Hi, I try to use pptp (pptpclient) and ppp connection to my ISP with FreeBSD 6-STABLE. If I compile pptp from ports after installation it works in user land and consume 50-60% from my CPU time (for 200 KB/sec). Before 6-STABLE with 6-TESTx and RCx my pptp, compiled to use kernel level ppp works great, but with 6-STABLE after 5 to 10 minutes I have page fault and reboot. pptpclient from ports by default compiles to work with user land ppp but with simple changes in Makefile I compile it to work with kernel level ppp. Would you help me how can I use pptp with kernel level ppp and FreeBSD 6-STABLE?
I've stuck a Promise TX4300 controller in to replace the marvell onboard SATA that I can't boot off on a Supermicro server. If I set 2 discs up as Raid 0 or Raid 1 it's fine, But 4 discs as Raid 0+1 is detected, installs without any problems, but hangs at the boot loader with elf32_loadimage: read failed. I'm guesssing the boot loader thinks it's a mirror, not a stripe and fails to read past the first stripe on the disk? Anyone come across this or have an idea?
On Tue, Nov 15, 2005 at 09:38:16AM +0200, Anatoli Marinov wrote: A> I try to use pptp (pptpclient) and ppp connection to my ISP with FreeBSD A> 6-STABLE. A> If I compile pptp from ports after installation it works in user land and A> consume 50-60% from my CPU time (for 200 KB/sec). A> Before 6-STABLE with 6-TESTx and RCx my pptp, compiled to use kernel level ppp A> works great, but with 6-STABLE after 5 to 10 minutes I have page fault and A> reboot. A> pptpclient from ports by default compiles to work with user land ppp but with A> simple changes in Makefile I compile it to work with kernel level ppp. A> A> Would you help me how can I use pptp with kernel level ppp and FreeBSD A> 6-STABLE? Use ports/net/mpd. It is a userland daemon, that configures in-kernel PPP (including PPTP). -- Totus tuus, Glebius. GLEBIUS-RIPN GLEB-RIPE