Viktor Rosendahl
2005-Apr-23 01:15 UTC
5.4-RC3 Kernel Panic: "vinvalbuf: dirty bufs" (backtrace included)
Hi,
Last night when I was asleep my FreeBSD workstation suffered a kernel panic
and did a coredump. The panic occurred at 3.02 AM, that is one minute after
the start of the daily script (coincidence?).
The only "unusual" thing I have been doing before the panic was that I
was
playing with a 1GB USB Flash memory stick. I found out that in order to
create a partition on the device, I need to make it slightly smaller than the
maximum suggested by sysinstall (I used sysinstall to partition the device
out of pure lazyness). However, I think the panic occurred a couple of hours
later and the USB media was not mounted at the time (not 100% sure but I
think so), so I don't think it is related but I can be wrong.
The system was built with CPUTYPE?=p4 from a cvs(up) snapshot of the
RELENG_5_4 branch taken sometime on Wednesday April 20th.
best regards,
Viktor
Here is the backtrace that I obtained from kgdb:
#0 doadump () at pcpu.h:159
#1 0xc05c7a2a in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:410
#2 0xc05c7d31 in panic (fmt=0xc07fcb12 "vinvalbuf: dirty bufs")
at /usr/src/sys/kern/kern_shutdown.c:566
#3 0xc0626032 in vinvalbuf (vp=0xc4ae4210, flags=1, cred=0x0, td=0x0,
slpflag=0, slptimeo=0) at /usr/src/sys/kern/vfs_subr.c:972
#4 0xc06298e5 in vclean (vp=0xc4ae4210, flags=8, td=0xc235f480)
at /usr/src/sys/kern/vfs_subr.c:2478
#5 0xc062a0ea in vgonel (vp=0xc4ae4210, td=0x0)
at /usr/src/sys/kern/vfs_subr.c:2697
#6 0xc0624d83 in vlrureclaim (mp=0xc261a800) at pcpu.h:156
#7 0xc06250af in vnlru_proc () at /usr/src/sys/kern/vfs_subr.c:598
#8 0xc05af48a in fork_exit (callout=0xc0624e5d <vnlru_proc>, arg=0x0,
frame=0x0) at /usr/src/sys/kern/kern_fork.c:790
#9 0xc0790d0c in fork_trampoline () at /usr/src/sys/i386/i386/exception.s:209
And the content of the info file:
Dump header from device /dev/ad4s1b
Architecture: i386
Architecture Version: 16777216
Dump Length: 1073414144B (1023 MB)
Blocksize: 512
Dumptime: Sat Apr 23 03:02:10 2005
Hostname: <hostname removed before posting>
Magic: FreeBSD Kernel Dump
Version String: FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005
<hostname removed before posting>:/usr/obj/usr/src/sys/ATA
Panic String: vinvalbuf: dirty bufs
Dump Parity: 3518619234
Bounds: 21
Dump Status: good
...and here is the dmesg that I obtained after the machine had rebooted after
the panic:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005
<hostname removed before posting>:/usr/obj/usr/src/sys/ATA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073414144 (1023 MB)
avail memory = 1040875520 (992 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device
0.0
on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq
16
at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq
19
at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq
18
at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq
16
at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq
23 at
device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem
0xfeafc000-0xfeafffff
irq 22 at device 5.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:d8:52:51:d6
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
atapci0: <Promise PDC20269 UDMA133 controller> port
0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem
0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at
device 10.0 on pci2
em0: Ethernet address: 00:0e:0c:06:21:17
em0: Speed:N/A Duplex:N/A
asr0: <Adaptec Caching SCSI RAID> mem 0xe8000000-0xefffffff irq 20 at
device
12.0 on pci2
asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O
pcib3: <PCI-PCI bridge> at device 12.1 on pci2
pci3: <PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem
0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1985 AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
on
acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <ISA Option ROMs> at iomem
0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2605920328 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled
acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BS0R> at ata0-master PIO4
