully usable system, while booting with just ACPI
disabled gives me a "fatal trap 12: page fault while in kernel mode"
panic
well before it tries to mount root.
A verbose dmesg from a failed boot (single user) is attached. My /etc/fstab is
below, though I don't think that's the issue.
Any ideas what the problem is?
Thanks,
-David
yggdrasil> cat /etc/fstab
# Device Mountpoint FStype Options Dump Pass#
/dev/ad0s1b none swap sw 0 0
/dev/ad0s1a / ufs rw 1 1
/dev/ad0s1e /tmp ufs rw 2 2
/dev/ad0s1f /usr ufs rw 2 2
/dev/ad0s1d /var ufs rw 2 2
/dev/acd0 /cdrom cd9660 ro,noauto 0 0
/dev/acd1 /cdrom1 cd9660 ro,noauto 0 0
--
"What's the good of having mastery over
cosmic balance and knowing the secrets of
fate if you can't blow something up?"
-Terry Pratchett
-------------- next part --------------
FreeBSD 6.0-STABLE #0: Sun Dec 25 04:20:20 PST 2005
root@yggdrasil.seektruth.org:/usr/obj/usr/src/sys/YGGDRASIL
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0775000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0775204.
Calibrating clock(s) ... i8254 clock: 1193168 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1526538794 Hz
CPU: AMD Athlon(tm) Processor (1526.54-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x662 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
AMD Features=0xc0480800<SYSCALL,MP,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000001f6b7fff, 518598656 bytes (126611 pages)
avail memory = 520134656 (496 MB)
Table 'FACP' at 0x1fffb2fd
Table 'APIC' at 0x1ffffb88
MADT: Found table at 0x1ffffb88
MP Configuration Table version 1.4 found at 0xc009fc70
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 3 ACPI ID 0: enabled
ACPI APIC Table: <PTLTD APIC >
bios32: Found BIOS32 Service Directory header at 0xc00f77c0
bios32: Entry = 0xfd6d0 (c00fd6d0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd6d0+0x11e
pnpbios: Found PnP BIOS data at 0xc00f7810
pnpbios: Entry = f0000:a07e Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 0, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
lapic3: Routing NMI -> LINT1
lapic3: LINT1 trigger: edge
lapic3: LINT1 polarity: high
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 11 polarity: low
ioapic0: intpin 11 trigger: level
ioapic0 <Version 1.1> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x03000000 VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80002104
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=700e1022)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00fdf20
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 1 5 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x01 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x02 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 A 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 B 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 C 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 1 0 13 D 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 A 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 B 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 C 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 2 0 14 D 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 3 0 15 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 A 0x03 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 B 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 C 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 4 0 11 D 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 A 0x05 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 B 0x01 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 C 0x02 3 4 5 6 7 9 10 11 12 14 15
slot 5 0 12 D 0x03 3 4 5 6 7 9 10 11 12 14 15
embedded 0 18 A 0x02 3 4 5 6 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 4 func 0
AcpiOsDerivePciId: bus 0 dev 4 func 5
AcpiOsDerivePciId: bus 0 dev 13 func 0
AcpiOsDerivePciId: bus 0 dev 14 func 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
AcpiOsDerivePciId: bus 0 dev 11 func 0
AcpiOsDerivePciId: bus 0 dev 12 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 11 N 0 3 4 5 6 7 9 10 11 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 3 4 5 6 7 9 10 11 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 3 4 5 6 7 9 10 11 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 9 N 0 3 4 5 6 7 9 10 11 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 14 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 9 14 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 9 14 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 6 7 9 14 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 14 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 14 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 10 14 15
ACPI-1304: *** Error: Method execution failed
[\\_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node 0xc2f191c0), AE_AML_BUFFER_LIMIT
ACPI-0239: *** Error: Method execution failed
[\\_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node 0xc2f191c0), AE_AML_BUFFER_LIMIT
can't fetch resources for \\_SB_.PCI0.PIB_.SIO0.LPT_ - AE_AML_BUFFER_LIMIT
ACPI timer: 1/2 0/3 0/3 0/3 0/3 0/3 1/1 0/3 0/3 1/2 -> 3
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI: Found matching pin for 0.4.INTD at func 2: 9
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1022, dev=0x700e, revid=0x13
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 3, range 32, base e0001000, size 12, enabled
map[18]: type 4, range 32, base 00001870, size 2, port disabled
found-> vendor=0x1022, dev=0x700f, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1106, dev=0x0686, revid=0x40
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x008f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001860, size 4, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001800, size 5, enabled
pcib0: matched entry for 0.4.INTD (src \\_SB_.PCI0.PIB_.LNKU:0)
ioapic0: Changing trigger for pin 9 to level
ioapic0: Changing polarity for pin 9 to low
pcib0: slot 4 INTD routed to irq 9 via \\_SB_.PCI0.PIB_.LNKU
