Hi,
I'm running 6.0-STABLE, and I'm encountering some difficulties with
USB devices not appearing in /dev. When I plug in a USB Bluetooth
dongle, the console responds with:
ubt0: SiW SiW, rev 1.10/15.00, addr 2
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3;
wMaxPacketSize=49; nframes=6, buffer size=294
However, if I look in /dev, I only see the generic usb[0-3] devices.
When I used to run 5.4-STABLE, the device entries did appear in /dev.
I have a similar problem with Palm devices and ucom0 not appearing.
What am I missing?
--
Jonathan Chen <jonc@chen.org.nz>
----------------------------------------------------------------------
Opportunities are seldom labeled
On Sat, 03 Dec 2005 12:59:14 +0100, Jonathan Chen <jonc@chen.org.nz> wrote:> Hi, > > I'm running 6.0-STABLE, and I'm encountering some difficulties with > USB devices not appearing in /dev. When I plug in a USB Bluetooth > dongle, the console responds with: > > ubt0: SiW SiW, rev 1.10/15.00, addr 2 > ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2 > ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; > wMaxPacketSize=49; nframes=6, buffer size=294 > > However, if I look in /dev, I only see the generic usb[0-3] devices. > When I used to run 5.4-STABLE, the device entries did appear in /dev. > I have a similar problem with Palm devices and ucom0 not appearing. > > What am I missing?For ubt* this is normal behaviour. Ubt0 is a netgraph 'device'. Do 'ngctl list' as root and you will see it. For more info use the freebsd-bluetooth@freebsd.org list. I don't have experience with ucom*. Ronald. -- Ronald Klop Amsterdam, The Netherlands
On Sun, Dec 04, 2005 at 12:59:14AM +1300, Jonathan Chen wrote:> However, if I look in /dev, I only see the generic usb[0-3] devices. > When I used to run 5.4-STABLE, the device entries did appear in /dev. > I have a similar problem with Palm devices and ucom0 not appearing.In many cases, you need press "Sync" button on cable to make ucom appear.