I have been unable to get sound to work on my Dell Inspiron 4000
under FreeBSD 5.3. Until last Tuesday I was running 4-STABLE, under which
sound would work, but only after I had put the computer to sleep (zzz),
and then brought it back up. Before that, any attempt to play sound
resulted in an application that thought it was playing sound, but no
actual audio emanations from the laptop.
Under 5.3, I have the snd_maestro3_load="YES" in my loader.conf,
and a kldstat confirms that maestro3 and its attendant modules are indeed
loaded and seem to be functioning. Here's an output of /dev/sndstat:
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <ESS Technology Maestro3> at io 0xd800 irq 5 kld snd_maestro3
(4p/1r/0v channels duplex default)
I have tried the same sleep trick that worked in 4-STABLE to
recover sound usage, but it does not work in this case, even though the
computer's sleep and recovery therefrom seem normal. When the computer
first boots, it emits a loud beep, implying that the sound *is* working at
initial bootup, but must be messed up later in the boot process.
I have become quite exasperated with this problem. I was
wondering if any of you out there in mailing-list-land might have
encountered a similar problem, or have any ideas as to what I might try to
fix my issue. For reference I have included a copy of dmesg below my
signature.
Thanks in advance for any help you might have,
- Jason Barnes
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE #1: Sun Nov 28 00:18:14 MST 2004
jbarnes@tc14.barnesos.net:/usr/src/sys/i386/compile/tc14.2004.Nov.25
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (701.59-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 268353536 (255 MB)
avail memory = 252932096 (241 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL CPi R > on motherboard
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_cmbat1: <Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xf4000000-0xf7ffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1420 PCI-CardBus Bridge> at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1420 PCI-CardBus Bridge> at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port
0x860-0x86f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xdce0-0xdcff irq 11
at device 7.2 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pcm0: <ESS Technology Maestro3> port 0xd800-0xd8ff mem
0xf3ffe000-0xf3ffffff irq 5 at device 8.0 on pci0
pcm0: failed: rid 0x10 is ioport, requested 3
pcm0: [GIANT-LOCKED]
pcm0: <SigmaTel STAC9721/23 AC97 Codec>
pci0: <simple comms> at device 16.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2
on acpi0
fdc0: [FAST]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 701593381 Hz quality 800
Timecounters tick every 10.000 msec
ndis0: <Wireless-G Notebook Adapter> mem 0x88000000-0x88001fff irq 11 at
device 0.0 on cardbus1
ndis0: NDIS API version: 5.0
ndis0: Ethernet address: 00:0f:66:45:6a:23
ndis0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ndis0: 11g rates: 6Mbps 9Mbps 12Mbps 18Mbps 36Mbps 48Mbps 54Mbps
ad0: 9590MB <IBM-DJSA-210/JS2OAB8A> [19485/16/63] at ata0-master UDMA33
acd0: DVDROM <TOSHIBA DVD-ROM SD-C2402/1015> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
ndis0: link up