Mitch (Bitblock)
2005-Nov-12 00:02 UTC
(i386/88610) Problem with booting FreeBSD 6.0 bootonly.iso - 5.4 works fine
[This email is either empty or too large to be displayed at this time]
Mitch (Bitblock)
2005-Nov-12 00:12 UTC
(i386/88610) Problem with booting FreeBSD 6.0 bootonly.iso - 5.4 works fine
SORRY FOR THE REPOST - ORIGINAL WAS HTML - STOPPED BY MODERATOR - THANKS Something changed between versions ? at first I thought the problem had something to with the lan card ? or maybe compatibility between the lan card and the host system ? but now I have a second lan card that produces the same problem ? but ONLY with FreeBSD 6.0 release. I?m hoping stable is the right list? If it?s supposed to be current, sorry ? first time posting a problem like this The first 4 lans are on the motherboard. The Fault 12 occurs just after starting to detect the 6th lan interface Here?s the 5th lan (first on this PCI card re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000 pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xee013000-0xee0130ff irq 11 at device 8.0 on pci4 pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range miibus4: <MII bus> on rl4 rlphy4: <RealTek internal media interface> on miibus4 rlphy4:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl4: bpf attached rl4: Ethernet address: 00:30:18:49:3f:44 rl4: [MPSAFE] And here?s the start of the 6th re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100 pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem 0xee010000-0xee0100ff irq 7 at device 9.0 on pci4 pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range Fatal trap 12: page fault while in kernel mode fault virtual address??????? = 0x10 fault code????????????????????? = supervisor read, page not present instruction pointer????????? = 0x20:0xc069c394 stack pointer???? ??????? = 0x28:0xc1020938 frame pointer???? ??????? = 0x28:0xc1020938 code segment??????????????? = base 0x0, limit 0xfffff, type 0x1b ??????????? ??????????????????????? = DPL 0, pres 1, def32 1, gran 1 processor eflags??????????? = interrupt enabled, resume, IOPL = 0 current process????????????? = 0 (swapper) trap number?????????????????? = 12 panic: page fault Uptime: 1s The problem occurs in the same place with a different type of 4 port lan card, however the problem does not occur in a system with only one LAN on the motherboard (with version 6.0 or 5.4) So below I have attached boot messages from a 6.0 bootonly.iso (I tried to capture messages from a bootonly 5.4, but using ?boot ?h? or ?boot ?h ?v? stops after loading acpi ? presumably when it starts using the serial port ? and yet in 6.0 ? this is fine ;-) Any help greatly appreciated ? I?ll do whatever testing and provide whatever other information is required ? thanks in advance! m/ FreeBSD 6.0 release bootonly console dump: SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=03 base=000000001eff3000 len=000000000000d000 SMAP type=04 base=000000001eff0000 len=0000000000003000 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=01 base=0000000000100000 len=000000001eef0000 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 ??????????? The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Fri Nov? 4 01:40:13 UTC 2005 ??? sullrich@builder.livebsd.com:/usr/obj/usr/src/sys/pfSense.6 Preloaded elf kernel "/boot/kernel/kernel" at 0xc0b0a000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0b0a158. Calibrating clock(s) ... i8254 clock: 1193212 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1002277897 Hz CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU) ? Origin = "CentaurHauls"? Id = 0x698? Stepping = 8 ? Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE>real memory? = 520028160 (495 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000001e6fffff, 497909760 bytes (121560 pages) avail memory = 499310592 (476 MB) bios32: Found BIOS32 Service Directory header at 0xc00faf30 bios32: Entry = 0xfb3b0 (c00fb3b0)? Rev = 0? Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb400 pnpbios: Found PnP BIOS data at 0xc00fbec0 pnpbios: Entry = f0000:bef0? Rev = 1.0 Other BIOS signatures found: crypto: <crypto core> ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> wlan: <802.11 MAC ACL support> wlan: mac acl policy registered wlan: <802.11 Link Layer> mem: <memory> nfslock: pseudo-device null: <null device, zero device> io: <I/O> random: <entropy source, Hardware, VIA Nehemiah> ath_hal: 0.9.16.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413, DFS) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <CLE266 AWRDACPI> on motherboard acpi0: [MPSAFE] pci_open(1):????? mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a):???? mode1res=0x80000000 (0x80000000) pci_cfgcheck:??? device 0 [class=060000] [hdr=00] is there (id=31231106) pcibios: BIOS version 2.10 Found $PIR table, 12 entries at 0xc00fdea0 PCI-Only Interrupts: 5 7 10 11 Location? Bus Device Pin? Link? IRQs slot 1????? 0??? 