thr3ads.net - freebsd stable - cdboot troubles; 6.0 kernel hanging [Dec 2005]

If this information is useful, please help other people find it:
Share via:

Juergen Lock

2005-Dec-21 14:44 UTC

cdboot troubles; 6.0 kernel hanging

I have this box that apparently no longer likes FreeBSD's cdboot,
it prints something about BOOT/LOADER and then just reboots.
Any ideas how to debug something like that?  The box already has
FreeBSD installed (5.3 with some patches), and i tried copying the
6.0 kernel from disc1 and loading it manually at the loader prompt.
It hangs after printing (boot -v):
	GEOM: new disk ad0
	GEOM: new disk ad4

ad0 is on oboard pata (the board is a via kt400), ad4 is a single disk
on a Promise Fasttrack tx2200 sata controller.  I guess i could try
to build a 6.0 kernel with ddb, but what would i be looking for then
to find out why its hanging?  I'll append 5.3's boot -v dmesg.
(btw i see a lot more of the
	ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
lines with the 6.0 kernel than with 5.3...)

 Thanx,
	Juergen

-------snip----
	penalty:	   480   480   530  5480  5480  5480  5480  5480 50480 50480100480
pcib0: slot 9 INTA routed to irq 11 via \\_SB_.PCI0.LNKB
found->	vendor=0x105a, dev=0x3571, revid=0x02
	bus=0, slot=9, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=1 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D3  current D0
	map[10]: type 1, range 32, base e8120000, size 17, enabled
	map[14]: type 1, range 32, base e8140000, size 17, enabled
	map[18]: type 4, range 32, base 0000a800, size  6, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 12, priority 257160):
	interrupts:	    10     5    11    12     7     6     4     3    15    14     1
	penalty:	   960  1010  1080  5960  5960  5960  5960  5960 50960 50960100960
\\_SB_.PCI0.LNKC (references 12, priority 257160):
	interrupts:	    10     5    11    12     7     6     4     3    15    14     1
	penalty:	   960  1010  1080  5960  5960  5960  5960  5960 50960 50960100960
\\_SB_.PCI0.LNKD (references 12, priority 257160):
	interrupts:	    10     5    11    12     7     6     4     3    15    14     1
	penalty:	   960  1010  1080  5960  5960  5960  5960  5960 50960 50960100960
pcib0: slot 10 INTA routed to irq 10 via \\_SB_.PCI0.LNKC
found->	vendor=0x8086, dev=0x1076, revid=0x00
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 4, range 32, base 0000ac00, size  8, enabled
	map[14]: type 1, range 32, base e8181000, size  8, enabled
	map[18]: type 1, range 32, base e8182000, size 12, enabled
pcib0: matched entry for 0.11.INTA (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 12, priority 263050):
	interrupts:	     5    11    10    12     7     6     4     3    15    14     1
	penalty:	  1490  1560  1560  6440  6440  6440  6440  6440 51440 51440101440
\\_SB_.PCI0.LNKD (references 12, priority 263050):
	interrupts:	     5    11    10    12     7     6     4     3    15    14     1
	penalty:	  1490  1560  1560  6440  6440  6440  6440  6440 51440 51440101440
pcib0: slot 11 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
found->	vendor=0x1000, dev=0x000f, revid=0x26
	bus=0, slot=11, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D3  current D0
pci0:12:0: Transition from D2 to D0
	map[10]: type 4, range 32, base 0000b000, size  6, enabled
pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts:  1  3  4  5  6  7 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 12, priority 268941):
	interrupts:	     5    10    11    12     7     6     4     3    15    14     1
	penalty:	  1970  2040  2160  6920  6920  6920  6920  6920 51920 51920101920
pcib0: slot 12 INTA routed to irq 10 via \\_SB_.PCI0.LNKA
found->	vendor=0x1274, dev=0x1371, revid=0x08
	bus=0, slot=12, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=10
	powerspec 1  supports D0 D2 D3  current D0
	map[20]: type 4, range 32, base 0000b400, size  5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 16 INTA is already routed to irq 10
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000b800, size  5, enabled
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LNKB)
pcib0: slot 16 INTB is already routed to irq 11
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000bc00, size  5, enabled
pcib0: matched entry for 0.16.INTC (src \\_SB_.PCI0.LNKC)
pcib0: slot 16 INTC is already routed to irq 10
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e8183000, size  8, enabled
pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.LNKD)
pcib0: slot 16 INTD is already routed to irq 11
found->	vendor=0x1106, dev=0x3104, revid=0x82
	bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
found->	vendor=0x1106, dev=0x3177, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c000, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000c400, size  8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.LNKC)
pcib0: slot 17 INTC is already routed to irq 10
found->	vendor=0x1106, dev=0x3059, revid=0x50
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c800, size  8, enabled
	map[14]: type 1, range 32, base e8184000, size  8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 18 INTA is already routed to irq 10
found->	vendor=0x1106, dev=0x3065, revid=0x74
	bus=0, slot=18, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem
0xd0000000-0xd7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0x9fff
pcib1:   memory decode     0xe8000000-0xe80fffff
pcib1:   prefetched decode 0xd8000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd8000000-0xdfffffff
	map[14]: type 4, range 32, base 00009000, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x9000-0x90ff
	map[18]: type 1, range 32, base e8020000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xe8020000-0xe802ffff
pcib0: matched entry for 0.1.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 1 INTA is already routed to irq 10
pcib1: slot 0 INTA is routed to irq 10
found->	vendor=0x1002, dev=0x4144, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base e0000000, size 27, memory disabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe7ffffff
	map[14]: type 1, range 32, base e8030000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xe8030000-0xe803ffff
found->	vendor=0x1002, dev=0x4164, revid=0x00
	bus=1, slot=0, func=1
	class=03-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0080, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
atapci0: <Promise PDC20571 SATA150 controller> port
0xa400-0xa4ff,0xa000-0xa07f mem 0xe8100000-0xe811ffff,0xe8180000-0xe8180fff irq
11 at device 9.0 on pci0
atapci0: failed: rid 0x20 is memory, requested 4
atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xe8100000
atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xe8180000
atapci0: [MPSAFE]
ata2: channel #0 on atapci0
ata2: reset tp1 mask=01 ostat0=50 ostat1=50
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci0
ata3: reset tp1 mask=00 ostat0=ff ostat1=ff
ata3: [MPSAFE]
ata4: channel #2 on atapci0
ata4: reset tp1 mask=03 ostat0=a0 ostat1=b0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-master: stat=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4-slave:  stat=0xb0 err=0xb0 lsb=0xb0 msb=0xb0
ata4: reset tp2 stat0=a0 stat1=b0 devices=0x0
ata4: [MPSAFE]
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xa800-0xa83f mem 0xe8140000-0xe815ffff,0xe8120000-0xe813ffff irq 10 at device
10.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe8120000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xa800
em0: [GIANT-LOCKED]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:6d:38:a9
em0:  Speed:N/A  Duplex:N/A
sym0: <875> port 0xac00-0xacff mem
0xe8182000-0xe8182fff,0xe8181000-0xe81810ff irq 11 at device 11.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xe8181000
sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xe8182000
sym0: chip clock is 40401KHz
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 12.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 10 at device
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 10 at device
