freebsd stable - Nov 2005 - Current DRM for 6-STABLE

I've put a patch at
http://people.freebsd.org/~anholt/dri/drm-sys-stable-20051128.diff for a
merge of the DRM in -current to 6-STABLE.  I don't intend to merge it
soon, but it may be of use to people who are enjoying life on 6-STABLE
otherwise, and expand the testing before I do commit.  Commit message
from -current:

Update DRM to CVS snapshot as of 2005-11-28.  Notable changes:
- S3 Savage driver ported.
- Added support for ATI_fragment_shader registers for r200.
- Improved r300 support, needed for latest r300 DRI driver.
- (possibly) r300 PCIE support, needs X.Org server from CVS.
- Added support for PCI Matrox cards.
- Software fallbacks fixed for Rage 128, which used to render badly or hang.
- Some issues reported by WITNESS are fixed.
- i915 module Makefile added, as the driver may now be working, but is
untested.- Added scripts for copying and preprocessing DRM CVS for inclusion in
the
  kernel.  Thanks to Daniel Stone for getting me started on that.

As far as i915 goes, apparently people have had it successfully attach
to the drmsub device, which I never managed to when I had an
i915-supported device.  After that there was an AGP issue that I hope I
fixed, so it needs testing now, and may Just Work.

-- 
Eric Anholt                                     eta@lclark.edu
http://people.freebsd.org/~anholt/              anholt@FreeBSD.org
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: This is a digitally signed message part
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20051128/f2995f54/attachment.bin

On 11/29/05, Eric Anholt <eta@lclark.edu> wrote:
[snip]

   It detected the X300 on my Dell Latitude D610:

-- cut here --
   drm0: <ATI Radeon X300> port 0xde00-0xdeff mem
0xd0000000-0xd7ffffff,0xdfdf0000-
0xdfdfffff irq 16 at device 0.0 on pci1
info: [drm] Initialized radeon 1.19.0 20050911
-- and here --

   I'm building xorg-server-snap right now, to see if it knows how to
cope with it. Will report later. One more issue: I had to remove the
savage module from the DRM Makefile so that it builds.

--
If it's there, and you can see it, it's real.
If it's not there, and you can see it, it's virtual.
If it's there, and you can't see it, it's transparent.
If it's not there, and you can't see it, you erased it.

hi,
yesterday i updated one of my dev boxes from 5.3 to 6.0. this box has
two serial ports. i use "cu -l cuadX -s 38400" to connect some
external
"devices". 

this works perfectly fine with cuad1 but not with cuad0. on cuad0 i only
get "connected" from cu but then the line is not usable (no echo, no
input seems to reach the other end). on 5.3 both serial ports worked
perfectly fine this way.

anyone any idea what happend? is there some special handling for cuad0?

btw: the same happens on my laptop (running an older -current) when
using cuaU0 ...

thx
regards,
seb