Hi, With FDS 1.0.2, I''ve followed the configuration howto guide lines to setup the Directory Server to use SSL (as per my post a few days ago) however after configuring the Administration Server and Console to use SSL as well i''ve run into trouble. The directory server alone works fine with SSL. The reason i''m trying to get Admin and console working in SSL is so i can setup a secure windows sync agreement, without this all i can do is setup a insecure sync agreement. The console will not display anything (absolutely no screen or anything) after entering password and clicking OK in the authentication dialog. There are no messages in the console i started it on. Before i configured the SSL on the admin server and console it was working correctly and displayed the normal Admin server/Directory Server screens. The console which i''m running using (i also tried admin user): startconsole -u "cn=Directory Manager" -a https://ds01.tech:59910 -x nologo I turned loglevel to debug in the admin server and this is what i see: [Tue Nov 28 14:22:46 2006] [info] Connection to child 30 established (server ds01.tech:443, client 10.170.99.22) [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] admserv_host_ip_check: ap_get_remote_host could not resolve 10.170.99.22 [Tue Nov 28 14:22:47 2006] [info] Initial (No.1) HTTPS request received for child 30 (server ds01.tech:443) [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2518): [client 10.170.99.22] checking user cache for: cn=Directory Manager [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2525): [client 10.170.99.22] not in cache, trying DS [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(1480): [client 10.170.99.22] admserv_check_authz: request for uri [/admin-serv/authenticate] [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] admserv_check_authz(): passing [/admin-serv/authenticate] to the userauth handler [Tue Nov 28 14:22:47 2006] [info] Connection to child 30 closed (server ds01.tech:443, client 10.170.99.22) In the slapd log i see: [28/Nov/2006:14:22:46 +0000] conn=51 fd=65 slot=65 SSL connection from 10.170.99.22 to 10.103.20.21 [28/Nov/2006:14:22:46 +0000] conn=51 SSL 128-bit RC4 [28/Nov/2006:14:22:46 +0000] conn=51 op=0 BIND dn="cn=Directory Manager" method=128 version=3 [28/Nov/2006:14:22:46 +0000] conn=51 op=0 RESULT err=0 tag=97 nentries=0 etime=0 dn="cn=directory manager" [28/Nov/2006:14:22:46 +0000] conn=52 fd=64 slot=64 SSL connection from 10.170.99.22 to 10.103.20.21 [28/Nov/2006:14:32:04 +0000] conn=52 op=-1 fd=64 closed - Encountered end of file. Anyone know how i can fix this? Thanks very much Nick This e-mail is the property of Quadriga Worldwide Ltd, intended for the addressee only and confidential. Any dissemination, copying or distribution of this message or any attachments is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from Quadriga may be monitored. Quadriga cannot guarantee any message delivery method is secure or error-free. Information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. We do not accept responsibility for any errors or omissions in this message and/or attachment that arise as a result of transmission. You should carry out your own virus checks before opening any attachment. Any views or opinions presented are solely those of the author and do not necessarily represent those of Quadriga.
Nicholas Byrne wrote:> Hi, > > With FDS 1.0.2, I''ve followed the configuration howto guide lines to > setup the Directory Server to use SSL (as per my post a few days ago) > however after configuring the Administration Server and Console to use > SSL as well i''ve run into trouble. The directory server alone works > fine with SSL. > > The reason i''m trying to get Admin and console working in SSL is so i > can setup a secure windows sync agreement, without this all i can do > is setup a insecure sync agreement.But you don''t have to get Admin and console working with SSL in order to set up a windows sync agreement with SSL. Do the docs say you have to do this? If so, where?> > The console will not display anything (absolutely no screen or > anything) after entering password and clicking OK in the > authentication dialog. There are no messages in the console i started > it on.startconsole -D will give you debug information, and startconsole -D 9 will give you everything.