David E. Cross
2004-Aug-31 11:35 UTC
READ_DMA interrupt was seen but timeout fired LBA=####
I searched the mailing list an didn't see anything listed for August, so I
thought I would write.
Upon switching to 5.3-BETA2 I see these a LOT on my IBM TP T30. In fact
BETA2 panics shortly after boot, and once in DDB I can't actually do
anything ('panic' doesn't work, 'call boot(0)' doesn't
work, eventually
DDB itself just locks). Upgrading to RELENG_5 makes it a bit better, I
still see oodles of those messages and WRITE_DMA messages also, but it
doesn't panic. Eventually everything will lock behind "ufs" in a
wait
channel. Booting to single-user seems to make it better (I can run
commands, etc and not get stuck in [ufs]). ACPI doesn't seem to make a
difference. Also, the GENERIC on the CD loader doesn't seem to exhibit
any of these problems. Below is a copy of my DMESG; ideas? Any
additional information required?
Aug 30 23:13:44 syslogd: kernel boot file is /boot/kernel/kernel
Aug 30 23:13:44 kernel: Copyright (c) 1992-2004 The FreeBSD Project.
Aug 30 23:13:44 kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
Aug 30 23:13:44 kernel: The Regents of the University of California. All
rights reserved.
Aug 30 23:13:44 kernel: FreeBSD 5.3-BETA2 #1: Sat Aug 28 21:29:15 UTC
2004
Aug 30 23:13:44 kernel:
root@mack.dcsl.buffalo.edu:/usr/obj/usr/src/sys/GENERICAug 30 23:13:44
kernel: WARNING: WITNESS option enabled, expect reduced performance.
Aug 30 23:13:44 kernel: Timecounter "i8254" frequency 1193182 Hz
quality
0
Aug 30 23:13:44 kernel: CPU: Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz
(1998.31-MHz 686-class CPU)
Aug 30 23:13:44 kernel: Origin = "GenuineIntel" Id = 0xf27 Stepping
= 7
Aug 30 23:13:44 kernel:
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Aug 30 23:13:44 kernel: real memory = 267780096 (255 MB)
Aug 30 23:13:44 kernel: avail memory = 252379136 (240 MB)
Aug 30 23:13:44 kernel: npx0: [FAST]
Aug 30 23:13:44 kernel: npx0: <math processor> on motherboard
Aug 30 23:13:44 kernel: npx0: INT 16 interface
Aug 30 23:13:44 kernel: acpi0: <IBM TP-1I> on motherboard
Aug 30 23:13:44 kernel: acpi_ec_ecdt_probe: can't get handle
Aug 30 23:13:44 kernel: ACPI-0358: *** Error: Region EmbeddedControl(3)
has no
handler
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.FDC_._INI] (Node 0xc15e6420), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0358: *** Error: Region EmbeddedControl(3)
has no
handler
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__._INI] (Node 0xc15dab00), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0358: *** Error: Region EmbeddedControl(3)
has no
handler
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc15dc6a0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0239: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BAT0._STA] (Node 0xc15dc6a0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0358: *** Error: Region EmbeddedControl(3)
has no
handler
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc15dc520), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0239: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BAT1._STA] (Node 0xc15dc520), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0358: *** Error: Region EmbeddedControl(3)
has no
handler
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc15e6560), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc15e6580), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc15e65c0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc15e6480), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0239: *** Error: Method execution failed
