We are trying out an Intel 855 that is not able to boot RELENG_5. It locks
up hard (NUM LOCK doesnt work) on bootup at the same spot. However,
RELENG_4 is able to boot just fine.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005
mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs
ACPI APIC Table: <AOpen AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 531496960 (506 MB)
avail memory = 510435328 (486 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
and boot -v
/boot/kernel/acpi.ko text=0x41520 data=0x1da4+0x112c
syms=[0x4+0x7630+0x4+0x9c97]
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009f400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=02 base=00000000fec00000 len=0000000001400000
SMAP type=03 base=000000001fae3000 len=000000000000d000
SMAP type=04 base=000000001fae0000 len=0000000000003000
SMAP type=02 base=000000000009f400 len=0000000000000c00
SMAP type=02 base=000000001faf0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000001f9e0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005
mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0857000.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc085721c.
Preloaded elf module "/boot/modules/arcmsr.ko" at 0xc08572c4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0857370.
Table 'FACP' at 0x1fae30c0
Table 'APIC' at 0x1fae6d40
MADT: Found table at 0x1fae6d40
MP Configuration Table version 1.4 found at 0xc00f0c00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <AOpen AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193068 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1500060146 Hz
CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 531496960 (506 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f1c6fff, 509222912 bytes (124322 pages)
avail memory = 510435328 (486 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf00
bios32: Entry = 0xfb380 (c00fb380) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb3b0
pnpbios: Found PnP BIOS data at 0xc00fbd70
pnpbios: Entry = f0000:bda0 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
ioapic0 <Version 2.0> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Found $PIR table, 13 entries at 0xc00fde90
PCI-Only Interrupts: 5 7 10 11 12
Location Bus Device Pin Link IRQs
slot 1 2 8 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 C 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 D 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 A 0x6a 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 B 0x6b 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 C 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 D 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 A 0x6b 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 B 0x68 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 D 0x6a 3 4 5 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 2 B 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 2 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 2 D 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 26, enabled
found-> vendor=0x8086, dev=0x3580, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3584, revid=0x02
bus=0, slot=0, func=1
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3585, revid=0x02
bus=0, slot=0, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3581, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 27, enabled
map[14]: type 1, range 32, base ed000000, size 19, enabled
map[18]: type 4, range 32, base 0000e300, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3582, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 3, range 32, base 00000000, size 27, memory disabled
But RELENG_4 works fine. I think its getting hung up on the onboard NICs,
not sure. However, I can load them as a KLD. If I disable the NICs in the
BIOS, it still hangs on the same location
FreeBSD 4.10-STABLE #1: Fri Nov 12 10:17:46 EST 2004
mdtancsa@stationtest.sentex.ca:/usr/obj/usr/src/sys/gas
Timecounter "i8254" frequency 1193182 Hz
Timecounter "TSC" frequency 1500059328 Hz
CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 531496960 (519040K bytes)
config> q
avail memory = 513236992 (501208K bytes)
Preloaded elf kernel "kernel" at 0xc03d5000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d509c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fde90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x3584) at 0.1
pci0: <unknown card> (vendor=0x8086, dev=0x3585) at 0.3
pcib1: <PCI to PCI bridge (vendor=8086 device=3581)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
agp1: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xe300-0xe307
mem
0xec100000-0xec17ffff,0xe0000000-0xe7ffffff irq 10 at device 2.0 on pci0
agp1: detected 3964k stolen memory
agp1: aperture size is 128M
pci0: <unknown card> (vendor=0x8086, dev=0x3582) at 2.1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe000-0xe01f irq
10 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe100-0xe11f irq
9
at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xe200-0xe21f irq
7
at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 5
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x11ab, dev=0x4320) at 0.0 irq 11
pci2: <unknown card> (vendor=0x11ab, dev=0x4320) at 1.0 irq 15
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x5000-0x501f irq 12
at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 12
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
to accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100
Mounting root from ufs:/dev/ad0s1a
and if I do a kld load.
skc0: <Marvell Gigabit Ethernet> port 0xd000-0xd0ff mem
0xec040000-0xec043fff irq 11 at device 0.0 on pci2
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
skc1: <Marvell Gigabit Ethernet> port 0xd100-0xd1ff mem
0xec044000-0xec047fff irq 15 at device 1.0 on pci2
skc1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:01:80:5c:0c:cd
sk1: <Marvell Semiconductor, Inc. Yukon> on skc1
sk1: Ethernet address: 00:01:80:5c:0c:cc
miibus0: <MII bus> on sk0
e1000phy0: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus0
e1000phy0: 1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX,
10baseTX, auto
miibus1: <MII bus> on sk1
e1000phy1: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus1
e1000phy1: 1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX,
10baseTX, auto
Disabling ACPI doesnt make a difference either.