> > Before i configured the SSL on the admin server and console it was > working correctly and displayed the normal Admin server/Directory > Server screens. > > The console which i''m running using (i also tried admin user): > > startconsole -u "cn=Directory Manager" -a https://ds01.tech:59910 -x > nologo > > I turned loglevel to debug in the admin server and this is what i see: > > [Tue Nov 28 14:22:46 2006] [info] Connection to child 30 established > (server ds01.tech:443, client 10.170.99.22) > [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] > admserv_host_ip_check: ap_get_remote_host could not resolve 10.170.99.22 > [Tue Nov 28 14:22:47 2006] [info] Initial (No.1) HTTPS request > received for child 30 (server ds01.tech:443) > [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2518): [client > 10.170.99.22] checking user cache for: cn=Directory Manager > [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2525): [client > 10.170.99.22] not in cache, trying DS > [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(1480): [client > 10.170.99.22] admserv_check_authz: request for uri > [/admin-serv/authenticate] > [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] > admserv_check_authz(): passing [/admin-serv/authenticate] to the > userauth handler > [Tue Nov 28 14:22:47 2006] [info] Connection to child 30 closed > (server ds01.tech:443, client 10.170.99.22)This looks ok, except for the log shows port 443 and you are using port 59910.> > In the slapd log i see: > > [28/Nov/2006:14:22:46 +0000] conn=51 fd=65 slot=65 SSL connection from > 10.170.99.22 to 10.103.20.21 > [28/Nov/2006:14:22:46 +0000] conn=51 SSL 128-bit RC4 > [28/Nov/2006:14:22:46 +0000] conn=51 op=0 BIND dn="cn=Directory > Manager" method=128 version=3 > [28/Nov/2006:14:22:46 +0000] conn=51 op=0 RESULT err=0 tag=97 > nentries=0 etime=0 dn="cn=directory manager"This looks like the /admin-serv/authenticate request as logged in the admin server.> [28/Nov/2006:14:22:46 +0000] conn=52 fd=64 slot=64 SSL connection from > 10.170.99.22 to 10.103.20.21 > [28/Nov/2006:14:32:04 +0000] conn=52 op=-1 fd=64 closed - Encountered > end of file.This looks like the console is attempting to use ldap on the ldaps port. I think you need to tell the console to use SSL when talking to this directory server - http://directory.fedora.redhat.com/wiki/Howto:SSL#Using_the_command_line> > Anyone know how i can fix this? Thanks very much > Nick > > > > > This e-mail is the property of Quadriga Worldwide Ltd, intended for > the addressee only and confidential. Any dissemination, copying or > distribution of this message or any attachments is strictly prohibited. > > If you have received this message in error, please notify us > immediately by replying to the message and deleting it from your > computer. > > Messages sent to and from Quadriga may be monitored. > > Quadriga cannot guarantee any message delivery method is secure or > error-free. Information could be intercepted, corrupted, lost, > destroyed, arrive late or incomplete, or contain viruses. > > We do not accept responsibility for any errors or omissions in this > message and/or attachment that arise as a result of transmission. > > You should carry out your own virus checks before opening any attachment. > > Any views or opinions presented are solely those of the author and do > not necessarily represent those of Quadriga. > > -- > Fedora-directory-users mailing list > Fedora-directory-users@redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users
Firstly, thanks for your help. Responding inline below - Richard Megginson wrote:> Nicholas Byrne wrote: >> Hi, >> >> With FDS 1.0.2, I''ve followed the configuration howto guide lines to >> setup the Directory Server to use SSL (as per my post a few days ago) >> however after configuring the Administration Server and Console to >> use SSL as well i''ve run into trouble. The directory server alone >> works fine with SSL. >> >> The reason i''m trying to get Admin and console working in SSL is so i >> can setup a secure windows sync agreement, without this all i can do >> is setup a insecure sync agreement. > But you don''t have to get Admin and console working with SSL in order > to set up a windows sync agreement with SSL. Do the docs say you have > to do this? If so, where?No the docs don''t say that explicitly but when setting up a windows sync agreement it doesn''t give you the option of changing the supplier - it is set to "ds01.tech:389". The Windows side of the connection is fine as i can specify the connection details. I was following the guide at http://www.redhat.com/docs/manuals/dir-server/ag/7.1/sync.html#2859728 and the image under "step 6" indicates the supplier should be configured as port 636. I am new to this, so i may have got confused but i thought passwords won''t be syncronised unless the FDS supplier and the Windows AD Server are set to use SSL/636. I also realise password changes won''t be synced unless passsync is installed and configured on the AD side, but right now thats not necessary as i just want to get basics working.