I would risk the upgrade to 5.3. What can you lose? It is crashing
frequently already... 5.2.1 was not a stable release officially. Just make
sure that you follow the migration guide step by step
(http://www.freebsd.org/releases/5.3R/migration-guide.html). Do not skip
mergemaster. And you must recompile all installed binaries after the
upgrade, including all installed ports.
Zoltan
> Hi,
>
> I've been asked to help this former customer.
> This box is running 5.2.1 with as most "exotic" application
jave/tomcat.
> And
> it crashes too often. The first essential question for the customer is: Is
> this hardware??? So I did the 'make -j 8 buildworld' test, which it
> survived
> with flying colors.
>
> What do I find in the logs:
> Nov 12 11:22:01 ktc syslogd: kernel boot file is /boot/kernel/kernel
> Nov 12 11:22:01 ktc kernel: panic: vm_fault: fault on nofault entry, addr:
> ee8fd000
> Nov 12 11:22:01 ktc kernel:
> Nov 12 11:22:01 ktc kernel: syncing disks, buffers remaining... panic:
> bremfree: removing a buffer not on a queue
> Nov 12 11:22:01 ktc kernel: Uptime: 2d11h12m6s
> Nov 12 11:22:01 ktc kernel: Shutting down ACPI
> Nov 12 11:22:01 ktc kernel: Automatic reboot in 15 seconds - press a key
> on
> the console to abort
> ......
> Nov 12 11:22:02 ktc kernel: WARNING: / was not properly dismounted
> Nov 12 11:53:54 ktc syslogd: kernel boot file is /boot/kernel/kernel
> Nov 12 11:53:54 ktc kernel: panic: vm_fault: fault on nofault entry, addr:
> ee79f000
> Nov 12 11:53:54 ktc kernel:
> Nov 12 11:53:54 ktc kernel: syncing disks, buffers remaining... panic:
> bremfree: removing a buffer not on a queue
> Nov 12 11:53:54 ktc kernel: Uptime: 31m36s
> Nov 12 11:53:54 ktc kernel: Shutting down ACPI
>
> Now the panic in the syncing part, I can imagine to just be there since
> syncing disk after a panic has not really worked all that well in 5.x
>
> Customer has disabled all warnings/witness/.....
>
> And I can not make much of the comments on sys/vm/vm_fault.c:278, which is
> where the fault on nofault occurs...
>
> My feeling says: upgrade to 5.3, but this being a production server
> running
> soem applications I know very little off holds me back.
>
> So is this for sure a hardware problem, or just leftovers from 5.2.1????
>
> --WjW
>
>
> -------- Original Message --------
> Date: Tue, 16 Nov 2004 20:57:26 +0100 (CET)
> From: Jan Willem <wjw at ktc.netmaniacs.nl>
> To: wjw at withagen.nl
>
> 3.78.225.127:138 193.78.225.255:138 in via fxp0
> TPTE at 0xbfc203e4 IS ZERO @ VA 080f9000
> panic: bad pte
>
> syncing disks, buffers remaining... panic: bremfree: removing a buffer not
> on
> a queue
> Uptime: 6h59m22s
> Shutting down ACPI
> Automatic reboot in 15 seconds - press a key on the console to abort
> Rebooting...
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.2.1-RELEASE-p9 #4: Tue Aug 24 01:16:22 CEST 2004
> joao at ktc.netmaniacs.nl:/usr/src/sys/i386/compile/KTC
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc09ee000.
> Preloaded elf module "/boot/kernel/aout.ko" at 0xc09ee26c.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc09ee318.