8??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 1????? 0??? 8??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 1????? 0??? 8??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 1????? 0??? 8??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9??? A?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9??? B?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9??? C?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9??? D?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10??? A?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10??? B?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10??? C?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10? ??D?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? A?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? B?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? C?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? D?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? A?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? B?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? C?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? D?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14?? ?A?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14??? B?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14??? C?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14??? D?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? A?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? B?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? C?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? D?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 17??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 17??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1? ??D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func 0 acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link0: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0?? 10?? N???? 0? 3 4 6 7 10 11 12 pci_link0: Links after initial validation: Index? IRQ? Rtd? Ref? IRQs ??? 0?? 10?? N???? 0? 3 4 6 7 10 11 12 pci_link0: Links after disable: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0?? 11?? N???? 0? 3 4 6 7 10 11 12 pci_link1: Links after initial validation: Index? IRQ? Rtd? Ref? IRQs ??? 0?? 11?? N???? 0? 3 4 6 7 10 11 12 pci_link1: Links after disable: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0 pci_link2: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0??? 7?? N???? 0? 3 4 6 7 10 11 12 pci_link2: Links after initial validation: Index? IRQ? Rtd? Ref? IRQs ??? 0??? 7?? N???? 0? 3 4 6 7 10 11 12 pci_link2: Links after disable: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 pci_link3: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0??? 5?? N???? 0? 3 4 6 7 10 11 12 pci_link3: Links after initial validation: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link3: Links after disable: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 ACPI timer: 1/2 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x4010 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1106, dev=0x3123, revid=0x00 ??????????? bus=0, slot=0, func=0 ??????????? class=06-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) ??????????? lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? powerspec 2? supports D0 D3? current D0 ??????????? map[10]: type 3, range 32, base e4000000, size 26, enabled found-> vendor=0x1106, dev=0xb091, revid=0x00 ??????????? bus=0, slot=1, func=0 ??????????? class=06-04-00, hdrtype=0x01, mfdev=0 ??????????? cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords) ??????????? lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=8, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000db00, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee11c000, size? 8, enabled pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=9, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000d000, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee11e000, size? 8, enabled pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0) pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=10, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000d100, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee110000, size? 8, enabled pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0) pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=11, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=5 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000d200, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee111000, size? 8, enabled pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0) pci_link3: Picked IRQ 9 with weight 0 pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD found-> vendor=0x1180, dev=0x0476, revid=0x82 ??????????? bus=0, slot=12, func=0 ??????????? class=06-07-00, hdrtype=0x02, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 