>> >> The console will not display anything (absolutely no screen or >> anything) after entering password and clicking OK in the >> authentication dialog. There are no messages in the console i started >> it on. > startconsole -D will give you debug information, and startconsole -D 9 > will give you everything. >> >> Before i configured the SSL on the admin server and console it was >> working correctly and displayed the normal Admin server/Directory >> Server screens. >> >> The console which i''m running using (i also tried admin user): >> >> startconsole -u "cn=Directory Manager" -a https://ds01.tech:59910 -x >> nologo >> >> I turned loglevel to debug in the admin server and this is what i see: >> >> [Tue Nov 28 14:22:46 2006] [info] Connection to child 30 established >> (server ds01.tech:443, client 10.170.99.22) >> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >> admserv_host_ip_check: ap_get_remote_host could not resolve 10.170.99.22 >> [Tue Nov 28 14:22:47 2006] [info] Initial (No.1) HTTPS request >> received for child 30 (server ds01.tech:443) >> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2518): [client >> 10.170.99.22] checking user cache for: cn=Directory Manager >> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2525): [client >> 10.170.99.22] not in cache, trying DS >> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(1480): [client >> 10.170.99.22] admserv_check_authz: request for uri >> [/admin-serv/authenticate] >> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >> admserv_check_authz(): passing [/admin-serv/authenticate] to the >> userauth handler >> [Tue Nov 28 14:22:47 2006] [info] Connection to child 30 closed >> (server ds01.tech:443, client 10.170.99.22) > This looks ok, except for the log shows port 443 and you are using > port 59910.Is there a way to fix this? If i''m using https that implies 443 but specifying the port 59910, which has precedence - i assume the the port. If i use http and port 59910 the console with debug shows the server fails to respond: CommManager> New CommRecord (http://ds01.tech:59910/admin-serv/authenticate) http://ds01.tech:59910/[0:0] open> Ready http://ds01.tech:59910/[0:0] accept> http://ds01.tech:59910/admin-serv/authenticate http://ds01.tech:59910/[0:0] send> GET \ http://ds01.tech:59910/[0:0] send> /admin-serv/authenticate \ http://ds01.tech:59910/[0:0] send> HTTP/1.0 http://ds01.tech:59910/[0:0] send> Host: ds01.tech:59910 http://ds01.tech:59910/[0:0] send> Connection: Keep-Alive http://ds01.tech:59910/[0:0] send> User-Agent: Fedora-Management-Console/1.0 http://ds01.tech:59910/[0:0] send> Accept-Language: en http://ds01.tech:59910/[0:0] send> Authorization: Basic \ http://ds01.tech:59910/[0:0] send> <removed> \ http://ds01.tech:59910/[0:0] send> http://ds01.tech:59910/[0:0] send> With https, i get to through the authentication stage at least.>> >> In the slapd log i see: >> >> [28/Nov/2006:14:22:46 +0000] conn=51 fd=65 slot=65 SSL connection >> from 10.170.99.22 to 10.103.20.21 >> [28/Nov/2006:14:22:46 +0000] conn=51 SSL 128-bit RC4 >> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 BIND dn="cn=Directory >> Manager" method=128 version=3 >> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 RESULT err=0 tag=97 >> nentries=0 etime=0 dn="cn=directory manager" > This looks like the /admin-serv/authenticate request as logged in the > admin server. >> [28/Nov/2006:14:22:46 +0000] conn=52 fd=64 slot=64 SSL connection >> from 10.170.99.22 to 10.103.20.21 >> [28/Nov/2006:14:32:04 +0000] conn=52 op=-1 fd=64 closed - Encountered >> end of file. > This looks like the console is attempting to use ldap on the ldaps > port. I think you need to tell the console to use SSL when talking to > this directory server - > http://directory.fedora.redhat.com/wiki/Howto:SSL#Using_the_command_lineI ran through that part of the howto, here is the output below and as you can see " nsServerSecurity" is set to on (i assume this is the bit you mean?) - [nick@nblap ~]$ ldapsearch -x -D "cn=directory manager" -W -b o=netscaperoot "nsServerID=slapd-ds01" Enter LDAP Password: # extended LDIF # # LDAPv3 # base <o=netscaperoot> with scope subtree # filter: nsServerID=slapd-ds01 # requesting: ALL # # slapd-ds01, Fedora Directory Server, Server Group, ds01.tech, tech, Netscap eRoot dn: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server Group, cn=ds01.tech, ou=tech, o=NetscapeRoot objectClass: netscapeServer objectClass: nsDirectoryServer objectClass: nsResourceRef objectClass: nsConfig objectClass: groupOfUniqueNames objectClass: top