AndreGround
2007-Jan-17 10:32 UTC
[Fedora-xen] Unable to start a FC3 domU under FC6 using Fedora bundled Xen packages
Hi, this is the error I get when I try to start my FC3 domU. exec of init (/sbin/init) failed!!!: No such file or directory Kernel panic - not syncing: Attempted to kill init! I can share any config if you need to check something. Any help/idea is *REALLY* appreciated. Thanks in advance, Andrea
AndreGround
2007-Jan-18 10:01 UTC
Re: [Fedora-xen] Unable to start a FC3 domU under FC6 using Fedora bundled Xen packages
Andrew, Ninny, thanks a lot for your reply! I''m collecting data (configurations and logs) from different tests I''ve made and then I''ll post everything in order to let you better analyze my issue. Thanks again, Andrea On 1/18/07, ninny issac <ninyissac@gmail.com> wrote:> Hi, > The error is probably due to incorrect root partition for your guest domain. > The kernel will start /sbin/init after mounting the root partion. > Could you provide more details like what is the root partion for FC3 domU , > whether it is a partition or file and also your configuration file for domU, > so people can easily figure it out. > > > > > On 1/17/07, AndreGround <andreground@gmail.com > wrote: > > > > Hi, > > this is the error I get when I try to start my FC3 domU. > > > > exec of init (/sbin/init) failed!!!: No such file or directory > > Kernel panic - not syncing: Attempted to kill init! > > > > I can share any config if you need to check something. > > > > Any help/idea is *REALLY* appreciated. > > > > Thanks in advance, > > Andrea > > > > -- > > Fedora-xen mailing list > > Fedora-xen@redhat.com > > https://www.redhat.com/mailman/listinfo/fedora-xen > > > >
AndreGround
2007-Jan-18 14:34 UTC
Re: [Fedora-xen] Unable to start a FC3 domU under FC6 using Fedora bundled Xen packages
Hi,
here are all my config files & logs taken from my test:
Please note that the kernel used is the one provided by Fedora RPM Packages.
The initrd (initrd-2.6.18-1.2869.fc6xenU.img) has been generated using
the mkinitrd syntax listed below.
- Test 1)
Xen config file:
#kernel ="/boot/vmlinuz-2.6.18-1.2869.fc6xen"
#ramdisk = "/boot/initrd-2.6.18-1.2869.fc6xenU.img"
memory = 256
name = "mail"
bootloader="/usr/bin/pygrub"
#vif = [''mac=aa:00:00:00:00:01'']
disk =
[''tap:aio:/xen/mail/fedora.img,xvda1,w'',''tap:aio:/xen/mail/swap1.img,xvda2,w'']
#root = "/dev/sda1 ro"
#extra = "ro selinux=0 3"
DomU grub:
title Fedora Core 3
root (hd0,0)
kernel /boot/vmlinuz-2.6.18-1.2869.fc6xen root=/dev/xvda1
initrd /boot/initrd-2.6.18-1.2869.fc6xenU.img
DomU fstab:
# This file is edited by fstab-sync - see ''man fstab-sync'' for
details
/dev/xvda1 / ext3 defaults 1 1
none /dev/pts devpts gid=5,mode=620 0 0
none /dev/shm tmpfs defaults 0 0
none /proc proc defaults 0 0
none /sys sysfs defaults 0 0
/dev/xvda2 swap swap defaults 0 0
Initrd creation script:
mkinitrd -f --with=xennet --preload=xenblk
/xen/mnt/boot/initrd-2.6.18-1.2869.fc6xenU.img
--fstab=/xen/mnt/etc/fstab 2.6.18-1.2869.fc6xen
Initrd:
[root@hulk initrd]# cat init
#!/bin/nash
mount -t proc /proc /proc
setquiet
echo Mounting proc filesystem
echo Mounting sysfs filesystem
mount -t sysfs /sys /sys
echo Creating /dev
mount -o mode=0755 -t tmpfs /dev /dev
mkdir /dev/pts
mount -t devpts -o gid=5,mode=620 /dev/pts /dev/pts
mkdir /dev/shm
mkdir /dev/mapper
echo Creating initial device nodes
mknod /dev/null c 1 3
mknod /dev/zero c 1 5
mknod /dev/systty c 4 0
mknod /dev/tty c 5 0
mknod /dev/console c 5 1
mknod /dev/ptmx c 5 2
mknod /dev/rtc c 10 135
mknod /dev/tty0 c 4 0
mknod /dev/tty1 c 4 1
mknod /dev/tty2 c 4 2
mknod /dev/tty3 c 4 3
mknod /dev/tty4 c 4 4
mknod /dev/tty5 c 4 5
mknod /dev/tty6 c 4 6
mknod /dev/tty7 c 4 7
mknod /dev/tty8 c 4 8
mknod /dev/tty9 c 4 9
mknod /dev/tty10 c 4 10
mknod /dev/tty11 c 4 11
mknod /dev/tty12 c 4 12
mknod /dev/ttyS0 c 4 64
mknod /dev/ttyS1 c 4 65
mknod /dev/ttyS2 c 4 66
mknod /dev/ttyS3 c 4 67
echo Setting up hotplug.
