christian meutes
2005-Nov-09 06:49 UTC
FreeBSD 6.0 and Intel ICH6 UDMA100 controller on HP DL320-G3
Hello,
i just tried to install FreeBSD-6.0 on a HP DL320 box. It seems that
FreeBSD cant mount the S-ATA Harddrives attached to the onboard Intel ICH6
UDMA100 controller any more, with FreeBSD-5.4 it works.
Following the dmesg output (boot -v):
---
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005
root@x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ec1000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0ec119c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ec11e0.
MP Configuration Table version 1.4 found at 0xc00f269a
Table 'FACP' at 0x3fff32f4
Table 'SPCR' at 0x3fff3100
Table 'MCFG' at 0x3fff3180
Table 'APIC' at 0x3fff31c0
MADT: Found table at 0x3fff31c0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 4 ACPI ID 4: disabled
MADT: Found CPU APIC ID 6 ACPI ID 6: disabled
MADT: Found CPU APIC ID 1 ACPI ID 1: enabled
MADT: Found CPU APIC ID 3 ACPI ID 3: disabled
MADT: Found CPU APIC ID 5 ACPI ID 5: disabled
MADT: Found CPU APIC ID 7 ACPI ID 7: disabled
ACPI APIC Table: <HP 00000083>
Calibrating clock(s) ... i8254 clock: 1193215 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 3391521599 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3391.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>>
AMD Features=0x20000000<LM>
Hyperthreading: 2 logical CPUs
real memory = 1073688576 (1023 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000003edbafff, 1037656064 bytes (253334 pages)
avail memory = 1037602816 (989 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x96
pnpbios: Found PnP BIOS data at 0xc00f4f50
pnpbios: Entry = f0000:a748 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Found IO APIC ID 10, Interrupt 24 at 0xfec80000
ioapic1: intpin 0 -> PCI IRQ 24 (level, low)
ioapic1: intpin 1 -> PCI IRQ 25 (level, low)
ioapic1: intpin 2 -> PCI IRQ 26 (level, low)
ioapic1: intpin 3 -> PCI IRQ 27 (level, low)
ioapic1: intpin 4 -> PCI IRQ 28 (level, low)
ioapic1: intpin 5 -> PCI IRQ 29 (level, low)
ioapic1: intpin 6 -> PCI IRQ 30 (level, low)
ioapic1: intpin 7 -> PCI IRQ 31 (level, low)
ioapic1: intpin 8 -> PCI IRQ 32 (level, low)
ioapic1: intpin 9 -> PCI IRQ 33 (level, low)
ioapic1: intpin 10 -> PCI IRQ 34 (level, low)
ioapic1: intpin 11 -> PCI IRQ 35 (level, low)
ioapic1: intpin 12 -> PCI IRQ 36 (level, low)
ioapic1: intpin 13 -> PCI IRQ 37 (level, low)
ioapic1: intpin 14 -> PCI IRQ 38 (level, low)
ioapic1: intpin 15 -> PCI IRQ 39 (level, low)
ioapic1: intpin 16 -> PCI IRQ 40 (level, low)
ioapic1: intpin 17 -> PCI IRQ 41 (level, low)
ioapic1: intpin 18 -> PCI IRQ 42 (level, low)
ioapic1: intpin 19 -> PCI IRQ 43 (level, low)
ioapic1: intpin 20 -> PCI IRQ 44 (level, low)
ioapic1: intpin 21 -> PCI IRQ 45 (level, low)
ioapic1: intpin 22 -> PCI IRQ 46 (level, low)
ioapic1: intpin 23 -> PCI IRQ 47 (level, low)
MADT: Found IO APIC ID 11, Interrupt 48 at 0xfec80100
ioapic2: intpin 0 -> PCI IRQ 48 (level, low)
ioapic2: intpin 1 -> PCI IRQ 49 (level, low)
ioapic2: intpin 2 -> PCI IRQ 50 (level, low)
ioapic2: intpin 3 -> PCI IRQ 51 (level, low)
ioapic2: intpin 4 -> PCI IRQ 52 (level, low)
ioapic2: intpin 5 -> PCI IRQ 53 (level, low)
ioapic2: intpin 6 -> PCI IRQ 54 (level, low)
ioapic2: intpin 7 -> PCI IRQ 55 (level, low)
ioapic2: intpin 8 -> PCI IRQ 56 (level, low)
ioapic2: intpin 9 -> PCI IRQ 57 (level, low)
ioapic2: intpin 10 -> PCI IRQ 58 (level, low)
ioapic2: intpin 11 -> PCI IRQ 59 (level, low)
ioapic2: intpin 12 -> PCI IRQ 60 (level, low)
ioapic2: intpin 13 -> PCI IRQ 61 (level, low)
ioapic2: intpin 14 -> PCI IRQ 62 (level, low)
ioapic2: intpin 15 -> PCI IRQ 63 (level, low)
ioapic2: intpin 16 -> PCI IRQ 64 (level, low)
ioapic2: intpin 17 -> PCI IRQ 65 (level, low)
ioapic2: intpin 18 -> PCI IRQ 66 (level, low)
ioapic2: intpin 19 -> PCI IRQ 67 (level, low)
ioapic2: intpin 20 -> PCI IRQ 68 (level, low)
ioapic2: intpin 21 -> PCI IRQ 69 (level, low)
ioapic2: intpin 22 -> PCI IRQ 70 (level, low)
ioapic2: intpin 23 -> PCI IRQ 71 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic: Routing NMI -> LINT1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <HP D18> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25888086)