nsServerSecurity: on nsServerID: slapd-ds01 nsBindDN: cn=Directory Manager nsBaseDN: dc=tech serverRoot: /opt/fedora-ds nsServerPort: 389 nsSecureServerPort: 636 serverProductName: Directory Server (ds01) serverVersionNumber: 1.0.2 installationTimeStamp: 20061121103832Z nsSuiteSpotUser: ldap serverHostName: ds01.tech cn: slapd-ds01 uniqueMember: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server Group, cn=d s01.tech, ou=tech, o=NetscapeRoot uniqueMember: cn=admin-serv-ds01, cn=Fedora Administration Server, cn=Server G roup, cn=ds01.tech, ou=tech, o=NetscapeRoot userPassword:: <removed>>> >> Anyone know how i can fix this? Thanks very much >> Nick >> >> >> >> >> This e-mail is the property of Quadriga Worldwide Ltd, intended for >> the addressee only and confidential. Any dissemination, copying or >> distribution of this message or any attachments is strictly prohibited. >> >> If you have received this message in error, please notify us >> immediately by replying to the message and deleting it from your >> computer. >> >> Messages sent to and from Quadriga may be monitored. >> >> Quadriga cannot guarantee any message delivery method is secure or >> error-free. Information could be intercepted, corrupted, lost, >> destroyed, arrive late or incomplete, or contain viruses. >> >> We do not accept responsibility for any errors or omissions in this >> message and/or attachment that arise as a result of transmission. >> >> You should carry out your own virus checks before opening any >> attachment. >> >> Any views or opinions presented are solely those of the author and do >> not necessarily represent those of Quadriga. >> >> -- >> Fedora-directory-users mailing list >> Fedora-directory-users@redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users > ------------------------------------------------------------------------ > > -- > Fedora-directory-users mailing list > Fedora-directory-users@redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users >This e-mail is the property of Quadriga Worldwide Ltd, intended for the addressee only and confidential. Any dissemination, copying or distribution of this message or any attachments is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from Quadriga may be monitored. Quadriga cannot guarantee any message delivery method is secure or error-free. Information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. We do not accept responsibility for any errors or omissions in this message and/or attachment that arise as a result of transmission. You should carry out your own virus checks before opening any attachment. Any views or opinions presented are solely those of the author and do not necessarily represent those of Quadriga.
Nicholas Byrne wrote:> Firstly, thanks for your help. Responding inline below - > > Richard Megginson wrote: >> Nicholas Byrne wrote: >>> Hi, >>> >>> With FDS 1.0.2, I''ve followed the configuration howto guide lines to >>> setup the Directory Server to use SSL (as per my post a few days >>> ago) however after configuring the Administration Server and Console >>> to use SSL as well i''ve run into trouble. The directory server alone >>> works fine with SSL. >>> >>> The reason i''m trying to get Admin and console working in SSL is so >>> i can setup a secure windows sync agreement, without this all i can >>> do is setup a insecure sync agreement. >> But you don''t have to get Admin and console working with SSL in order >> to set up a windows sync agreement with SSL. Do the docs say you >> have to do this? If so, where? > No the docs don''t say that explicitly but when setting up a windows > sync agreement it doesn''t give you the option of changing the supplier > - it is set to "ds01.tech:389".That''s just the label it uses for that particular server in the console. It really uses ldaps if you configure it to, even though it shows the non-secure port for the label in the console. This is merely used to identify the server. This is a well known source of confusion.> The Windows side of the connection is fine as i can specify the > connection details. I was following the guide at > http://www.redhat.com/docs/manuals/dir-server/ag/7.1/sync.html#2859728 > and the image under "step 6" indicates the supplier should be > configured as port 636. > > I am new to this, so i may have got confused but i thought passwords > won''t be syncronised unless the FDS supplier and the Windows AD Server > are set to use SSL/636. I also realise password changes won''t be > synced unless passsync is installed and configured on the AD side, but > right now thats not necessary as i just want to get basics working.You can use passsync without SSL for testing purposes, but do not do this in production.