hotplug
echo Creating block device nodes.
mkblkdevs
echo "Loading xenblk.ko module"
insmod /lib/xenblk.ko
echo "Loading uhci-hcd.ko module"
insmod /lib/uhci-hcd.ko
echo "Loading ohci-hcd.ko module"
insmod /lib/ohci-hcd.ko
echo "Loading ehci-hcd.ko module"
insmod /lib/ehci-hcd.ko
mount -t usbfs /proc/bus/usb /proc/bus/usb
echo "Loading jbd.ko module"
insmod /lib/jbd.ko
echo "Loading ext3.ko module"
insmod /lib/ext3.ko
echo "Loading scsi_mod.ko module"
insmod /lib/scsi_mod.ko
echo "Loading sd_mod.ko module"
insmod /lib/sd_mod.ko
echo "Loading 3w-xxxx.ko module"
insmod /lib/3w-xxxx.ko
echo "Loading xennet.ko module"
insmod /lib/xennet.ko
mkblkdevs
resume /dev/xvda2
echo Creating root device.
mkrootdev -t ext3 -o defaults,ro /dev/xvda1
echo Mounting root filesystem.
mount /sysroot
echo Setting up other filesystems.
setuproot
echo Switching to new root and running init.
switchroot
Result:
exec of init (/sbin/init) failed!!!: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
Log:
[root@hulk ~]# xm create -c mail
Using config file "/etc/xen/mail".
Going to boot Fedora Core 3
kernel: /boot/vmlinuz-2.6.18-1.2869.fc6xen
initrd: /boot/initrd-2.6.18-1.2869.fc6xenU.img
Started domain mail
Linux version 2.6.18-1.2869.fc6xen
(brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20061011
(Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 15:28:06 EST 2006
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/xvda1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c078b000 soft=c076b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1800.059 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000
Memory: 250940k/270336k available (2099k kernel code, 10876k reserved,
842k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4503.36 BogoMIPS (lpj=9006734)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Checking ''hlt'' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3324k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1169130101.084:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1E0E64C0A8BD9F26
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Linux version 2.6.18-1.2869.fc6xen
(brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20061011
(Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 15:28:06 EST 2006
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 0000000010800000 (usable)
0MB HIGHMEM available.
264MB LOWMEM available.
Using x86 segment limits to approximate NX protection
ACPI in unprivileged domain disabled
Built 1 zonelists. Total pages: 67584
Kernel command line: root=/dev/xvda1
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c078b000 soft=c076b000
PID hash table entries: 2048 (order: 11, 8192 bytes)
Xen reported: 1800.059 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Software IO TLB disabled
vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000
Memory: 250940k/270336k available (2099k kernel code, 10876k reserved,
842k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4503.36 BogoMIPS (lpj=9006734)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Checking ''hlt'' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Brought up 1 CPUs
checking if image is initramfs... it is
Freeing initrd memory: 3324k freed
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 6, 327680 bytes)
TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
audit: initializing netlink socket (disabled)
audit(1169130101.084:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 1E0E64C0A8BD9F26
- User ID: Red Hat, Inc. (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver libusual
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
XENBUS: Device with no driver: device/vbd/51713
XENBUS: Device with no driver: device/vbd/51714
Freeing unused kernel memory: 180k freed
Write protecting the kernel read-only data: 357k
Red Hat nash version 5.1.19.0.2 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading xenblk.ko module
Registering block device major 202
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading ohci-hcd.ko module
Loading ehci-hcd.ko module
Loading jbd.ko module
Loading ext3.ko module
Loading scsi_mod.ko module
SCSI subsystem initialized
Loading sd_mod.ko module
Loading 3w-xxxx.ko module
3ware Storage Controller device driver for Linux v1.26.02.001.