acd1: DVDROM <DVD-ROM BDV316E/VER 0049> at ata0-slave PIO4
ad4: 190782MB <WDC WD2000JB-00DUA0/65.13G65> [387621/16/63] at ata2-master
UDMA100
ad6: 286103MB <Maxtor 4A300J0/RAMB1TV0> [581290/16/63] at ata3-master
UDMA133
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-5 3A0L> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <LITE-ON DVDRW SOHW-1633S BS0R> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [2133520 x 2048 byte records]
cd1 at ata0 bus 0 target 1 lun 0
cd1: <DVD-16X DVD-ROM BDV316E 0049> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: cd present [3911061 x 2048 byte records]
Mounting root from ufs:/dev/ad4s1a
em0: Link is up 1000 Mbps Full Duplex
drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem
0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
info: [drm] Loading R200 Microcode
umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready
change,
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retries Exhausted
Opened disk da1 -> 6
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
umass0: at uhub4 port 1 (addr 2) disconnected
(da1:umass-sim0:0:0:0): lost device
(da1:umass-sim0:0:0:0): removing device entry
umass0: detached
umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready
change,
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retries Exhausted
Opened disk da1 -> 6
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): WRITE(10). CDB: 2a 0 0 0 0 21 0 0 8 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): DATA PROTECT asc:27,0
(da1:umass-sim0:0:0:0): Write protected
(da1:umass-sim0:0:0:0): Unretryable error
umass0: at uhub4 port 1 (addr 2) disconnected
(da1:umass-sim0:0:0:0): lost device
(da1:umass-sim0:0:0:0): removing device entry
umass0: detached
umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2
da1 at umass-sim0 bus 0 target 0 lun 0
da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device
da1: 40.000MB/s transfers
da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready
change,
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retries Exhausted
Opened disk da1 -> 6
(da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error
(da1:umass-sim0:0:0:0): SCSI Status: Check Condition
(da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
(da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed
(da1:umass-sim0:0:0:0): Retrying Command (per Sense Data)
panic: vinvalbuf: dirty bufs
Uptime: 1d6h1m42s
Dumping 1023 MB
16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 272 288 304 320 336
352 368 384 400 416 432 448 464 480 496 512 528 544 560 576 592 608 624 640
656 672 688 704 720 736 752 768 784 800 816 832 848 864 880 896 912 928 944
960 976 992 1008Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005
<hostname removed before posting>:/usr/obj/usr/src/sys/ATA
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 1073414144 (1023 MB)
avail memory = 1040875520 (992 MB)
ACPI APIC Table: <A M I OEMAPIC >
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device
0.0
on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci1: <display> at device 0.1 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq
16
at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq
19
at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq
18
at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq
16
at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq
23 at
device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem
0xfeafc000-0xfeafffff
irq 22 at device 5.0 on pci2
skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:11:d8:52:51:d6
miibus0: <MII bus> on sk0
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX,
auto
atapci0: <Promise PDC20269 UDMA133 controller> port
0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem
0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at
device 10.0 on pci2
em0: Ethernet address: 00:0e:0c:06:21:17
em0: Speed:N/A Duplex:N/A
asr0: <Adaptec Caching SCSI RAID> mem 0xe8000000-0xefffffff irq 20 at
device
12.0 on pci2
asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O