pcibios: BIOS version 2.10
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
pci_link0: <ACPI PCI Link LNKA> irq 5 on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link1: <ACPI PCI Link LNKB> irq 7 on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 10 11
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 10 11
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link2: <ACPI PCI Link LNKC> irq 10 on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7 10 11
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7 10 11
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link3: <ACPI PCI Link LNKD> irq 10 on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7 10 11
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 10 N 0 5 7 10 11
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link6: <ACPI PCI Link LNKG> irq 7 on acpi0
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 10 11
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 7 10 11
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
pci_link7: <ACPI PCI Link LNKH> irq 5 on acpi0
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 7 10 11
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 7 10 11
ACPI timer: 1/1 1/0 1/1 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2588, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2589, revid=0x05
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x2660, revid=0x03
bus=0, slot=28, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
found-> vendor=0x8086, dev=0x2658, revid=0x03
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
map[20]: type 4, range 32, base 00001000, size 5, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x2659, revid=0x03
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
map[20]: type 4, range 32, base 00001020, size 5, enabled
pcib0: matched entry for 0.29.INTB
pcib0: slot 29 INTB hardwired to IRQ 17
found-> vendor=0x8086, dev=0x265a, revid=0x03
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=10
map[20]: type 4, range 32, base 00001040, size 5, enabled
pcib0: matched entry for 0.29.INTC
pcib0: slot 29 INTC hardwired to IRQ 18
found-> vendor=0x8086, dev=0x265b, revid=0x03
bus=0, slot=29, func=3
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[20]: type 4, range 32, base 00001060, size 5, enabled
pcib0: matched entry for 0.29.INTD
pcib0: slot 29 INTD hardwired to IRQ 19
found-> vendor=0x8086, dev=0x265c, revid=0x03
bus=0, slot=29, func=7
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base fbef0000, size 10, enabled
pcib0: matched entry for 0.29.INTA
pcib0: slot 29 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x244e, revid=0xd3
bus=0, slot=30, func=0
class=06-04-01, hdrtype=0x01, mfdev=0
cmdreg=0x0147, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x2640, revid=0x03
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0147, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x266f, revid=0x03
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0288, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
map[20]: type 4, range 32, base 00000500, size 4, enabled
pcib0: no PRT entry for 0.31.INTAfound-> vendor=0x8086, dev=0x2652,
revid=0x03
bus=0, slot=31, func=2
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00001080, size 3, enabled
map[14]: type 4, range 32, base 00001088, size 2, enabled
map[18]: type 4, range 32, base 00001090, size 3, enabled
map[1c]: type 4, range 32, base 00001098, size 2, enabled
map[20]: type 4, range 32, base 000010a0, size 4, enabled
map[24]: type 1, range 32, base fbee0000, size 10, enabled
pcib0: matched entry for 0.31.INTB
pcib0: slot 31 INTB hardwired to IRQ 17
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 5
pcib1: subordinate bus 11
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfdf00000-0xfdffffff
pcib1: prefetched decode 0xfff00000-0xfffff
pci5: <ACPI PCI bus> on pcib1
pci5: physical bus=5
found-> vendor=0x8086, dev=0x0329, revid=0x09
bus=5, slot=0, func=0
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x032a, revid=0x09
bus=5, slot=0, func=2
class=06-04-00, hdrtype=0x01, mfdev=1