Loading xennet.ko module
netfront: Initialising virtual ethernet driver.
Creating root device.
Mounting root filesystem.
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Setting up other filesystems.
Setting up new root fs
no fstab.sys, mounting internal defaults
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
exec of init (/sbin/init) failed!!!: No such file or directory
Kernel panic - not syncing: Attempted to kill init!
Other test reports will follow.
Let me have your thoughts.
Thanks in advance,
Andrea Maurizio Gnerre
On 1/18/07, AndreGround <andreground@gmail.com>
wrote:> Andrew, Ninny,
> thanks a lot for your reply!
>
> I''m collecting data (configurations and logs) from different tests
> I''ve made and then I''ll post everything in order to let
you better
> analyze my issue.
>
> Thanks again,
> Andrea
>
> On 1/18/07, ninny issac <ninyissac@gmail.com> wrote:
> > Hi,
> > The error is probably due to incorrect root partition for your guest
domain.
> > The kernel will start /sbin/init after mounting the root partion.
> > Could you provide more details like what is the root partion for FC3
domU ,
> > whether it is a partition or file and also your configuration file for
domU,
> > so people can easily figure it out.
> >
> >
> >
> >
> > On 1/17/07, AndreGround <andreground@gmail.com > wrote:
> > >
> > > Hi,
> > > this is the error I get when I try to start my FC3 domU.
> > >
> > > exec of init (/sbin/init) failed!!!: No such file or directory
> > > Kernel panic - not syncing: Attempted to kill init!
> > >
> > > I can share any config if you need to check something.
> > >
> > > Any help/idea is *REALLY* appreciated.
> > >
> > > Thanks in advance,
> > > Andrea
> > >
> > > --
> > > Fedora-xen mailing list
> > > Fedora-xen@redhat.com
> > > https://www.redhat.com/mailman/listinfo/fedora-xen
> > >
> >
> >
>
AndreGround
2007-Jan-26 12:44 UTC
Re: [Fedora-xen] Unable to start a FC3 domU under FC6 using Fedora bundled Xen packages
Hi Ninny, thanks for your help. Here''s what I get without using the initrd: VFS: Cannot open root device "sda1" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Please let me have your considerations. Thanks again, Andrea On 1/25/07, ninny issac <ninyissac@gmail.com> wrote:> Hi, > Could you try to use sda1/sda2 instead of xvda1/2. > ie, disk > [''tap:aio:/xen/mail/fedora.img,sda1,w'',''tap:aio:/xen/mail/swap1.img,sda2,w''] > Also can you comment out the initrd line from DomU grub: > title Fedora Core 3 > root (hd0,0) > kernel /boot/vmlinuz-2.6.18-1.2869.fc6xen root=/dev/sda1 > # initrd /boot/initrd-2.6.18-1.2869.fc6xenU.img > > The error says that kernel could not find /sbin/init , so just try with the > above configuration. > > > > > > On 1/18/07, AndreGround <andreground@gmail.com> wrote: > > Hi, > > here are all my config files & logs taken from my test: > > > > Please note that the kernel used is the one provided by Fedora RPM > Packages. > > The initrd (initrd-2.6.18-1.2869.fc6xenU.img) has been > generated using > > the mkinitrd syntax listed below. > > > > - Test 1) > > > > Xen config file: > > #kernel ="/boot/vmlinuz-2.6.18-1.2869.fc6xen" > > #ramdisk = "/boot/initrd-2.6.18-1.2869.fc6xenU.img" > > memory = 256 > > name = "mail" > > bootloader="/usr/bin/pygrub" > > #vif = [''mac=aa:00:00:00:00:01''] > > disk > [''tap:aio:/xen/mail/fedora.img,xvda1,w'',''tap:aio:/xen/mail/swap1.img,xvda2,w''] > > #root = "/dev/sda1 ro" > > #extra = "ro selinux=0 3" > > > > DomU grub: > > title Fedora Core 3 > > root (hd0,0) > > kernel /boot/vmlinuz-2.6.18-1.2869.fc6xen root=/dev/xvda1 > > initrd /boot/initrd-2.6.18-1.2869.fc6xenU.img > > > > DomU