freebsd stable - Apr 2004 - Micronet SP 2610/2612 10/100/1000 with FreeBSD 4.9 Stable :: Which driver to load?

Dear All

Hellow. Neither google nor the search facility in this list returned any 
answer. 

I am trying to install the Micronet SP 2610/2612 gigabit NIC. But it is not at 
all loaded. During boot, it goes like 

npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <ServerWorks host to PCI bridge(unknown chipset)> on motherboard
pci0: <PCI bus> on pcib0
pci0: <ATI Mach64-GR graphics accelerator> at 3.0
bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem
0xf6fe0000-0xf6f
effff irq 3 at device 4.0 on pci0
bge0: Ethernet address: 00:0e:7f:b4:24:79
miibus0: <MII bus> on bge0
brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX
-FDX, auto
pci0: <unknown card> (vendor=0x0e11, dev=0xa0f0) at 5.0 irq 5
ahc0: <Adaptec (Compaq OEM) 29160 Ultra160 SCSI adapter> port
0x2800-0x28ff mem
0xf6fc0000-0xf6fc0fff irq 10 at device 6.0 on pci0
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
pci0: <unknown card> (vendor=0x100b, dev=0x0022) at 8.0 irq 11
atapci0: <Generic PCI ATA controller> port
0x2000-0x200f,0x374-0x377,0x170-0x177
,0x3f4-0x3f7,0x1f0-0x1f7 at device 14.0 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
isab0: <PCI to ISA bridge (vendor=1166 device=0203)> at device 15.0 on
pci0
isa0: <ISA bus> on isab0


Please note, I have another NIC (inbuilt) that had been detected and configured

3. if I do a /stand/sysinstall, and try to configure the NIC, I see there is a 
          faith0 <unknown network interface type>
device attached to the system

Please advice as to get this card up and running.

Thanks


-------------------------------------------------
This mail sent through Virus Free Email:
http://www.vfemail.net

On Sat, Apr 03, 2004 at 04:11:33AM -0600, freebsd@vfemail.net
wrote:
> Dear All
> 
Please DO NOT cross-post!
> Hellow. Neither google nor the search facility in this list returned any 
> answer. 
> 
> I am trying to install the Micronet SP 2610/2612 gigabit NIC. But it is not
at
> all loaded. During boot, it goes like 
> 
[...]
> pci0: <unknown card> (vendor=0x100b, dev=0x0022) at 8.0 irq 11
According to the PCI database, this is the National Semiconductor
DP83820/1 10/100/1000 Gigabit Ethernet Adapter.  As such, it should
be supported by the nge(4) driver.

The reason why it's not detected during the initial installation
is because the GENERIC kernel doesn't include this driver [sic].

Just type ``ifconfig nge0'' under root, and the driver will be
loaded automatically.  You can then either put the following
line in your /boot/loader.conf file,

	nge_load="YES"

or compile a custom kernel which includes the nge(4) driver.


Cheers,
-- 
Ruslan Ermilov
ru@FreeBSD.org
FreeBSD committer
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url :
http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20040403/1c771d07/attachment.bin