1, range 32, base ee112000, size 12, enabled pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA found-> vendor=0x1180, dev=0x0476, revid=0x82 ??????????? bus=0, slot=12, func=1 ??????????? class=06-07-00, hdrtype=0x02, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) ??????????? intpin=b, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 1, range 32, base ee117000, size 12, enabled pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0) pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB found-> vendor=0x12d8, dev=0x8148, revid=0x00 ??????????? bus=0, slot=13, func=0 ??????????? class=06-04-00, hdrtype=0x01, mfdev=0 ??????????? cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x3038, revid=0x80 ??????????? bus=0, slot=16, func=0 ??????????? class=0c-03-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000dc00, size? 5, enabled pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA found-> vendor=0x1106, dev=0x3038, revid=0x80 ??????????? bus=0, slot=16, func=1 ??????????? class=0c-03-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=b, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000dd00, size? 5, enabled pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0) pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB found-> vendor=0x1106, dev=0x3038, revid=0x80 ??????????? bus=0, slot=16, func=2 ??????????? class=0c-03-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=c, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000de00, size? 5, enabled pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0) pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC found-> vendor=0x1106, dev=0x3104, revid=0x82 ??????????? bus=0, slot=16, func=3 ??????????? class=0c-03-20, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=d, irq=5 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 1, range 32, base ee11d000, size? 8, enabled pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0) pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD found-> vendor=0x1106, dev=0x3177, revid=0x00 ??????????? bus=0, slot=17, func=0 ??????????? class=06-01-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? powerspec 2? supports D0 D3? current D0 found-> vendor=0x1106, dev=0x0571, revid=0x06 ??????????? bus=0, slot=17, func=1 ??????????? class=01-01-8a, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=a, irq=255 ??????????? powerspec 2? supports D0 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000df00, size? 4, enabled found-> vendor=0x1106, dev=0x3059, revid=0x50 ??????????? bus=0, slot=17, func=5 ??????????? class=04-01-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=c, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000e000, size? 8, enabled pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0) pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1:?? secondary bus???? 1 pcib1:?? subordinate bus?? 1 pcib1:?? I/O decode??????? 0xf000-0xfff pcib1:?? memory decode???? 0xec000000-0xedffffff pcib1:?? prefetched decode 0xe8000000-0xebffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1106, dev=0x3122, revid=0x03 ??????????? bus=1, slot=0, func=0 ??????????? class=03-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 3, range 32, base e8000000, size 26, enabled pcib1: (null) requested memory range 0xe8000000-0xebffffff: good ??????????? map[14]: type 1, range 32, base ec000000, size 24, enabled pcib1: (null) requested memory range 0xec000000-0xecffffff: good pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA pcib1: slot 0 INTA is routed to irq 10 pci1: <display, VGA> at device 0.0 (no driver attached) rl0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00 rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem 0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:40:48:b1:11:5d rl0: [MPSAFE] rl1: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000 rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: bpf attached rl1: Ethernet address: 00:40:48:b1:11:5c rl1: [MPSAFE] rl2: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100 rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem 0xee110000-0xee1100ff irq 7 at device 10.0 on pci0 miibus2: <MII bus> on rl2 rlphy2: <RealTek internal media interface> on miibus2 rlphy2:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl2: bpf attached rl2: Ethernet address: 00:40:48:b1:11:5b rl2: [MPSAFE] rl3: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200 rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem 0xee111000-0xee1110ff irq 9 at device 11.0 on pci0 miibus3: <MII bus> on rl3 rlphy3: <RealTek internal media interface> on miibus3 rlphy3:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl3: bpf attached rl3: Ethernet address: 00:40:48:b1:11:5a rl3: [MPSAFE] cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at device 12.0 on pci0 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: ? 0x00: 0x04761180 0x02100007 0x06070082 0x00822000 ? 