16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8183000-0xe81830ff irq 11 at
device 16.3 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe8183000
ehci0: [GIANT-LOCKED]
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
ehci_pci_attach: companion usb2
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8235 UDMA133 controller> port
0xc000-0xc00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000
ata0: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave:  stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc800-0xc8ff mem
0xe8184000-0xe81840ff irq 10 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 5
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0a:e6:55:d5:db
vr0: [GIANT-LOCKED]
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sc: sc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xe2000-0xe2fff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2075027952 Hz quality 800
Timecounters tick every 1.000 msec
i4bipr: 4 IP over raw HDLC ISDN device(s) attached (VJ header compression)
ipr0: bpf attached
ipr1: bpf attached
ipr2: bpf attached
ipr3: bpf attached
i4bctl: ISDN system control port attached
i4b: ISDN call control device attached
i4brbch: 4 raw B channel access device(s) attached
i4btel: 2 ISDN telephony interface device(s) attached
i4btrc: 4 ISDN trace device(s) attached
lo0: bpf attached
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 2 steps (100% to 50.0%), currently 100.0%
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA133 on VIA 8235 chip
ad0: <Maxtor 6Y080L0/YAR41VW0> ATA-7 disk at ata0-master
ad0: 78167MB (160086528 sectors), 158816 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA133
ar: FreeBSD check1 failed
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=80pin
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 8235 chip
ata1-master: setting UDMA33 on VIA 8235 chip
ata1-slave: setting PIO4 on VIA 8235 chip
ata1-slave: setting UDMA33 on VIA 8235 chip
acd0: <NEC DV-5800C/D9S2> DVDROM drive at ata1 as master
acd0: read 8268KB/s (8268KB/s), 512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: <HL-DT-ST DVDRAM GSA-4120B/A102> DVDR drive at ata1 as slave
acd1: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd1: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad4: <ST3160827AS/3.42> ATA-6 disk at ata2-master
ad4: 152627MB (312581808 sectors), 310101 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, SATA150
ar: Promise check1 failed
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
GEOM: new disk ad0
GEOM: new disk ad4
[0] f:00 typ:12 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:33559722
[1] f:80 typ:12 s(CHS):1023/255/63 e(CHS):1023/254/63 s:33559785 l:66974985
[2] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:100534770 l:33993540
[3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:134528310 l:25543350
GEOM: Configure ad0s1, start 32256 length 17182577664 end 17182609919
GEOM: Configure ad0s2, start 17182609920 length 34291192320 end 51473802239
GEOM: Configure ad0s3, start 51473802240 length 17404692480 end 68878494719
GEOM: Configure ad0s4, start 68878494720 length 13078195200 end 81956689919
[0] f:00 typ:5 s(CHS):1023/255/63 e(CHS):1023/254/63 s:248573745 l:64002960
[1] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:248573682
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 127269757440 length 32769515520 end 160039272959
GEOM: Configure ad4s2, start 32256 length 127269725184 end 127269757439
MBREXT Slice 5 on ad0s3:
[0] f:00 typ:131 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:32001417
[1] f:00 typ:5 s(CHS):1023/254/63 e(CHS):1023/254/63 s:32001480 l:1992060
GEOM: Configure ad0s5, start 32256 length 16384725504 end 16384757759
MBREXT Slice 6 on ad0s3:
[0] f:00 typ:130 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:1991997
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s6, start 16384790016 length 1019902464 end 17404692479
GEOM: Configure ad0s4a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s4b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad0s4c, start 0 length 13078195200 end 13078195199
GEOM: Configure ad0s4e, start 1342177280 length 10737418240 end 12079595519
GEOM: Configure ad0s4f, start 12079595520 length 998599680 end 13078195199
MBREXT Slice 5 on ad4s1:
[0] f:00 typ:12 s(CHS):1023/254/63 e(CHS):1023/254/63 s:63 l:64002897
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s5, start 32256 length 32769483264 end 32769515519
GEOM: Configure ad4s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad4s2b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad4s2c, start 0 length 127269725184 end 127269725183
GEOM: Configure ad4s2d, start 1342177280 length 125927547904 end 127269725183
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe4:ata2:0:0:0): error 22
(probe4:ata2:0:0:0): Unretryable Error
(probe5:ata2:0:1:0): error 22
(probe5:ata2:0:1:0): Unretryable Error
(probe6:ata3:0:0:0): error 22
(probe6:ata3:0:0:0): Unretryable Error
(probe7:ata3:0:1:0): error 22
(probe7:ata3:0:1:0): Unretryable Error
(probe8:ata4:0:0:0): error 22
(probe8:ata4:0:0:0): Unretryable Error
(probe9:ata4:0:1:0): error 22
(probe9:ata4:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe4:ata2:0:0:0): error 22
(probe4:ata2:0:0:0): Unretryable Error
(probe5:ata2:0:1:0): error 22
(probe5:ata2:0:1:0): Unretryable Error
(probe6:ata3:0:0:0): error 22
(probe6:ata3:0:0:0): Unretryable Error
(probe7:ata3:0:1:0): error 22
(probe7:ata3:0:1:0): Unretryable Error
(probe8:ata4:0:0:0): error 22
(probe8:ata4:0:0:0): Unretryable Error
(probe9:ata4:0:1:0): error 22
(probe9:ata4:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 6
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 6
(probe3:ata1:0:1:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): error 22
(probe3:ata1:0:1:0): Unretryable Error
(probe10:sym0:0:0:0): Retrying Command
(probe10:sym0:0:0:0): Retrying Command
(probe0:sym0:0:0:1): Device Busy
(probe0:sym0:0:0:1): Retrying Command
pass0 at sym0 bus 0 target 0 lun 0
pass0: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device 
pass0: Serial Number         AJ156082
pass0: 20.000MB/s transfers (20.000MHz, offset 16), Tagged Queueing Enabled
pass1 at ata1 bus 0 target 0 lun 0
pass1: <_NEC DV-5800C D9S2> Removable CD-ROM SCSI-0 device 
pass1: 33.000MB/s transfers
pass2 at ata1 bus 0 target 1 lun 0
pass2: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device 
pass2: 33.000MB/s transfers
GEOM: new disk cd0
GEOM: new disk cd1
GEOM: new disk da0
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
cd0 at ata1 bus 0 target 0 lun 0
cd0: <_NEC DV-5800C D9S2> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HL-DT-ST DVDRAM GSA-4120B A102> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd0:ata1:0:0:0): error 6
(cd0:ata1:0:0:0): Unretryable Error
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
(cd1:ata1:0:1:0): error 6
(cd1:ata1:0:1:0): Unretryable Error
da0 at sym0 bus 0 target 0 lun 0
da0: <IBM DNES-309170 SA30> Fixed Direct Access SCSI-3 device 
da0: Serial Number         AJ156082
da0: 20.000MB/s transfers (20.000MHz, offset 16), Tagged Queueing Enabled
da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
[0] f:00 typ:5 s(CHS):0/0/33 e(CHS):373/133/16 s:32 l:6000608
[1] f:80 typ:165 s(CHS):373/133/17 e(CHS):1023/54/27 s:6000640 l:11915264
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 16384 length 3072311296 end 3072327679
GEOM: Configure da0s2, start 3072327680 length 6100615168 end 9172942847
MBREXT Slice 5 on da0s1:
[0] f:80 typ:131 s(CHS):0/2/1 e(CHS):1023/63/32 s:32 l:6000576
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s5, start 16384 length 3072294912 end 3072311295
GEOM: Configure da0s2a, start 0 length 268435456 end 268435455
GEOM: Configure da0s2c, start 0 length 6100615168 end 6100615167
GEOM: Configure da0s2e, start 268435456 length 5832179712 end 6100615167
Mounting root from ufs:/dev/ad4s2a
start_init: trying /sbin/init
tun0: bpf attached
pflog0: bpf attached