cmdreg=0x0147, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pcib2: secondary bus 6
pcib2: subordinate bus 8
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xfdf00000-0xfdffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci6: <ACPI PCI bus> on pcib2
pci6: physical bus=6
found-> vendor=0x14e4, dev=0x1648, revid=0x10
bus=6, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base fdff0000, size 16, enabled
pcib2: (null) requested memory range 0xfdff0000-0xfdffffff: good
pcib1: (null) requested memory range 0xfdff0000-0xfdffffff: good
pcib2: matched entry for 6.1.INTA
pcib2: slot 1 INTA hardwired to IRQ 24
found-> vendor=0x14e4, dev=0x1648, revid=0x10
bus=6, slot=1, func=1
class=02-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0156, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns)
intpin=b, irq=7
powerspec 2 supports D0 D3 current D0
MSI supports 8 messages, 64 bit
map[10]: type 1, range 64, base fdfe0000, size 16, enabled
pcib2: (null) requested memory range 0xfdfe0000-0xfdfeffff: good
pcib1: (null) requested memory range 0xfdfe0000-0xfdfeffff: good
pcib2: matched entry for 6.1.INTB
pcib2: slot 1 INTB hardwired to IRQ 25
bge0: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xfdff0000-0xfdffffff irq 24 at device 1.0 on pci6
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdff0000
miibus0: <MII bus> on bge0
brgphy0: <BCM5704 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:14:c2:3b:e1:fb
bge0: [MPSAFE]
bge1: <Broadcom BCM5704C Dual Gigabit Ethernet, ASIC rev. 0x2100> mem
0xfdfe0000-0xfdfeffff irq 25 at device 1.1 on pci6
bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdfe0000
miibus1: <MII bus> on bge1
brgphy1: <BCM5704 10/100/1000baseTX PHY> on miibus1
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
1000baseTX-FDX, auto
bge1: bpf attached
bge1: Ethernet address: 00:14:c2:3b:e1:fa
bge1: [MPSAFE]
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pcib3: secondary bus 9
pcib3: subordinate bus 11
pcib3: I/O decode 0xf000-0xfff
pcib3: memory decode 0xfff00000-0xfffff
pcib3: prefetched decode 0xfff00000-0xfffff
pci9: <ACPI PCI bus> on pcib3
pci9: physical bus=9
pcib4: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pcib4: secondary bus 2
pcib4: subordinate bus 4
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xfff00000-0xfffff
pcib4: prefetched decode 0xfff00000-0xfffff
pci2: <ACPI PCI bus> on pcib4
pci2: physical bus=2
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port
0x1000-0x101f irq 16 at device 29.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1000
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port
0x1020-0x103f irq 17 at device 29.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1020
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port
0x1040-0x105f irq 18 at device 29.2 on pci0
uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1040
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port
0x1060-0x107f irq 19 at device 29.3 on pci0
uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1060
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfbef0000-0xfbef03ff irq
16
at device 29.7 on pci0
ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef0000
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
umass0: vendor 0x0402 USB 2.0 Storage Device, rev 2.00/1.12, addr 2
umass0:0:0:-1: Attached to scbus0
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib5: secondary bus 1
pcib5: subordinate bus 1
pcib5: I/O decode 0x2000-0x3fff
pcib5: memory decode 0xfbf00000-0xfdefffff
pcib5: prefetched decode 0xfff00000-0xfffff
pcib5: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib5
pci1: physical bus=1
found-> vendor=0x0e11, dev=0xb203, revid=0x01
bus=1, slot=2, func=0
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0103, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=7
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002800, size 8, enabled
pcib5: (null) requested I/O range 0x2800-0x28ff: in range
map[14]: type 1, range 32, base fdef0000, size 9, enabled
pcib5: (null) requested memory range 0xfdef0000-0xfdef01ff: good
pcib5: matched entry for 1.2.INTA
pcib5: slot 2 INTA hardwired to IRQ 22
