On 7/17/2005 22:15, Jonathan Weiss wrote:
>Cheers,
>
>
>Yesterday I updated my 5-STABLE system to RELENG_6 through cvsup&make.
>My machine will only boot in safe mode. Verbose or normal boot will result
>in a hang that occuers normally during local package startup or filesystem
>scan.
>
>I get no panic or LOR, the machine just completely hangs.
>
>I used the GENERIC kernel with these points added:
>---------------------------------------------------
># PF
>device pf
>device pflog
>device pfsync
>
># ALTQ
>options ALTQ
>options ALTQ_CBQ # Class Bases Queueing
>options ALTQ_RED # Random Early Drop
>options ALTQ_RIO # RED In/Out
>options ALTQ_HFSC # Hierarchical Packet Scheduler
>options ALTQ_CDNR # Traffic conditioner
>options ALTQ_PRIQ # Priority Queueing
>options ALTQ_NOPCC # Required for SMP build
>options ALTQ_DEBUG
>
># Sound
>device sound
>device "snd_via82c686"
>
>#atapicam
>device atapicam
>
># GBDE
>options GEOM_BDE
>
>options COMPAT_FREEBSD5
>---------------------------------------------------
>
>I also tried a kernel with `options SMP` commented out but it still hangs.
>
>The dmesg:
>---------------------------------------------------
>Copyright (c) 1992-2005 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
>FreeBSD 6.0-BETA1 #2: Sat Jul 16 23:22:20 CEST 2005
> root@satan.nodomain:/usr/obj/usr/src/sys/XXX
>WARNING: WITNESS option enabled, expect reduced performance.
>Timecounter "i8254" frequency 1193182 Hz quality 0
>CPU: AMD Athlon(tm) XP 2500+ (1830.01-MHz 686-class CPU)
> Origin = "AuthenticAMD" Id = 0x6a0 Stepping = 0
>
>Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
>CMOV,PAT,PSE36,MMX,FXSR,SSE>
> AMD Features=0xc0400800<SYSCALL,MMX+,3DNow+,3DNow>
>real memory = 536805376 (511 MB)
>avail memory = 515989504 (492 MB)
>npx0: [FAST]
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>cpu0 on motherboard
>pcib0: <Host to PCI bridge> pcibus 0 on motherboard
>pir0: <PCI Interrupt Routing Table: 11 Entries> on motherboard
>pci0: <PCI bus> on pcib0
>$PIR: No matching entry for 0.1.INTA
>$PIR: No matching entry for 0.2.INTA
>$PIR: No matching entry for 0.2.INTB
>$PIR: No matching entry for 0.2.INTC
>$PIR: No matching entry for 0.4.INTA
>$PIR: No matching entry for 0.6.INTA
>agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at
device
>0.0 on pci0
>pci0: <memory, RAM> at device 0.1 (no driver attached)
>pci0: <memory, RAM> at device 0.2 (no driver attached)
>pci0: <memory, RAM> at device 0.3 (no driver attached)
>pci0: <memory, RAM> at device 0.4 (no driver attached)
>pci0: <memory, RAM> at device 0.5 (no driver attached)
>isab0: <PCI-ISA bridge> at device 1.0 on pci0
>isa0: <ISA bus> on isab0
>pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
>ohci0: <OHCI (generic) USB controller> mem 0xe0003000-0xe0003fff irq
12 at
>device 2.0 on pci0
>ohci0: [GIANT-LOCKED]
>usb0: OHCI version 1.0, legacy support
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 3 ports with 3 removable, self powered
>ohci1: <OHCI (generic) USB controller> mem 0xe0004000-0xe0004fff irq
11 at
>device 2.1 on pci0
>ohci1: [GIANT-LOCKED]
>usb1: OHCI version 1.0, legacy support
>usb1: <OHCI (generic) USB controller> on ohci1
>usb1: USB revision 1.0
>uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub1: 3 ports with 3 removable, self powered
>ehci0: <EHCI (generic) USB 2.0 controller> mem 0xe0005000-0xe00050ff
irq 5
>at device 2.2 on pci0
>ehci0: [GIANT-LOCKED]
>usb2: EHCI version 1.0
>usb2: companion controllers, 4 ports each: usb0 usb1
>usb2: <EHCI (generic) USB 2.0 controller> on ehci0
>usb2: USB revision 2.0
>uhub2: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
>uhub2: 6 ports with 6 removable, self powered
>ulpt0: Brother HL-5040, rev 2.00/1.00, addr 2, iclass 7/1
>ulpt0: using bi-directional mode
>nve0: <NVIDIA nForce MCP2 Networking Adapter> port 0xd000-0xd007 mem
>0xe0000000-0xe0000fff irq 11 at device 4.0 on pci0
>nve0: Ethernet address 00:0c:6e:57:5a:25