0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000 ? 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc ? 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a ? 0x40: 0x78563412 0x00000001 0x00000000 0x00000000 ? 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 ? 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xb0: 0x00000000 0x00000000 0x00003800 0x00000000 ? 0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 ? 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 ? 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 ? 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at device 12.1 on pci0 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: ? 0x00: 0x04761180 0x02100007 0x06070082 0x00822000 ? 0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000 ? 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc ? 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b ? 0x40: 0x78563412 0x00000001 0x00000000 0x00000000 ? 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 ? 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 ? 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 ? 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 ? 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pcib2: <PCI-PCI bridge> at device 13.0 on pci0 pcib2:?? secondary bus???? 4 pcib2:?? subordinate bus?? 4 pcib2:?? I/O decode??????? 0xc000-0xcfff pcib2:?? memory decode???? 0xee000000-0xee0fffff pcib2:?? prefetched decode 0xfff00000-0xfffff pci4: <PCI bus> on pcib2 pci4: physical bus=4 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=8, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c000, size? 8, enabled pcib2: (null) requested I/O range 0xc000-0xc0ff: in range ??????????? map[14]: type 1, range 32, base ee013000, size? 8, enabled pcib2: (null) requested memory range 0xee013000-0xee0130ff: good pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB:0) pcib0: slot 13 INTA routed to irq 11 via \_SB_.PCI0.LNKB pcib2: slot 8 INTA is routed to irq 11 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=9, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c100, size? 8, enabled pcib2: (null) requested I/O range 0xc100-0xc1ff: in range ??????????? map[14]: type 1, range 32, base ee010000, size? 8, enabled pcib2: (null) requested memory range 0xee010000-0xee0100ff: good pcib0: matched entry for 0.13.INTB (src \_SB_.PCI0.LNKC:0) pcib0: slot 13 INTB routed to irq 7 via \_SB_.PCI0.LNKC pcib2: slot 9 INTA is routed to irq 7 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=10, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=5 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c200, size? 8, enabled pcib2: (null) requested I/O range 0xc200-0xc2ff: in range ??????????? map[14]: type 1, range 32, base ee011000, size? 8, enabled pcib2: (null) requested memory range 0xee011000-0xee0110ff: good pcib0: matched entry for 0.13.INTC (src \_SB_.PCI0.LNKD:0) pcib0: slot 13 INTC routed to irq 9 via \_SB_.PCI0.LNKD pcib2: slot 10 INTA is routed to irq 9 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=11, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c300, size? 8, enabled pcib2: (null) requested I/O range 0xc300-0xc3ff: in range ??????????? map[14]: type 1, range 32, base ee012000, size? 8, enabled pcib2: (null) requested memory range 0xee012000-0xee0120ff: good pcib0: matched entry for 0.13.INTD (src \_SB_.PCI0.LNKA:0) pcib0: slot 13 INTD routed to irq 10 via \_SB_.PCI0.LNKA pcib2: slot 11 INTA is routed to irq 10 rl4: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000 pcib2: re0 requested I/O range 0xc000-0xc0ff: in range pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xee013000-0xee0130ff irq 11 at device 8.0 on pci4 pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range miibus4: <MII bus> on rl4 rlphy4: <RealTek internal media interface> on miibus4 rlphy4:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl4: bpf attached rl4: Ethernet address: 00:30:18:49:3f:44 rl4: [MPSAFE] rl5: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100 pcib2: re0 requested I/O range 0xc100-0xc1ff: in range pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem 0xee010000-0xee0100ff irq 7 at device 9.0 on pci4 pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 00 fault virtual address??????? = 0x10 fault code????????????????????? = supervisor read, page not present instruction pointer????????? = 0x20:0xc07407c0 stack pointer???? ??????? = 0x28:0xc0c209ec frame pointer???? ??????? = 0x28:0xc0c209ec code segment??????????????? = base 0x0, limit 0xfffff, type 0x1b ??????????????????????????????????? = DPL 0, pres 1, def32 1, gran 1 processor eflags??????????? = interrupt enabled, resume, IOPL = 0 current process????????????? = 0 (swapper) trap number?????????????????? = 12 panic: page fault cpuid = 0 Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting... SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=03 base=000000001eff3000 len=000000000000d000 SMAP type=04 base=000000001eff0000 len=0000000000003000 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=01 base=0000000000100000 len=000000001eef0000 Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 ??????????? The Regents of the University of California. All rights reserved. FreeBSD 6.0-RELEASE #0: Thu Nov? 3 09:36:13 UTC 2005 ??? root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ec1000. Preloaded mfs_root "/boot/mfsroot" at 0xc0ec1170. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ec11b4. Calibrating clock(s) ... i8254 clock: 1193206 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 1002279760 Hz CPU: VIA C3 Nehemiah+RNG+ACE (1002.28-MHz 686-class CPU) ? Origin = "CentaurHauls"? Id = 0x698? Stepping = 8 ? Features=0x381b83f<FPU,VME,DE,PSE,TSC,MSR,SEP,MTRR,PGE,CMOV,PAT,MMX,FXSR,SSE>real memory? = 520028160 (495 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000001025000 - 0x000000001e6fffff, 493727744 bytes (120539 pages) avail memory = 495345664 (472 MB) bios32: Found BIOS32 Service Directory header at 0xc00faf30 bios32: Entry = 0xfb3b0 (c00fb3b0)? Rev = 0? Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xb400 pnpbios: Found PnP BIOS data at 0xc00fbec0 pnpbios: Entry = f0000:bef0? Rev = 1.0 Other BIOS signatures found: wlan: <802.11 Link Layer> random: <entropy source, Hardware, VIA Nehemiah> nfslock: pseudo-device io: <I/O> mem: <memory> null: <null device, zero device> npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <CLE266 AWRDACPI> on motherboard acpi0: [MPSAFE] pci_open(1):????? mode 1 addr port (0x0cf8) is 0x80000060 pci_open(1a):???? mode1res=0x80000000 (0x80000000) pci_cfgcheck:??? device 0 [class=060000] [hdr=00] is there (id=31231106) pcibios: BIOS version 2.10 Found $PIR table, 12 entries at 0xc00fdea0 PCI-Only Interrupts: 5 7 10 11 Location? Bus Device Pin? Link? IRQs slot 1????? 0??? 8??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 1????? 0??? 8??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 1????? 0??? 8??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 1????? 0??? 8??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9??? A?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9??? B?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9? ??C?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 2????? 0??? 9??? D?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10??? A?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10??? B?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10??? C?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 3????? 0?? 10??? D?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? A?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? B?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? C?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 4????? 0?? 11??? D?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 5????? 0?? 12?? ?D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? A?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? B?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? C?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 6????? 0?? 13??? D?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14??? A?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14??? B?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14??? C?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 7????? 0?? 14? ??D?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? A?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? B?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? C?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 8????? 0?? 15??? D?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 slot 9????? 0?? 16??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 17??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 17??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1?? ?C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0??? 1??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? A?? 0x01? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? B?? 0x02? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? C?? 0x03? 3 4 5 6 7 9 10 11 12 14 15 embedded??? 0?? 16??? D?? 0x05? 3 4 5 6 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 17 func 1 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func 0 acpi0: Power Button (fixed) pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0 pci_link0: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0?? 10?? N???? 0? 3 4 6 7 10 11 12 pci_link0: Links after initial validation: Index? IRQ? Rtd? Ref? IRQs ??? 0?? 10?? N???? 0? 3 4 6 7 10 11 12 pci_link0: Links after disable: Index? IRQ ?Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0 pci_link1: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0?? 11?? N???? 0? 3 4 6 7 10 11 12 pci_link1: Links after initial validation: Index ?IRQ? Rtd? Ref? IRQs ??? 