pcib3: <PCI-PCI bridge> at device 12.1 on pci2
pci3: <PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem
0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0
pcm0: <Analog Devices AD1985 AC97 Codec>
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2
on
acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
npx0: <math processor> on motherboard
npx0: INT 16 interface
orm0: <ISA Option ROMs> at iomem
0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2605921612 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled
acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BS0R> at ata0-master PIO4
acd1: DVDROM <DVD-ROM BDV316E/VER 0049> at ata0-slave PIO4
ad4: 190782MB <WDC WD2000JB-00DUA0/65.13G65> [387621/16/63] at ata2-master
UDMA100
ad6: 286103MB <Maxtor 4A300J0/RAMB1TV0> [581290/16/63] at ata3-master
UDMA133
da0 at asr0 bus 0 target 0 lun 0
da0: <ADAPTEC RAID-5 3A0L> Fixed Direct Access SCSI-2 device
da0: Tagged Queueing Enabled
da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C)
cd0 at ata0 bus 0 target 0 lun 0
cd0: <LITE-ON DVDRW SOHW-1633S BS0R> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: cd present [2133520 x 2048 byte records]
cd1 at ata0 bus 0 target 1 lun 0
cd1: <DVD-16X DVD-ROM BDV316E 0049> Removable CD-ROM SCSI-0 device
cd1: 16.000MB/s transfers
cd1: cd present [3911061 x 2048 byte records]
Mounting root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
WARNING: /home was not properly dismounted
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
WARNING: /big was not properly dismounted
em0: Link is up 1000 Mbps Full Duplex
drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem
0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1
info: [drm] AGP at 0xf8000000 64MB
info: [drm] Initialized radeon 1.11.0 20020828 on minor 0
info: [drm] Loading R200 Microcode
Doug White
2005-Apr-25 21:16 UTC
5.4-RC3 Kernel Panic: "vinvalbuf: dirty bufs" (backtrace included)
On Sat, 23 Apr 2005, Viktor Rosendahl wrote:> Hi, > > Last night when I was asleep my FreeBSD workstation suffered a kernel panic > and did a coredump. The panic occurred at 3.02 AM, that is one minute after > the start of the daily script (coincidence?). > > The only "unusual" thing I have been doing before the panic was that I was > playing with a 1GB USB Flash memory stick. I found out that in order to > create a partition on the device, I need to make it slightly smaller than the > maximum suggested by sysinstall (I used sysinstall to partition the device > out of pure lazyness). However, I think the panic occurred a couple of hours > later and the USB media was not mounted at the time (not 100% sure but I > think so), so I don't think it is related but I can be wrong.Yanking the stick without unmounting it will cause this type of panic. Don't do that. :)> Here is the backtrace that I obtained from kgdb: > > #0 doadump () at pcpu.h:159 > #1 0xc05c7a2a in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:410 > #2 0xc05c7d31 in panic (fmt=0xc07fcb12 "vinvalbuf: dirty bufs") > at /usr/src/sys/kern/kern_shutdown.c:566 > #3 0xc0626032 in vinvalbuf (vp=0xc4ae4210, flags=1, cred=0x0, td=0x0, > slpflag=0, slptimeo=0) at /usr/src/sys/kern/vfs_subr.c:972 > #4 0xc06298e5 in vclean (vp=0xc4ae4210, flags=8, td=0xc235f480) > at /usr/src/sys/kern/vfs_subr.c:2478 > #5 0xc062a0ea in vgonel (vp=0xc4ae4210, td=0x0) > at /usr/src/sys/kern/vfs_subr.c:2697 > #6 0xc0624d83 in vlrureclaim (mp=0xc261a800) at pcpu.h:156 > #7 0xc06250af in vnlru_proc () at /usr/src/sys/kern/vfs_subr.c:598 > #8 0xc05af48a in fork_exit (callout=0xc0624e5d <vnlru_proc>, arg=0x0, > frame=0x0) at /usr/src/sys/kern/kern_fork.c:790 > #9 0xc0790d0c in fork_trampoline () at /usr/src/sys/i386/i386/exception.s:209 > > > And the content of the info file: > > Dump header from device /dev/ad4s1b > Architecture: i386 > Architecture Version: 16777216 > Dump Length: 1073414144B (1023 MB) > Blocksize: 512 > Dumptime: Sat Apr 23 03:02:10 2005 > Hostname: <hostname removed before posting> > Magic: FreeBSD Kernel Dump > Version String: FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005 > <hostname removed before