Hello,
I have a problem with server with Adaptec SCSI RAID 2120S controller.
5.4-RELEASE was installed.
GENERIC kernel boots with long delay (about 10 minutes), printing following
messages:
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
...
Is somebody knows how to fix this ?
dmesg boot output:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.00GHz (2800.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 2147352576 (2047 MB)
avail memory = 2095861760 (1998 MB)
ioapic1: Changing APIC ID to 10
ioapic1: WARNING: intbase 72 != expected base 24
ioapic2: Changing APIC ID to 8
ioapic2: WARNING: intbase 24 != expected base 96
ioapic3: Changing APIC ID to 9
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic2 <Version 2.0> irqs 24-47 on motherboard
ioapic3 <Version 2.0> irqs 48-71 on motherboard
ioapic1 <Version 2.0> irqs 72-95 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci3: <ACPI PCI bus> on pcib2
aac0: <Adaptec SCSI RAID 2120S> mem 0xf8000000-0xfbffffff irq 24 at device
1.0 on pci3
aac0: Unknown processor 100MHz, 48MB cache memory, optional battery not
installed
aac0: Kernel 4.2-0, Build 7349, S/N c0b92b
aac0: Supported
Options=31d7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
aacp0: <SCSI Passthrough Bus> on aac0
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci5: <ACPI PCI bus> on pcib5
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xcc00-0xcc3f mem 0xfc9e0000-0xfc9fffff irq 74 at device 1.0 on pci5
em0: Ethernet address: 00:30:48:83:67:be
em0: Speed:N/A Duplex:N/A
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xc800-0xc83f mem 0xfc9a0000-0xfc9bffff irq 75 at device 2.0 on pci5
em1: Ethernet address: 00:30:48:83:67:bf
em1: Speed:N/A Duplex:N/A
uhci0: <UHCI (generic) USB controller> port 0xe800-0xe81f irq 16 at device
29.0 on pci0
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xec00-0xec1f irq 19 at device
29.1 on pci0
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
pci0: <base peripheral, interrupt controller> at device 29.5 (no driver
attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci6: <ACPI PCI bus> on pcib6
pci6: <display, VGA> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
orm0: <ISA Option ROMs> at iomem
0xcd800-0xce7ff,0xcc800-0xcd7ff,0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2800113841 Hz quality 800
Timecounters tick every 10.000 msec
aacd0: <RAID 5> on aac0
aacd0: 139992MB (286703616 sectors)
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
aac0: Error 5 sending GetDeviceProbeInfo command
ses0 at aacp0 bus 0 target 8 lun 0
ses0: <SUPER GEM359 REV001 1.09> Fixed unknown SCSI-2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
pass0 at aacp0 bus 0 target 0 lun 0
pass0: <FUJITSU MAP3367NC 0108> Fixed unknown SCSI-3 device
aac0: Error 5 sending GetDeviceProbeInfo command
pass1 at aacp0 bus 0 target 1 lun 0
pass1: <FUJITSU MAP3367NC 0108> Fixed unknown SCSI-3 device
pass1: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
pass2 at aacp0 bus 0 target 2 lun 0
pass2: <FUJITSU MAP3367NC 0108> Fixed unknown SCSI-3 device
pass2: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
pass3 at aacp0 bus 0 target 3 lun 0
pass3: <FUJITSU MAP3367NC 0108> Fixed unknown SCSI-3 device
pass3: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
pass4 at aacp0 bus 0 target 4 lun 0
pass4: <FUJITSU MAP3367NC 0108> Fixed unknown SCSI-3 device
pass4: 160.000MB/s transfers (80.000MHz, offset 127, 16bit)
Mounting root from ufs:/dev/aacd0s1a
em0: Link is up 100 Mbps Full Duplex
--