Hello,
I have recently upgraded my system (hardware wise).
I bought:
Foxconn/Winfast motherboard with the nForce 4 (CK8-04 standard)
http://www.foxconnchannel.com/products_motherboard_2.cfm?pName=NF4K8AC-8EKRS
AMD Athlon 64 3000+
1GB DDR400
ATi X300SE 128mb PCI-E
When I booted my 32bit FreeBSD 5.4-P7 (only ever upgraded the kernel) I
noticed this message:
acpi_bus_number: can't get _ADR
I searched the archives and found this in the 6-betas (so far)
Does anybody know what this means and how to sort it out?
Should I worry about it or forget about it?
Could this message have something to do with the fact I plugged a 20-pin
ATX power connector into a 24-pin ATX power connector on the motherboard,
The motherboard manual says that you can but they recommend using a 24-pin
connector. (Cant see me buying a new PSU that has 24pin ATX connectors
just yet as they cost ???/$$$'s, but will pickup a convertor soon)
Please see below for a full dmseg output.
Cheers,
Jayton
desktop# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE-p7 #1: Sun Sep 18 16:01:22 BST 2005
jay@desktop.jayton.plus.com:/usr/src/sys/i386/compile/UBERHACKER
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3000+ (1808.34-MHz 686-class CPU)
Origin = "AuthenticAMD" Id = 0x20ff0 Stepping = 0
Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
AMD Features=0xe0500000<NX,AMIE,LM,DSP,3DNow!>
real memory = 1073676288 (1023 MB)
avail memory = 1041092608 (992 MB)
ACPI APIC Table: <Nvidia AWRDACPI>
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <Nvidia AWRDACPI> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> port 0x530-0x537 on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.PCI0.APC3 has invalid initial irq 7, ignoring
ACPI link \\_SB_.PCI0.APC4 has invalid initial irq 5, ignoring
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 22
at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
pci0: <serial bus, USB> at device 2.1 (no driver attached)
pcm0: <nVidia nForce4> port 0xec00-0xecff,0xf000-0xf0ff mem
0xfebfd000-0xfebfdfff irq 20 at device 4.0 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
atapci0: <nVidia nForce4 UDMA133 controller> port
0xe000-0xe00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 6.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <GENERIC ATA controller> port
0xcc00-0xcc0f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 irq 22 at
device 7.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
atapci2: <GENERIC ATA controller> port
0xb800-0xb80f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 irq 21 at
device 8.0 on pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
ndis0: <OvisLink WL-8000PCI> mem
0xfe9c0000-0xfe9dffff,0xfe9fe000-0xfe9fffff irq 19 at device 7.0 on pci1
ndis0: NDIS API version: 5.1
ndis0: Ethernet address: 00:4f:62:01:2c:4e
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
pci0: <bridge> at device 10.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <display, VGA> at device 0.0 (no driver attached)
pci5: <display> at device 0.1 (no driver attached)
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcc000-0xcd7ff,0xc0000-0xcbfff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen0: Logitech Camera, rev 1.10/1.00, addr 2
ums0: Acrox USB & PS/2 Mouse, rev 1.10/0.01, addr 3, iclass 3/1
ums0: 5 buttons and Z dir.
Timecounter "TSC" frequency 1808342385 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 76319MB <WDC WD800BB-00JHA0/05.01C05> [155061/16/63] at ata0-master
UDMA100ad1: 238475MB <WDC WD2500JB-00GVA0/08.02D08> [484521/16/63] at
ata0-slave UDMA100
acd0: DVDR <ATAPI DVD RW 8XMax/130D> at ata1-slave PIO4
Mounting root from ufs:/dev/ad1s2a
ndis0: link up