Russell Sutherland
2008-Apr-10 13:49 UTC
[flashboot] Still searching for a stable OpenBSD 4.3 and flasboot branch.
I failed again today to get a fresh OpenBSD 4.3 source tree (using cvsup): *default host=cvsup.usa.openbsd.org *default base=/var *default prefix=/usr *default release=cvs *default delete use-rel-suffix compress OpenBSD-src tag=OPENBSD_4_3 and flashboot: (flashboot-SNAP-20080410.tar.gz) After a: # build-release.sh # build-largekernel.sh SOEKRIS4801 # build-diskimage.sh and moving the image to a CF card I get:>> OpenBSD/i386 BOOT 3.01- com0: 19200 baud switching console to com0 [ using 244856 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2008 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 4.3 (SOEKRIS4801.LARGE) #0: Thu Apr 10 09:00:56 EDT 2008 root at bureau10:/usr/local/src/flashboot/obj/SOEKRIS4801.LARGE cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133787648 (127MB) avail mem = 104435712 (99MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 20/80/03, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00 sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c2:3e:b0 nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c2:3e:b1 nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c2:3e:b2 nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00 "NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 1: <CF CARD 1GB> wd0: 1-sector PIO, LBA, 967MB, 1981728 sectors wd0(pciide0:0:1): using PIO mode 4, DMA mode 2 geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 revision 3 wdstatus 0 ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 11, version 1.0, legacy support isa0 at pcib0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio0 at nsclpcsio0: 29 pins gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Compaq OHCI root hub" rev 1.00/1.00 addr 1 biomask fbe5 netmask ffe5 ttymask ffe7 rd0: fixed, 40960 blocks root on rd0a swap on rd0b dump on rd0b panic: init died (signal 0, exit 4) Stopped at Debugger+0x4: leave RUN AT LEAST ''trace'' AND ''ps'' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb> ddb> trace Debugger(d556cecc,100,d556cf00,d02abd72,d0493440) at Debugger+0x4 panic(d0493440,0,4,d02b03d8,d4dce150) at panic+0x8b exit1(d4dcb000,400,1,0) at exit1+0x32 sys_exit(d4dcb000,d556cf58,d556cf50,d0402a75) at sys_exit+0x22 syscall() at syscall+0x1d3 --- syscall (number 1) --- 0x3f1b943: ddb> ps PID PPID PGRP UID S FLAGS WAIT COMMAND 13 0 0 0 3 0x100200 bored crypto 12 0 0 0 3 0x100200 aiodoned aiodoned 11 0 0 0 3 0x100200 syncer update 10 0 0 0 3 0x100200 cleaner cleaner 9 0 0 0 3 0x100200 reaper reaper 8 0 0 0 3 0x100200 pgdaemon pagedaemon 7 0 0 0 3 0x100200 pftm pfpurge 6 0 0 0 3 0x100200 usbtsk usbtask 5 0 0 0 3 0x100200 usbevt usb0 4 0 0 0 3 0x100200 bored syswq 3 0 0 0 3 0x100200 idle0 2 0 0 0 3 0x100200 kmalloc kmthread * 1 0 0 0 7 0x4000 init 0 -1 0 0 3 0x80200 scheduler swapper -- Russell Sutherland russ at quist.ca +1.416.696.7600
Stuart Henderson
2008-Apr-10 13:57 UTC
[flashboot] Still searching for a stable OpenBSD 4.3 and flasboot branch.
On 2008/04/10 09:49, Russell Sutherland wrote:> I failed again today to get a fresh OpenBSD 4.3 source tree > (using cvsup):What about the system you''re building on, is that also near enough 4.3? (i.e. filesets from around March 12 or so)
Sutherland Russell
2008-Apr-10 14:02 UTC
[flashboot] Still searching for a stable OpenBSD 4.3 and flasboot branch.