[\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node 0xc15e6480), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0358: *** Error: Region EmbeddedControl(3)
has no
handler
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc15e6560), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc15e6580), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc15e65c0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc15e26e0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0239: *** Error: Method execution failed
[\_SB_.PCI0.USB0.URTH.UNST._STA] (Node 0xc15e26e0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0358: *** Error: Region EmbeddedControl(3)
has no
handler
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BGID] (Node 0xc15e6560), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BINI] (Node 0xc15e6580), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.PCI0.LPC_.EC__.BSTA] (Node 0xc15e65c0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-1303: *** Error: Method execution failed
[\_SB_.NEST._STA] (Node 0xc15e62e0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: ACPI-0239: *** Error: Method execution failed
[\_SB_.NEST._STA] (Node 0xc15e62e0), AE_NOT_EXIST
Aug 30 23:13:44 kernel: acpi0: Power Button (fixed)
Aug 30 23:13:44 kernel: acpi_ec0: <Embedded Controller: GPE 0x1c> port
0x66,0x62 on acpi0
Aug 30 23:13:44 kernel: Timecounter "ACPI-fast" frequency 3579545 Hz
quality 1000
Aug 30 23:13:44 kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port
0x1008-0x100b on acpi0
Aug 30 23:13:44 kernel: cpu0: <ACPI CPU (3 Cx states)> on acpi0
Aug 30 23:13:44 kernel: acpi_tz0: <Thermal Zone> on acpi0
Aug 30 23:13:44 kernel: acpi_lid0: <Control Method Lid Switch> on acpi0
Aug 30 23:13:44 kernel: acpi_button0: <Sleep Button> on acpi0
Aug 30 23:13:44 kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
Aug 30 23:13:44 kernel: acpi link get: empty IRQ resource
Aug 30 23:13:44 kernel: pci0: <ACPI PCI bus> on pcib0
Aug 30 23:13:44 kernel: agp0: <Intel 82845 host to AGP bridge> mem
0xe0000000-0xe3ffffff at device 0.0 on pci0
Aug 30 23:13:44 kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on
pci0
Aug 30 23:13:44 kernel: pci1: <ACPI PCI bus> on pcib1
Aug 30 23:13:44 kernel: pci1: <display, VGA> at device 0.0 (no driver
attached)Aug 30 23:13:44 kernel: uhci0: <Intel 82801CA/CAM (ICH3) USB
controller USB-A>
port 0x1800-0x181f irq 11 at device 29.0 on pci0
Aug 30 23:13:44 kernel: uhci0: [GIANT-LOCKED]
Aug 30 23:13:44 kernel: usb0: <Intel 82801CA/CAM (ICH3) USB controller
USB-A> on uhci0
Aug 30 23:13:44 kernel: usb0: USB revision 1.0
Aug 30 23:13:44 kernel: uhub0: Intel UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
Aug 30 23:13:44 kernel: uhub0: 2 ports with 2 removable, self powered
Aug 30 23:13:44 kernel: uhci1: <Intel 82801CA/CAM (ICH3) USB controller
USB-B>
port 0x1820-0x183f irq 11 at device 29.1 on pci0
Aug 30 23:13:44 kernel: uhci1: [GIANT-LOCKED]
Aug 30 23:13:44 kernel: usb1: <Intel 82801CA/CAM (ICH3) USB controller
USB-B> on uhci1
Aug 30 23:13:44 kernel: usb1: USB revision 1.0
Aug 30 23:13:44 kernel: uhub1: Intel UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
Aug 30 23:13:44 kernel: uhub1: 2 ports with 2 removable, self powered
Aug 30 23:13:44 kernel: uhci2: <Intel 82801CA/CAM (ICH3) USB controller
USB-C>
port 0x1840-0x185f irq 11 at device 29.2 on pci0
Aug 30 23:13:44 kernel: uhci2: [GIANT-LOCKED]
Aug 30 23:13:44 kernel: usb2: <Intel 82801CA/CAM (ICH3) USB controller
USB-C> on uhci2
Aug 30 23:13:44 kernel: usb2: USB revision 1.0
Aug 30 23:13:44 kernel: uhub2: Intel UHCI root hub, class 9/0, rev
1.00/1.00, addr 1