Juergen Lock

2005-Dec-22 14:01 UTC

head link

cdboot troubles; 6.0 kernel hanging

On Wed, Dec 21, 2005 at 11:15:30PM +0100, Juergen Lock
wrote:> I have this box that apparently no longer likes FreeBSD's cdboot,
> it prints something about BOOT/LOADER and then just reboots.
> Any ideas how to debug something like that?  The box already has
> FreeBSD installed (5.3 with some patches), and i tried copying the
> 6.0 kernel from disc1 and loading it manually at the loader prompt.
> It hangs after printing (boot -v):
> 	GEOM: new disk ad0
> 	GEOM: new disk ad4
> 
> ad0 is on oboard pata (the board is a via kt400), ad4 is a single disk
> on a Promise Fasttrack tx2200 sata controller.  I guess i could try
> to build a 6.0 kernel with ddb, but what would i be looking for then
> to find out why its hanging?  [...]
I have now done that, here is a boot -v and ddb `ps' and `show thread'
log of the hanging RELENG_6_0 GENERIC with ddb, does that tell anyone
anything?  (i dunno if the `call boot' crash at the end is important,
probably not.)  I need help...

 Oh, would it help if i retried this with a -current kernel?
(I don't want to actually put -current on this box because it
is my router and i want it to be stable, i just wanted to upgrade
it to 6.0...)

