Wanting to test the -RC, I ran through the updating procedure this evening, but I am unable to boot the resulting kernel. The system hangs trying to detect something with the disks... This is one of those troublesome nvidia chipset A7N8X motherboards. I do not have a serial console set up, but here are the last few lines of a verbose boot... if I need to set up a serial line for more from the verbose boot, let me know... I can easily post a regular dmesg from my working kernel (built from March 5th sources) if that will help. (probe2:ata1:0:0:0): INQUIRY.CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB (probe2:ata1:0:0:0): TEST UNIT READY.CDB: 0 0 0 0 0 0 (probe2:ata1:0:0:0): NOT READY asc:3a,0 (probe2:ata1:0:0:0): medium not present (probe2:ata1:0:0:0): INQUIRY.CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): invalid field in CDB at this point it stops. _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus
>Wanting to test the -RC, I ran through the updating procedure this evening, >but I am unable to boot the resulting kernel. The system hangs trying to >detect something with the disks... >Ok, I attached a serial console to get the boot messages... First the kernel built from today's -stable sources: /kernel text=0x227aa5 data=0x42f18+0x21e7c syms=[0x4+0x37da0+0x4+0x3f435] /modules/linux.ko text=0x12314 data=0xfc8+0x4 syms=[0x4+0x2830+0x4+0x2177] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Booting [kernel] in 8 seconds... Booting [kernel] in 7 seconds... Booting [kernel] in 6 seconds... Type '?' for a list of commands, 'help' for more detailed help. ok boot -sv SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=01 base=0000000000100000 len=000000001fef0000 SMAP type=03 base=000000001fff3000 len=000000000000d000 SMAP type=04 base=000000001fff0000 len=0000000000003000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-PRERELEASE #4: Thu May 13 19:30:08 EDT 2004 root@homer:/mnt/obj/mnt/src/sys/HOMER Calibrating clock(s) ... TSC clock: 1664119808 Hz, i8254 clock: 1193162 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1664158332 Hz CPU: AMD Athlon(tm) XP 2000+ (1664.16-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,P SE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x000001000 - 0x00009efff, 647168 bytes (158 pages) 0x000446000 - 0x01ffe7fff, 532291584 bytes (129954 pages) avail memory = 518127616 (505984K bytes) bios32: Found BIOS32 Service Directory header at 0xc00faff0 bios32: Entry = 0xfb480 (c00fb480) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb4b0 pnpbios: Found PnP BIOS data at 0xc00fbf20 pnpbios: Entry = f0000:bf50 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6d80 Preloaded elf kernel "kernel" at 0xc041f000. Preloaded elf module "linux.ko" at 0xc041f0a8. Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=01e010de) Using $PIR table, 11 entries at 0xc00fdeb0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x10de, dev=0x01e0, revid=0xa2 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x10de, dev=0x01eb, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ee, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ed, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ec, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ef, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0060, revid=0xa3 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0064, revid=0xa2 class=0c-05-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base 0000e000, size 5 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base ed087000, size 12 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=3 map[10]: type 1, range 32, base ed082000, size 12 found-> vendor=0x10de, dev=0x0068, revid=0xa3 class=0c-03-20, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=c, irq=5 map[10]: type 1, range 32, base ed083000, size 8 found-> vendor=0x10de, dev=0x0066, revid=0xa1 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed086000, size 12 map[14]: type 1, range 32, base 0000e400, size 3 found-> vendor=0x10de, dev=0x006b, revid=0xa2 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed000000, size 19 found-> vendor=0x10de, dev=0x006a, revid=0xa1 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000d000, size 8 map[14]: type 1, range 32, base 0000d400, size 7 map[18]: type 1, range 32, base ed080000, size 12 found-> vendor=0x10de, dev=0x006c, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x10de, dev=0x0065, revid=0xa2 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x10de, dev=0x006d, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 found-> vendor=0x10de, dev=0x006e, revid=0xa3 class=0c-00-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base ed084000, size 11 map[14]: type 1, range 32, base ed085000, size 6 found-> vendor=0x10de, dev=0x01e8, revid=0xa2 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=3 secondarybus=3 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x10de, dev=0x01eb) at 0.1 pci0: <unknown card> (vendor=0x10de, dev=0x01ee) at 0.2 pci0: <unknown card> (vendor=0x10de, dev=0x01ed) at 0.3 pci0: <unknown card> (vendor=0x10de, dev=0x01ec) at 0.4 pci0: <unknown card> (vendor=0x10de, dev=0x01ef) at 0.5 isab0: <PCI to ISA bridge (vendor=10de device=0060)> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <unknown card> (vendor=0x10de, dev=0x0064) at 1.1 ohci0: <OHCI (generic) USB controller> mem 0xed087000-0xed087fff irq 5 at device 2.0 on pci0 ohci0: (New OHCI DeviceId=0x006710de) usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xed082000-0xed082fff irq 3 at device 2.1 on pci0 ohci1: (New OHCI DeviceId=0x006710de) usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <USB controller> (vendor=0x10de, dev=0x0068) at 2.2 irq 5 pci0: <unknown card> (vendor=0x10de, dev=0x0066) at 4.0 irq 3 pci0: <unknown card> (vendor=0x10de, dev=0x006b) at 5.0 irq 3 pcm0: <Nvidia nForce2> port 0xd400-0xd47f,0xd000-0xd0ff mem 0xed080000-0xed080fff irq 5 at device 6.0 on pci0 