found-> vendor=0x0e11, dev=0xb204, revid=0x01
bus=1, slot=2, func=2
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0197, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00003000, size 8, enabled
pcib5: (null) requested I/O range 0x3000-0x30ff: in range
map[14]: type 1, range 32, base fdee0000, size 11, enabled
pcib5: (null) requested memory range 0xfdee0000-0xfdee07ff: good
map[18]: type 1, range 32, base fded0000, size 13, enabled
pcib5: (null) requested memory range 0xfded0000-0xfded1fff: good
map[1c]: type 1, range 32, base fde00000, size 19, enabled
pcib5: (null) requested memory range 0xfde00000-0xfde7ffff: good
pcib5: matched entry for 1.2.INTB
pcib5: slot 2 INTB hardwired to IRQ 23
found-> vendor=0x1002, dev=0x4752, revid=0x27
bus=1, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fc000000, size 24, enabled
pcib5: (null) requested memory range 0xfc000000-0xfcffffff: good
map[14]: type 4, range 32, base 00003400, size 8, enabled
pcib5: (null) requested I/O range 0x3400-0x34ff: in range
map[18]: type 1, range 32, base fbff0000, size 12, enabled
pcib5: (null) requested memory range 0xfbff0000-0xfbff0fff: good
pci1: <base peripheral> at device 2.0 (no driver attached)
pci1: <base peripheral> at device 2.2 (no driver attached)
pci1: <display, VGA> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 UDMA100 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f irq 7 at device 31.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=00 ostat1=3f
ata0: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x0
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=7f ostat1=7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat0=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: stat1=0x7f err=0x7f lsb=0x7f msb=0x7f
ata1: reset tp2 stat0=ff stat1=ff devices=0x0
ata1: [MPSAFE]
atapci1: <Intel ICH6 SATA150 controller> port
0x1080-0x1087,0x1088-0x108b,0x1090-0x1097,0x1098-0x109b,0x10a0-0x10af mem
0xfbee0000-0xfbee03ff ir
q 17 at device 31.2 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x10a0
atapci1: [MPSAFE]
atapci1: Reserved 0x400 bytes for rid 0x24 type 3 at 0xfbee0000
atapci1: [MPSAFE]
ata2: <ATA channel 0> on atapci1
ata2: SATA connect status=00000000
ata2: [MPSAFE]
ata3: <ATA channel 1> on atapci1
ata3: SATA connect status=00000000
ata3: [MPSAFE]
ata4: <ATA channel 2> on atapci1
ata4: SATA connect status=00000000
ata4: [MPSAFE]
ata5: <ATA channel 3> on atapci1
ata5: SATA connect status=00000000
ata5: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
sio0: irq maps: 0x4a1 0x4b1 0x4a1 0x4a1
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f2-0x3f5 irq 6 drq 2 on
acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed 0
unknown: status reg test failed f0
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xee000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4e1 0x4e1 0x4e1 0x4e1
sio1: probe failed test(s): 4
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99750195 hz
Timecounter "TSC" frequency 3391521599 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a3070c
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
fdc0: output ready timeout
fdc0: input ready timeout
fdc0: input ready timeout
(probe0:umass-sim0:0:0:0): Retrying Command
(probe0:umass-sim0:0:0:0): error 22
(probe0:umass-sim0:0:0:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <SAMSUNG CD-ROM SC-148F PS06> Removable CD-ROM SCSI-0 device
pass0: 40.000MB/s transfers
GEOM: new disk cd0
ATA PseudoRAID loaded
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
ioapic0: routing intpin 17 (PCI IRQ 17) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 19 (PCI IRQ 19) to cluster 0
ioapic1: routing intpin 0 (PCI IRQ 24) to cluster 0
ioapic1: routing intpin 1 (PCI IRQ 25) to cluster 0
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <SAMSUNG CD-ROM SC-148F PS06> Removable CD-ROM SCSI-0 device
cd0: 40.000MB/s transfers
cd0: cd present [261301 x 2048 byte records]
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
---
kind regards,
Christian Meutes
systems engineer
--
claranet gmbh internet service provider
tel +49 (0) 69 - 40 80 18 - 300
email: christian.meutes@de.clara.net http://www.claranet.de/