----snip-----
OK boot -v -s
/boot/kernel/acpi.ko text=0x3fbfc data=0x1c04+0x112c
syms=[0x4+0x72f0+0x4+0x97c7]
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009a000
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000000001000
SMAP type=02 base=00000000fee00000 len=0000000000001000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
SMAP type=02 base=000000000009a000 len=0000000000006000
SMAP type=01 base=0000000000100000 len=000000001fef0000
SMAP type=03 base=000000001fff3000 len=000000000000d000
SMAP type=04 base=000000001fff0000 len=0000000000003000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE-p1 #1: Thu Dec 22 21:47:15 CET 2005
    nox@saturn:/usr/obj/usr/home/nox/src6/src/sys/GENERICDB
Preloaded elf kernel "/boot/kernel/kernel.60db" at 0xc0a98000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a9825c.
link_elf: symbol ioapic_enable_mixed_mode undefined
KLD file acpi.ko - could not finalize loading
MP Configuration Table version 1.1 found at 0xc00f1400
APIC: Using the MPTable enumerator.
MPTable: <OEM00000 PROD00000000>
Calibrating clock(s) ... i8254 clock: 1193267 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2075028490 Hz
CPU: AMD Athlon(tm) XP 2600+ (2075.03-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
 
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000099fff, 626688 bytes (153 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f6b7fff, 514404352 bytes (125587 pages)
avail memory = 516055040 (492 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf00
bios32: Entry = 0xfb370 (c00fb370)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb3a0
pnpbios: Bad PnP BIOS data checksum
Other BIOS signatures found:
ioapic0: Assuming intbase of 0
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 16 bus ISA
ioapic0: Routing IRQ 10 -> intpin 16
ioapic0: intpin 10 disabled
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 17 bus ISA
ioapic0: Routing IRQ 11 -> intpin 17
ioapic0: intpin 11 disabled
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 18 bus ISA
ioapic0: Routing IRQ 10 -> intpin 18
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 19 bus ISA
ioapic0: Routing IRQ 11 -> intpin 19
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 21 bus PCI
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
ioapic0: intpin 21 bus PCI
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
ioapic0: intpin 21 bus PCI
ioapic0: intpin 21 trigger: level
ioapic0: intpin 21 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 22 bus PCI
ioapic0: intpin 22 trigger: level
ioapic0: intpin 22 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 18 bus PCI
ioapic0: intpin 18 trigger: level
ioapic0: intpin 18 polarity: low
ioapic0: intpin 16 bus PCI
ioapic0: intpin 16 trigger: level
ioapic0: intpin 16 polarity: low
ioapic0: intpin 17 bus PCI
ioapic0: intpin 17 trigger: level
ioapic0: intpin 17 polarity: low
ioapic0: intpin 19 bus PCI
ioapic0: intpin 19 trigger: level
ioapic0: intpin 19 polarity: low
ioapic0: intpin 1 bus ISA
ioapic0: intpin 1 trigger: edge
ioapic0: intpin 1 polarity: high
ioapic0: intpin 2 bus ISA
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
ioapic0: intpin 3 bus ISA
ioapic0: intpin 3 trigger: edge
ioapic0: intpin 3 polarity: high
ioapic0: intpin 4 bus ISA
ioapic0: intpin 4 trigger: edge
ioapic0: intpin 4 polarity: high
ioapic0: intpin 5 bus ISA
ioapic0: intpin 5 trigger: edge
ioapic0: intpin 5 polarity: high
ioapic0: intpin 6 bus ISA
ioapic0: intpin 6 trigger: edge
ioapic0: intpin 6 polarity: high
ioapic0: intpin 7 bus ISA
ioapic0: intpin 7 trigger: edge
ioapic0: intpin 7 polarity: high
ioapic0: intpin 8 bus ISA
ioapic0: intpin 8 trigger: edge
ioapic0: intpin 8 polarity: high
ioapic0: intpin 9 bus ISA
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
ioapic0: intpin 12 bus ISA
ioapic0: intpin 12 trigger: edge
ioapic0: intpin 12 polarity: high
ioapic0: intpin 13 bus ISA
ioapic0: intpin 13 trigger: edge
ioapic0: intpin 13 polarity: high
ioapic0: intpin 14 bus ISA
ioapic0: intpin 14 trigger: edge
ioapic0: intpin 14 polarity: high
ioapic0: intpin 15 bus ISA
ioapic0: intpin 15 trigger: edge
ioapic0: intpin 15 polarity: high
lapic: Routing ExtINT -> LINT0
lapic: Routing NMI -> LINT1
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00000000 err: 0x00010000 pcm: 0x00010000
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=31891106)
pcibios: BIOS version 2.10
Found $PIR table, 12 entries at 0xc00fde90
PCI-Only Interrupts: 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 4      0   11    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 5      0   12    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 6      0   14    D   0x02  3 4 5 7 9 10 11 12 14 15
slot 7      0   15    A   0x05  3 4 5 7 9 10 11 12 14 15
slot 7      0   15    B   0x01  3 4 5 7 9 10 11 12 14 15
slot 7      0   15    C   0x02  3 4 5 7 9 10 11 12 14 15
slot 7      0   15    D   0x03  3 4 5 7 9 10 11 12 14 15
slot 8      0   13    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 8      0   13    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 8      0   13    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 8      0   13    D   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   16    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0   16    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   16    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   16    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   18    A   0x01  3 4 5 7 9 10 11 12 14 15