using shared irq5. pcm0: <Avance Logic ALC650 AC97 Codec (id = 0x414c4720)> pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enha ncement pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, ce nter DAC, surround DAC, LFE DAC, reserved 4 pcm0: sndbuf_setmap 5000, 4000; 0xd5d32000 -> 5000 pcm0: sndbuf_setmap 9000, 4000; 0xd5d36000 -> 9000 pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at device 8.0 on pci0 found-> vendor=0x1095, dev=0x3112, revid=0x02 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000a000, size 3 map[14]: type 1, range 32, base 0000a400, size 2 map[18]: type 1, range 32, base 0000a800, size 3 map[1c]: type 1, range 32, base 0000ac00, size 2 map[20]: type 1, range 32, base 0000b000, size 4 map[24]: type 1, range 32, base ec000000, size 9 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x1095, dev=0x3112) at 11.0 irq 11 atapci0: <nVIDIA nForce2 ATA133 controller> port 0xf000-0xf00f at device 9.0 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pcib2: <PCI to PCI bridge (vendor=10de device=006d)> at device 12.0 on pci0 found-> vendor=0x10b7, dev=0x9201, revid=0x40 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000c000, size 7 map[14]: type 1, range 32, base e7000000, size 7 pci2: <PCI bus> on pcib2 xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f mem 0xe7000000-0x e700007f irq 5 at device 1.0 on pci2 xl0: using port I/O xl0: Ethernet address: 00:26:54:0a:df:a2 xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x000895, model 0x0012, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached fwohci0: vendor=10de, dev=6e fwohci0: <1394 Open Host Controller Interface> mem 0xed085000-0xed08503f,0xed084000-0xed 0847ff irq 11 at device 13.0 on pci0 fwohci0: latency timer 0 -> 32. fwohci0: cache size 0 -> 8. using shared irq11. fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:16:af:0a fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xfffeafe2 -> 0xfffeafe2 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:16:af:0a bpf: fwe0 attached sbp_post_busreset fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 pcib3: <PCI to PCI bridge (vendor=10de device=01e8)> at device 30.0 on pci0 found-> vendor=0x102b, dev=0x0525, revid=0x85 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e4000000, size 25 map[14]: type 1, range 32, base e8000000, size 14 map[18]: type 1, range 32, base e9000000, size 23 pci3: <PCI bus> on pcib3 pci3: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcd7ff,0xce000-0xce7ff on isa0 pmtimer0 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 03 06 psm: status 00 33 55 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: faith0 attached IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 10 packets/entry by default bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c828, tty 6310b2, net 6718b2 bpf: sl0 attached Linux ELF exec handler installed ad0: success setting UDMA5 on nVIDIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA5 on nVIDIA chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <WDC WD400BB-60BNA1/18.20D18> ATA-5 disk at ata0-slave ad1: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <LITE-ON LTR-52246S/6S0C> CD-RW drive at ata1 as master acd0: read 40734KB/s (48034KB/s) write 172KB/s (8937KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 48004 Hz, will use 48000 Hz (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB (probe2:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe2:ata1:0:0:0): NOT READY asc:3a,0 (probe2:ata1:0:0:0): Medium not present (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB And here is one from a working kernel dated March 5 : /kernel text=0x227aa5 data=0x42f18+0x21e7c syms=[0x4+0x37da0+0x4+0x3f435] /modules/linux.ko text=0x12314 data=0xfc8+0x4 syms=[0x4+0x2830+0x4+0x2177] Hit [Enter] to boot immediately, or any other key for command prompt. Booting [kernel] in 9 seconds... Type '?' for a list of commands, 'help' for more detailed help. ok unload ok load kernel.old /kernel.old text=0x223685 data=0x46264+0x21e90 syms=[0x4+0x37c40+0x4+0x3efca] ok boot -sv SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=01 base=0000000000100000 len=000000001fef0000 SMAP type=03 base=000000001fff3000 len=000000000000d000 SMAP type=04 base=000000001fff0000 len=0000000000003000 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.9-STABLE #3: Fri Mar 5 18:14:40 EST 2004 lee@homer:/mnt/obj/mnt/src/sys/HOMER Calibrating clock(s) ... TSC clock: 1664116787 Hz, i8254 clock: 1193160 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1664154952 Hz CPU: AMD Athlon(tm) XP 2000+ (1664.15-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,P SE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x000001000 - 0x00009efff, 647168 bytes (158 pages) 0x00042c000 - 0x01ffe7fff, 532398080 bytes (129980 pages) avail memory = 518230016 (506084K bytes) bios32: Found BIOS32 Service Directory header at 0xc00faff0 bios32: Entry = 0xfb480 (c00fb480) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb4b0 pnpbios: Found PnP BIOS data at 0xc00fbf20 pnpbios: Entry = f0000:bf50 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6d80 Preloaded elf kernel "kernel.old" at 0xc0405000. Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=01e010de) Using $PIR table, 11 entries at 0xc00fdeb0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x10de, dev=0x01e0, revid=0xa2 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x10de, dev=0x01eb, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ee, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ed, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ec, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ef, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0060, revid=0xa3 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0064, revid=0xa2 class=0c-05-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base 0000e000, size 5 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base ed087000, size 12 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=3 map[10]: type 1, range 32, base ed082000, size 12 found-> vendor=0x10de, dev=0x0068, revid=0xa3 class=0c-03-20, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=c, irq=5 map[10]: type 1, range 32, base ed083000, size 8 found-> vendor=0x10de, dev=0x0066, revid=0xa1 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed086000, size 12 map[14]: type 1, range 32, base 0000e400, size 3 found-> vendor=0x10de, dev=0x006b, revid=0xa2 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed000000, size 19 found-> vendor=0x10de, dev=0x006a, revid=0xa1 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000d000, size 8 map[14]: type 1, range 32, base 0000d400, size 7 map[18]: type 1, range 32, base ed080000, size 12 found-> vendor=0x10de, dev=0x006c, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x10de, dev=0x0065, revid=0xa2 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x10de, dev=0x006d, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 found-> vendor=0x10de, dev=0x006e, revid=0xa3 class=0c-00-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base ed084000, size 11 map[14]: type 1, range 32, base ed085000, size 6 found-> vendor=0x10de, dev=0x01e8, revid=0xa2 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=3 secondarybus=3 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x10de, dev=0x01eb) at 0.1 pci0: <unknown card> (vendor=0x10de, dev=0x01ee) at 0.2 pci0: <unknown card> (vendor=0x10de, dev=0x01ed) at 0.3 pci0: <unknown card> (vendor=0x10de, dev=0x01ec) at 0.4 pci0: <unknown card> (vendor=0x10de, dev=0x01ef) at 0.5 isab0: <PCI to ISA bridge (vendor=10de device=0060)> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <unknown card> (vendor=0x10de, dev=0x0064) at 1.1 ohci0: <OHCI (generic) USB controller> mem 0xed087000-0xed087fff irq 5 at device 2.0 on pci0 ohci0: (New OHCI DeviceId=0x006710de) usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xed082000-0xed082fff irq 3 at device 2.1 on pci0 ohci1: (New OHCI DeviceId=0x006710de) usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <USB controller> (vendor=0x10de, dev=0x0068) at 2.2 irq 5 pci0: <unknown card> (vendor=0x10de, dev=0x0066) at 4.0 irq 3 pci0: <unknown card> (vendor=0x10de, dev=0x006b) at 5.0 irq 3 pcm0: <Nvidia nForce2> port 0xd400-0xd47f,0xd000-0xd0ff mem 0xed080000-0xed080fff irq 5 at device 6.0 on pci0 using shared irq5. pcm0: <Avance Logic ALC650 AC97 Codec (id = 0x414c4720)> pcm0: Codec features 20 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enha ncement pcm0: Primary codec extended features variable rate PCM, double rate PCM, reserved 1, ce nter DAC, surround DAC, LFE DAC, reserved 4 pcm0: sndbuf_setmap f000, 4000; 0xd5d40000 -> f000 pcm0: sndbuf_setmap 13000, 4000; 0xd5d44000 -> 13000 pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at device 8.0 on pci0 found-> vendor=0x1095, dev=0x3112, revid=0x02 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000a000, size 3 map[14]: type 1, range 32, base 0000a400, size 2 map[18]: type 1, range 32, base 0000a800, size 3 map[1c]: type 1, range 32, base 0000ac00, size 2 map[20]: type 1, range 32, base 0000b000, size 4 map[24]: type 1, range 32, base ec000000, size 9 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x1095, dev=0x3112) at 11.0 irq 11 atapci0: <nVIDIA nForce2 ATA133 controller> port 0xf000-0xf00f at device 9.0 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pcib2: <PCI to PCI bridge (vendor=10de device=006d)> at device 12.0 on pci0 found-> vendor=0x10b7, dev=0x9201, revid=0x40 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000c000, size 7 map[14]: type 1, range 32, base e7000000, size 7 pci2: <PCI bus> on pcib2 xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f mem 0xe7000000-0x e700007f irq 5 at device 1.0 on pci2 xl0: using port I/O xl0: Ethernet address: 00:26:54:0a:df:a2 xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x000895, model 0x0012, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached fwohci0: vendor=10de, dev=6e fwohci0: <1394 Open Host Controller Interface> mem 0xed085000-0xed08503f,0xed084000-0xed 0847ff irq 11 at device 13.0 on pci0 fwohci0: latency timer 0 -> 32. fwohci0: cache size 0 -> 8. using shared irq11. fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:16:af:0a fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xfffeafe2 -> 0xfffeafe2 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:16:af:0a bpf: fwe0 attached fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 pcib3: <PCI to PCI bridge (vendor=10de device=01e8)> at device 30.0 on pci0 found-> vendor=0x102b, dev=0x0525, revid=0x85 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e4000000, size 25 map[14]: type 1, range 32, base e8000000, size 14 map[18]: type 1, range 32, base e9000000, size 23 pci3: <PCI bus> on pcib3 pci3: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11 ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcd7ff,0xce000-0xce7ff on isa0 pmtimer0 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 03 06 psm: status 00 33 55 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 05 a0 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: sl0 attached bpf: faith0 attached IP packet filtering initialized, divert disabled, rule-based forwarding enabled, default to deny, logging limited to 10 packets/entry by default bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c828, tty 6310b2, net 6718b2 ad0: success setting UDMA5 on nVIDIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA5 on nVIDIA chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <WDC WD400BB-60BNA1/18.20D18> ATA-5 disk at ata0-slave ad1: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <LITE-ON LTR-52246S/6S0C> CD-RW drive at ata1 as master acd0: read 40734KB/s (48034KB/s) write 172KB/s (8937KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc pcm0: measured ac97 link rate at 