posting>:/usr/obj/usr/src/sys/ATA > Panic String: vinvalbuf: dirty bufs > Dump Parity: 3518619234 > Bounds: 21 > Dump Status: good > > > ...and here is the dmesg that I obtained after the machine had rebooted after > the panic: > > Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005 > <hostname removed before posting>:/usr/obj/usr/src/sys/ATA > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 1073414144 (1023 MB) > avail memory = 1040875520 (992 MB) > ACPI APIC Table: <A M I OEMAPIC > > ioapic0: Changing APIC ID to 2 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > acpi0: <A M I OEMRSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 > on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci1: <display> at device 0.1 (no driver attached) > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 > at device 29.0 on pci0 > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 > at device 29.1 on pci0 > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 > at device 29.2 on pci0 > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 > at device 29.3 on pci0 > usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at > device 29.7 on pci0 > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <EHCI (generic) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff > irq 22 at device 5.0 on pci2 > skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) > sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 > sk0: Ethernet address: 00:11:d8:52:51:d6 > miibus0: <MII bus> on sk0 > e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto > atapci0: <Promise PDC20269 UDMA133 controller> port > 0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem > 0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2 > ata2: channel #0 on atapci0 > ata3: channel #1 on atapci0 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at > device 10.0 on pci2 > em0: Ethernet address: 00:0e:0c:06:21:17 > em0: Speed:N/A Duplex:N/A > asr0: <Adaptec Caching SCSI RAID> mem 0xe8000000-0xefffffff irq 20 at device > 12.0 on pci2 > asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O > pcib3: <PCI-PCI bridge> at device 12.1 on pci2 > pci3: <PCI bus> on pcib3 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH5 UDMA100 controller> port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci1 > ata1: channel #1 on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem > 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0 > pcm0: <Analog Devices AD1985 AC97 Codec> > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > npx0: <math processor> on motherboard > npx0: INT 16 interface > orm0: <ISA Option ROMs> at iomem > 0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2605920328 Hz quality 800 > Timecounters tick every 10.000 msec > IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled > acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BS0R> at ata0-master PIO4 > acd1: DVDROM <DVD-ROM BDV316E/VER 0049> at ata0-slave PIO4 > ad4: 190782MB <WDC WD2000JB-00DUA0/65.13G65> [387621/16/63] at ata2-master > UDMA100 > ad6: 286103MB <Maxtor 4A300J0/RAMB1TV0> [581290/16/63] at ata3-master UDMA133 > da0 at asr0 bus 0 target 0 lun 0 > da0: <ADAPTEC RAID-5 3A0L> Fixed Direct Access SCSI-2 device > da0: Tagged Queueing Enabled > da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C) > cd0 at ata0 bus 0 target 0 lun 0 > cd0: <LITE-ON DVDRW SOHW-1633S BS0R> Removable CD-ROM SCSI-0 device > cd0: 16.000MB/s transfers > cd0: cd present [2133520 x 2048 byte records] > cd1 at ata0 bus 0 target 1 lun 0 > cd1: <DVD-16X DVD-ROM BDV316E 0049> Removable CD-ROM SCSI-0 device > cd1: 16.000MB/s transfers > cd1: cd present [3911061 x 2048 byte records] > Mounting root from ufs:/dev/ad4s1a > em0: Link is up 1000 Mbps Full Duplex > drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem > 0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1 > info: [drm] AGP at 0xf8000000 64MB > info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 > info: [drm] Loading R200 Microcode > umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2 > da1 at umass-sim0 bus 0 target 0 lun 0 > da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retries Exhausted > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > umass0: at uhub4 port 1 (addr 2) disconnected > (da1:umass-sim0:0:0:0): lost device > (da1:umass-sim0:0:0:0): removing device entry > umass0: detached > umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2 > da1 at umass-sim0 bus 0 target 0 lun 0 > da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retries Exhausted > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): WRITE(10). CDB: 2a 0 0 0 0 21 0 0 8 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): DATA PROTECT asc:27,0 > (da1:umass-sim0:0:0:0): Write protected > (da1:umass-sim0:0:0:0): Unretryable error > umass0: at uhub4 port 1 (addr 2) disconnected > (da1:umass-sim0:0:0:0): lost device > (da1:umass-sim0:0:0:0): removing device entry > umass0: detached > umass0: BUFFALO ClipDrive, rev 2.00/2.00, addr 2 > da1 at umass-sim0 bus 0 target 0 lun 0 > da1: <BUFFALO ClipDrive 2.00> Removable Direct Access SCSI-2 device > da1: 40.000MB/s transfers > da1: Attempt to query device size failed: UNIT ATTENTION, Not ready to ready > change, > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retries Exhausted > Opened disk da1 -> 6 > (da1:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > (da1:umass-sim0:0:0:0): CAM Status: SCSI Status Error > (da1:umass-sim0:0:0:0): SCSI Status: Check Condition > (da1:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0 > (da1:umass-sim0:0:0:0): Not ready to ready change, medium may have changed > (da1:umass-sim0:0:0:0): Retrying Command (per Sense Data) > panic: vinvalbuf: dirty bufs > Uptime: 1d6h1m42s > Dumping 1023 MB > 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240 256 272 288 304 320 336 > 352 368 384 400 416 432 448 464 480 496 512 528 544 560 576 592 608 624 640 > 656 672 688 704 720 736 752 768 784 800 816 832 848 864 880 896 912 928 944 > 960 976 992 1008Copyright (c) 1992-2005 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 5.4-RC3 #0: Thu Apr 21 00:11:58 EEST 2005 > <hostname removed before posting>:/usr/obj/usr/src/sys/ATA > Timecounter "i8254" frequency 1193182 Hz quality 0 > CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2605.92-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 > > Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> > Hyperthreading: 2 logical CPUs > real memory = 1073414144 (1023 MB) > avail memory = 1040875520 (992 MB) > ACPI APIC Table: <A M I OEMAPIC > > ioapic0: Changing APIC ID to 2 > ioapic0 <Version 2.0> irqs 0-23 on motherboard > acpi0: <A M I OEMRSDT> on motherboard > acpi0: Power Button (fixed) > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 > cpu0: <ACPI CPU> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 > on pci0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > pci1: <display, VGA> at device 0.0 (no driver attached) > pci1: <display> at device 0.1 (no driver attached) > uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xef00-0xef1f irq 16 > at device 29.0 on pci0 > usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xef20-0xef3f irq 19 > at device 29.1 on pci0 > usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xef40-0xef5f irq 18 > at device 29.2 on pci0 > usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 > usb2: USB revision 1.0 > uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub2: 2 ports with 2 removable, self powered > uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xef80-0xef9f irq 16 > at device 29.3 on pci0 > usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 > usb3: USB revision 1.0 > uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub3: 2 ports with 2 removable, self powered > ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebffc00-0xfebfffff irq 23 at > device 29.7 on pci0 > usb4: EHCI version 1.0 > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > usb4: <EHCI (generic) USB 2.0 controller> on ehci0 > usb4: USB revision 2.0 > uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 > uhub4: 8 ports with 8 removable, self powered > pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 > pci2: <ACPI PCI