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
found->	vendor=0x1106, dev=0x3189, revid=0x00
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 3, range 32, base d0000000, size 27, enabled
found->	vendor=0x1106, dev=0xb168, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found->	vendor=0x105a, dev=0x3571, revid=0x02
	bus=0, slot=9, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=1 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x12 (4500 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D3  current D0
	map[10]: type 4, range 32, base 0000a000, size  7, enabled
	map[18]: type 4, range 32, base 0000a400, size  8, enabled
	map[1c]: type 1, range 32, base e8180000, size 12, enabled
	map[20]: type 1, range 32, base e8100000, size 17, enabled
pcib0: slot 9 INTA routed to irq 11
found->	vendor=0x8086, dev=0x1076, revid=0x00
	bus=0, slot=10, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type 1, range 32, base e8120000, size 17, enabled
	map[14]: type 1, range 32, base e8140000, size 17, enabled
	map[18]: type 4, range 32, base 0000a800, size  6, enabled
pcib0: slot 10 INTA routed to irq 10
found->	vendor=0x1000, dev=0x000f, revid=0x26
	bus=0, slot=11, func=0
	class=01-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x11 (4250 ns), maxlat=0x40 (16000 ns)
	intpin=a, irq=11
	powerspec 1  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000ac00, size  8, enabled
	map[14]: type 1, range 32, base e8181000, size  8, enabled
	map[18]: type 1, range 32, base e8182000, size 12, enabled
pcib0: slot 11 INTA routed to irq 11
found->	vendor=0x1274, dev=0x1371, revid=0x08
	bus=0, slot=12, func=0
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0105, statreg=0x0410, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
	intpin=a, irq=10
	powerspec 1  supports D0 D2 D3  current D0
	map[10]: type 4, range 32, base 0000b000, size  6, enabled
pcib0: slot 12 INTA routed to irq 10
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=0
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000b400, size  5, enabled
pcib0: slot 16 INTA routed to irq 21
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=1
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000b800, size  5, enabled
pcib0: slot 16 INTB routed to irq 21
found->	vendor=0x1106, dev=0x3038, revid=0x80
	bus=0, slot=16, func=2
	class=0c-03-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[20]: type 4, range 32, base 0000bc00, size  5, enabled
pcib0: slot 16 INTC routed to irq 21
found->	vendor=0x1106, dev=0x3104, revid=0x82
	bus=0, slot=16, func=3
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 1, range 32, base e8183000, size  8, enabled
pcib0: slot 16 INTD routed to irq 11
found->	vendor=0x1106, dev=0x3177, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=17, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000c000, size  4, enabled
found->	vendor=0x1106, dev=0x3059, revid=0x50
	bus=0, slot=17, func=5
	class=04-01-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c400, size  8, enabled
pcib0: slot 17 INTC routed to irq 22
found->	vendor=0x1106, dev=0x3065, revid=0x74
	bus=0, slot=18, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 4, range 32, base 0000c800, size  8, enabled
	map[14]: type 1, range 32, base e8184000, size  8, enabled
pcib0: slot 18 INTA routed to irq 10
agp0: <VIA 8377 (Apollo KT400/KT400A/KT600) host to PCI bridge> mem
0xd0000000-0xd7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xd0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0x9000-0x9fff
pcib1:   memory decode     0xe8000000-0xe80fffff
pcib1:   prefetched decode 0xd8000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
found->	vendor=0x1002, dev=0x4144, revid=0x00
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base d8000000, size 27, enabled
pcib1: (null) requested memory range 0xd8000000-0xdfffffff: good
	map[14]: type 4, range 32, base 00009000, size  8, enabled
pcib1: (null) requested I/O range 0x9000-0x90ff: in range
	map[18]: type 1, range 32, base e8020000, size 16, enabled
pcib1: (null) requested memory range 0xe8020000-0xe802ffff: good
pcib1: slot 0 INTA routed to irq 10
found->	vendor=0x1002, dev=0x4164, revid=0x00
	bus=1, slot=0, func=1
	class=03-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0080, statreg=0x02b0, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type 3, range 32, base e0000000, size 27, memory disabled
pcib1: (null) requested memory range 0xe0000000-0xe7ffffff: good
	map[14]: type 1, range 32, base e8030000, size 16, enabled
pcib1: (null) requested memory range 0xe8030000-0xe803ffff: good
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
atapci0: <Promise PDC20571 SATA150 controller> port
0xa000-0xa07f,0xa400-0xa4ff mem 0xe8180000-0xe8180fff,0xe8100000-0xe811ffff irq
11 at device 9.0 on pci0
atapci0: rid 0x20 is memory, requested 4
atapci0: Reserved 0x20000 bytes for rid 0x20 type 3 at 0xe8100000
atapci0: Reserved 0x1000 bytes for rid 0x1c type 3 at 0xe8180000
atapci0: [MPSAFE]
ata2: <ATA channel 0> on atapci0
ata2: SATA connect ready time=0ms
ata2: sata_connect devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci0
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci0
