Hello,
Hello,
I have FreeBSD 5.3-STABLE installed. Since I've installed a new 115200
Kbit/s modem and established ppp connection using kernel ppp, I
started recieving following messages:
sio0: 296 more interrupt-level buffer overflows (total 57038)
This message repeats almost every minute meaning serious malfunction
in the channel.
Bruce Evans <bde@zeta.org.au> wrote in
http://lists.freebsd.org/pipermail/freebsd-bugs/2003-May/000687.html
> Try changing this line in sio.c:
>
> cp4ticks = speed / 10 / hz * 4;
>
> to something like:
>
> cp4ticks = speed / 10 / hz * 40;
> or if you use a non-default value for hz (default is 100):
>
> cp4ticks = speed / 10 / 100 * 40;
the change to
cp4ticks = speed / 10 / hz * 40;
made my kernel panic every 20 minutes
I use ipfw with dummynet and have set following all recommendations
HZ=1000
in my kernel configuration. So, we have
cp4ticks = speed / 10 / 100 * 40 == speed / 10 / 1000 * 4
(what is the default, unchanged value) and must work properly
but due to unproper interrupt latency we have these overflows.
So, changing cp4ticks to
cp4ticks = speed / 10 / hz * 40; == speed / 10 / 1000 * 40
made my kernel panic.
##################################################
The worse thing is that when I returned sio.c to default, my kernel
never stopped panicing. This panic is definitely provoked by sio
device, as if I turn off my modem (or kill pppd) kernel doesn't panic.
##################################################
Here is some data that can help:
/etc/ppp/options:
/dev/cuaa1
115200
lock
modem
crtscts
---
/etc/ppp/options.cuaa1:
noauth
persist
call ukrtel
---
/etc/ppp/peers/ukrtel:
name ukrtel
defaultroute
ipcp-accept-local
ipcp-accept-remote
???.???.???.???:???.???.???.??? - my/peers adresses
connect /etc/ppp/peers/connect.inet # empty, 1 line - exit 0
---
I am bad debugger but I can provide some info extracted from my dump:
(kgdb) backtrace
#0 doadump () at pcpu.h:159
#1 0xc060b063 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:397
#2 0xc060b389 in panic (fmt=0xc080321d "spin lock held too long")
at /usr/src/sys/kern/kern_shutdown.c:553
#3 0xc060270c in _mtx_lock_spin (m=0xc08d7800, td=0xc19ca320, opts=0,
file=0x0, line=0) at /usr/src/sys/kern/kern_mutex.c:613
#4 0xc077c165 in siointr (arg=0xc1ab8800) at /usr/src/sys/dev/sio/sio.c:1710
#5 0xc0790ead in intr_execute_handlers (isrc=0xc19b8890, iframe=0xd541ac94)
at /usr/src/sys/i386/i386/intr_machdep.c:203
#6 0xc07932be in lapic_handle_intr (frame {if_vec = 52, if_fs =
-717160424, if_es = -1067384816, if_ds = 16, if_edi
= -1046699232, if_esi = -1064591424, if_ebp = -717116188, if_ebx = -1046425600,
if_edx = -1064566184, if_ecx = 0, if_eax = -1046425600, if_eip = -1067440569, if
_cs = 8, if_eflags = 582, if_esp = -1045200000, if_ss = 4})
at /usr/src/sys/i386/i386/local_apic.c:490
#7 0xc078d753 in Xapic_isr1 () at apic_vector.s:110
#8 0x00000034 in ?? ()
#9 0xd5410018 in ?? ()
#10 0xc0610010 in coredump (td=0xc08b9fc0) at vnode_if.h:1244
#11 0xc05f6f46 in ithread_loop (arg=0xc1981c80)
at /usr/src/sys/kern/kern_intr.c:546
#12 0xc05f6001 in fork_exit (callout=0xc05f6df8 <ithread_loop>,
arg=0xc1981c80, frame=0xd541ad48) at /usr/src/sys/kern/kern_fork.c:811
#13 0xc078d3fc in fork_trampoline () at /usr/src/sys/i386/i386/exception.s:209
(kgdb) list *0xc077c165
0xc077c165 is in siointr (/usr/src/sys/dev/sio/sio.c:1710).
1705
1706 #ifndef COM_MULTIPORT
1707 com = (struct com_s *)arg;
1708
1709 mtx_lock_spin(&sio_lock);
1710 siointr1(com);
1711 mtx_unlock_spin(&sio_lock);
1712 #else /* COM_MULTIPORT */
1713 bool_t possibly_more_intrs;
1714 int unit;
(kgdb) list *0xc060270c
0xc060270c is in _mtx_lock_spin (cpufunc.h:305).
300 }
301
302 static __inline void
303 ia32_pause(void)
304 {
305 __asm __volatile("pause");
306 }
307
308 static __inline u_int
309 read_eflags(void)
(kgdb) list *0xc060b389
0xc060b389 is at /usr/src/sys/kern/kern_shutdown.c:553.
548 mtx_lock_spin(&sched_lock);
549 td->td_flags |= TDF_INPANIC;
550 mtx_unlock_spin(&sched_lock);
551 if (!sync_on_panic)
552 bootopt |= RB_NOSYNC;
553 boot(bootopt);
554 }
555
556 /*
557 * Support for poweroff delay.
(kgdb) list *0xc07932be
0xc07932be is in lapic_handle_intr (/usr/src/sys/i386/i386/local_apic.c:491).
486
487 if (frame.if_vec == -1)
488 panic("Couldn't get vector from ISR!");
489 isrc = intr_lookup_source(apic_idt_to_irq(frame.if_vec));
490 intr_execute_handlers(isrc, &frame);
491 }
492
493 /* Translate between IDT vectors and IRQ vectors. */
494 u_int
495 apic_irq_to_idt(u_int irq)
---------
here is my dmesg:
ACPI APIC Table: <VIA694 AWRDACPI>
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) III CPU family 1133MHz (1132.80-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536805376 (511 MB)
avail memory = 515624960 (491 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VIA694 AWRDACPI> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
cpu1: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xf0000000-0xf3ffffff at device
0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <Promise PDC20267 UDMA100 controller> port
0xb000-0xb03f,0xac00-0xac03,0xa800-0xa807,0xa400-0xa403,0xa000-0xa007
mem 0xfb100000-0xfb11ffff irq 18 at device 12.0 on pci0
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb400-0xb43f mem
0xfb000000-0xfb0fffff,0xfb120000-0xfb120fff irq 19 at device
13.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:30:48:41:17:32
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <VIA 8233 UDMA100 controller> port
0xb800-0xb80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xbc00-0xbc1f irq 10 at device
17.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 10 at device
17.3 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device
17.4 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77b,0x378-0x37f irq 7 drq 3
on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
orm0: <ISA Option ROMs> at iomem 0xcc000-0xd3fff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
accept, logging limited to 300 packets/entry
by default
ad4: 57241MB <ST360021A/3.19> [116301/16/63] at ata2-master UDMA100
ad6: 57241MB <ST360021A/3.19> [116301/16/63] at ata3-master UDMA100
ar0: 57241MB <ATA RAID1 array> [7297/255/63] status: READY subdisks:
disk0 READY on ad4 at ata2-master
disk1 READY on ad6 at ata3-master
SMP: AP CPU #1 Launched!
--
Best regards,
Oleg Tarasov mailto:subscriber@osk.com.ua