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3192.22-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
>
>
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> Hyperthreading: 2 logical CPUs
> real memory = 2129850368 (2031 MB)
> avail memory = 2063503360 (1967 MB)
> Pentium Pro MTRR support enabled
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <INTEL D865GLC > on motherboard
> pcibios: BIOS version 2.10
> Using $PIR table, 12 entries at 0xc00f3d20
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_cpu0: <CPU> on acpi0
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib0: slot 2 INTA is routed to irq 11
> pcib0: slot 29 INTA is routed to irq 11
> pcib0: slot 29 INTB is routed to irq 5
> pcib0: slot 29 INTC is routed to irq 10
> pcib0: slot 29 INTA is routed to irq 11
> pcib0: slot 29 INTD is routed to irq 9
> pcib0: slot 31 INTA is routed to irq 10
> pcib0: slot 31 INTB is routed to irq 3
> agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xec00-0xec07
mem
> 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0 on pci0
> agp0: detected 16252k stolen memory
> agp0: aperture size is 128M
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc800-0xc81f
irq
> 11
> at device 29.0 on pci0
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f
irq
> 5 at
> device 29.1 on pci0
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd000-0xd01f
irq
> 10
> at device 29.2 on pci0
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd400-0xd41f
irq
> 11
> at device 29.3 on pci0
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> pci0: <serial bus, USB> at device 29.7 (no driver attached)
> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pcib1: slot 0 INTA is routed to irq 10
> pcib1: slot 1 INTA is routed to irq 10
> pcib1: slot 8 INTA is routed to irq 11
> pcib2: <PCI-PCI bridge> at device 0.0 on pci1
> pci2: <PCI bus> on pcib2
> asr0: <Adaptec Caching SCSI RAID> mem 0xe4000000-0xe5ffffff irq 10 at
> device
> 0.1 on pci1
> asr0: major=154
> asr0: ADAPTEC 2100S FW Rev. 370F, 1 channel, 256 CCBs, Protocol I2O
> xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xbc00-0xbc7f mem
> 0xff8efc00-0xff8efc7f irq 10 at device 1.0 on pci1
> xl0: Ethernet address: 00:04:76:f6:e1:1c
> miibus0: <MII bus> on xl0
> xlphy0: <3Com internal media interface> on miibus0
> xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp0: <Intel 82801BA (D865) Pro/100 VE Ethernet> port 0xb800-0xb83f
mem
> 0xff8ee000-0xff8eefff irq 11 at device 8.0 on pci1
> fxp0: Ethernet address 00:0c:f1:91:52:7b
> miibus1: <MII bus> on fxp0
> inphy0: <i82562ET 10/100 media interface> on miibus1
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port
> 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata0: [MPSAFE]
> ata1: at 0x170 irq 15 on atapci0
> ata1: [MPSAFE]
> atapci1: <Intel ICH5 SATA150 controller> port
> 0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807 irq
> 10
> at device 31.2 on pci0
> atapci1: [MPSAFE]
> ata2: at 0xe800 on atapci1
> ata2: [MPSAFE]
> ata3: at 0xe000 on atapci1
> ata3: [MPSAFE]
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> acpi_button0: <Sleep Button> on acpi0
> fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
> 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> sio0: configured irq 4 not in bitmap of probed irqs 0
> sio0: port may not be enabled
> sio0 port 0x3f8-0x3ff irq 4 on acpi0
> sio0: type 16550A
> ppc0 port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> acpi_cpu1: <CPU> on acpi0
> device_probe_and_attach: acpi_cpu1 attach returned 6
> orm0: <Option ROMs> at iomem 0xca000-0xcffff,0xc0000-0xc9fff on isa0
> pmtimer0 on isa0
> atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> Timecounter "TSC" frequency 3192222428 Hz quality 800
> Timecounters tick every 10.000 msec
> ipfw2 initialized, divert enabled, rule-based forwarding enabled, default
> to
> deny, logging unlimited
> acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
> acd0: CDROM <LTN526S> at ata1-master PIO4
> GEOM: create disk da0 dp=0xc869b050
> da0 at asr0 bus 0 target 0 lun 0
> da0: <ADAPTEC 1POINT-ADVISE 370F> Fixed Direct Access SCSI-2 device
> da0: Tagged Queueing Enabled
> da0: 70007MB (143374336 512 byte sectors: 255H 63S/T 8924C)
> Mounting root from ufs:/dev/da0s1a
> WARNING: / was not properly dismounted
> WARNING: /usr was not properly dismounted
> /usr: superblock summary recomputed