ata4: reset tp1 mask=03 ostat0=e0 ostat1=f0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat0=0xa0 err=0xa0 lsb=0xa0 msb=0xa0
ata4: stat1=0xb0 err=0xb0 lsb=0xb0 msb=0xb0
ata4: reset tp2 stat0=a0 stat1=b0 devices=0x0
ata4: [MPSAFE]
em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
0xa800-0xa83f mem 0xe8120000-0xe813ffff,0xe8140000-0xe815ffff irq 10 at device
10.0 on pci0
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xe8120000
em0: Reserved 0x40 bytes for rid 0x18 type 4 at 0xa800
em0: [MPSAFE]
em0: bpf attached
em0: Ethernet address: 00:0e:0c:6d:38:a9
em0:  Speed:N/A  Duplex:N/A
sym0: <875> port 0xac00-0xacff mem
0xe8181000-0xe81810ff,0xe8182000-0xe8182fff irq 11 at device 11.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0xe8181000
sym0: Reserved 0x1000 bytes for rid 0x18 type 3 at 0xe8182000
sym0: chip clock is 40401KHz
sym0: No NVRAM, ID 7, Fast-20, SE, parity checking
sym0: open drain IRQ line driver, using on-chip SRAM
sym0: using LOAD/STORE-based firmware.
sym0: [GIANT-LOCKED]
pci0: <multimedia, audio> at device 12.0 (no driver attached)
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 21 at device
16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb400
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 21 at device
16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xb800
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 21 at device
16.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xbc00
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xe8183000-0xe81830ff irq 11 at
device 16.3 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xe8183000
ehci0: [GIANT-LOCKED]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb0 usb1 usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8235 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 17.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc000
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc800-0xc8ff mem
0xe8184000-0xe81840ff irq 10 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc800
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 5
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:0a:e6:55:d5:db
vr0: [MPSAFE]
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xccfff,0xd0000-0xd7fff,0xe2000-0xe2fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x1d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 03 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 00 03 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: ic_type 90 part_id 80
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on isa0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0xc0c1 0xc0d1 0xc0c1 0xc0c1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0xc0c1 0xc0c9 0xc0c1 0xc0c1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 166001945 hz
Timecounter "TSC" frequency 2075028490 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=80 wire
ad0: setting PIO4 on VIA 8235 chip
ad0: setting UDMA133 on VIA 8235 chip
ad0: 78167MB <Maxtor 6Y080L0 YAR41VW0> at ata0-master UDMA133
ad0: 160086528 sectors [158816C/16H/63S] 16 sectors/interrupt 1 depth queue
ad0: VIA check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ata1-slave: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=80 wire
ata1-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting PIO4 on VIA 8235 chip
acd0: setting UDMA33 on VIA 8235 chip
acd0: <NEC DV-5800C/D9S2> DVDROM drive at ata1 as master
acd0: read 8268KB/s (8268KB/s), 512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acd1: setting PIO4 on VIA 8235 chip
acd1: setting UDMA33 on VIA 8235 chip
acd1: <HL-DT-ST DVDRAM GSA-4120B/A102> DVDR drive at ata1 as slave
acd1: read 6890KB/s (6890KB/s) write 6890KB/s (6890KB/s), 2048KB buffer, UDMA33
acd1: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd1: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: no/blank disc
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
ad4: Promise check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
ad4: FreeBSD check1 failed
Waiting 5 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
GEOM: new disk ad0
GEOM: new disk ad4
KDB: enter: Line break on console
[thread pid 11 tid 100005 ]
Stopped at      kdb_enter+0x2b: nop     
db> tr
Tracing pid 11 tid 100005 td 0xc1970780
kdb_enter(c088cf57) at kdb_enter+0x2b
siointr1(c1af4400) at siointr1+0xce
siointr(c1af4400) at siointr+0x38
intr_execute_handlers(c19a1090,d4480cb8,4,d4480cfc,c07ff6d3) at
intr_execute_handlers+0x85
lapic_handle_intr(34) at lapic_handle_intr+0x2e
Xapic_isr1() at Xapic_isr1+0x33
--- interrupt, eip = 0xc0806ba9, esp = 0xd4480cfc, ebp = 0xd4480cfc ---
cpu_idle_default(d4480d10,c0628949,c196fa3c,d4480d24,c06286f8) at
cpu_idle_default+0x5
cpu_idle(c196fa3c,d4480d24,c06286f8,0,d4480d38) at cpu_idle+0x1f
idle_proc(0,d4480d38) at idle_proc+0x11
fork_exit(c0628938,0,d4480d38) at fork_exit+0x70
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xd4480d6c, ebp = 0 ---
db> ps
  pid   proc     uid  ppid  pgrp  flag   stat  wmesg    wchan  cmd
   44 c1a9f830    0     0     0 0000204 [IWAIT] swi0: sio
    7 c1a9fa3c    0     0     0 0000204 [SLPQ - 0xc1a8de3c][SLP] fdc0
   43 c1a9fc48    0     0     0 0000204 [SLPQ usbevt 0xc1a57210][SLP] usb3
   42 c1aa0000    0     0     0 0000204 [SLPQ usbevt 0xc1a95210][SLP] usb2
   41 c19b3c48    0     0     0 0000204 [SLPQ usbevt 0xc1a81210][SLP] usb1
