hello, I installed FreeBSD-6 RELEASE on a Intel based server, updated world to this mornings -STABLE. The machine has a Intel ICH6 SATA controller in it and 2 drives: === dmesg atapci0: <Intel ICH6 SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3090-0x309f at device 31.2 on pci0 atapci0: failed to enable memory mapping! ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 ad0: 157066MB <HDS722516VLSA80 V34OA6MA> at ata0-master SATA150 ad1: 157066MB <HDS722516VLSA80 V34OA6MA> at ata0-slave SATA150 == The problem is I'm getting read timeouts all over: ad1: TIMEOUT - READ_DMA retrying (1 retry left) LBA=191 ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=10055263 ad1: TIMEOUT - READ_DMA retrying (1 retry left) LBA=12095 ad1: TIMEOUT - READ_DMA retrying (1 retry left) LBA=764891 ad0: TIMEOUT - READ_DMA48 retrying (1 retry left) LBA=282913823 ad0: TIMEOUT - READ_DMA48 retrying (0 retries left) LBA=282913823 ad0: FAILURE - READ_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=282913823 g_vfs_done():ad0s1f[READ(offset=138958848000, length=10752)]error = 5 vnode_pager_getpages: I/O read error ad0: TIMEOUT - WRITE_DMA retrying (1 retry left) LBA=11521823 ad0: TIMEOUT - WRITE_DMA48 retrying (1 retry left) LBA=283051135 ad0: TIMEOUT - WRITE_DMA48 retrying (0 retries left) LBA=283051135 ad0: FAILURE - WRITE_DMA48 status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=283051135 g_vfs_done():ad0s1f[WRITE(offset=139029151744, length=4096)]error = 5 ad0: TIMEOUT - READ_DMA retrying (1 retry left) LBA=12703 I've tried booting without ACPI that didn't help, other than that I'm out of ideas, has anyone had success with this card? I searched through the archives and on google and I've come across many posts concluding this is a crap card, unfortunately I have extremely limited options for changing cards as the machine is hosted at a ISP and its their hardware. Any help would be appreciated.