thr3ads.net - freebsd stable - problem with PPPoE STABLE and ADSL 3Com HomeConnect [Sep 2005]

If this information is useful, please help other people find it:
Share via:

ComteZero _

2005-Sep-11 23:37 UTC

problem with PPPoE STABLE and ADSL 3Com HomeConnect

Hello,

it's been two weeks I try to find out what's wrong. Clean install from
cvsup
STABLE (5).
my ADSL account works fine with REL. 4.4+rp_pppoe but not with my new STABLE 
(5) (without using rp_pppoe).
could someone help me on this issue (logs provided here)... two PADI are 
emitted but nothing happens after.
(i saw that someone had a similar problem, but with previous netgraph 
revisions).

thank you.

Since my ADSL modem is 3Com HomeConnect, I've set the 
net.graph.nonstandard_pppoe=1

ng_pppoe.c rev. is 1.67.2.1 <http://1.67.2.1/>
ng_socket.c rev. is 1.53.2.3 <http://1.53.2.3/>

my ppp.conf is :
default:
set log all
set ifaddr X.X.X.X/0 10.0.0.2/0 <http://10.0.0.2/0>

my_isp :
set device PPPoE:xl0
set authname MY_USER
set authkey MY_PWD
set dial
#set login
add default HISADDR


here is a tcpdump -vv -i xl0 :

18:48:40.808687 PPPoE PADI [Host-Uniq 0x00E654C1]
18:48:42.807533 PPPoE PADI [Host-Uniq 0x00E654C1]
18:51:44.010839 PPPoE PADI [Host-Uniq 0x40F195C1]
18:51:46.009639 PPPoE PADI [Host-Uniq 0x40F195C1]


here is my ppp.log:

Sep 11 19:42:17 fidelio ppp[24723]: Phase: Using interface: tun0

Sep 11 19:42:17 fidelio ppp[24723]: Phase: deflink: Created in closed state

Sep 11 19:42:17 fidelio ppp[24723]: tun0: Command: default: set ifaddr 
X.X.X.X/0 10.0.0.2/0 <http://10.0.0.2/0>

Sep 11 19:42:17 fidelio ppp[24723]: tun0: Phase: PPP Started (interactive 
mode).

Sep 11 19:42:17 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Timer: Select returns 1

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Command: /dev/ttyv0: load my_isp
 
Sep 11 19:42:23 fidelio ppp[24723]: tun0: ID0: 0x282e97c0 = 
fopen("/etc/ppp/ppp.conf", "r")

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Debug: ReadSystem: Checking 
default (/etc/ppp/ppp.conf).

Sep 11 19:42:23 fidelio ppp[24723]: tun0: ID0: 0x282e97c0 = 
fopen("/etc/ppp/ppp.conf", "r")

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Debug: ReadSystem: Checking 
easyconnect (/etc/ppp/ppp.conf).

Sep 11 19:42:23 fidelio ppp[24723]: tun0: ID0: 0x282e97c0 = 
fopen("/etc/ppp/ppp.conf", "r")

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Debug: ReadSystem: Checking 
easyconnect (/etc/ppp/ppp.conf).

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Command: easyconnect: set device 
PPPoE:xl0

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Command: easyconnect: set authname 
MY_USER
 
Sep 11 19:42:23 fidelio ppp[24723]: tun0: Command: easyconnect: set authkey 
********

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Command: easyconnect: set dial

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Command: easyconnect: add default 
HISADDR

Sep 11 19:42:23 fidelio ppp[24723]: tun0: ID0: 3 = socket(17, 3, 0)

Sep 11 19:42:23 fidelio ppp[24723]: tun0: ID0: -1 = write(3, data, 140)

Sep 11 19:42:23 fidelio ppp[24723]: tun0: TCP/IP: rt_Set failure:

Sep 11 19:42:23 fidelio ppp[24723]: tun0: TCP/IP: rt_Set: Cmd = Add

Sep 11 19:42:23 fidelio ppp[24723]: tun0: TCP/IP: rt_Set: Dst
0.0.0.0/0<http://0.0.0.0/0>

Sep 11 19:42:23 fidelio ppp[24723]: tun0: TCP/IP: rt_Set: Gateway
10.0.0.2<http://10.0.0.2/>

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Debug: wrote -1: cmd = Add, dst = 
0.0.0.0/0 <http://0.0.0.0/0>, gateway = 10.0.0.2 <http://10.0.0.2/>

Sep 11 19:42:23 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Timer: Select returns 1

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Command: /dev/ttyv0: dial

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Phase: bundle: Establish

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Phase: deflink: closed -> opening

Sep 11 19:42:26 fidelio ppp[24723]: tun0: ID0: 0 = NgMkSockNode("",
&cs,
&ds)

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: List of netgraph node 
``xl0:'' (id 2) hooks:

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Found orphans -> ethernet

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Connecting netgraph socket 
.:tun0 -> [4]::tun0

Sep 11 19:42:26 fidelio ppp[24723]: tun0: ID0: 4 = socket(2, 2, 0)

Sep 11 19:42:26 fidelio ppp[24723]: tun0: ID0: 0 = ioctl(4, 3223349521, 
0xbfbfdd90)

Sep 11 19:42:26 fidelio ppp[24723]: tun0: ID0: 0 = ioctl(4, 2149607696, 
0xbfbfdd90)

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Sending PPPOE_CONNECT to 
.:tun0

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Found the following 
interfaces:

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Index 1, name "fxp0"

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Index 2, name "xl0"

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Index 3, name "plip0"

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Index 4, name "lo0"

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Index 5, name "tun0"

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Timer: timer_Start: Inserting 
physical throughput timer[0x80be068]

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Phase: deflink: Connected!

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Phase: deflink: opening -> dial

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Chat: deflink: Dial attempt 1 of 1

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Phase: deflink: dial -> carrier

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Debug: Waiting for carrier

Sep 11 19:42:26 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Sep 11 19:42:27 fidelio ppp[24723]: tun0: Timer: Select returns -1

Sep 11 19:42:27 fidelio ppp[24723]: tun0: Timer: ---- Begin of Timer Service 
List---

Sep 11 19:42:27 fidelio ppp[24723]: tun0: Timer: physical throughput 
timer[0x80be068]: freq = 1.00s, next = 0.00s, state = running

Sep 11 19:42:27 fidelio ppp[24723]: tun0: Timer: ---- End of Timer Service 
List ---

Sep 11 19:42:27 fidelio ppp[24723]: tun0: Timer: timer_Start: Inserting 
physical throughput timer[0x80be068]

Sep 11 19:42:27 fidelio ppp[24723]: tun0: Debug: Waiting for carrier

Sep 11 19:42:27 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Sep 11 19:42:28 fidelio ppp[24723]: tun0: Timer: Select returns -1

Sep 11 19:42:28 fidelio ppp[24723]: tun0: Timer: ---- Begin of Timer Service 
List---

Sep 11 19:42:28 fidelio ppp[24723]: tun0: Timer: physical throughput 
timer[0x80be068]: freq = 1.00s, next = 0.00s, state = running

Sep 11 19:42:28 fidelio ppp[24723]: tun0: Timer: ---- End of Timer Service 
List ---

Sep 11 19:42:28 fidelio ppp[24723]: tun0: Timer: timer_Start: Inserting 
physical throughput timer[0x80be068]

Sep 11 19:42:28 fidelio ppp[24723]: tun0: Debug: Waiting for carrier

Sep 11 19:42:28 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Sep 11 19:42:29 fidelio ppp[24723]: tun0: Timer: Select returns -1

Sep 11 19:42:29 fidelio ppp[24723]: tun0: Timer: ---- Begin of Timer Service 
List---

Sep 11 19:42:29 fidelio ppp[24723]: tun0: Timer: physical throughput 
timer[0x80be068]: freq = 1.00s, next = 0.00s, state = running

Sep 11 19:42:29 fidelio ppp[24723]: tun0: Timer: ---- End of Timer Service 
List ---

Sep 11 19:42:29 fidelio ppp[24723]: tun0: Timer: timer_Start: Inserting 
physical throughput timer[0x80be068]

Sep 11 19:42:29 fidelio ppp[24723]: tun0: Debug: Waiting for carrier

Sep 11 19:42:29 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Sep 11 19:42:30 fidelio ppp[24723]: tun0: Timer: Select returns -1

Sep 11 19:42:30 fidelio ppp[24723]: tun0: Timer: ---- Begin of Timer Service 
List---

Sep 11 19:42:30 fidelio ppp[24723]: tun0: Timer: physical throughput 
timer[0x80be068]: freq = 1.00s, next = 0.00s, state = running

Sep 11 19:42:30 fidelio ppp[24723]: tun0: Timer: ---- End of Timer Service 
List ---

Sep 11 19:42:30 fidelio ppp[24723]: tun0: Timer: timer_Start: Inserting 
physical throughput timer[0x80be068]

Sep 11 19:42:30 fidelio ppp[24723]: tun0: Debug: Waiting for carrier

Sep 11 19:42:30 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Timer: Select returns -1

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Timer: ---- Begin of Timer Service 
List---

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Timer: physical throughput 
timer[0x80be068]: freq = 1.00s, next = 0.00s, state = running

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Timer: ---- End of Timer Service 
List ---

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Timer: timer_Start: Inserting 
physical throughput timer[0x80be068]

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Phase: deflink: Disconnected!