   40 c19c7000    0     0     0 0000204 [SLPQ usbtsk 0xc092e924][SLP] usbtask
   39 c19c720c    0     0     0 0000204 [SLPQ usbevt 0xc1a78210][SLP] usb0
   38 c19c7418    0     0     0 0000204 [IWAIT] swi2: cambio
    6 c19c7624    0     0     0 0000204 [SLPQ - 0xc1a66400][SLP] kqueue taskq
   37 c19c7830    0     0     0 0000204 [IWAIT] swi5:+
    5 c19c7a3c    0     0     0 0000204 [SLPQ - 0xc196e380][SLP] thread taskq
   36 c19c7c48    0     0     0 0000204 [IWAIT] swi6:+
   35 c19c9000    0     0     0 0000204 [IWAIT] swi6: task queue
   34 c19c920c    0     0     0 0000204 [SLPQ - 0xc092c640][SLP] yarrow
    4 c19c9418    0     0     0 0000204 [SLPQ - 0xc092ee08][SLP] g_down
    3 c19ab624    0     0     0 0000204 [SLPQ - 0xc092ee04][SLP] g_up
    2 c19ab830    0     0     0 0000204 [SLPQ - 0xc092edfc][SLP] g_event
   33 c19aba3c    0     0     0 0000204 [IWAIT] swi3: vm
   32 c19abc48    0     0     0 000020c [IWAIT] swi4: clock sio
   31 c19b3000    0     0     0 0000204 [IWAIT] swi1: net
   30 c19b320c    0     0     0 0000204 [IWAIT] irq23:
   29 c19b3418    0     0     0 0000204 [IWAIT] irq22:
   28 c19b3624    0     0     0 0000204 [IWAIT] irq21: uhci0 uhci1+
   27 c19b3830    0     0     0 0000204 [IWAIT] irq20:
   26 c19b3a3c    0     0     0 0000204 [IWAIT] irq11: atapci0 sym+
   25 c197520c    0     0     0 0000204 [IWAIT] irq10: em0 vr0
   24 c1975418    0     0     0 0000204 [IWAIT] irq15: ata1
   23 c1975624    0     0     0 0000204 [IWAIT] irq14: ata0
   22 c1975830    0     0     0 0000204 [IWAIT] irq13:
   21 c1975a3c    0     0     0 0000204 [IWAIT] irq12: psm0
   20 c1975c48    0     0     0 0000204 [IWAIT] irq9:
   19 c19ab000    0     0     0 0000204 [IWAIT] irq8:
   18 c19ab20c    0     0     0 0000204 [IWAIT] irq7: ppc0
   17 c19ab418    0     0     0 0000204 [IWAIT] irq6: fdc0
   16 c196f000    0     0     0 0000204 [IWAIT] irq5:
   15 c196f20c    0     0     0 0000204 [IWAIT] irq4: sio0
   14 c196f418    0     0     0 0000204 [IWAIT] irq3: sio1
   13 c196f624    0     0     0 0000204 [IWAIT] irq0:
   12 c196f830    0     0     0 0000204 [IWAIT] irq1: atkbd0
   11 c196fa3c    0     0     0 000020c [CPU 0] idle
    1 c196fc48    0     0     0 0000200 [INACTIVE] swapper
   10 c1975000    0     0     0 0000204 [SLPQ ktrace 0xc092f858][SLP] ktrace
    0 c092ef00    0     0     0 0000200 [SLPQ conifhk 0xc08d1fac][SLP] swapper
db> show thr
  100046 (0xc19b4d80)  sched_switch(c19b4d80,0,1) at sched_switch+0x14b
  100047 (0xc19b4c00)  sched_switch(c19b4c00,0,1) at sched_switch+0x14b
  100048 (0xc19b4a80)  sched_switch(c19b4a80,0,1) at sched_switch+0x14b
  100049 (0xc19b4900)  sched_switch(c19b4900,0,1) at sched_switch+0x14b
  100027 (0xc19b4180)  sched_switch(c19b4180,0,1) at sched_switch+0x14b
  100028 (0xc19b4000)  sched_switch(c19b4000,0,1) at sched_switch+0x14b
  100029 (0xc1976d80)  sched_switch(c1976d80,0,1) at sched_switch+0x14b
  100030 (0xc1976c00)  fork_trampoline() at fork_trampoline
  100031 (0xc1976a80)  sched_switch(c1976a80,0,1) at sched_switch+0x14b
  100032 (0xc1976900)  fork_trampoline() at fork_trampoline
  100033 (0xc1976780)  sched_switch(c1976780,0,1) at sched_switch+0x14b
  100034 (0xc1976600)  fork_trampoline() at fork_trampoline
  100035 (0xc1976480)  sched_switch(c1976480,0,1) at sched_switch+0x14b
  100036 (0xc19cad80)  sched_switch(c19cad80,0,1) at sched_switch+0x14b
  100037 (0xc19cac00)  sched_switch(c19cac00,0,1) at sched_switch+0x14b
  100017 (0xc1972900)  sched_switch(c1972900,0,1) at sched_switch+0x14b
  100018 (0xc1972780)  sched_switch(c1972780,0,1) at sched_switch+0x14b
  100019 (0xc1972600)  fork_trampoline() at fork_trampoline
  100020 (0xc1972480)  sched_switch(c1972480,0,1) at sched_switch+0x14b
  100021 (0xc1972300)  fork_trampoline() at fork_trampoline
  100022 (0xc1972180)  fork_trampoline() at fork_trampoline
  100023 (0xc19b4780)  fork_trampoline() at fork_trampoline
  100024 (0xc19b4600)  fork_trampoline() at fork_trampoline
  100025 (0xc19b4480)  fork_trampoline() at fork_trampoline
  100026 (0xc19b4300)  sched_switch(c19b4300,0,1) at sched_switch+0x14b
  100008 (0xc1970300)  fork_trampoline() at fork_trampoline
  100009 (0xc1970180)  sched_switch(c1970180,0,1) at sched_switch+0x14b
  100010 (0xc1970000)  sched_switch(c1970000,0,1) at sched_switch+0x14b
  100011 (0xc1976300)  fork_trampoline() at fork_trampoline
  100012 (0xc1976180)  fork_trampoline() at fork_trampoline
  100013 (0xc1976000)  fork_trampoline() at fork_trampoline
  100014 (0xc1972d80)  fork_trampoline() at fork_trampoline
  100015 (0xc1972c00)  fork_trampoline() at fork_trampoline
  100016 (0xc1972a80)  fork_trampoline() at fork_trampoline
  100000 (0xc1972000)  fork_trampoline() at fork_trampoline
  100001 (0xc1970d80)  fork_trampoline() at fork_trampoline
  100002 (0xc1970c00)  fork_trampoline() at fork_trampoline
  100003 (0xc1970a80)  fork_trampoline() at fork_trampoline
  100004 (0xc1970900)  sched_switch(c1970900,0,1) at sched_switch+0x14b
  100005 (0xc1970780)  kdb_enter(c088cf57) at kdb_enter+0x2b
  100006 (0xc1970600)  fork_trampoline() at fork_trampoline
  100007 (0xc1970480)  sched_switch(c1970480,0,1) at sched_switch+0x14b
       0 (0xc092f120)  sched_switch(c092f120,0,1) at sched_switch+0x14b
db> call boot
All buffers synced.
Uptime: 1m0s
kernel trap 12 with interrupts disabled