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
Can you try setting hw.pci.enable_io_modes=0 at the loader prompt then booting?
I've seen this same problem on a reasonable amount of machines now (mainly
toshiba/acer laptops, but not only)
Regards,
Graham Lilley
Ibex Systems (Maidstone) Ltd
-----Original Message-----
From: owner-freebsd-stable@freebsd.org [mailto:owner-freebsd-stable@freebsd.org]
On Behalf Of Mike Tancsa
Sent: 01 April 2005 19:39
To: freebsd-stable@freebsd.org
Subject: RELENG_5 problems with Intel 855 (RELENG_4 boots fine)
We are trying out an Intel 855 that is not able to boot RELENG_5. It locks up
hard (NUM LOCK doesnt work) on bootup at the same spot. However,
RELENG_4 is able to boot just fine.
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005
mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs
ACPI APIC Table: <AOpen AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 531496960 (506 MB)
avail memory = 510435328 (486 MB)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
and boot -v
/boot/kernel/acpi.ko text=0x41520 data=0x1da4+0x112c
syms=[0x4+0x7630+0x4+0x9c97]
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=01 base=0000000000000000 len=000000000009f400 SMAP type=02
base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000
len=0000000001400000 SMAP type=03 base=000000001fae3000 len=000000000000d000
SMAP type=04 base=000000001fae0000 len=0000000000003000 SMAP type=02
base=000000000009f400 len=0000000000000c00 SMAP type=02 base=000000001faf0000
len=0000000000010000 SMAP type=01 base=0000000000100000 len=000000001f9e0000
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005
mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0857000.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc085721c.
Preloaded elf module "/boot/modules/arcmsr.ko" at 0xc08572c4.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0857370.
Table 'FACP' at 0x1fae30c0
Table 'APIC' at 0x1fae6d40
MADT: Found table at 0x1fae6d40
MP Configuration Table version 1.4 found at 0xc00f0c00
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled ACPI APIC Table: <AOpen
AWRDACPI> Calibrating clock(s) ... i8254 clock: 1193068 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter
"i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC
clock: 1500060146 Hz
CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 531496960 (506 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f1c6fff, 509222912 bytes (124322 pages) avail
memory = 510435328 (486 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf00
bios32: Entry = 0xfb380 (c00fb380) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb3b0
pnpbios: Found PnP BIOS data at 0xc00fbd70
pnpbios: Entry = f0000:bda0 Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: high
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: active-high
ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
mem: <memory>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AOpen AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=35808086)
pcibios: BIOS version 2.10
Found $PIR table, 13 entries at 0xc00fde90 PCI-Only Interrupts: 5 7 10 11 12
Location Bus Device Pin Link IRQs
slot 1 2 8 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 1 2 8 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 A 0x60 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 B 0x61 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 C 0x62 3 4 5 7 9 10 11 12 14 15
slot 2 2 4 D 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 A 0x61 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 B 0x62 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 C 0x63 3 4 5 7 9 10 11 12 14 15
slot 3 2 5 D 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 A 0x62 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 B 0x63 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 C 0x60 3 4 5 7 9 10 11 12 14 15
slot 4 2 6 D 0x61 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 A 0x68 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 B 0x69 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 C 0x6a 3 4 5 7 9 10 11 12 14 15
slot 5 2 0 D 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 A 0x69 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 B 0x6a 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 C 0x6b 3 4 5 7 9 10 11 12 14 15
slot 6 2 1 D 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 A 0x6a 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 B 0x6b 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 C 0x68 3 4 5 7 9 10 11 12 14 15
slot 7 2 2 D 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 A 0x6b 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 B 0x68 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 C 0x69 3 4 5 7 9 10 11 12 14 15
slot 8 2 3 D 0x6a 3 4 5 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 2 B 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 2 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 2 D 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 31 C 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 31 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 31 func 0