>miibus0: <MII bus> on nve0
>rlphy0: <RTL8201L 10/100 media interface> on miibus0
>rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>nve0: Ethernet address: 00:0c:6e:57:5a:25
>nve0: [GIANT-LOCKED]
>pci0: <multimedia, audio> at device 6.0 (no driver attached)
>pcib1: <PCIBIOS PCI-PCI bridge> at device 8.0 on pci0
>pci1: <PCI bus> on pcib1
>ed0: <NE2000 PCI Ethernet (RealTek 8029)> port 0xc000-0xc01f irq 5 at
device
>8.0 on pci1
>ed0: [GIANT-LOCKED]
>ed0: Ethernet address: 00:a0:d2:14:f5:33
>ed0: if_start running deferred for Giant
>ed0: type NE2000 (16 bit)
>dc0: <Davicom DM9102A 10/100BaseTX> port 0xc400-0xc4ff mem
>0xdf000000-0xdf0000ff irq 12 at device 10.0 on pci1
>miibus1: <MII bus> on dc0
>ukphy0: <Generic IEEE 802.3u media interface> on miibus1
>ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>dc0: Ethernet address: 00:80:ad:04:c6:78
>dc0: if_start running deferred for Giant
>dc0: [GIANT-LOCKED]
>atapci0: <nVidia nForce2 UDMA133 controller> port
>0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 9.0 on pci0
>ata0: <ATA channel 0> on atapci0
>ata1: <ATA channel 1> on atapci0
>pcib2: <PCI-PCI bridge> at device 30.0 on pci0
>pci2: <PCI bus> on pcib2
>$PIR: ROUTE_INTERRUPT failed.
>pci2: <display, VGA> at device 0.0 (no driver attached)
>pmtimer0 on isa0
>orm0: <ISA Option ROMs> at iomem 0xc0000-0xcb7ff,0xcc000-0xcd7ff on
isa0
>atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>atkbd0: <AT Keyboard> irq 1 on atkbdc0
>kbd0 at atkbd0
>atkbd0: [GIANT-LOCKED]
>fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq
2 on
>isa0
>fdc0: [FAST]
>ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
>ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
>ppc0: FIFO with 16/16/16 bytes threshold
>ppbus0: <Parallel port bus> on ppc0
>plip0: <PLIP network interface> on ppbus0
>lpt0: <Printer> on ppbus0
>lpt0: Interrupt-driven port
>ppi0: <Parallel I/O> on ppbus0
>sc0: <System console> at flags 0x100 on isa0
>sc0: VGA <16 virtual consoles, flags=0x300>
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>sio0: type 16550A
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
>unknown: <PNP0303> can't assign resources (port)
>unknown: <PNP0c01> can't assign resources (memory)
>unknown: <PNP0501> can't assign resources (port)
>unknown: <PNP0700> can't assign resources (port)
>unknown: <PNP0401> can't assign resources (port)
>unknown: <PNP0501> can't assign resources (port)
>Timecounter "TSC" frequency 1830013124 Hz quality 800
>Timecounters tick every 1.000 msec
>ad0: 76319MB <WDC WD800JB-00FSA0 77.07W77> at ata0-master PIO4
>ad1: 190782MB <WDC WD2000BB-14GUA0 08.02D08> at ata0-slave PIO4
>acd0: CDRW <LITE-ON LTR-12101B/LS3B> at ata1-master PIO4
>acd1: DVDROM <TOSHIBA DVD-ROM SD-M1712/1004> at ata1-slave PIO4
>ATA PseudoRAID loaded
>Trying to mount root from ufs:/dev/ad0s1a
>cd0 at ata1 bus 0 target 0 lun 0
>cd0: <LITE-ON LTR-12101B LS3B> Removable CD-ROM SCSI-0 device
>cd0: 16.000MB/s transfers
>cd0: Attempt to query device size failed: NOT READY, Medium not present -
>tray closed
>cd1 at ata1 bus 0 target 1 lun 0
>cd1: <TOSHIBA DVD-ROM SD-M1712 1004> Removable CD-ROM SCSI-0 device
>cd1: 16.000MB/s transfers
>cd1: Attempt to query device size failed: NOT READY, Medium not present
>dc0: failed to force tx and rx to idle state
>dc0: failed to force tx and rx to idle state
>dc0: failed to force tx and rx to idle state
>dc0: failed to force tx and rx to idle state
>WARNING: attempt to net_add_domain(netgraph) after domainfinalize()
>WARNING: /private was not properly dismounted
>ad1: FAILURE - out of memory in start
>
>
>
>--
>Jonathan Weiss
>http://blog.innerewut.de
>
>
>_______________________________________________
>freebsd-stable@freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-stable
>To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"
>
>
>
What happens if you drop ATAPICAM and do you have a good reason why you
are including GEOM_BDE?
Thanks
S.