0?? 11?? N???? 0? 3 4 6 7 10 11 12 pci_link1: Links after disable: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link2: <ACPI PCI Link LNKC> irq 7 on acpi0 pci_link2: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0??? 7?? N???? 0? 3 4 6 7 10 11 12 pci_link2: Links after initial validation: Index? IRQ? Rtd? Ref? IRQs ??? 0??? 7?? N???? 0? 3 4 6 7 10 11 12 pci_link2: Links after disable: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link3: <ACPI PCI Link LNKD> irq 5 on acpi0 pci_link3: Links after initial probe: Index? IRQ? Rtd? Ref? IRQs ??? 0??? 5?? N???? 0? 3 4 6 7 10 11 12 pci_link3: Links after initial validation: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 pci_link3: Links after disable: Index? IRQ? Rtd? Ref? IRQs ??? 0? 255?? N???? 0? 3 4 6 7 10 11 12 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_throttle0: P_CNT from P_BLK 0x4010 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x1106, dev=0x3123, revid=0x00 ??????????? bus=0, slot=0, func=0 ??????????? class=06-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords) ??????????? lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? powerspec 2? supports D0 D3? current D0 ??????????? map[10]: type 3, range 32, base e4000000, size 26, enabled found-> vendor=0x1106, dev=0xb091, revid=0x00 ??????????? bus=0, slot=1, func=0 ??????????? class=06-04-00, hdrtype=0x01, mfdev=0 ??????????? cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords) ??????????? lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=8, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000db00, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee11c000, size? 8, enabled pcib0: matched entry for 0.8.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 8 INTA routed to irq 10 via \_SB_.PCI0.LNKA found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=9, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000d000, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee11e000, size? 8, enabled pcib0: matched entry for 0.9.INTA (src \_SB_.PCI0.LNKB:0) pcib0: slot 9 INTA routed to irq 11 via \_SB_.PCI0.LNKB found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=10, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000d100, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee110000, size? 8, enabled pcib0: matched entry for 0.10.INTA (src \_SB_.PCI0.LNKC:0) pcib0: slot 10 INTA routed to irq 7 via \_SB_.PCI0.LNKC found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=0, slot=11, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=5 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000d200, size? 8, enabled ??????????? map[14]: type 1, range 32, base ee111000, size? 8, enabled pcib0: matched entry for 0.11.INTA (src \_SB_.PCI0.LNKD:0) pci_link3: Picked IRQ 9 with weight 0 pcib0: slot 11 INTA routed to irq 9 via \_SB_.PCI0.LNKD found-> vendor=0x1180, dev=0x0476, revid=0x82 ??????????? bus=0, slot=12, func=0 ??????????? class=06-07-00, hdrtype=0x02, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 1, range 32, base ee112000, size 12, enabled pcib0: matched entry for 0.12.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 12 INTA routed to irq 10 via \_SB_.PCI0.LNKA found-> vendor=0x1180, dev=0x0476, revid=0x82 ??????????? bus=0, slot=12, func=1 ??????????? class=06-07-00, hdrtype=0x02, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns) ??????????? intpin=b, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 1, range 32, base ee117000, size 12, enabled pcib0: matched entry for 0.12.INTB (src \_SB_.PCI0.LNKB:0) pcib0: slot 12 INTB routed to irq 11 via \_SB_.PCI0.LNKB found-> vendor=0x12d8, dev=0x8148, revid=0x00 ??????????? bus=0, slot=13, func=0 ??????????? class=06-04-00, hdrtype=0x01, mfdev=0 ??????????? cmdreg=0x0107, statreg=0x02b0, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x06 (1500 ns), maxlat=0x00 (0 ns) found-> vendor=0x1106, dev=0x3038, revid=0x80 ??????????? bus=0, slot=16, func=0 ??????????? class=0c-03-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000dc00, size? 5, enabled pcib0: matched entry for 0.16.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 16 INTA routed to irq 10 via \_SB_.PCI0.LNKA found-> vendor=0x1106, dev=0x3038, revid=0x80 ??????????? bus=0, slot=16, func=1 ??????????? class=0c-03-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=b, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000dd00, size? 5, enabled pcib0: matched entry for 0.16.INTB (src \_SB_.PCI0.LNKB:0) pcib0: slot 16 INTB routed to irq 11 via \_SB_.PCI0.LNKB found-> vendor=0x1106, dev=0x3038, revid=0x80 ??????????? bus=0, slot=16, func=2 ??????????? class=0c-03-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=c, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000de00, size? 5, enabled pcib0: matched entry for 0.16.INTC (src \_SB_.PCI0.LNKC:0) pcib0: slot 16 INTC routed to irq 7 via \_SB_.PCI0.LNKC