freebsd stable - Mar 2005 - 5.3-R and D-Link DFE530TX cards

I just installed 5.3-R on a spare machine, which is equipped with a D-Link
DFE-530TX network card.
This is a "typical" Digital 21440A-based card which has worked fine
fine
under 4.x before.
In 5.3, it's shows up as a 'de' device, but I recall it being either
a 'dc'
or a 'vr' under 4.x.  Or maybe not.

Here's what "boot -v" shows (hand-transcribed):

de0: <Digital 21140A Fast Ethernet> port 0xe800-0xe87f mem
0xc9000000-0xc900007f irq 5 at device 9.0 in pci0
de0: Reserved 0x80 bytes for rid 0x10 type 4 at 0xe800
de0: can't read ENET ROM (why=-4) (7f7fef7f ..... )
de0: 21140A [10-100Mb/s] pass 2.2
de0: address unknown

Any ideas of what I can do to get this card working?  I am going cvsup
to -STABLE as soon as I can find another card that works.

--
Matt Emmerton

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On Mon, 28 Feb 2005 22:24:25 -0500, "Matt Emmerton"
<matt@gsicomp.on.ca>
wrote:
> I just installed 5.3-R on a spare machine, which is equipped with a D-Link
> DFE-530TX network card.
> This is a "typical" Digital 21440A-based card which has worked
fine fine
> under 4.x before.
Something misdetected your card, then. The DFE-530TX is via-rhine based
(vr0) - I should know, I have 3 boxen using them :)

The DFE-530TX+, however, is based on an RTL8139.

$ dmesg | grep vr0
vr0: <VIA VT3043 Rhine I 10/100BaseTX> port 0x1080-0x10ff mem
0xf0000000-0xf000007f irq 11 at device 14.0 on pci0
miibus0: <MII bus> on vr0
vr0: Ethernet address: 00:50:ba:df:6f:60

- -- 
G. Stewart - gstewart@bonivet.net

Everything that can be invented has been invented.
                -- Charles Duell, Director of U.S. Patent Office, 1899
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.0 (FreeBSD)

iD8DBQFCJDTQK5oiGLo9AcYRAoWoAJoDweO6I0nUqF2GWxk/Db4etAP7ZACeNO05
1eiLaSlkfYX6lECg3uFKEIg=T8CA
-----END PGP SIGNATURE-----