> >>> >>> The console will not display anything (absolutely no screen or >>> anything) after entering password and clicking OK in the >>> authentication dialog. There are no messages in the console i >>> started it on. >> startconsole -D will give you debug information, and startconsole -D >> 9 will give you everything. >>> >>> Before i configured the SSL on the admin server and console it was >>> working correctly and displayed the normal Admin server/Directory >>> Server screens. >>> >>> The console which i''m running using (i also tried admin user): >>> >>> startconsole -u "cn=Directory Manager" -a https://ds01.tech:59910 -x >>> nologo >>> >>> I turned loglevel to debug in the admin server and this is what i see: >>> >>> [Tue Nov 28 14:22:46 2006] [info] Connection to child 30 established >>> (server ds01.tech:443, client 10.170.99.22) >>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>> admserv_host_ip_check: ap_get_remote_host could not resolve >>> 10.170.99.22 >>> [Tue Nov 28 14:22:47 2006] [info] Initial (No.1) HTTPS request >>> received for child 30 (server ds01.tech:443) >>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2518): [client >>> 10.170.99.22] checking user cache for: cn=Directory Manager >>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2525): [client >>> 10.170.99.22] not in cache, trying DS >>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(1480): [client >>> 10.170.99.22] admserv_check_authz: request for uri >>> [/admin-serv/authenticate] >>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>> admserv_check_authz(): passing [/admin-serv/authenticate] to the >>> userauth handler >>> [Tue Nov 28 14:22:47 2006] [info] Connection to child 30 closed >>> (server ds01.tech:443, client 10.170.99.22) >> This looks ok, except for the log shows port 443 and you are using >> port 59910. > Is there a way to fix this? If i''m using https that implies 443 but > specifying the port 59910, which has precedence - i assume the the > port. If i use http and port 59910 the console with debug shows the > server fails to respond:Right. https tells it to use HTTP over SSL, and the port specifies which port the server is listening on. When you configure the Admin Server to use SSL, you can no longer use HTTP - you must use HTTPS. The admin server doesn''t listen to both a non-secure port and a secure port, as does the directory server.> > CommManager> New CommRecord > (http://ds01.tech:59910/admin-serv/authenticate) > http://ds01.tech:59910/[0:0] open> Ready > http://ds01.tech:59910/[0:0] accept> > http://ds01.tech:59910/admin-serv/authenticate > http://ds01.tech:59910/[0:0] send> GET \ > http://ds01.tech:59910/[0:0] send> /admin-serv/authenticate \ > http://ds01.tech:59910/[0:0] send> HTTP/1.0 > http://ds01.tech:59910/[0:0] send> Host: ds01.tech:59910 > http://ds01.tech:59910/[0:0] send> Connection: Keep-Alive > http://ds01.tech:59910/[0:0] send> User-Agent: > Fedora-Management-Console/1.0 > http://ds01.tech:59910/[0:0] send> Accept-Language: en > http://ds01.tech:59910/[0:0] send> Authorization: Basic \ > http://ds01.tech:59910/[0:0] send> <removed> \ > http://ds01.tech:59910/[0:0] send> > http://ds01.tech:59910/[0:0] send> > > With https, i get to through the authentication stage at least. >>> >>> In the slapd log i see: >>> >>> [28/Nov/2006:14:22:46 +0000] conn=51 fd=65 slot=65 SSL connection >>> from 10.170.99.22 to 10.103.20.21 >>> [28/Nov/2006:14:22:46 +0000] conn=51 SSL 128-bit RC4 >>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 BIND dn="cn=Directory >>> Manager" method=128 version=3 >>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 RESULT err=0 tag=97 >>> nentries=0 etime=0 dn="cn=directory manager" >> This looks like the /admin-serv/authenticate request as logged in the >> admin server. >>> [28/Nov/2006:14:22:46 +0000] conn=52 fd=64 slot=64 SSL connection >>> from 10.170.99.22 to 10.103.20.21 >>> [28/Nov/2006:14:32:04 +0000] conn=52 op=-1 fd=64 closed - >>> Encountered end of file. >> This looks like the console is attempting to use ldap on the ldaps >> port. I think you need to tell the console to use SSL when talking >> to this directory server - >> http://directory.fedora.redhat.com/wiki/Howto:SSL#Using_the_command_line > I ran through that part of the howto, here is the output below and as > you can see " nsServerSecurity" is set to on (i assume this is the > bit you mean?) -Yes. So now attempt to restart the admin server and restart the console, using the https:// URL.