47995 Hz, will use 48000 Hz (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB (probe2:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 (probe2:ata1:0:0:0): NOT READY asc:3a,0 (probe2:ata1:0:0:0): Medium not present (probe2:ata1:0:0:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 (probe2:ata1:0:0:0): Invalid field in CDB Creating DISK cd0 pass0 at ata1 bus 0 target 0 lun 0 pass0: <LITE-ON LTR-52246S 6S0C> Removable CD-ROM SCSI-0 device pass0: 16.000MB/s transfers Mounting root from ufs:/dev/ad0s1a (cd0:ata1:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:ata1:0:0:0): NOT READY asc:3a,0 (cd0:ata1:0:0:0): Medium not present cd0 at ata1 bus 0 target 0 lun 0 cd0: <LITE-ON LTR-52246S 6S0C> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present ad0s1: type 0xa5, start 63, end = 156296384, size 156296322 : OK start_init: trying /sbin/init Enter root password, or ^D to go multi-user I hope this helps... let me know what else I might need to show. Thank you for your time. _________________________________________________________________ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus
Lee Harr wrote:> Wanting to test the -RC, I ran through the updating procedure this evening, > but I am unable to boot the resulting kernel. The system hangs trying to > detect something with the disks... > > This is one of those troublesome nvidia chipset A7N8X motherboards.I'm having the same problem on an A7N8X Delux. I tried a 4.10-BETA a few weeks ago and had the problem then too. -- Brandon Fosdick http://www.terranspace.org
>>Wanting to test the -RC, I ran through the updating procedure this >>evening, >>but I am unable to boot the resulting kernel. The system hangs trying to >>detect something with the disks... >> > > >Ok, I attached a serial console to get the boot messages... First >the kernel built from today's -stable sources: >I thought maybe there was something with my particular configuration, so I tried this again with a GENERIC kernel. It does look a bit different, but with the same ultimate result... [...] Creating DISK ad0 ar: FreeBSD check1 failed ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA5 on nVIDIA chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <WDC WD400BB-60BNA1/18.20D18> ATA-5 disk at ata0-slave ad1: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <LITE-ON LTR-52246S/6S0C> CD-RW drive at ata1 as master acd0: read 43484KB/s (48034KB/s) write 172KB/s (8937KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Here it stops. _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus
>OK! I'm giving up on FreeBSD 4.10. I just updatest my source RELENG_4, >rebuilt world and the kernel and it just won't boot. Now I'm going to >upgrade my system from 4.10 to 4.9 which is the latest stable FreeBSD >I've used. > >If there is _anynoe_ out there who has succeded to boot FreeBSD 4.10 on a >Asus A7N8X (Deluxe) motherboard _please_ tell me.Just out of curiosity, I burned a 4.10-RELEASE cd and tried booting that. It boots in to sysinstall normally! So, now... what could be the difference that allows the cd to boot, but not the same kernel booting from the hard drive? _________________________________________________________________ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail
> > So, now... what could be the difference that allows the cd to boot, but > > not the same kernel booting from the hard drive? > >Corruped /boot/loader? > >It would be nice to have more detail, like output. >I posted boot messages ("boot -sv") from several non-working kernels (around the time of 4.10-release) as well as a working boot from early March. http://lists.freebsd.org/pipermail/freebsd-stable/2004-May/007407.html http://lists.freebsd.org/pipermail/freebsd-stable/2004-May/007411.html http://lists.freebsd.org/pipermail/freebsd-stable/2004-May/007428.html Not sure what else to show... should I attach my serial console to get the cd boot messages? Thanks for your time. _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail
Lee Harr wrote:> Just out of curiosity, I burned a 4.10-RELEASE cd and tried > booting that. It boots in to sysinstall normally! > > So, now... what could be the difference that allows the cd to boot, but > not the same kernel booting from the hard drive?I just tried the same thing, except that I blew away by old installation first. Install finished normally, but on the first reboot it hung up on the IDE stuff again. Since I'm dual booting with win2k I decided to replace the ancient bootsect.bsd file I had been using with /boot/boot1 from the livefs cd (disc2). Same results. Now what? Its weird how it will boot from the cd w/o problem but it barfs from the hard drive. I don't have a non-dual boot machine to try...I wonder if that's the problem. Has anybody filed a PR for this yet?
> > I posted boot messages ("boot -sv") from several non-working > > kernels (around the time of 4.10-release) as well as a working > > boot from early March. > >You're complaining about two distinct problems here, unless I'm >misinterpreting you. >Doesn't boot. That's all.> > Not sure what else to show... should I attach my serial console to get > > the cd boot messages? > >Yes please. >Ok.>Also, Lite-on drives are known to have buggy firmware. Does removing the >CDROM drive make it boot? >Hmm. I looked at the Lite-on site and their firmware upgrade requires MS Windows. That would make my inexpensive cd drive about 3x more expensive, by my calculations... I will try booting without it. Thanks for your time. _________________________________________________________________ The new MSN 8: advanced junk mail protection and 2 months FREE* http://join.msn.com/?page=features/junkmail
Lee Harr wrote:> So, now... what could be the difference that allows the cd to boot, but > not the same kernel booting from the hard drive?Do we know that the cd has the same kernel? Could it be possible that the install cd's kernel isn't GENERIC?