On Apr 10, 2008, at 9:57, Stuart Henderson wrote:> On 2008/04/10 09:49, Russell Sutherland wrote: >> I failed again today to get a fresh OpenBSD 4.3 source tree >> (using cvsup): > > What about the system you''re building on, is that also near > enough 4.3? (i.e. filesets from around March 12 or so) >I am building on a OpenBSD 4.3 system: bureau10# dmesg | more OpenBSD 4.3-current (GENERIC) #736: Fri Apr 4 17:28:40 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Xeon(TM) CPU 2.80GHz ("GenuineIntel" 686-class) 2.80 GHz cpu0: FPU ,V86 ,DE ,PSE ,TSC ,MSR ,PAE ,MCE ,CX8 ,APIC ,SEP ,MTRR ,PGE ,MCA ,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT- ID,xTPR real mem = 536350720 (511MB) avail mem = 510550016 (486MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 09/17/03, BIOS32 rev. 0 @ 0xfd7d1, SMBIOS rev. 2.3 @ 0xf6048 (42 entries) bios0: vendor IBM version "-[T2E127AUS-1.08]-" date 09/17/2003 bios0: IBM eserver xSeries 335 -[867611X]- acpi0 at bios0: rev 0 acpi0: tables DSDT FACP APIC ASF! acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0Data modified on freelist: word 0 of object 0xd117ba80 size 0x50 previous type free (0x0 != 0xefffeecc) : bus 1 (PCI1) acpiprt2 at acpi0: bus 2 (PCI2) acpicpu0 at acpi0 bios0: ROM list: 0xc0000/0x8000 0xc8000/0x1800 0xc9800/0x4000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x33 pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00 pchb2 at pci0 dev 0 function 2 "ServerWorks CNB20-HE Host (GC-LE)" rev 0x00 pci1 at pchb2 bus 1 mpi0 at pci1 dev 1 function 0 "Symbios Logic 53c1030" rev 0x07: irq 9 scsibus0 at mpi0: 16 targets sd0 at scsibus0 targ 0 lun 0: <IBM-ESXS, ST336607LC F, B25F> SCSI3 0/ direct fixed sd0: 34715MB, 49855 cyl, 2 head, 713 sec, 512 bytes/sec, 71096640 sec total mpi0: target 0 Sync at 80MHz width 16bit offset 63 QAS 0 DT 1 IU 0 vga1 at pci0 dev 1 function 0 "ATI Rage XL" rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) piixpm0 at pci0 dev 15 function 0 "ServerWorks CSB5" rev 0x93: polling iic0 at piixpm0 spdmem0 at iic0 addr 0x50: 256MB DDR SDRAM registered ECC PC2300CL2.5 spdmem1 at iic0 addr 0x52: 256MB DDR SDRAM registered ECC PC2300CL2.5 pciide0 at pci0 dev 15 function 1 "ServerWorks CSB5 IDE" rev 0x93: DMA atapiscsi0 at pciide0 channel 1 drive 0 scsibus1 at atapiscsi0: 2 targets cd0 at scsibus1 targ 0 lun 0: <LG, CD-ROM CRN-8245B, 1.16> SCSI0 5/ cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x05: irq 11, version 1.0, legacy support pcib0 at pci0 dev 15 function 3 "ServerWorks CSB5 LPC" rev 0x00 pchb3 at pci0 dev 17 function 0 "ServerWorks CIOB-X2 PCIX" rev 0x05 pchb4 at pci0 dev 17 function 2 "ServerWorks CIOB-X2 PCIX" rev 0x05 pci2 at pchb4 bus 2 bge0 at pci2 dev 1 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2 (0x1002): irq 3, address 00:0d:60:1c:ab:42 brgphy0 at bge0 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 bge1 at pci2 dev 2 function 0 "Broadcom BCM5703X" rev 0x02, BCM5703 A2 (0x1002): irq 5, address 00:0d:60:1c:ab:43 brgphy1 at bge1 phy 1: BCM5703 10/100/1000baseT PHY, rev. 2 usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "ServerWorks OHCI root hub" rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: <PC speaker> spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask ff45 netmask ff6d ttymask ffef mtrr: Pentium Pro MTRR support uhub1 at uhub0 port 3 "Dell Dell USB Keyboard Hub" rev 1.10/2.00 addr 2 uhidev0 at uhub1 port 1 configuration 1 interface 0 "Dell Dell USB Keyboard" rev 1.10/2.00 addr 3 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub1 port 1 configuration 1 interface 1 "Dell Dell USB Keyboard" rev 1.10/2.00 addr 3 uhidev1: iclass 3/0, 3 report ids uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0 uhid1 at uhidev1 reportid 2: input=1, output=0, feature=0 uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0 softraid0 at root root on sd0a swap on sd0b dump on sd0b wskbd1: disconnecting from wsdisplay0 wskbd1 detached ukbd0 detached uhidev0 detached uhid0 detached uhid1 detached uhid2 detached uhidev1 detached uhub1 detached --- Russell P. Sutherland Email: russ @ madhaus.cns.utoronto.ca 4 Bancroft Ave., Rm. 102 Voice: +1.416.978.0470 University of Toronto Fax: +1.416.978.6620 Toronto, ON M5S 1C1 WWW: http://madhaus.cns.utoronto.ca/~russ CANADA
Stuart Henderson
2008-Apr-10 16:36 UTC
[flashboot] Still searching for a stable OpenBSD 4.3 and flasboot branch.