Aug 30 23:13:44 kernel: uhub2: 2 ports with 2 removable, self powered
Aug 30 23:13:44 kernel: pcib2: <ACPI PCI-PCI bridge> at device 30.0 on
pci0
Aug 30 23:13:44 kernel: pci2: <ACPI PCI bus> on pcib2
Aug 30 23:13:44 kernel: cbb0: <TI1520 PCI-CardBus Bridge> mem
0x50000000-0x50000fff irq 11 at device 0.0 on pci2
Aug 30 23:13:44 kernel: cardbus0: <CardBus bus> on cbb0
Aug 30 23:13:44 kernel: pccard0: <16-bit PCCard bus> on cbb0
Aug 30 23:13:44 kernel: cbb1: <TI1520 PCI-CardBus Bridge> mem
0x51000000-0x51000fff irq 5 at device 0.1 on pci2
Aug 30 23:13:44 kernel: cardbus1: <CardBus bus> on cbb1
Aug 30 23:13:44 kernel: pccard1: <16-bit PCCard bus> on cbb1
Aug 30 23:13:44 kernel: wi0: <Intersil Prism2.5> mem
0xf8000000-0xf8000fff irq
11 at device 2.0 on pci2
Aug 30 23:13:44 kernel: wi0: [GIANT-LOCKED]
Aug 30 23:13:44 kernel: wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
Aug 30 23:13:44 kernel: wi0: Intersil Firmware: Primary (1.1.0), Station
(1.4.9)
Aug 30 23:13:44 kernel: wi0: Ethernet address: 00:05:3c:04:7a:fc
Aug 30 23:13:44 kernel: wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
Aug 30 23:13:44 kernel: fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet>
port
0x8000-0x803f mem 0xd0200000-0xd0200fff irq 10 at device 8.0 on pci2
Aug 30 23:13:44 kernel: miibus0: <MII bus> on fxp0
Aug 30 23:13:44 kernel: inphy0: <i82562ET 10/100 media interface> on
miibus0
Aug 30 23:13:44 kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
Aug 30 23:13:44 kernel: fxp0: Ethernet address: 00:09:6b:02:99:7f
Aug 30 23:13:44 kernel: fxp0: [GIANT-LOCKED]
Aug 30 23:13:44 kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Aug 30 23:13:44 kernel: isa0: <ISA bus> on isab0
Aug 30 23:13:44 kernel: atapci0: <Intel ICH3 UDMA100 controller> port
0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
Aug 30 23:13:44 kernel: ata0: channel #0 on atapci0
Aug 30 23:13:44 kernel: ata1: channel #1 on atapci0
Aug 30 23:13:44 kernel: pci0: <serial bus, SMBus> at device 31.3 (no
driver attached)
Aug 30 23:13:44 kernel: pci0: <multimedia, audio> at device 31.5 (no
driver attached)
Aug 30 23:13:44 kernel: pci0: <simple comms> at device 31.6 (no driver
attached)
Aug 30 23:13:44 kernel: atkbdc0: <Keyboard controller (i8042)> port
0x64,0x60 irq 1 on acpi0
Aug 30 23:13:44 kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
Aug 30 23:13:44 kernel: kbd0 at atkbd0
Aug 30 23:13:44 kernel: atkbd0: [GIANT-LOCKED]
Aug 30 23:13:44 kernel: psm0: <PS/2 Mouse> irq 12 on atkbdc0
Aug 30 23:13:44 kernel: psm0: [GIANT-LOCKED]
Aug 30 23:13:44 kernel: psm0: model Generic PS/2 mouse, device ID 0
Aug 30 23:13:44 kernel: fdc0: <floppy drive controller (FDE)> port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
Aug 30 23:13:44 kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Aug 30 23:13:44 kernel: sio0: type 16550A
Aug 30 23:13:44 kernel: ppc0 port 0x3bc-0x3be irq 7 on acpi0
Aug 30 23:13:44 kernel: ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE
mode
Aug 30 23:13:44 kernel: ppbus0: <Parallel port bus> on ppc0
Aug 30 23:13:44 kernel: plip0: <PLIP network interface> on ppbus0
Aug 30 23:13:44 kernel: lpt0: <Printer> on ppbus0
Aug 30 23:13:44 kernel: lpt0: Interrupt-driven port
Aug 30 23:13:44 kernel: ppi0: <Parallel I/O> on ppbus0
Aug 30 23:13:44 kernel: sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0
Aug 30 23:13:44 kernel: sio1: type 16550A
Aug 30 23:13:44 kernel: acpi_cmbat0: <Control Method Battery> on acpi0
Aug 30 23:13:44 kernel: acpi_acad0: <AC Adapter> on acpi0
Aug 30 23:13:44 kernel: orm0: <ISA Option ROMs> at iomem
0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff on isa0