> > [nick@nblap ~]$ ldapsearch -x -D "cn=directory manager" -W -b > o=netscaperoot "nsServerID=slapd-ds01" > Enter LDAP Password: > # extended LDIF > # > # LDAPv3 > # base <o=netscaperoot> with scope subtree > # filter: nsServerID=slapd-ds01 > # requesting: ALL > # > > # slapd-ds01, Fedora Directory Server, Server Group, ds01.tech, tech, > Netscap > eRoot > dn: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server Group, > cn=ds01.tech, > ou=tech, o=NetscapeRoot > objectClass: netscapeServer > objectClass: nsDirectoryServer > objectClass: nsResourceRef > objectClass: nsConfig > objectClass: groupOfUniqueNames > objectClass: top > nsServerSecurity: on > nsServerID: slapd-ds01 > nsBindDN: cn=Directory Manager > nsBaseDN: dc=tech > serverRoot: /opt/fedora-ds > nsServerPort: 389 > nsSecureServerPort: 636 > serverProductName: Directory Server (ds01) > serverVersionNumber: 1.0.2 > installationTimeStamp: 20061121103832Z > nsSuiteSpotUser: ldap > serverHostName: ds01.tech > cn: slapd-ds01 > uniqueMember: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server > Group, cn=d > s01.tech, ou=tech, o=NetscapeRoot > uniqueMember: cn=admin-serv-ds01, cn=Fedora Administration Server, > cn=Server G > roup, cn=ds01.tech, ou=tech, o=NetscapeRoot > userPassword:: <removed> > >>> >>> Anyone know how i can fix this? Thanks very much >>> Nick >>> >>> >>> >>> >>> This e-mail is the property of Quadriga Worldwide Ltd, intended for >>> the addressee only and confidential. Any dissemination, copying or >>> distribution of this message or any attachments is strictly prohibited. >>> >>> If you have received this message in error, please notify us >>> immediately by replying to the message and deleting it from your >>> computer. >>> >>> Messages sent to and from Quadriga may be monitored. >>> >>> Quadriga cannot guarantee any message delivery method is secure or >>> error-free. Information could be intercepted, corrupted, lost, >>> destroyed, arrive late or incomplete, or contain viruses. >>> >>> We do not accept responsibility for any errors or omissions in this >>> message and/or attachment that arise as a result of transmission. >>> >>> You should carry out your own virus checks before opening any >>> attachment. >>> >>> Any views or opinions presented are solely those of the author and >>> do not necessarily represent those of Quadriga. >>> >>> -- >>> Fedora-directory-users mailing list >>> Fedora-directory-users@redhat.com >>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> ------------------------------------------------------------------------ >> >> -- >> Fedora-directory-users mailing list >> Fedora-directory-users@redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> > > > > This e-mail is the property of Quadriga Worldwide Ltd, intended for > the addressee only and confidential. Any dissemination, copying or > distribution of this message or any attachments is strictly prohibited. > > If you have received this message in error, please notify us > immediately by replying to the message and deleting it from your > computer. > > Messages sent to and from Quadriga may be monitored. > > Quadriga cannot guarantee any message delivery method is secure or > error-free. Information could be intercepted, corrupted, lost, > destroyed, arrive late or incomplete, or contain viruses. > > We do not accept responsibility for any errors or omissions in this > message and/or attachment that arise as a result of transmission. > > You should carry out your own virus checks before opening any attachment. > > Any views or opinions presented are solely those of the author and do > not necessarily represent those of Quadriga. > > -- > Fedora-directory-users mailing list > Fedora-directory-users@redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users
Richard Megginson wrote:> Nicholas Byrne wrote: >> Firstly, thanks for your help. Responding inline below - >> >> Richard Megginson wrote: >>> Nicholas Byrne wrote: >>>> Hi, >>>> >>>> With FDS 1.0.2, I''ve followed the configuration howto guide lines >>>> to setup the Directory Server to use SSL (as per my post a few days >>>> ago) however after configuring the Administration Server and >>>> Console to use SSL as well i''ve run into trouble. The directory >>>> server alone works fine with SSL. >>>> >>>> The reason i''m trying to get Admin and console working in SSL is so >>>> i can setup a secure windows sync agreement, without this all i can >>>> do is setup a insecure sync agreement. >>> But you don''t have to get Admin and console working with SSL in >>> order to set up a windows sync agreement with SSL. Do the docs say >>> you have to do this? If so, where? >> No the docs don''t say that explicitly but when setting up a windows >> sync agreement it doesn''t give you the option