fstab: > > # This file is edited by fstab-sync - see ''man fstab-sync'' for details > > /dev/xvda1 / ext3 > defaults 1 1 > > none /dev/pts devpts > gid=5,mode=620 0 0 > > none /dev/shm tmpfs > defaults 0 0 > > none /proc proc > defaults 0 0 > > none /sys sysfs > defaults 0 0 > > /dev/xvda2 swap swap > defaults 0 0 > > > > Initrd creation script: > > mkinitrd -f --with=xennet --preload=xenblk > > /xen/mnt/boot/initrd-2.6.18-1.2869.fc6xenU.img > > --fstab=/xen/mnt/etc/fstab 2.6.18-1.2869.fc6xen > > > > Initrd: > > [root@hulk initrd]# cat init > > #!/bin/nash > > > > mount -t proc /proc /proc > > setquiet > > echo Mounting proc filesystem > > echo Mounting sysfs filesystem > > mount -t sysfs /sys /sys > > echo Creating /dev > > mount -o mode=0755 -t tmpfs /dev /dev > > mkdir /dev/pts > > mount -t devpts -o gid=5,mode=620 /dev/pts /dev/pts > > mkdir /dev/shm > > mkdir /dev/mapper > > echo Creating initial device nodes > > mknod /dev/null c 1 3 > > mknod /dev/zero c 1 5 > > mknod /dev/systty c 4 0 > > mknod /dev/tty c 5 0 > > mknod /dev/console c 5 1 > > mknod /dev/ptmx c 5 2 > > mknod /dev/rtc c 10 135 > > mknod /dev/tty0 c 4 0 > > mknod /dev/tty1 c 4 1 > > mknod /dev/tty2 c 4 2 > > mknod /dev/tty3 c 4 3 > > mknod /dev/tty4 c 4 4 > > mknod /dev/tty5 c 4 5 > > mknod /dev/tty6 c 4 6 > > mknod /dev/tty7 c 4 7 > > mknod /dev/tty8 c 4 8 > > mknod /dev/tty9 c 4 9 > > mknod /dev/tty10 c 4 10 > > mknod /dev/tty11 c 4 11 > > mknod /dev/tty12 c 4 12 > > mknod /dev/ttyS0 c 4 64 > > mknod /dev/ttyS1 c 4 65 > > mknod /dev/ttyS2 c 4 66 > > mknod /dev/ttyS3 c 4 67 > > echo Setting up hotplug. > > hotplug > > echo Creating block device nodes. > > mkblkdevs > > echo "Loading xenblk.ko module" > > insmod /lib/xenblk.ko > > echo "Loading uhci-hcd.ko module" > > insmod /lib/uhci-hcd.ko > > echo "Loading ohci-hcd.ko module" > > insmod /lib/ohci-hcd.ko > > echo "Loading ehci-hcd.ko module" > > insmod /lib/ehci-hcd.ko > > mount -t usbfs /proc/bus/usb /proc/bus/usb > > echo "Loading jbd.ko module" > > insmod /lib/jbd.ko > > echo "Loading ext3.ko module" > > insmod /lib/ext3.ko > > echo "Loading scsi_mod.ko module" > > insmod /lib/scsi_mod.ko > > echo "Loading sd_mod.ko module" > > insmod /lib/sd_mod.ko > > echo "Loading 3w-xxxx.ko module" > > insmod /lib/3w- xxxx.ko > > echo "Loading xennet.ko module" > > insmod /lib/xennet.ko > > mkblkdevs > > resume /dev/xvda2 > > echo Creating root device. > > mkrootdev -t ext3 -o defaults,ro /dev/xvda1 > > echo Mounting root filesystem. > > mount /sysroot > > echo Setting up other filesystems. > > setuproot > > echo Switching to new root and running init. > > switchroot > > > > Result: > > exec of init (/sbin/init) failed!!!: No such file or directory > > Kernel panic - not syncing: Attempted to kill init! > > > > Log: > > [root@hulk ~]# xm create -c mail > > Using config file "/etc/xen/mail". > > Going to boot Fedora Core 3 > > kernel: /boot/vmlinuz-2.6.18-1.2869.fc6xen > > initrd: /boot/initrd-2.6.18-1.2869.fc6xenU.img > > Started domain mail > > Linux version 2.6.18-1.2869.fc6xen > > (brewbuilder@ls20-bc2-14.build.redhat.com ) (gcc version > 4.1.1 20061011 > > (Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 15:28:06 EST 2006 > > BIOS-provided physical RAM map: > > Xen: 0000000000000000 - 0000000010800000 (usable) > > 0MB HIGHMEM available. > > 264MB LOWMEM available. > > Using x86 segment limits to approximate NX protection > > ACPI in unprivileged domain disabled > > Built 1 zonelists. Total pages: 67584 > > Kernel command line: root=/dev/xvda1 > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Initializing CPU#0 > > CPU 0 irqstacks, hard=c078b000 