Fatal trap 12: page fault while in kernel mode
fault virtual address	= 0x8
fault code		= supervisor write, page not present
instruction pointer	= 0x20:0xc065bb96
stack pointer	        = 0x28:0xd448083c
frame pointer	        = 0x28:0xd4480848
code segment		= base 0x0, limit 0xfffff, type 0x1b
			= DPL 0, pres 1, def32 1, gran 1
processor eflags	= resume, IOPL = 0
current process		= 11 (idle)
trap number		= 12
panic: page fault
KDB: stack backtrace:
kdb_backtrace(100,c1970780,28,d44807fc,c) at kdb_backtrace+0x29
panic(c0842351,c08902f9,0,fffff,c09b) at panic+0xa8
trap_fatal(d44807fc,8) at trap_fatal+0x2a2
trap(8,28,28,3e8,c1970780) at trap+0xf6
calltrap() at calltrap+0x5
--- trap 0xc, eip = 0xc065bb96, esp = 0xd448083c, ebp = 0xd4480848 ---
sleepq_add(c1b999cc,c1b999a8,c084c5b7,1,0) at sleepq_add+0x66
cv_timedwait(c1b999cc,c1b999a8,fa0,c196ac00,c1b99960) at cv_timedwait+0x108
_sema_timedwait(c1b999a8,fa0,0,0) at _sema_timedwait+0x52
ata_queue_request(c1b99960,0,e7,c1b7e480,c1958280) at ata_queue_request+0x2a2
ata_controlcmd(c1b7e480,e7,0,0,0,0) at ata_controlcmd+0x78
ad_shutdown(c1b7e480) at ad_shutdown+0x2c
device_shutdown(c1b7e480) at device_shutdown+0x42
bus_generic_shutdown(c1a66b00) at bus_generic_shutdown+0x16
device_shutdown(c1a66b00) at device_shutdown+0x42
bus_generic_shutdown(c19bec80) at bus_generic_shutdown+0x16
device_shutdown(c19bec80) at device_shutdown+0x42
bus_generic_shutdown(c1a66080) at bus_generic_shutdown+0x16
device_shutdown(c1a66080) at device_shutdown+0x42
bus_generic_shutdown(c1a66100) at bus_generic_shutdown+0x16
device_shutdown(c1a66100) at device_shutdown+0x42
bus_generic_shutdown(c1a66280) at bus_generic_shutdown+0x16
device_shutdown(c1a66280) at device_shutdown+0x42
bus_generic_shutdown(c196e680) at bus_generic_shutdown+0x16
device_shutdown(c196e680) at device_shutdown+0x42
bus_generic_shutdown(c19be000) at bus_generic_shutdown+0x16
device_shutdown(c19be000,d4480a08,c0634ced,c1966500,2) at device_shutdown+0x42
root_bus_module_handler(c1966500,2,0) at root_bus_module_handler+0xa7
module_shutdown(0,1) at module_shutdown+0x31
boot(1,0,2000003e,c0841ffb,d4480b4c,c06584a9,20,0,2,c089e860) at boot+0x4b2
db_fncall(3f8,0,ffffffff,d4480acc,0) at db_fncall+0xff
db_command(c09181c4,c089e860,c08958e4,c0895900,c0841ff7) at db_command+0x264
db_command_loop(0,0,d4480b84,d4480b70,d4480bb8) at db_command_loop+0x5c
db_trap(3,0,c1970780,3,d4480c04) at db_trap+0xdd
kdb_trap(3,0,d4480c0c) at kdb_trap+0x6b
trap(8,28,28,79,c1af4400) at trap+0x498
calltrap() at calltrap+0x5
--- trap 0x3, eip = 0xc06563ef, esp = 0xd4480c4c, ebp = 0xd4480c4c ---
kdb_enter(c088cf57) at kdb_enter+0x2b
siointr1(c1af4400) at siointr1+0xce
siointr(c1af4400) at siointr+0x38
intr_execute_handlers(c19a1090,d4480cb8,4,d4480cfc,c07ff6d3) at
intr_execute_handlers+0x85
lapic_handle_intr(34) at lapic_handle_intr+0x2e
Xapic_isr1() at Xapic_isr1+0x33
--- interrupt, eip = 0xc0806ba9, esp = 0xd4480cfc, ebp = 0xd4480cfc ---
cpu_idle_default(d4480d10,c0628949,c196fa3c,d4480d24,c06286f8) at
cpu_idle_default+0x5
cpu_idle(c196fa3c,d4480d24,c06286f8,0,d4480d38) at cpu_idle+0x1f
idle_proc(0,d4480d38) at idle_proc+0x11
fork_exit(c0628938,0,d4480d38) at fork_exit+0x70
fork_trampoline() at fork_trampoline+0x8
--- trap 0x1, eip = 0, esp = 0xd4480d6c, ebp = 0 ---
Uptime: 1m0s
Cannot dump. No dump device defined.
Automatic reboot in 15 seconds - press a key on the console to abort
--> Press a key on the console to reboot,
--> or switch off the system now.
Rebooting...

freebsd stable - Dec 2005 - cdboot troubles; 6.0 kernel hanging

cdboot troubles; 6.0 kernel hanging

cdboot troubles; 6.0 kernel hanging