>> > Not sure what else to show... should I attach my serial console to get >> > the cd boot messages? >> >>Yes please. >>Here is the boot -sv using the 4.10-RELEASE cd SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=01 base=0000000000100000 len=000000001fef0000 SMAP type=03 base=000000001fff3000 len=000000000000d000 SMAP type=04 base=000000001fff0000 len=0000000000003000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-RELEASE #0: Tue May 25 22:52:21 GMT 2004 root@perseus.cse.buffalo.edu:/usr/obj/usr/src/sys/BOOTMFS Calibrating clock(s) ... TSC clock: 1664112508 Hz, i8254 clock: 1193157 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 1664158122 Hz CPU: AMD Athlon(tm) XP 2000+ (1664.16-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x000001000 - 0x00009efff, 647168 bytes (158 pages) 0x000850000 - 0x01ffe7fff, 528056320 bytes (128920 pages) config> intro [snip kernel config screen] avail memory = 514338816 (502284K bytes) bios32: Found BIOS32 Service Directory header at 0xc00faff0 bios32: Entry = 0xfb480 (c00fb480) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb4b0 pnpbios: Found PnP BIOS data at 0xc00fbf20 pnpbios: Entry = f0000:bf50 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6d80 Preloaded elf kernel "kernel" at 0xc0829000. Preloaded mfs_root "/mfsroot" at 0xc0829090. Pentium Pro MTRR support enabled md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03ef3d4 Creating DISK md0 Creating DISK md1 md1: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x80000888 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=01e010de) Using $PIR table, 11 entries at 0xc00fdeb0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x10de, dev=0x01e0, revid=0xa2 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x10de, dev=0x01eb, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ee, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ed, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ec, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ef, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0060, revid=0xa3 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0064, revid=0xa2 class=0c-05-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base 0000e000, size 5 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base ed087000, size 12 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=3 map[10]: type 1, range 32, base ed082000, size 12 found-> vendor=0x10de, dev=0x0068, revid=0xa3 class=0c-03-20, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=c, irq=5 map[10]: type 1, range 32, base ed083000, size 8 found-> vendor=0x10de, dev=0x0066, revid=0xa1 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed086000, size 12 map[14]: type 1, range 32, base 0000e400, size 3 found-> vendor=0x10de, dev=0x006b, revid=0xa2 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed000000, size 19 found-> vendor=0x10de, dev=0x006a, revid=0xa1 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000d000, size 8 map[14]: type 1, range 32, base 0000d400, size 7 map[18]: type 1, range 32, base ed080000, size 12 found-> vendor=0x10de, dev=0x006c, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x10de, dev=0x0065, revid=0xa2 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x10de, dev=0x006d, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 found-> vendor=0x10de, dev=0x006e, revid=0xa3 class=0c-00-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base ed084000, size 11 map[14]: type 1, range 32, base ed085000, size 6 found-> vendor=0x10de, dev=0x01e8, revid=0xa2 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=3 secondarybus=3 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x10de, dev=0x01eb) at 0.1 pci0: <unknown card> (vendor=0x10de, dev=0x01ee) at 0.2 pci0: <unknown card> (vendor=0x10de, dev=0x01ed) at 0.3 pci0: <unknown card> (vendor=0x10de, dev=0x01ec) at 0.4 pci0: <unknown card> (vendor=0x10de, dev=0x01ef) at 0.5 isab0: <PCI to ISA bridge (vendor=10de device=0060)> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <unknown card> (vendor=0x10de, dev=0x0064) at 1.1 ohci0: <OHCI (generic) USB controller> mem 0xed087000-0xed087fff irq 5 at device 2.0 on pci0 ohci0: (New OHCI DeviceId=0x006710de) usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xed082000-0xed082fff irq 3 at device 2.1 on pci0 ohci1: (New OHCI DeviceId=0x006710de) usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <USB controller> (vendor=0x10de, dev=0x0068) at 2.2 irq 5 pci0: <unknown card> (vendor=0x10de, dev=0x0066) at 4.0 irq 3 pci0: <unknown card> (vendor=0x10de, dev=0x006b) at 5.0 irq 3 pci0: <unknown card> (vendor=0x10de, dev=0x006a) at 6.0 irq 5 pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at device 8.0 on pci0 found-> vendor=0x1095, dev=0x3112, revid=0x02 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000a000, size 3 map[14]: type 1, range 32, base 0000a400, size 2 map[18]: type 1, range 32, base 0000a800, size 3 map[1c]: type 1, range 32, base 0000ac00, size 2 map[20]: type 1, range 32, base 0000b000, size 4 map[24]: type 1, range 32, base ec000000, size 9 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x1095, dev=0x3112) at 11.0 irq 11 atapci0: <nVIDIA nForce2 ATA133 controller> port 0xf000-0xf00f at device 9.0 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: mask=03 stat0=00 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci0 pcib2: <PCI to PCI bridge (vendor=10de device=006d)> at device 12.0 on pci0 found-> vendor=0x10b7, dev=0x9201, revid=0x40 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000c000, size 7 