Hello to mailing list,
all problems are solved.
Good bye
Am Samstag, den 19.02.2005, 23:22 +0100 schrieb Juergen
Dankoweit:> Hello and good evening.
>
> Today I made an update of my FreeBSD-System with cvs as discribed in the
> manual.
> After this procedure I made some ugly experiences:
> (*) Using my compact-flash-reader (Siemens-Fujtsu) shows strange
> results:
>
> # mount -t msdos /dev/da14s1 /dist
> Result:
> ======> Feb 19 22:56:01 primergy470 kernel: umass0: Get Max Lun not
supported
> (STALLED)
> Feb 19 22:56:01 primergy470 kernel: da14 at umass-sim0 bus 0 target 0
> lun 0
> Feb 19 22:56:01 primergy470 kernel: da14: < > Removable Direct
Access
> SCSI-2 device
> Feb 19 22:56:01 primergy470 kernel: da14: 1.000MB/s transfers
> Feb 19 22:56:01 primergy470 kernel: da14: 122MB (250369 512 byte
> sectors: 64H 32S/T 122C)
>
> # umount /dist
> Result:
> ======> Feb 19 22:57:55 primergy470 kernel: umass0: BBB reset failed,
TIMEOUT
> Feb 19 22:57:55 primergy470 kernel: umass0: BBB bulk-in clear stall
> failed, STALLED
> Feb 19 22:57:55 primergy470 kernel: umass0: BBB bulk-out clear stall
> failed, STALLED
> This was shown in /var/log/messages about twenty times
> (*) Connecting my DigiKam (Canon Powershot G2) and identifying it is no
> problem: it is shown as ugen0-device.
> But when gphoto2 is started (gphoto2 --auto-detect -P) the system hangs
> and after two minutes it reboots.
> (*) X.ORG 6.8.1 needs about 20% of CPU-capacity, with only one(!!!!)
> open Gnome-Terminal. Before system update it was only 5% (under FreeBSD
> 4.10 it needs 1%, it is a P2-266MHz notebook!!!!)
> (*) mplayer core dumps with signal 11
> (*) opening windows on Gnome-Desktop is very slow and needs about 10
> seconds.
>
> Here is the output from uname -a
> FreeBSD primergy470.juergendankoweit.net 5.3-STABLE FreeBSD 5.3-STABLE
> #1: Sat Feb 19 18:19:23 CET 2005
> juergen@primergy470.juergendankoweit.net:/usr/obj/usr/src/sys/PRIMERGY470
i386
> It is a dual processor machine with 2 x 450MHz P3 and 2GB RAM.
>
> What is wrong with the new update? Is it better to change to FBSD 4.11?
>
> Many thanks for your advice.
>
> Best regards
>
> J?rgen
>
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
"freebsd-stable-unsubscribe@freebsd.org"