On 2008/04/10 10:02, Sutherland Russell wrote:> > On Apr 10, 2008, at 9:57, Stuart Henderson wrote: > >> On 2008/04/10 09:49, Russell Sutherland wrote: >>> I failed again today to get a fresh OpenBSD 4.3 source tree >>> (using cvsup): >> >> What about the system you''re building on, is that also near >> enough 4.3? (i.e. filesets from around March 12 or so) >> > > I am building on a OpenBSD 4.3 system: > > bureau10# dmesg | more > OpenBSD 4.3-current (GENERIC) #736: Fri Apr 4 17:28:40 MDT 2008 > deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERICThat may be too new, -current is past 4.3 now, I''m not sure if you can reliably build 4.3 on it.
Jason George
2008-Apr-10 17:47 UTC
[flashboot] Still searching for a stable OpenBSD 4.3 and flasboot branch.
On Thu, 10 Apr 2008, Stuart Henderson wrote:> On 2008/04/10 10:02, Sutherland Russell wrote: >> >> On Apr 10, 2008, at 9:57, Stuart Henderson wrote: >> >>> On 2008/04/10 09:49, Russell Sutherland wrote: >>>> I failed again today to get a fresh OpenBSD 4.3 source tree >>>> (using cvsup): >>> >>> What about the system you''re building on, is that also near >>> enough 4.3? (i.e. filesets from around March 12 or so) >>> >> >> I am building on a OpenBSD 4.3 system: >> >> bureau10# dmesg | more >> OpenBSD 4.3-current (GENERIC) #736: Fri Apr 4 17:28:40 MDT 2008 >> deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC > > That may be too new, -current is past 4.3 now, I''m not sure if you > can reliably build 4.3 on it.I can build flashboot using the April 9 snapshot on the build machine along with a checkout of the April 9 current source tree. Something must have become slightly de-synchronized with the sources and builds in the time period that Russell and I tried and failed to get things working. build system: OpenBSD 4.3-current (GENERIC) #799: Wed Apr 9 12:04:26 MDT 2008 deraadt at i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC target system: OpenBSD 4.3-current (SOEKRIS4801) #0: Thu Apr 10 11:30:03 MDT 2008 jbg at embedded:/v00/embedded/flashboot-20080410/obj/SOEKRIS4801 cpu0: Geode(TM) Integrated Processor by National Semi ("Geode by NSC" 586-class) 267 MHz cpu0: FPU,TSC,MSR,CX8,CMOV,MMX cpu0: TSC disabled real mem = 133787648 (127MB) avail mem = 109588480 (104MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 20/40/21, BIOS32 rev. 0 @ 0xf7840 pcibios0 at bios0: rev 2.0 @ 0xf0000/0x10000 pcibios0: pcibios_get_intr_routing - function not supported pcibios0: PCI IRQ Routing information unavailable. pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc8000/0x9000 cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 "Cyrix GXm PCI" rev 0x00 sis0 at pci0 dev 6 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:5c:bc nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1 sis1 at pci0 dev 7 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:5c:bd nsphyter1 at sis1 phy 0: DP83815 10/100 PHY, rev. 1 sis2 at pci0 dev 8 function 0 "NS DP83815 10/100" rev 0x00, DP83816A: irq 10, address 00:00:24:c3:5c:be nsphyter2 at sis2 phy 0: DP83815 10/100 PHY, rev. 1 ral0 at pci0 dev 14 function 0 "Ralink RT2560" rev 0x01: irq 11, address 00:11:09:0b:86:0d ral0: MAC/BBP RT2560 (rev 0x04), RF RT2525 pcib0 at pci0 dev 18 function 0 "NS SC1100 ISA" rev 0x00 "NS SC1100 SMI" rev 0x00 at pci0 dev 18 function 1 not configured pciide0 at pci0 dev 18 function 2 "NS SCx200 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: <Hitachi Flash Card> wd0: 1-sector PIO, LBA, 122MB, 250368 sectors wd0(pciide0:0:0): using PIO mode 2 geodesc0 at pci0 dev 18 function 5 "NS SC1100 X-Bus" rev 0x00: iid 6 revision 3 wdstatus 0 ohci0 at pci0 dev 19 function 0 "Compaq USB OpenHost" rev 0x08: irq 5, version 1.0, legacy support isa0 at pcib0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard nsclpcsio0 at isa0 port 0x2e/2: NSC PC87366 rev 9: GPIO VLM TMS gpio0 at nsclpcsio0: 29 pins gscsio0 at isa0 port 0x15c/2: SC1100 SIO rev 1: npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo usb0 at ohci0: USB revision 1.0 uhub0 at usb0 "Compaq OHCI root hub" rev 1.00/1.00 addr 1 biomask f3e5 netmask ffe5 ttymask ffe7 rd0: fixed, 30720 blocks root on rd0a swap on rd0b dump on rd0b