soft=c076b000 > > PID hash table entries: 2048 (order: 11, 8192 bytes) > > Xen reported: 1800.059 MHz processor. > > Console: colour dummy device 80x25 > > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > > Software IO TLB disabled > > vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000 > > Memory: 250940k/270336k available (2099k kernel code, 10876k reserved, > > 842k data, 180k init, 0k highmem) > > Checking if this processor honours the WP bit even in supervisor mode... > Ok. > > Calibrating delay using timer specific routine.. 4503.36 BogoMIPS > (lpj=9006734) > > Security Framework v1.0.0 initialized > > SELinux: Initializing. > > SELinux: Starting in permissive mode > > selinux_register_security: Registering secondary module > capability > > Capability LSM initialized as secondary > > Mount-cache hash table entries: 512 > > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > > CPU: L2 Cache: 256K (64 bytes/line) > > Checking ''hlt'' instruction... OK. > > SMP alternatives: switching to UP code > > Freeing SMP alternatives: 12k freed > > Brought up 1 CPUs > > checking if image is initramfs... it is > > Freeing initrd memory: 3324k freed > > Grant table initialized > > NET: Registered protocol family 16 > > Brought up 1 CPUs > > PCI: setting up Xen PCI frontend stub > > ACPI: Interpreter disabled. > > Linux Plug and Play Support v0.97 (c) Adam Belay > > pnp: PnP ACPI: disabled > > xen_mem: Initialising balloon driver. > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > PCI: System does not support PCI > > PCI: System does not support PCI > > NetLabel: Initializing > > NetLabel: domain hash size = 128 > > NetLabel: protocols = UNLABELED CIPSOv4 > > NetLabel: unlabeled traffic allowed by default > > NET: Registered protocol family 2 > > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > > TCP established hash table entries: 16384 (order: 6, 327680 bytes) > > TCP bind hash table entries: 8192 (order: 5, 163840 bytes) > > TCP: Hash tables configured (established 16384 bind 8192) > > TCP reno registered > > IA-32 Microcode Update Driver: v1.14-xen < tigran@veritas.com> > > audit: initializing netlink socket (disabled) > > audit(1169130101.084:1): initialized > > VFS: Disk quotas dquot_6.5.1 > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > SELinux: Registering netfilter hooks > > Initializing Cryptographic API > > ksign: Installing public key data > > Loading keyring > > - Added public key 1E0E64C0A8BD9F26 > > - User ID: Red Hat, Inc. (Kernel Module GPG key) > > io scheduler noop registered > > io scheduler anticipatory registered > > io scheduler deadline registered > > io scheduler cfq registered (default) > > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > > rtc: IRQ 8 is not free. > > Non-volatile memory driver v1.2 > > Linux agpgart interface v0.101 (c) Dave Jones > > RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize > > Xen virtual console successfully installed as xvc0 > > Linux version 2.6.18-1.2869.fc6xen > > ( brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version > 4.1.1 20061011 > > (Red Hat 4.1.1-30)) #1 SMP Wed Dec 20 15:28:06 EST 2006 > > BIOS-provided physical RAM map: > > Xen: 0000000000000000 - 0000000010800000 (usable) > > 0MB HIGHMEM available. > > 264MB LOWMEM available. > > Using x86 segment limits to approximate NX protection > > ACPI in unprivileged domain disabled > > Built 1 zonelists. Total pages: 67584 > > Kernel command line: root=/dev/xvda1 > > Enabling fast FPU save and restore... done. > > Enabling unmasked SIMD FPU exception support... done. > > Initializing CPU#0 > > CPU 0 