found-> vendor=0x1106, dev=0x3104, revid=0x82 ??????????? bus=0, slot=16, func=3 ??????????? class=0c-03-20, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=d, irq=5 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 1, range 32, base ee11d000, size? 8, enabled pcib0: matched entry for 0.16.INTD (src \_SB_.PCI0.LNKD:0) pcib0: slot 16 INTD routed to irq 9 via \_SB_.PCI0.LNKD found-> vendor=0x1106, dev=0x3177, revid=0x00 ??????????? bus=0, slot=17, func=0 ??????????? class=06-01-00, hdrtype=0x00, mfdev=1 ??????????? cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? powerspec 2? supports D0 D3? current D0 found-> vendor=0x1106, dev=0x0571, revid=0x06 ??????????? bus=0, slot=17, func=1 ??????????? class=01-01-8a, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=a, irq=255 ??????????? powerspec 2? supports D0 D3? current D0 ??????????? map[20]: type 4, range 32, base 0000df00, size? 4, enabled found-> vendor=0x1106, dev=0x3059, revid=0x50 ??????????? bus=0, slot=17, func=5 ??????????? class=04-01-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords) ??????????? lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) ??????????? intpin=c, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000e000, size? 8, enabled pcib0: matched entry for 0.17.INTC (src \_SB_.PCI0.LNKC:0) pcib0: slot 17 INTC routed to irq 7 via \_SB_.PCI0.LNKC agp0: <VIA 862x (CLE266) host to PCI bridge> mem 0xe4000000-0xe7ffffff at device 0.0 on pci0 agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe4000000 agp0: allocating GATT for aperture of size 256M pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1:?? secondary bus???? 1 pcib1:?? subordinate bus?? 1 pcib1:?? I/O decode??????? 0xf000-0xfff pcib1:?? memory decode???? 0xec000000-0xedffffff pcib1:?? prefetched decode 0xe8000000-0xebffffff pci1: <PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x1106, dev=0x3122, revid=0x03 ??????????? bus=1, slot=0, func=0 ??????????? class=03-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 3, range 32, base e8000000, size 26, enabled pcib1: (null) requested memory range 0xe8000000-0xebffffff: good ??????????? map[14]: type 1, range 32, base ec000000, size 24, enabled pcib1: (null) requested memory range 0xec000000-0xecffffff: good pcib0: matched entry for 0.1.INTA (src \_SB_.PCI0.LNKA:0) pcib0: slot 1 INTA routed to irq 10 via \_SB_.PCI0.LNKA pcib1: slot 0 INTA is routed to irq 10 pci1: <display, VGA> at device 0.0 (no driver attached) re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xdb00 rl0: <RealTek 8139 10/100BaseTX> port 0xdb00-0xdbff mem 0xee11c000-0xee11c0ff irq 10 at device 8.0 on pci0 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: bpf attached rl0: Ethernet address: 00:40:48:b1:11:5d rl0: [MPSAFE] re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000 rl1: <RealTek 8139 10/100BaseTX> port 0xd000-0xd0ff mem 0xee11e000-0xee11e0ff irq 11 at device 9.0 on pci0 miibus1: <MII bus> on rl1 rlphy1: <RealTek internal media interface> on miibus1 rlphy1:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl1: bpf attached rl1: Ethernet address: 00:40:48:b1:11:5c rl1: [MPSAFE] re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd100 rl2: <RealTek 8139 10/100BaseTX> port 0xd100-0xd1ff mem 0xee110000-0xee1100ff irq 7 at device 10.0 on pci0 miibus2: <MII bus> on rl2 rlphy2: <RealTek internal media interface> on miibus2 rlphy2:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl2: bpf attached rl2: Ethernet address: 00:40:48:b1:11:5b rl2: [MPSAFE] re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd200 rl3: <RealTek 8139 10/100BaseTX> port 0xd200-0xd2ff mem 0xee111000-0xee1110ff irq 9 at device 11.0 on pci0 miibus3: <MII bus> on rl3 rlphy3: <RealTek internal media interface> on miibus3 rlphy3:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl3: bpf attached rl3: Ethernet address: 00:40:48:b1:11:5a rl3: [MPSAFE] cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xee112000-0xee112fff irq 10 at device 12.0 on pci0 cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee112000 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb0: PCI Configuration space: ? 0x00: 0x04761180 0x02100007 0x06070082 0x00822000 ? 0x10: 0xee112000 0x020000dc 0x20020200 0xfffff000 ? 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc ? 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700010a ? 0x40: 0x78563412 0x00000001 0x00000000 0x00000000 ? 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 ? 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xb0: 0x00000000 0x00000000 0x00003800 0x00000000 ? 0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 ? 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 ? 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 ? 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: <RF5C476 PCI-CardBus Bridge> mem 0xee117000-0xee117fff irq 11 at device 12.1 on pci0 cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xee117000 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] cbb1: PCI Configuration space: ? 