map[14]: type 1, range 32, base e7000000, size 7 pci2: <PCI bus> on pcib2 xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f mem 0xe7000000-0xe700007f irq 5 at device 1.0 on pci2 xl0: using port I/O xl0: Ethernet address: 00:26:54:0a:df:a2 xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x000895, model 0x0012, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached using shared irq5. pci0: <unknown card> (vendor=0x10de, dev=0x006e) at 13.0 irq 11 pcib3: <PCI to PCI bridge (vendor=10de device=01e8)> at device 30.0 on pci0 found-> vendor=0x102b, dev=0x0525, revid=0x85 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e4000000, size 25 map[14]: type 1, range 32, base e8000000, size 14 map[18]: type 1, range 32, base e9000000, size 23 pci3: <PCI bus> on pcib3 pci3: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcd7ff,0xce000-0xce7ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - fe bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed fe aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 03 06 psm: status 00 33 55 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: sl0 attached ad0: success setting UDMA5 on nVIDIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA5 on nVIDIA chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <WDC WD400BB-60BNA1/18.20D18> ATA-5 disk at ata0-slave ad1: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <LITE-ON LTR-52246S/6S0C> CD-RW drive at ata1 as master acd0: read 1375KB/s (48034KB/s) write 8937KB/s (8937KB/s), 2048KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, packet acd0: Writes: CD-R, CD-RW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: CD-R 120mm data disc Mounting root from ufs:/dev/md0c start_init: trying /sbin/init start_init: trying /sbin/oinit start_init: trying /sbin/init.bak start_init: trying /stand/sysinstall /stand/sysinstall running as init on serial console These are the predefined terminal types available to sysinstall when running stand-alone. Please choose the closest match for your particular terminal. 1 ...................... Standard ANSI terminal. 2 ...................... VT100 or compatible terminal. 3 ...................... FreeBSD system console (color). 4 ...................... FreeBSD system console (monochrome). 5 ...................... xterm terminal emulator. Your choice: (1-5) 1 fwohci0: vendor=10de, dev=6e fwohci0: <1394 Open Host Controller Interface> mem 0xed085000-0xed08503f,0xed084000-0xed0847ff irq 11 at device 13.0 on pci0 fwohci0: latency timer 0 -> 32. fwohci0: cache size 0 -> 8. using shared irq11. fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:16:af:0a fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xf864a232 -> 0xf864a232 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:16:af:0a bpf: fwe0 attached sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=0) sbp_post_busreset sbp_post_explore (sbp_cold=1) aha0: status reg test failed ff sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x105 0x105 0x105 0x105 sio1: probe failed test(s): 0 1 2 4 6 7 9>>Also, Lite-on drives are known to have buggy firmware. Does removing the >>CDROM drive make it boot? >>No. That does not help. Here is the boot message with the cd drive disconnected: SMAP type=01 base=0000000000000000 len=000000000009fc00 SMAP type=02 base=00000000000f0000 len=0000000000010000 SMAP type=02 base=00000000fec00000 len=0000000000001000 SMAP type=02 base=00000000fee00000 len=0000000000001000 SMAP type=02 base=00000000ffff0000 len=0000000000010000 SMAP type=02 base=000000000009fc00 len=0000000000000400 SMAP type=01 base=0000000000100000 len=000000001fef0000 SMAP type=03 base=000000001fff3000 len=000000000000d000 SMAP type=04 base=000000001fff0000 len=0000000000003000 Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.10-STABLE #2: Fri May 28 02:16:56 EDT 2004 lee@homer:/mnt/obj/mnt/src/sys/GENERIC Calibrating clock(s) ... TSC clock: 1664107303 Hz, i8254 clock: 1193153 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method CPU: AMD Athlon(tm) XP 2000+ (1664.15-MHz 686-class CPU) Origin = "AuthenticAMD" Id = 0x680 Stepping = 0 Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> AMD Features=0xc0400000<AMIE,DSP,3DNow!> Data TLB: 32 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 256 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536805376 (524224K bytes) Physical memory chunk(s): 0x000001000 - 0x00009efff, 647168 bytes (158 pages) 0x000592000 - 0x01ffe7fff, 530931712 bytes (129622 pages) avail memory = 516767744 (504656K bytes) bios32: Found BIOS32 Service Directory header at 0xc00faff0 bios32: Entry = 0xfb480 (c00fb480) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xb4b0 pnpbios: Found PnP BIOS data at 0xc00fbf20 pnpbios: Entry = f0000:bf50 Rev = 1.0 Other BIOS signatures found: ACPI: 000f6d80 Preloaded elf kernel "kernel" at 0xc056b000. Preloaded elf module "linux.ko" at 0xc056b0a8. Pentium Pro MTRR support enabled Creating DISK md0 md0: Malloc disk Math emulator present pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=01e010de) Using $PIR table, 11 entries at 0xc00fdeb0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Host to PCI bridge> on motherboard found-> vendor=0x10de, dev=0x01e0, revid=0xa2 class=06-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 map[10]: type 1, range 32, base e0000000, size 26 found-> vendor=0x10de, dev=0x01eb, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ee, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ed, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ec, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x01ef, revid=0xa2 