Aug 30 23:13:44 kernel: pmtimer0 on isa0
Aug 30 23:13:44 kernel: sc0: <System console> at flags 0x100 on isa0
Aug 30 23:13:44 kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Aug 30 23:13:44 kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Aug 30 23:13:44 kernel: Timecounter "TSC" frequency 1998312320 Hz
quality
800
Aug 30 23:13:44 kernel: Timecounters tick every 10.000 msec
Aug 30 23:13:44 kernel: acpi_cpu: throttling enabled, 8 steps (100% to
12.5%),
currently 100.0%
Aug 30 23:13:44 kernel: ad0: 38154MB <IC25N040ATCS05-0/CS4OA61A>
[77520/16/63]
at ata0-master UDMA100
Aug 30 23:13:44 kernel: ATAPI_RESET time = 170us
Aug 30 23:13:44 kernel: ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
Aug 30 23:13:44 kernel: ATAPI_RESET time = 330us
Aug 30 23:13:44 kernel: acd0: CDRW <UJDA730 DVD/CDRW/1.04> at ata1-master
UDMA33
Aug 30 23:13:44 kernel: Mounting root from ufs:/dev/ad0s3a
Aug 30 23:13:45 kernel: ad0: WARNING - READ_DMA interrupt was seen but
timeout
--
David E. Cross
On Tue, 2004-08-31 at 20:35, David E. Cross wrote:> I searched the mailing list an didn't see anything listed for August, so I > thought I would write. > > Upon switching to 5.3-BETA2 I see these a LOT on my IBM TP T30. In fact > BETA2 panics shortly after boot, and once in DDB I can't actually do > anything ('panic' doesn't work, 'call boot(0)' doesn't work, eventually > DDB itself just locks). Upgrading to RELENG_5 makes it a bit better, I > still see oodles of those messages and WRITE_DMA messages also, but it > doesn't panic. Eventually everything will lock behind "ufs" in a wait > channel. Booting to single-user seems to make it better (I can run > commands, etc and not get stuck in [ufs]). ACPI doesn't seem to make a > difference. Also, the GENERIC on the CD loader doesn't seem to exhibit > any of these problems. Below is a copy of my DMESG; ideas? Any > additional information required?>I have a similar crash on 5.3-BETA2, it only happens on custom kernels, GENERIC runs fine. I have a crashdump with debugging kernel which I can make available if it would be useful. In any case I am including the backtrace and my system information. My system sources are all up to date except for sys/vm/uma_core.c which is version 1.104 rather than 1.105. I will try again with the newer version later tonight. My machine is a Sony VAIO PCG-NV105 or alternatively a PCG-9D7M depending on which label you look at. -------------------------------------------------------------------------- FreeBSD ceylonica 5.3-BETA2 FreeBSD 5.3-BETA2 #0: Sun Aug 29 19:19:56 CEST 2004 root@ceylonica:/usr/obj/usr/src/sys/GENERIC i386 -------------------------------------------------------------------------- _initialize_thread_db: can not load libthread_db.so. GNU gdb 6.1.1 [FreeBSD] Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-marcel-freebsd". doadump () at pcpu.h:159 (kgdb) where #0 doadump () at pcpu.h:159 #1 0xc056a022 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:396 #2 0xc056a410 in panic (fmt=0xc07029d5 "from debugger") at /usr/src/sys/kern/kern_shutdown.c:558 #3 0xc0452472 in db_panic (addr=-1067945888, have_addr=0, count=-1, modif=0xcbcf09b0 "") at /usr/src/sys/ddb/db_command.c:435 #4 0xc04523e2 in db_command (last_cmdp=0xc0777c84, cmd_table=0x0, aux_cmd_tablep=0xc073ce64, aux_cmd_tablep_end=0xc073ce68) at /usr/src/sys/ddb/db_command.c:349 #5 0xc04524f5 in db_command_loop () at /usr/src/sys/ddb/db_command.c:455 #6 0xc0454605 in db_trap (type=3, code=0) at /usr/src/sys/ddb/db_main.c:221 #7 0xc058738e in kdb_trap (type=0, code=0, tf=0x1) at /usr/src/sys/kern/subr_kdb.c:418 #8 0xc06d3d58 in trap (frame {tf_fs = 24, tf_es = 16, tf_ds = -875626480, tf_edi = 256, tf_esi = 1, tf_ebp = -875623592, tf_isp = -875623620, tf_ebx = -875623532, tf_edx = 1, tf_ecx = -1056882688, tf_eax = 18, tf_trapno = 3, tf_err 0, tf_eip = -1067945888, tf_cs = 8, tf_eflags = 646, tf_esp -1066268849, tf_ss = -1066277072}) at /usr/src/sys/i386/i386/trap.c:576 #9 0xc06bf80a in calltrap () at /usr/src/sys/i386/i386/exception.s:140 #10 0x00000018 in ?? () #11 0x00000010 in ?? () #12 0xcbcf0010 in ?? () #13 0x00000100 in ?? () #14 0x00000001 in ?? () #15 0xcbcf0b58 in ?? () #16 0xcbcf0b3c in ?? () #17 0xcbcf0b94 in ?? () #18 0x00000001 in ?? () #19 0xc1014000 in ?? () #20 0x00000012 in ?? () #21 0x00000003 in ?? () #22 0x00000000 in ?? () #23 0xc0587060 in kdb_enter (msg=0x0) at cpufunc.h:56 #24 0xc056a3aa in panic (fmt=0xc07327b3 "Duplicate free of item %p from zone %p(%s)\n") at /usr/src/sys/kern/kern_shutdown.c:542 #25 0xc0695e34 in uma_dbg_free (zone=0xc152e000, slab=0xc17fff70, item=0xc17ff084) at /usr/src/sys/vm/uma_dbg.c:276 #26 0xc06946e1 in uma_zfree_arg (zone=0xc152e000, item=0xc17ff084, udata=0x0) at /usr/src/sys/vm/uma_core.c:2222 #27 0xc052f6b2 in g_destroy_bio (bp=0x0) at uma.h:302 #28 0xc052d282 in g_disk_done (bp=0xc17ff084) at /usr/src/sys/geom/geom_disk.c:203 #29 0xc05bf510 in biodone (bp=0xc17ff084) at /usr/src/sys/kern/vfs_bio.c:3002 #30 0xc046f002 in ad_done (request=0xc17fc168) at /usr/src/sys/dev/ata/ata-disk.c:322 #31 0xc045e4ac in ata_completed (context=0xc17fc168, dummy=0) at /usr/src/sys/dev/ata/ata-queue.c:404 #32 0xc045e5fc in ata_timeout (request=0xc17fc168) at /usr/src/sys/dev/ata/ata-queue.c:442 #33 0xc05788b8 in softclock (dummy=0x0) at /usr/src/sys/kern/kern_timeout.c:259 #34 0xc0554132 in ithread_loop (arg=0xc14e4800) at /usr/src/sys/kern/kern_intr.c:546 #35 0xc0553176 in fork_exit (callout=0xc0553fc0 <ithread_loop>, arg=0x0, frame=0x0) at /usr/src/sys/kern/kern_fork.c:820 #36 0xc06bf86c in fork_trampoline () at /usr/src/sys/i386/i386/exception.s:209 -------------------------------------------------------------------------- Output from dmesg Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA2 #0: Tue Aug 31 16:48:01 CEST 2004 root@ceylonica:/usr/obj/usr/src/sys/CEYTEST WARNING: WITNESS option enabled, expect reduced performance. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 Mobile CPU 1.60GHz (1590.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf24 Stepping = 4 Features=0x3febf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM> real memory = 267911168 (255 MB) avail memory = 252452864 (240 MB) npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <SONY> on motherboard acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 cpu0: <ACPI CPU (2 Cx states)> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 acpi link get: empty IRQ resource acpi link get: empty IRQ resource acpi link get: empty IRQ resource pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82845 host to AGP bridge> mem 0xec000000-0xefffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <ATI Radeon LW Mobility 7500 M7> port 0x3000-0x30ff mem 0xe8100000-0xe810ffff,0xf0000000-0xf7ffffff irq 9 at device 0.0 on pci1 info: [drm] AGP at 0xec000000 64MB info: [drm] Initialized radeon 1.11.0 20020828 on minor 0 uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 9 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 acpi link get: empty IRQ resource acpi link get: empty IRQ resource pci2: <ACPI PCI bus> on pcib2 cbb0: <RF5C476 PCI-CardBus Bridge> irq 9 at device 5.0 on pci2 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb1: <RF5C476 PCI-CardBus Bridge> at device 