found-> vendor=0x1106, dev=0x3038, revid=0x16
bus=0, slot=4, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=16 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.4.INTD (src \\_SB_.PCI0.PIB_.LNKU:0)
pcib0: slot 4 INTD routed to irq 9 via \\_SB_.PCI0.PIB_.LNKU
found-> vendor=0x1106, dev=0x3057, revid=0x40
bus=0, slot=4, func=4
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1102, dev=0x0002, revid=0x07
bus=0, slot=13, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=11
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001840, size 5, enabled
pcib0: matched entry for 0.13.INTA
pcib0: slot 13 INTA hardwired to IRQ 16
found-> vendor=0x1102, dev=0x7002, revid=0x07
bus=0, slot=13, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001880, size 3, enabled
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 1, range 32, base e0000000, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 17
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xe1000000-0xe1ffffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
found-> vendor=0x10de, dev=0x0150, revid=0xa4
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x28 (1200 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base e1000000, size 24, enabled
pcib1: (null) requested memory range 0xe1000000-0xe1ffffff: good
map[14]: type 3, range 32, base f0000000, size 27, enabled
pcib1: (null) requested memory range 0xf0000000-0xf7ffffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 16
pci1: <display, VGA> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C686B UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1860-0x186f at device 4.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1860
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=50
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=51 ostat1=50
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 4.2 (no driver attached)
pci0: <serial bus, USB> at device 4.3 (no driver attached)
pci0: <serial bus, SMBus> at device 4.4 (no driver attached)
pcm0: <Creative EMU10K1> port 0x1840-0x185f irq 16 at device 13.0 on pci0
pcm0: Reserved 0x20 bytes for rid 0x10 type 4 at 0x1840
emu: setmap (1f6000, 800), nseg=1, error=0
emu: setmap (215000, 1000), nseg=1, error=0
pcm0: <SigmaTel STAC9708/11 AC97 Codec (id = 0x83847608)>
pcm0: Codec features 18 bit DAC, 18 bit ADC, 5 bit master volume, SigmaTel 3D
Enhancement
pcm0: Primary codec extended features surround DAC
pcm0: [MPSAFE]
emu: setmap (213000, 1000), nseg=1, error=0
emu: setmap (23e000, 1000), nseg=1, error=0
emu: setmap (1dc000, 1000), nseg=1, error=0
emu: setmap (1fa000, 1000), nseg=1, error=0
pcm0: sndbuf_setmap 1d8000, 1000; 0xc2fe4000 -> 1d8000
pcm0: sndbuf_setmap 236000, 1000; 0xc2fe2000 -> 236000
rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x1400
rl0: <RealTek 8139 10/100BaseTX> port 0x1400-0x14ff mem
0xe0000000-0xe00000ff irq 17 at device 18.0 on pci0
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
rl0: Ethernet address: 00:e0:18:40:b6:0f
rl0: [MPSAFE]
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0xe001 0xe011 0xe001 0xe001
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0xe001 0xe009 0xe001 0xe001
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x378-0x37f on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppbus0: IEEE1284 device found /NIBBLE/ECP/NIBBLE_ID/ECP_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 880C> MLC,PCL,PML
lpt0: <Printer> on ppbus0
lpt0: Polled port
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xdc000-0xdffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 132742074 hz
Timecounter "TSC" frequency 1526538794 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding disabled,
default to deny, logging disabled
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=58 ostat1=08
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: reinit done ..
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=58 ostat1=08
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=58
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=00 ostat1=58
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=08 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ata1: reiniting channel ..
ata1: reset tp1 mask=03 ostat0=08 ostat1=00
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: reinit done ..
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
Trying to mount root from ufs:/dev/ad0s1a
Manual root filesystem specification:
<fstype>:<device> Mount <device> using filesystem
<fstype>
eg. ufs:da0s1a
? List valid disk boot devices
<empty line> Abort manual input
mountroot>
On Sunday 25 December 2005 21:37, David Syphers wrote:> yggdrasil> cat /etc/fstab > # Device Mountpoint FStype Options Dump > Pass# /dev/ad0s1b none swap sw 0 > 0 /dev/ad0s1a / ufs rw 1Just to humor us, can you first mount root then the swap device? So swap those entries. -- Melvyn Sopacua freebsd.stable@melvyn.homeunix.org FreeBSD 6.0-STABLE Qt: 3.3.5 KDE: 3.4.3
David Syphers
2005-Dec-25 16:40 UTC
"solved": Re: can't mount root after upgrade to RELENG_6
On Sunday 25 December 2005 12:37 pm, David Syphers wrote:> I'm trying to upgrade a July 27 RELENG_5 box to today's RELENG_6. I got > through buildworld and make kernel, but upon rebooting I get dropped into a > mountroot prompt. Choosing '?' there only shows fd0. It's trying to mount > root from /dev/ad0s1a, which is correct. Booting in safe mode mounts root > fine and gives me a fully usable systemApparently booting in safe mode disables apic. I was looking for differences between my old 5.x kernel and the new one, and realized I left 'device apic' in my new kernel. Rebuilding without it makes everything work fine. I just assumed apic would be safe because, well, it's in GENERIC... Turns out it's deadly to my system. Thanks to the couple folks who tried to help with this, even on a holiday. -David -- "What's the good of having mastery over cosmic balance and knowing the secrets of fate if you can't blow something up?" -Terry Pratchett