Marwan Burelle
2005-Feb-10 08:23 UTC
[5-STABLE] : CDRW burning problem - acd0: FAILURE - READ_BIG ILLEGAL REQUEST
Hi,
I have a CDRW burner that use to work (with 5.2.1 the last time.)
But since one of my last RELENG_5_2 update I encounter errors when
burning CDRW (I don't have CDR to test, but I rember having strange
behaviour with CDR also.) Switching to RELENG-5 (re-install 5.3 and
cvsup after) a week ago doesn't change anything.
burncd dies with message :
[root@pc5-179 17:05 FreeBSD-5.3]# burncd -e -v -f /dev/acd0 data
5.3-RELEASE-i386-disc1.iso fixate
adding type 0x08 file 5.3-RELEASE-i386-disc1.iso size 660384 KB 330192 blocks
burncd: ioctl(CDRIOCNEXTWRITEABLEADDR): Input/output error
($status : 74)
And I have those messages in my log :
kernel: acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
error=4<ABORTED>
kernel: acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
last message repeated 3 times
I have tried with cdrecord and atapicam, but again it fails with
message :
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
Cdrecord-Clone 2.01 (i386-unknown-freebsd5.3) Copyright (C) 1995-2004 J?rg
Schilling
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Using libscg version 'schily-0.8'.
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'RW/DVD GCC-4481B'
Revision : 'C103'
Device seems to be: Generic mmc2 DVD-ROM.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
cdrecord: Drive needs to reload the media to return to proper status.
cdrecord: Cannot get next writable address for 'invisible' track.
cdrecord: This means that we are checking recorded media.
cdrecord: This media cannot be written in streaming mode anymore.
cdrecord: If you like to write to 'preformatted' RW media, try to blank
the media first.
Starting to write CD/DVD at speed 10 in real TAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Turning BURN-Free off
cdrecord: Input/output error. read track info: scsi sendcmd: retryable error
CDB: 52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 240s
cdrecord: Cannot get next writable address for 'invisible' track.
cdrecord: This means that we are checking recorded media.
cdrecord: This media cannot be written in streaming mode anymore.
cdrecord: If you like to write to 'preformatted' RW media, try to blank
the media first.
cdrecord: Cannot get next writable address.
Of course, I have erased and blanked the CDRW before (with burncd and
without any error ... )
I have no READ_BIG error in my log with cdrecord.
I tried to switch drive in PIO4 or UDMA33, the result is the same ...
I saw PR 75875, but it is still open and I have no mounting/reading problem.
My kernel is a Generic without some adaptors, with atapicam and some
color for the console, but I've got the same problem with a generic
kernel.
Here my dmesg :
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #0: Fri Feb 4 18:45:33 CET 2005
root@:/usr/home/obj/usr/src/sys/KER_pc5-179
MPTable: <DELL WS 360 >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 1073168384 (1023 MB)
avail memory = 1036431360 (988 MB)
ioapic0: Changing APIC ID to 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82875P host to AGP bridge> mem 0xe8000000-0xefffffff at
device 0.0 on pci0
pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
nvidia0: <Quadro FX 500/600 PCI> mem
0xf0000000-0xf7ffffff,0xfd000000-0xfdffffff irq 16 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq
16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq
19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq
18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhub3: Cypress Semiconductor Slim Hub, class 9/0, rev 2.00/0.08, addr 2
uhub3: 4 ports with 4 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq
16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port
0xdf40-0xdf7f mem 0xfcfe0000-0xfcffffff irq 18 at device 12.0 on pci2
em0: Ethernet address: 00:0c:f1:cc:4e:da
em0: Speed:N/A Duplex:N/A
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 18 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xfea0-0xfeaf,0xfe30-0xfe33,0xfe20-0xfe27,0xfe10-0xfe13,0xfe00-0xfe07 irq 18 at
device 31.2 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH5 (82801EB)> port 0xedc0-0xedff,0xee00-0xeeff mem
0xfebff900-0xfebff9ff,0xfebffa00-0xfebffbff irq 17 at device 31.5 on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1980 AC97 Codec>
cpu0 on motherboard
orm0: <ISA Option ROMs> at iomem
0xd1000-0xd3fff,0xcf800-0xd0fff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0f13> can't assign resources (irq)
unknown: <PNP0303> can't assign resources (port)
Timecounter "TSC" frequency 3192017656 Hz quality 800
Timecounters tick every 1.000 msec
em0: Link is up 100 Mbps Full Duplex
ad0: 76293MB <Maxtor 6Y080L0/YAR41BW0> [155009/16/63] at ata0-master
UDMA100
acd0: CDRW <HL-DT-ST RW/DVD GCC-4481B/C103> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HL-DT-ST RW/DVD GCC-4481B C103> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Mounting root from ufs:/dev/ad0s1a
em0: Link is up 100 Mbps Full Duplex
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
cd9660: RockRidge Extension
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_BIG ILLEGAL REQUEST asc=0x64 ascq=0x00
error=4<ABORTED>
acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00
error=4<ABORTED>
--
Burelle Marwan,
Equipe Bases de Donnees - LRI
http://www.cduce.org
(burelle@lri.fr | Marwan.Burelle@ens.fr)
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20050210/5d4b87d3/attachment.bin
Scott Robbins
2005-Feb-10 08:30 UTC
[5-STABLE] : CDRW burning problem - acd0: FAILURE - READ_BIG ILLEGAL REQUEST
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Thu, Feb 10, 2005 at 05:23:46PM +0100, Marwan Burelle wrote:> Hi, > > I have a CDRW burner that use to work (with 5.2.1 the last time.) > > But since one of my last RELENG_5_2 update I encounter errors when > burning CDRW (I don't have CDR to test, but I rember having strange > behaviour with CDR also.) Switching to RELENG-5 (re-install 5.3 and > cvsup after) a week ago doesn't change anything. > > burncd dies with message : > > [root@pc5-179 17:05 FreeBSD-5.3]# burncd -e -v -f /dev/acd0 data 5.3-RELEASE-i386-disc1.iso fixate > adding type 0x08 file 5.3-RELEASE-i386-disc1.iso size 660384 KB 330192 blocks > burncd: ioctl(CDRIOCNEXTWRITEABLEADDR): Input/output errorI get the same error on two machines, did some googling and found no answers that helped. (I fear I don't remember the details now.) As I don't have the error on another machine (all running 5.3 STABLE) I figured it was something to do with the CD drive, a Plexor. However, in my case at least, the burn is successful. It does it's thing, gives me that error message, I wait a few moments, eject the CD and it is a good one. - -- Scott GPG KeyID EB3467D6 ( 1B848 077D 66F6 9DB0 FDC2 A409 FA54 D575 EB34 67D6) gpg --keyserver pgp.mit.edu --recv-keys EB3467D6 Xander: I can not stress enough how much I don't have plans. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.0 (FreeBSD) iD8DBQFCC4wD+lTVdes0Z9YRAgaTAJ9/QU1OXOZo3JcZ5q507fFdLRIRfwCfdNv0 nDfbCDo5226vzqy5T/aynW0=Ci8W -----END PGP SIGNATURE-----