5.1 on pci2 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 fwohci0: <Ricoh R5C552> mem 0xe8201000-0xe82017ff at device 5.2 on pci2 fwohci0: [GIANT-LOCKED] fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 08:00:46:03:01:16:9e:94 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 0a:00:46:16:9e:94 fwe0: Ethernet address: 0a:00:46:16:9e:94 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x4000-0x403f mem 0xe8200000-0xe8200fff irq 9 at device 8.0 on pci2 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 08:00:46:5c:6d:fc fxp0: [GIANT-LOCKED] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <multimedia, audio> at device 31.5 (no driver attached) pci0: <simple comms> at device 31.6 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model GlidePoint, device ID 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold ppbus0: <Parallel port bus> on ppc0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 1590816140 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ad0: 28615MB <IC25N030ATCS04-0/CA3OA71A> [58140/16/63] at ata0-master UDMA100 ATAPI_RESET time = 230us ata1-slave: FAILURE - ATAPI_IDENTIFY timed out ATAPI_RESET time = 240us acd0: CDRW <UJDA730 DVD/CDRW/1.00> at ata1-master UDMA33 (probe0:umass-sim0:0:0:0): INQUIRY. CDB: 12 0 0 0 24 0 (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition (probe0:umass-sim0:0:0:0): NOT READY asc:3a,0 (probe0:umass-sim0:0:0:0): Medium not present (probe0:umass-sim0:0:0:0): Unretryable error Mounting root from ufs:/dev/ad0s1a ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=49945023 ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=10029087 ad0: WARNING - READ_DMA interrupt was seen but timeout fired LBA=10029087 ad0: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=1659195 ad0: WARNING - WRITE_DMA interrupt was seen but timeout fired LBA=1659195 ad0: WARNING - WRITE_DMA interrupt was seen but taskqueue stalled LBA=1659195 Slab at 0xc17fff70, freei 1 = 0. panic: Duplicate free of item 0xc17ff084 from zone 0xc152e000(g_bio) cpuid = 0; KDB: enter: panic panic: from debugger cpuid = 0; Uptime: 36s Dumping 255 MB 16 32 48 64 80 96 112 128 144 160 176 192 208 224 240Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 -------------------------------------------------------------------------- The differences between my kernel config & GENERIC are : Removed: #cpu I486_CPU #cpu I586_CPU #options INET6 #options NFSSERVER #options NFS_ROOT #options KTRACE #options AHC_REG_PRETTY_PRINT #options AHD_REG_PRETTY_PRINT #device eisa #device ahb #device ahc #device ahd #device amd #device isp #device mpt #device sym #device trm #device adv #device adw #device bt #device amr #device asr #device ciss #device dpt #device iir #device ips #device mly #device twa #device aac #device aacp #device ida #device mlx #device pst #device twe #device plip #device de #device em #device txp #device vx #device bfe #device bge #device pcn #device rl #device sf #device sis #device sk #device ste #device ti #device tl #device fe #device wl #device an #device awi #device wi #device sl #device faith #device aue #device axe #device cue #device kue #device rue Added: device radeondrm device sound --------------------------------------------------------------------- I hope this is enough information to be useful. If someone wants to look at this and needs more information then I would be pleased to provide it. -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 187 bytes Desc: This is a digitally signed message part Url : http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20040831/6fa4fb48/attachment.bin