After installing domu and rebooting, I get the following errors: rtc:IRQ 8 is not free and i8042.c: No controller found. Going to boot Fedora Core (2.6.18-1.2798.fc6xen) kernel: /vmlinuz-2.6.18-1.2798.fc6xen initrd: /initrd-2.6.18-1.2798.fc6xen.img Started domain xenbox1 rtc: IRQ 8 is not free. i8042.c: No controller found. I searched the manual and the mailing lists. The mailing lists made reference to networking. network shows type: bridge source:xenbr0 and a MAC address i assigned domu a static IP during setup. I can get domu running using xm create -c xenbox1, but i get the above errors and can not get console. I''m curently at a loss for how to manage the virtual server. 12/03/2007 11:06:06 Autoprobing TCP port 12/03/2007 11:06:06 Failure autoprobing: Cannot assign requested address 12/03/2007 12:40:22 Autoprobing TCP port 12/03/2007 12:40:22 Failure autoprobing: Cannot assign requested address Nothing to flush. Link veth0 is missing. This may be because you have reached the limit of the number of interfaces that the loopback driver supports. If the loopback driver is a module, you may raise this limit by passing it as a parameter (nloopbacks=<N>); if the driver is compiled statically into the kernel, then you may set the parameter using loopback.nloopbacks=<N> on the domain 0 kernel command line. I do have iputils and iproute installed. Any help would be greatly appreciated. Thanks, Craig