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter
"ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x4010
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ACPI PCI link
initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e8000000, size 26, enabled
found-> vendor=0x8086, dev=0x3580, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3584, revid=0x02
bus=0, slot=0, func=1
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3585, revid=0x02
bus=0, slot=0, func=3
class=08-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3581, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 3, range 32, base e0000000, size 27, enabled
map[14]: type 1, range 32, base ed000000, size 19, enabled
map[18]: type 4, range 32, base 0000e300, size 3, enabled
pcib0: matched entry for 0.2.INTA
pcib0: slot 2 INTA hardwired to IRQ 16
found-> vendor=0x8086, dev=0x3582, revid=0x02
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 1 supports D0 D1 D3 current D0
map[10]: type 3, range 32, base 00000000, size 27, memory disabled
But RELENG_4 works fine. I think its getting hung up on the onboard NICs, not
sure. However, I can load them as a KLD. If I disable the NICs in the BIOS, it
still hangs on the same location
FreeBSD 4.10-STABLE #1: Fri Nov 12 10:17:46 EST 2004
mdtancsa@stationtest.sentex.ca:/usr/obj/usr/src/sys/gas
Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC"
frequency 1500059328 Hz
CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class
CPU)
Origin = "GenuineIntel" Id = 0x695 Stepping = 5
Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
real memory = 531496960 (519040K bytes)
config> q
avail memory = 513236992 (501208K bytes) Preloaded elf kernel "kernel"
at 0xc03d5000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d509c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 13 entries at 0xc00fde90
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xebffffff at
device 0.0 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x3584) at 0.1
pci0: <unknown card> (vendor=0x8086, dev=0x3585) at 0.3
pcib1: <PCI to PCI bridge (vendor=8086 device=3581)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
agp1: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xe300-0xe307
mem 0xec100000-0xec17ffff,0xe0000000-0xe7ffffff irq 10 at device 2.0 on pci0
agp1: detected 3964k stolen memory
agp1: aperture size is 128M
pci0: <unknown card> (vendor=0x8086, dev=0x3582) at 2.1
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xe000-0xe01f irq
10 at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xe100-0xe11f irq
9 at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xe200-0xe21f irq
7 at device 29.2 on pci0
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 5
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on
pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x11ab, dev=0x4320) at 0.0 irq 11
pci2: <unknown card> (vendor=0x11ab, dev=0x4320) at 1.0 irq 15
isab0: <PCI to ISA bridge (vendor=8086 device=24cc)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 0 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ichsmb0: <Intel 82801DC (ICH4) SMBus controller> port 0x5000-0x501f irq 12
at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus general purpose I/O> on smbus0
pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 12
orm0: <Option ROMs> at iomem 0xd0000-0xd0fff,0xd1000-0xd1fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4
flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
accept, logging limited to 100 packets/entry by default
IPsec: Initialized Security Association Processing.
ad0: 38166MB <ST340014A> [77545/16/63] at ata0-master UDMA100 Mounting
root from ufs:/dev/ad0s1a
and if I do a kld load.
skc0: <Marvell Gigabit Ethernet> port 0xd000-0xd0ff mem
0xec040000-0xec043fff irq 11 at device 0.0 on pci2
skc0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
skc1: <Marvell Gigabit Ethernet> port 0xd100-0xd1ff mem
0xec044000-0xec047fff irq 15 at device 1.0 on pci2
skc1: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
sk0: Ethernet address: 00:01:80:5c:0c:cd
sk1: <Marvell Semiconductor, Inc. Yukon> on skc1
sk1: Ethernet address: 00:01:80:5c:0c:cc
miibus0: <MII bus> on sk0
e1000phy0: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus0
e1000phy0: 1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX,
auto
miibus1: <MII bus> on sk1
e1000phy1: <Marvell Semiconductor 88E1000* gigabit PHY> on miibus1
e1000phy1: 1000baseTX-FDX, 100baseTX-FDX, 100baseTX, 10baseTX-FDX, 10baseTX,
auto
Disabling ACPI doesnt make a difference either.
--------------------------------------------------------------------
Mike Tancsa, tel +1 519 651 3400
Sentex Communications, mike@sentex.net
Providing Internet since 1994 www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
_______________________________________________
freebsd-stable@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-stable
To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.0 - Release Date: 31/03/2005
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.0 - Release Date: 31/03/2005
Mike Tancsa
2005-Apr-01 11:00 UTC
RELENG_5 problems with Intel 855 (RELENG_4 boots fine) (solved!)