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Phase: deflink: carrier -> hangup

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Debug: deflink: Close

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Phase: deflink: Connect time: 5 
secs: 0 octets in, 0 octets out

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Phase: deflink: 0 packets in, 0 
packets out

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Phase: total 0 bytes/sec, peak 0 
bytes/sec on Sun Sep 11 19:42:26 2005

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Phase: deflink: hangup -> closed

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Debug: route_IfDelete (5)

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Debug: Found ff02:5::/32 
fe80:5::208:c7ff:fe7f:7535

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Debug: route_IfDelete: Skip it 
(pass 0)

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Debug: Found ff02:5::/32 
fe80:5::208:c7ff:fe7f:7535

Sep 11 19:42:31 fidelio ppp[24723]: tun0: ID0: 2 = socket(17, 3, 0)

Sep 11 19:42:31 fidelio ppp[24723]: tun0: ID0: 148 = write(2, data, 148)

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Debug: wrote 148: cmd = Delete, 
dst = ff02:5::/32, gateway = <none>

Sep 11 19:42:31 fidelio ppp[24723]: tun0: ID0: 2 = socket(2, 2, 0)

Sep 11 19:42:31 fidelio ppp[24723]: tun0: ID0: 0 = ioctl(2, 3223349521, 
0xbfbfe970)

Sep 11 19:42:31 fidelio ppp[24723]: tun0: ID0: 0 = ioctl(2, 2149607696, 
0xbfbfe970)

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Phase: bundle: Dead

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Timer: timer_Start: Inserting dial 
timer[0x80bcd44]

Sep 11 19:42:31 fidelio ppp[24723]: tun0: Timer: prompt /dev/ttyv0: fdset(r) 
0

Thx,

ComteZero _

2005-Sep-13 00:21 UTC

head link

problem with PPPoE STABLE and ADSL 3Com HomeConnect

With ppp.log in attach file since the email seemed unreadable.

On 9/12/05, ComteZero _ <comte0@gmail.com> wrote:> 
> Hello,
> 
> it's been two weeks I try to find out what's wrong. Clean install
from
> cvsup STABLE (5).
> my ADSL account works fine with REL. 4.4+rp_pppoe but not with my new 
> STABLE (5) (without using rp_pppoe).
> could someone help me on this issue (logs provided here)... two PADI are 
> emitted but nothing happens after.
> (i saw that someone had a similar problem, but with previous netgraph 
> revisions).
> 
> thank you.
> 
> Since my ADSL modem is 3Com HomeConnect, I've set the 
> net.graph.nonstandard_pppoe=1
> 
> ng_pppoe.c rev. is 1.67.2.1 <http://1.67.2.1/>
> ng_socket.c rev. is 1.53.2.3 <http://1.53.2.3/>
> 
> my ppp.conf is :
> default:
> set log all
> set ifaddr X.X.X.X/0 10.0.0.2/0 <http://10.0.0.2/0>
> 
> my_isp :
> set device PPPoE:xl0
> set authname MY_USER
> set authkey MY_PWD
> set dial
> #set login
> add default HISADDR
> 
> 
> here is a tcpdump -vv -i xl0 :
> 
> 18:48:40.808687 PPPoE PADI [Host-Uniq 0x00E654C1]
> 18:48:42.807533 PPPoE PADI [Host-Uniq 0x00E654C1]
> 18:51:44.010839 PPPoE PADI [Host-Uniq 0x40F195C1]
> 18:51:46.009639 PPPoE PADI [Host-Uniq 0x40F195C1]
> 
> Thx,

Gleb Smirnoff

2005-Sep-19 08:39 UTC

head link

problem with PPPoE STABLE and ADSL 3Com HomeConnect

On Mon, Sep 12, 2005 at 08:37:03AM +0200, ComteZero _ wrote:
C> Hello,
C> 
C> it's been two weeks I try to find out what's wrong. Clean install
from cvsup
C> STABLE (5).
C> my ADSL account works fine with REL. 4.4+rp_pppoe but not with my new
STABLE
C> (5) (without using rp_pppoe).
C> could someone help me on this issue (logs provided here)... two PADI are 
C> emitted but nothing happens after.
C> (i saw that someone had a similar problem, but with previous netgraph 
C> revisions).
C> 
C> thank you.
C> 
C> Since my ADSL modem is 3Com HomeConnect, I've set the 
C> net.graph.nonstandard_pppoe=1

In modern FreeBSD versions 3Com mode for ng_pppoe is switched per-node, not
via sysctl. You should use ppp(8) option to enable 3Com mode:

	set pppoe 3Com

-- 
Totus tuus, Glebius.
GLEBIUS-RIPN GLEB-RIPE

freebsd stable - Sep 2005 - problem with PPPoE STABLE and ADSL 3Com HomeConnect

problem with PPPoE STABLE and ADSL 3Com HomeConnect

problem with PPPoE STABLE and ADSL 3Com HomeConnect

problem with PPPoE STABLE and ADSL 3Com HomeConnect