irqstacks, hard=c078b000 soft=c076b000 > > PID hash table entries: 2048 (order: 11, 8192 bytes) > > Xen reported: 1800.059 MHz processor. > > Console: colour dummy device 80x25 > > Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) > > Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) > > Software IO TLB disabled > > vmalloc area: d1000000-f4ffe000, maxmem 2d7fe000 > > Memory: 250940k/270336k available (2099k kernel code, 10876k reserved, > > 842k data, 180k init, 0k highmem) > > Checking if this processor honours the WP bit even in supervisor mode... > Ok. > > Calibrating delay using timer specific routine.. 4503.36 BogoMIPS > (lpj=9006734) > > Security Framework v1.0.0 initialized > > SELinux: Initializing. > > SELinux: Starting in permissive mode > > selinux_register_security: Registering secondary module > capability > > Capability LSM initialized as secondary > > Mount-cache hash table entries: 512 > > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > > CPU: L2 Cache: 256K (64 bytes/line) > > Checking ''hlt'' instruction... OK. > > SMP alternatives: switching to UP code > > Freeing SMP alternatives: 12k freed > > Brought up 1 CPUs > > checking if image is initramfs... it is > > Freeing initrd memory: 3324k freed > > Grant table initialized > > NET: Registered protocol family 16 > > Brought up 1 CPUs > > PCI: setting up Xen PCI frontend stub > > ACPI: Interpreter disabled. > > Linux Plug and Play Support v0.97 (c) Adam Belay > > pnp: PnP ACPI: disabled > > xen_mem: Initialising balloon driver. > > usbcore: registered new driver usbfs > > usbcore: registered new driver hub > > PCI: System does not support PCI > > PCI: System does not support PCI > > NetLabel: Initializing > > NetLabel: domain hash size = 128 > > NetLabel: protocols = UNLABELED CIPSOv4 > > NetLabel: unlabeled traffic allowed by default > > NET: Registered protocol family 2 > > IP route cache hash table entries: 4096 (order: 2, 16384 bytes) > > TCP established hash table entries: 16384 (order: 6, 327680 bytes) > > TCP bind hash table entries: 8192 (order: 5, 163840 bytes) > > TCP: Hash tables configured (established 16384 bind 8192) > > TCP reno registered > > IA-32 Microcode Update Driver: v1.14-xen < tigran@veritas.com> > > audit: initializing netlink socket (disabled) > > audit(1169130101.084:1): initialized > > VFS: Disk quotas dquot_6.5.1 > > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > > SELinux: Registering netfilter hooks > > Initializing Cryptographic API > > ksign: Installing public key data > > Loading keyring > > - Added public key 1E0E64C0A8BD9F26 > > - User ID: Red Hat, Inc. (Kernel Module GPG key) > > io scheduler noop registered > > io scheduler anticipatory registered > > io scheduler deadline registered > > io scheduler cfq registered (default) > > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > > rtc: IRQ 8 is not free. > > Non-volatile memory driver v1.2 > > Linux agpgart interface v0.101 (c) Dave Jones > > RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize > > Xen virtual console successfully installed as xvc0 > > Event-channel device installed. > > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > > ide: Assuming 50MHz system bus speed for PIO modes; override with > idebus=xx > > ide-floppy driver 0.99.newide > > usbcore: registered new driver libusual > > usbcore: registered new driver hiddev > > usbcore: registered new driver usbhid > > drivers/usb/input/hid-core.c: v2.6:USB HID core driver > > PNP: No PS/2 controller found. Probing ports directly. > > i8042.c: No controller found. > > mice: PS/2 mouse device common for all mice > > md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 > > md: bitmap version 4.39 > > TCP bic registered > > Initializing IPsec netlink socket > > NET: Registered protocol family 1 > > NET: Registered protocol family 17 > > Using IPI No-Shortcut mode > > XENBUS: Device with no driver: device/vbd/51713 > > XENBUS: Device with no driver: device/vbd/51714 > > Freeing unused kernel memory: 180k freed > > Write protecting the kernel read-only data: 357k > > Red Hat nash version 5.1.19.0.2 starting > > Mounting proc filesystem > > Mounting sysfs filesystem > > Creating /dev > > Creating initial device nodes > > Setting up hotplug. > > Creating block device nodes. > > Loading xenblk.ko module > > Registering block device major 202 > > Loading uhci-hcd.ko module > > USB Universal Host Controller Interface driver v3.0 > > Loading ohci-hcd.ko module > > Loading ehci-hcd.ko module > > Loading jbd.ko module > > Loading ext3.ko module > > Loading scsi_mod.ko module > > SCSI subsystem initialized > > Loading sd_mod.ko module > > Loading 3w-xxxx.ko module > > 3ware Storage Controller device driver for Linux v1.26.02.001. > > Loading xennet.ko module > > netfront: Initialising virtual ethernet driver. > > Creating root device. > > Mounting root filesystem. > > EXT3-fs: INFO: recovery required on readonly filesystem. > > EXT3-fs: write access will be enabled during recovery. > > kjournald starting. Commit interval 5 seconds > > EXT3-fs: recovery complete. > > EXT3-fs: mounted filesystem with ordered data mode. > > Setting up other filesystems. > > Setting up new root fs > > no fstab.sys, mounting internal defaults > > Switching to new root and running init. > > unmounting old /dev > > unmounting old /proc > > unmounting old /sys > > exec of init (/sbin/init) failed!!!: No such file or directory > > Kernel panic - not syncing: Attempted to kill init! > > > > Other test reports will follow. > > > > Let me have your thoughts. > > > > Thanks in advance, > > Andrea Maurizio Gnerre > > > > On 1/18/07, AndreGround <andreground@gmail.com > wrote: > > > Andrew, Ninny, > > > thanks a lot for your reply! > > > > > > I''m collecting data (configurations and logs) from different tests > > > I''ve made and then I''ll post everything in order to let you better > > > analyze my issue. > > > > > > Thanks again, > > > Andrea > > > > > > On 1/18/07, ninny issac <ninyissac@gmail.com> wrote: > > > > Hi, > > > > The error is probably due to incorrect root partition for your guest > domain. > > > > The kernel will start /sbin/init after mounting the root partion. > > > > Could you provide more details like what is the root partion for FC3 > domU , > > > > whether it is a partition or file and also your configuration file for > domU, > > > > so people can easily figure it out. > > > > > > > > > > > > > > > > > > > > On 1/17/07, AndreGround < andreground@gmail.com > wrote: > > > > > > > > > > Hi, > > > > > this is the error I get when I try to start my FC3 domU. > > > > > > > > > > exec of init (/sbin/init) failed!!!: No such file or directory > > > > > Kernel panic - not syncing: Attempted to kill init! > > > > > > > > > > I can share any config if you need to check something. > > > > > > > > > > Any help/idea is *REALLY* appreciated. > > > > > > > > > > Thanks in advance, > > > > > Andrea > > > > > > > > > > -- > > > > > Fedora-xen mailing list > > > > > Fedora-xen@redhat.com > > > > > https://www.redhat.com/mailman/listinfo/fedora-xen > > > > > > > > > > > > > > > > > > > > > > -- > Please avoid sending me Word or PowerPoint attachments. > See http://www.gnu.org/philosophy/no-word-attachments.html > > thanks... > niny...