bus> on pcib2 > skc0: <Marvell Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeafc000-0xfeafffff > irq 22 at device 5.0 on pci2 > skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) > sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 > sk0: Ethernet address: 00:11:d8:52:51:d6 > miibus0: <MII bus> on sk0 > e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 > e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, > auto > atapci0: <Promise PDC20269 UDMA133 controller> port > 0xdf90-0xdf9f,0xdfe0-0xdfe3,0xdfa8-0xdfaf,0xdfe4-0xdfe7,0xdff0-0xdff7 mem > 0xfeaf8000-0xfeafbfff irq 21 at device 9.0 on pci2 > ata2: channel #0 on atapci0 > ata3: channel #1 on atapci0 > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port > 0xdf00-0xdf3f mem 0xfea80000-0xfea9ffff,0xfeaa0000-0xfeabffff irq 22 at > device 10.0 on pci2 > em0: Ethernet address: 00:0e:0c:06:21:17 > em0: Speed:N/A Duplex:N/A > asr0: <Adaptec Caching SCSI RAID> mem 0xe8000000-0xefffffff irq 20 at device > 12.0 on pci2 > asr0: ADAPTEC 2400A FW Rev. 3A0L, 4 channel, 256 CCBs, Protocol I2O > pcib3: <PCI-PCI bridge> at device 12.1 on pci2 > pci3: <PCI bus> on pcib3 > isab0: <PCI-ISA bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci1: <Intel ICH5 UDMA100 controller> port > 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 > ata0: channel #0 on atapci1 > ata1: channel #1 on atapci1 > pci0: <serial bus, SMBus> at device 31.3 (no driver attached) > pcm0: <Intel ICH5 (82801EB)> port 0xee80-0xeebf,0xe800-0xe8ff mem > 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5 on pci0 > pcm0: <Analog Devices AD1985 AC97 Codec> > acpi_button0: <Power Button> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 > sio0: type 16550A > sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 > sio1: type 16550A > fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on > acpi0 > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > ppc0: <Standard parallel printer port> port 0x378-0x37f irq 7 on acpi0 > ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode > ppbus0: <Parallel port bus> on ppc0 > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > npx0: <math processor> on motherboard > npx0: INT 16 interface > orm0: <ISA Option ROMs> at iomem > 0xd1000-0xd6fff,0xcf800-0xd0fff,0xcd000-0xcf7ff,0xc0000-0xccfff on isa0 > pmtimer0 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > Timecounter "TSC" frequency 2605921612 Hz quality 800 > Timecounters tick every 10.000 msec > IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled > acd0: DVDR <LITE-ON DVDRW SOHW-1633S/BS0R> at ata0-master PIO4 > acd1: DVDROM <DVD-ROM BDV316E/VER 0049> at ata0-slave PIO4 > ad4: 190782MB <WDC WD2000JB-00DUA0/65.13G65> [387621/16/63] at ata2-master > UDMA100 > ad6: 286103MB <Maxtor 4A300J0/RAMB1TV0> [581290/16/63] at ata3-master UDMA133 > da0 at asr0 bus 0 target 0 lun 0 > da0: <ADAPTEC RAID-5 3A0L> Fixed Direct Access SCSI-2 device > da0: Tagged Queueing Enabled > da0: 228957MB (468903936 512 byte sectors: 255H 63S/T 29187C) > cd0 at ata0 bus 0 target 0 lun 0 > cd0: <LITE-ON DVDRW SOHW-1633S BS0R> Removable CD-ROM SCSI-0 device > cd0: 16.000MB/s transfers > cd0: cd present [2133520 x 2048 byte records] > cd1 at ata0 bus 0 target 1 lun 0 > cd1: <DVD-16X DVD-ROM BDV316E 0049> Removable CD-ROM SCSI-0 device > cd1: 16.000MB/s transfers > cd1: cd present [3911061 x 2048 byte records] > Mounting root from ufs:/dev/ad4s1a > WARNING: / was not properly dismounted > WARNING: /home was not properly dismounted > WARNING: /tmp was not properly dismounted > WARNING: /usr was not properly dismounted > WARNING: /var was not properly dismounted > WARNING: /big was not properly dismounted > em0: Link is up 1000 Mbps Full Duplex > drm0: <ATI Radeon If R250 9000> port 0xc000-0xc0ff mem > 0xfe8f0000-0xfe8fffff,0xe0000000-0xe3ffffff irq 16 at device 0.0 on pci1 > info: [drm] AGP at 0xf8000000 64MB > info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 > info: [drm] Loading R200 Microcode > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org" >-- Doug White | FreeBSD: The Power to Serve dwhite@gumbysoft.com | www.FreeBSD.org