I have installed 5.4-RELEASE10 FreeBSD on Dell PowerEdge 750 which has an internal Drac III/XT Server Management Card. I only found compatibles for RedHat which will talk to the card. Is there anything for freebsd? tomas -- tp PRIVACY & CONFIDENTIALITY This e-mail is private and confidential. If you have, or suspect you have received this message in error please notify the sender as soon as possible and remove from your system. You may not copy, distribute or take any action in reliance on it. Thank you for your co-operation. Please note that whilst best efforts are made, neither the company nor the sender accepts any responsibility for viruses and it is your responsibility to scan the email and attachments (if any). This e-mail has been automatically scanned for viruses by MessageLabs.
Tomas Palfi wrote:> I have installed 5.4-RELEASE10 FreeBSD on Dell PowerEdge 750 which has > an internal Drac III/XT Server Management Card. I only found > compatibles for RedHat which will talk to the card. Is there anything > for freebsd?Have you looked at this port? /usr/ports/sysutils/ipmitool: Quoting IPMITool homepage: "IPMItool is a simple command-line interface to systems that support the Intelligent Platform Management Interface (IPMI) v1.5 specification. It provides the ability to read the SDR and print sensor values, display the contents of the SEL, print FRU information, read and set LAN configuration parameters, and perform chassis power control." Currently only LAN and LANPlus interfaces are supported on FreeBSD. WWW: http://ipmitool.sourceforge.net/