class=05-00-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0060, revid=0xa3 class=06-01-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 found-> vendor=0x10de, dev=0x0064, revid=0xa2 class=0c-05-00, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=255 map[10]: type 1, range 32, base 0000e000, size 5 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base ed087000, size 12 found-> vendor=0x10de, dev=0x0067, revid=0xa3 class=0c-03-10, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=b, irq=3 map[10]: type 1, range 32, base ed082000, size 12 found-> vendor=0x10de, dev=0x0068, revid=0xa3 class=0c-03-20, hdrtype=0x00, mfdev=1 subordinatebus=0 secondarybus=0 intpin=c, irq=5 map[10]: type 1, range 32, base ed083000, size 8 found-> vendor=0x10de, dev=0x0066, revid=0xa1 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed086000, size 12 map[14]: type 1, range 32, base 0000e400, size 3 found-> vendor=0x10de, dev=0x006b, revid=0xa2 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=3 map[10]: type 1, range 32, base ed000000, size 19 found-> vendor=0x10de, dev=0x006a, revid=0xa1 class=04-01-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000d000, size 8 map[14]: type 1, range 32, base 0000d400, size 7 map[18]: type 1, range 32, base ed080000, size 12 found-> vendor=0x10de, dev=0x006c, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=1 secondarybus=1 found-> vendor=0x10de, dev=0x0065, revid=0xa2 class=01-01-8a, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 map[20]: type 1, range 32, base 0000f000, size 4 found-> vendor=0x10de, dev=0x006d, revid=0xa3 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=2 secondarybus=2 found-> vendor=0x10de, dev=0x006e, revid=0xa3 class=0c-00-10, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base ed084000, size 11 map[14]: type 1, range 32, base ed085000, size 6 found-> vendor=0x10de, dev=0x01e8, revid=0xa2 class=06-04-00, hdrtype=0x01, mfdev=0 subordinatebus=3 secondarybus=3 pci0: <PCI bus> on pcib0 pci0: <unknown card> (vendor=0x10de, dev=0x01eb) at 0.1 pci0: <unknown card> (vendor=0x10de, dev=0x01ee) at 0.2 pci0: <unknown card> (vendor=0x10de, dev=0x01ed) at 0.3 pci0: <unknown card> (vendor=0x10de, dev=0x01ec) at 0.4 pci0: <unknown card> (vendor=0x10de, dev=0x01ef) at 0.5 isab0: <PCI to ISA bridge (vendor=10de device=0060)> at device 1.0 on pci0 isa0: <ISA bus> on isab0 pci0: <unknown card> (vendor=0x10de, dev=0x0064) at 1.1 ohci0: <OHCI (generic) USB controller> mem 0xed087000-0xed087fff irq 5 at device 2.0 on pci0 ohci0: (New OHCI DeviceId=0x006710de) usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 3 ports with 3 removable, self powered ohci1: <OHCI (generic) USB controller> mem 0xed082000-0xed082fff irq 3 at device 2.1 on pci0 ohci1: (New OHCI DeviceId=0x006710de) usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: (0x10de) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 3 ports with 3 removable, self powered pci0: <USB controller> (vendor=0x10de, dev=0x0068) at 2.2 irq 5 pci0: <unknown card> (vendor=0x10de, dev=0x0066) at 4.0 irq 3 pci0: <unknown card> (vendor=0x10de, dev=0x006b) at 5.0 irq 3 pci0: <unknown card> (vendor=0x10de, dev=0x006a) at 6.0 irq 5 pcib1: <PCI to PCI bridge (vendor=10de device=006c)> at device 8.0 on pci0 found-> vendor=0x1095, dev=0x3112, revid=0x02 class=01-04-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base 0000a000, size 3 map[14]: type 1, range 32, base 0000a400, size 2 map[18]: type 1, range 32, base 0000a800, size 3 map[1c]: type 1, range 32, base 0000ac00, size 2 map[20]: type 1, range 32, base 0000b000, size 4 map[24]: type 1, range 32, base ec000000, size 9 pci1: <PCI bus> on pcib1 pci1: <unknown card> (vendor=0x1095, dev=0x3112) at 11.0 irq 11 atapci0: <nVIDIA nForce2 ATA133 controller> port 0xf000-0xf00f at device 9.0 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xf000 ata0: mask=03 ostat0=50 ostat2=50 ata0-master: ATAPI 00 00 ata0-slave: ATAPI 00 00 ata0: mask=03 stat0=50 stat1=50 ata0-master: ATA 01 a5 ata0-slave: ATA 01 a5 ata0: devices=03 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xf008 ata1: mask=03 ostat0=20 ostat2=30 ata1-master: ATAPI 20 20 ata1-slave: ATAPI 30 30 ata1: mask=03 stat0=20 stat1=30 ata1-master: ATA 25 25 ata1-slave: ATA 25 25 ata1: devices=00 ata1: at 0x170 irq 15 on atapci0 pcib2: <PCI to PCI bridge (vendor=10de device=006d)> at device 12.0 on pci0 found-> vendor=0x10b7, dev=0x9201, revid=0x40 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=5 map[10]: type 1, range 32, base 0000c000, size 7 map[14]: type 1, range 32, base e7000000, size 7 pci2: <PCI bus> on pcib2 xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xc000-0xc07f mem 0xe7000000-0xe700007f irq 5 at device 1.0 on pci2 xl0: using port I/O xl0: Ethernet address: 00:26:54:0a:df:a2 xl0: media options word: 40 xl0: found MII/AUTO miibus0: <MII bus> on xl0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: OUI 0x000895, model 0x0012, rev. 1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached using shared irq5. fwohci0: vendor=10de, dev=6e fwohci0: <1394 Open Host Controller Interface> mem 0xed085000-0xed08503f,0xed084000-0xed0847ff irq 11 at device 13.0 on pci0 fwohci0: latency timer 0 -> 32. fwohci0: cache size 0 -> 8. using shared irq11. fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:16:af:0a fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x3 loop=1, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=1, retry=0 fwohci0: fwphy_rddata: 0x2 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: fwphy_rddata: 0x4 loop=1, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0x601ca002 -> 0xf81ca002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:16:af:0a bpf: fwe0 attached sbp0: <SBP-2/SCSI over FireWire> on firewire0 sbp_attach (cold=1) sbp_post_busreset fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 fwohci0: fwphy_rddata: 0x1 loop=1, retry=0 pcib3: <PCI to PCI bridge (vendor=10de device=01e8)> at device 30.0 on pci0 found-> vendor=0x102b, dev=0x0525, revid=0x85 class=03-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=11 map[10]: type 1, range 32, base e4000000, size 25 map[14]: type 1, range 32, base e8000000, size 14 map[18]: type 1, range 32, base e9000000, size 23 pci3: <PCI bus> on pcib3 pci3: <Matrox MGA G400 AGP graphics accelerator> (vendor=0x102b, dev=0x0525) at 0.0 irq 11 ex_isa_identify() ata-: ata0 exists, using next available unit number ata-: ata1 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xc0000-0xc87ff,0xcc000-0xcd7ff,0xce000-0xce7ff on isa0 pmtimer0 on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 ata2 failed to probe at port 0x1f0 irq 14 on isa0 ata3 failed to probe at port 0x170 irq 15 on isa0 adv0 failed to probe on isa0 bt0: Failed Status Reg Test - fe bt_isa_probe: Probe failed at 0x330 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x334 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x230 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x234 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x130 bt0: Failed Status Reg Test - ff bt_isa_probe: Probe failed at 0x134 bt0 failed to probe at port 0x134-0x137 on isa0 aha0: status reg test failed fe aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0: status reg test failed ff aha0 failed to probe at port 0x134-0x137 on isa0 aic0 failed to probe at port 0x140-0x15f on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x1d0000 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 03 06 psm: status 00 33 55 psm: data 08 00 00 psm: status 00 02 64 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model NetMouse/NetScroll Optical, device ID 0-00, 3 buttons psm0: config:00000000, flags:00000000, packet size:4 psm0: syncmask:08, syncbits:08 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) sio0: irq maps: 0x1 0x11 0x1 0x1 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A, console sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: irq maps: 0x1 0x1 0x1 0x1 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) ppc0: parallel port found at 0x378 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 bpf: lp0 attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) cs0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. bpf: lo0 attached bpf: ppp0 attached new masks: bio 68c868, tty 631092, net 6718b2 bpf: sl0 attached bpf: faith0 attached Linux ELF exec handler installed ad0: success setting UDMA5 on nVIDIA chip Creating DISK ad0 ar: FreeBSD check1 failed ad0: <WDC WD800JB-00ETA0/77.07W77> ATA-6 disk at ata0-master ad0: 76319MB (156301488 sectors), 155061 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA100 ad0: piomode=4 dmamode=2 udmamode=5 cblid=1 ad1: success setting UDMA5 on nVIDIA chip Creating DISK ad1 ar: FreeBSD check1 failed ad1: <WDC WD400BB-60BNA1/18.20D18> ATA-5 disk at ata0-slave ad1: 38166MB (78165360 sectors), 77545 C, 16 H, 63 S, 512 B ad1: 16 secs/int, 1 depth queue, UDMA100 ad1: piomode=4 dmamode=2 udmamode=5 cblid=1 [here it stops...] Thanks for your time. _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus
>Ok, so it does hang on the CD's channel. What were the results of booting >with the drive totally disconnected? >Scroll down in my previous message. It is after the cd boot. (It hangs just the same as it does with the cd drive connected)>I'd try to find a Windows-using friend and get that firmware updated if I >were you :) >Well... I suppose that is a good idea, but since it fails even with the cd drive completely disconnected, I do not believe it will help me with this problem. Thanks for your time. _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail
I've filed PR i386/69218 for this problem. Lee Harr wrote:> Wanting to test the -RC, I ran through the updating procedure this > evening, > but I am unable to boot the resulting kernel. The system hangs trying to > detect something with the disks... > > This is one of those troublesome nvidia chipset A7N8X motherboards. > > I do not have a serial console set up, but here are the last few lines of > a verbose boot... if I need to set up a serial line for more from the > verbose boot, let me know... I can easily post a regular dmesg from > my working kernel (built from March 5th sources) if that will help. > > (probe2:ata1:0:0:0): INQUIRY.CDB: 12 1 80 0 ff 0 > (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 > (probe2:ata1:0:0:0): Invalid field in CDB > (probe2:ata1:0:0:0): TEST UNIT READY.CDB: 0 0 0 0 0 0 > (probe2:ata1:0:0:0): NOT READY asc:3a,0 > (probe2:ata1:0:0:0): medium not present > (probe2:ata1:0:0:0): INQUIRY.CDB: 12 1 80 0 ff 0 > (probe2:ata1:0:0:0): ILLEGAL REQUEST asc:24,0 > (probe2:ata1:0:0:0): invalid field in CDB > > at this point it stops. > > _________________________________________________________________ > MSN 8 with e-mail virus protection service: 2 months FREE* > http://join.msn.com/?page=features/virus > > _______________________________________________ > freebsd-stable@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-stable > To unsubscribe, send any mail to "freebsd-stable-unsubscribe@freebsd.org"