At 01:29 PM 01/04/2005, Gray Lilley wrote:>Can you try setting hw.pci.enable_io_modes=0 at the loader prompt then >booting?Thanks! That did the trick!! OK set hw.pci.enable_io_modes=0 OK boot /boot/kernel/acpi.ko text=0x41520 data=0x1da4+0x112c syms=[0x4+0x7630+0x4+0x9c97] KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.4-PRERELEASE #0: Fri Apr 1 09:06:22 EST 2005 mdtancsa@nfs.sentex.ca:/usr/obj/usr/src/sys/nfs ACPI APIC Table: <AOpen AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Celeron(R) M processor 1500MHz (1500.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x695 Stepping = 5 Features=0xa7e9fbbf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE> real memory = 534642688 (509 MB) avail memory = 513507328 (489 MB) ioapic0 <Version 2.0> irqs 0-23 on motherboard npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <AOpen AWRDACPI> on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 cpu0: <ACPI CPU (3 Cx states)> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: <base peripheral> at device 0.1 (no driver attached) pci0: <base peripheral> at device 0.3 (no driver attached) pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 agp0: <Intel 82855GME (855GME GMCH) SVGA controller> port 0xe300-0xe307 mem 0xed000000-0xed07ffff,0xe0000000-0xe7ffffff irq 16 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pci0: <display> at device 2.1 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci2: <ACPI PCI bus> on pcib2 puc0: <Lava Computers Quattro-PCI serial port> port 0xd300-0xd307,0xd200-0xd207 irq 16 at device 4.0 on pci2 sio4: <Lava Computers Quattro-PCI serial port> on puc0 sio4: type 16550A sio4: unable to activate interrupt in fast mode - using normal mode sio5: <Lava Computers Quattro-PCI serial port> on puc0 sio5: type 16550A sio5: unable to activate interrupt in fast mode - using normal mode puc1: <Lava Computers Quattro-PCI serial port> port 0xd500-0xd507,0xd400-0xd407 irq 16 at device 4.1 on pci2 sio6: <Lava Computers Quattro-PCI serial port> on puc1 sio6: type 16550A sio6: unable to activate interrupt in fast mode - using normal mode sio7: <Lava Computers Quattro-PCI serial port> on puc1 sio7: type 16550A sio7: unable to activate interrupt in fast mode - using normal mode pci2: <simple comms, UART> at device 5.0 (no driver attached) twe0: <3ware Storage Controller. Driver version 1.50.01.002> port 0xd700-0xd70f mem 0xec000000-0xec7fffff irq 18 at device 6.0 on pci2 twe0: 2 ports, Firmware FE7X 1.05.00.068, BIOS BE7X 1.08.00.048 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A, console sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ppc0: parallel port not found. Timecounter "TSC" frequency 1500059900 Hz quality 800 Timecounters tick every 10.000 msec ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging limited to 3100 packets/entry by default ad0: 38166MB <ST340014A/3.06> [77545/16/63] at ata0-master UDMA100 acd0: CDROM <CD-ROM 48X/AKU/T31> at ata1-master PIO4 twed0: <Unit 0, TwinStor, Normal> on twe0 twed0: 76318MB (156299440 sectors) Mounting root from ufs:/dev/ad0s1a Pre-seeding PRNG: kickstart. Loading configuration files. Entropy harvesting: interrupts ethernet point_to_point kickstart. kernel dumps on /dev/ad0s1b swapon: adding /dev/ad0s1b as swap device Starting file system checks: /dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1a: clean, 331086 free (990 frags, 41262 blocks, 0.2% fragmentation) /dev/ad0s1e: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1e: clean, 500291 free (203 frags, 62511 blocks, 0.0% fragmentation) /dev/ad0s1d: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1d: clean, 6260810 free (48418 frags, 776549 blocks, 0.6% fragmentation) /dev/ad0s1f: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/ad0s1f: clean, 9698700 free (252 frags, 1212306 blocks, 0.0% fragmentation) Setting hostname: nfs.sentex.ca. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet 127.0.0.1 netmask 0xff000000 Flushed all rules. 00100 allow ip from any to any via lo0 00200 deny ip from any to 127.0.0.0/8 00300 deny ip from 127.0.0.0/8 to any 65000 allow ip from any to any Firewall rules loaded, starting divert daemons:. Firewall logging enabled net.inet.ip.fw.enable: 1 -> 1 Additional routing options:. Starting devd. Mounting NFS file systems:. Starting syslogd. Apr 1 12:07:52 nfs syslogd: kernel boot file is /boot/kernel/kernel