0x00: 0x04761180 0x02100007 0x06070082 0x00822000 ? 0x10: 0xee117000 0x020000dc 0x20030300 0xfffff000 ? 0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc ? 0x30: 0x00000000 0xfffffffc 0x00000000 0x0700020b ? 0x40: 0x78563412 0x00000001 0x00000000 0x00000000 ? 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0x80: 0x00a00001 0x00000000 0x04630463 0x00000000 ? 0x90: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xa0: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 ? 0xc0: 0x78563412 0x00000000 0x00000000 0x00000000 ? 0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001 ? 0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000 ? 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pcib2: <PCI-PCI bridge> at device 13.0 on pci0 pcib2:?? secondary bus???? 4 pcib2:?? subordinate bus?? 4 pcib2:?? I/O decode??????? 0xc000-0xcfff pcib2:?? memory decode???? 0xee000000-0xee0fffff pcib2:?? prefetched decode 0xfff00000-0xfffff pci4: <PCI bus> on pcib2 pci4: physical bus=4 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=8, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=11 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c000, size? 8, enabled pcib2: (null) requested I/O range 0xc000-0xc0ff: in range ??????????? map[14]: type 1, range 32, base ee013000, size? 8, enabled pcib2: (null) requested memory range 0xee013000-0xee0130ff: good pcib0: matched entry for 0.13.INTA (src \_SB_.PCI0.LNKB:0) pcib0: slot 13 INTA routed to irq 11 via \_SB_.PCI0.LNKB pcib2: slot 8 INTA is routed to irq 11 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=9, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=7 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c100, size? 8, enabled pcib2: (null) requested I/O range 0xc100-0xc1ff: in range ??????????? map[14]: type 1, range 32, base ee010000, size? 8, enabled pcib2: (null) requested memory range 0xee010000-0xee0100ff: good pcib0: matched entry for 0.13.INTB (src \_SB_.PCI0.LNKC:0) pcib0: slot 13 INTB routed to irq 7 via \_SB_.PCI0.LNKC pcib2: slot 9 INTA is routed to irq 7 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=10, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=5 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c200, size? 8, enabled pcib2: (null) requested I/O range 0xc200-0xc2ff: in range ??????????? map[14]: type 1, range 32, base ee011000, size? 8, enabled pcib2: (null) requested memory range 0xee011000-0xee0110ff: good pcib0: matched entry for 0.13.INTC (src \_SB_.PCI0.LNKD:0) pcib0: slot 13 INTC routed to irq 9 via \_SB_.PCI0.LNKD pcib2: slot 10 INTA is routed to irq 9 found-> vendor=0x10ec, dev=0x8139, revid=0x10 ??????????? bus=4, slot=11, func=0 ??????????? class=02-00-00, hdrtype=0x00, mfdev=0 ??????????? cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) ??????????? lattimer=0x20 (960 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns) ??????????? intpin=a, irq=10 ??????????? powerspec 2? supports D0 D1 D2 D3? current D0 ??????????? map[10]: type 4, range 32, base 0000c300, size? 8, enabled pcib2: (null) requested I/O range 0xc300-0xc3ff: in range ??????????? map[14]: type 1, range 32, base ee012000, size? 8, enabled pcib2: (null) requested memory range 0xee012000-0xee0120ff: good pcib0: matched entry for 0.13.INTD (src \_SB_.PCI0.LNKA:0) pcib0: slot 13 INTD routed to irq 10 via \_SB_.PCI0.LNKA pcib2: slot 11 INTA is routed to irq 10 re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000 pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range rl4: <RealTek 8139 10/100BaseTX> port 0xc000-0xc0ff mem 0xee013000-0xee0130ff irq 11 at device 8.0 on pci4 pcib2: rl4 requested I/O range 0xc000-0xc0ff: in range miibus4: <MII bus> on rl4 rlphy4: <RealTek internal media interface> on miibus4 rlphy4:? 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl4: bpf attached rl4: Ethernet address: 00:30:18:49:3f:44 rl4: [MPSAFE] re0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc100 pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range rl5: <RealTek 8139 10/100BaseTX> port 0xc100-0xc1ff mem 0xee010000-0xee0100ff irq 7 at device 9.0 on pci4 pcib2: rl5 requested I/O range 0xc100-0xc1ff: in range Fatal trap 12: page fault while in kernel mode fault virtual address??????? = 0x10 fault code????????????????????? = supervisor read, page not present instruction pointer????????? = 0x20:0xc069c394 stack pointer???? ??????? = 0x28:0xc1020938 frame pointer???? ??????? = 0x28:0xc1020938 code segment??????????????? = base 0x0, limit 0xfffff, type 0x1b ??????????? ??????????????????????? = DPL 0, pres 1, def32 1, gran 1 processor eflags??????????? = interrupt enabled, resume, IOPL = 0 current process????????????? = 0 (swapper) trap number?????????????????? = 12 panic: page fault Uptime: 1s Automatic reboot in 15 seconds - press a key on the console to abort Rebooting...