of changing the >> supplier - it is set to "ds01.tech:389". > > That''s just the label it uses for that particular server in the > console. It really uses ldaps if you configure it to, even though it > shows the non-secure port for the label in the console. This is > merely used to identify the server. This is a well known source of > confusion. > >> The Windows side of the connection is fine as i can specify the >> connection details. I was following the guide at >> http://www.redhat.com/docs/manuals/dir-server/ag/7.1/sync.html#2859728 >> and the image under "step 6" indicates the supplier should be >> configured as port 636. >> >> I am new to this, so i may have got confused but i thought passwords >> won''t be syncronised unless the FDS supplier and the Windows AD >> Server are set to use SSL/636. I also realise password changes won''t >> be synced unless passsync is installed and configured on the AD side, >> but right now thats not necessary as i just want to get basics working. > > You can use passsync without SSL for testing purposes, but do not do > this in production.This is incorrect. PassSync requires SSL to work. If SSL is not configured, PassSync will report errors in it''s log file stating that SSL is required. -NGK> >> >>>> >>>> The console will not display anything (absolutely no screen or >>>> anything) after entering password and clicking OK in the >>>> authentication dialog. There are no messages in the console i >>>> started it on. >>> startconsole -D will give you debug information, and startconsole -D >>> 9 will give you everything. >>>> >>>> Before i configured the SSL on the admin server and console it was >>>> working correctly and displayed the normal Admin server/Directory >>>> Server screens. >>>> >>>> The console which i''m running using (i also tried admin user): >>>> >>>> startconsole -u "cn=Directory Manager" -a https://ds01.tech:59910 >>>> -x nologo >>>> >>>> I turned loglevel to debug in the admin server and this is what i see: >>>> >>>> [Tue Nov 28 14:22:46 2006] [info] Connection to child 30 >>>> established (server ds01.tech:443, client 10.170.99.22) >>>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>>> admserv_host_ip_check: ap_get_remote_host could not resolve >>>> 10.170.99.22 >>>> [Tue Nov 28 14:22:47 2006] [info] Initial (No.1) HTTPS request >>>> received for child 30 (server ds01.tech:443) >>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2518): [client >>>> 10.170.99.22] checking user cache for: cn=Directory Manager >>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2525): [client >>>> 10.170.99.22] not in cache, trying DS >>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(1480): [client >>>> 10.170.99.22] admserv_check_authz: request for uri >>>> [/admin-serv/authenticate] >>>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>>> admserv_check_authz(): passing [/admin-serv/authenticate] to the >>>> userauth handler >>>> [Tue Nov 28 14:22:47 2006] [info] Connection to child 30 closed >>>> (server ds01.tech:443, client 10.170.99.22) >>> This looks ok, except for the log shows port 443 and you are using >>> port 59910. >> Is there a way to fix this? If i''m using https that implies 443 but >> specifying the port 59910, which has precedence - i assume the the >> port. If i use http and port 59910 the console with debug shows the >> server fails to respond: > Right. https tells it to use HTTP over SSL, and the port specifies > which port the server is listening on. When you configure the Admin > Server to use SSL, you can no longer use HTTP - you must use HTTPS. > The admin server doesn''t listen to both a non-secure port and a secure > port, as does the directory server. >> >> CommManager> New CommRecord >> (http://ds01.tech:59910/admin-serv/authenticate) >> http://ds01.tech:59910/[0:0] open> Ready >> http://ds01.tech:59910/[0:0] accept> >> http://ds01.tech:59910/admin-serv/authenticate >> http://ds01.tech:59910/[0:0] send> GET \ >> http://ds01.tech:59910/[0:0] send> /admin-serv/authenticate \ >> http://ds01.tech:59910/[0:0] send> HTTP/1.0 >> http://ds01.tech:59910/[0:0] send> Host: ds01.tech:59910 >> http://ds01.tech:59910/[0:0] send> Connection: Keep-Alive >> http://ds01.tech:59910/[0:0] send> User-Agent: >> Fedora-Management-Console/1.0 >> http://ds01.tech:59910/[0:0] send> Accept-Language: en >> http://ds01.tech:59910/[0:0] send> Authorization: Basic \ >> http://ds01.tech:59910/[0:0] send> <removed> \ >> http://ds01.tech:59910/[0:0] send> >> http://ds01.tech:59910/[0:0] send> >> >> With https, i get to through the authentication stage at least. >>>> >>>> In the slapd log i see: >>>> >>>> [28/Nov/2006:14:22:46 +0000] conn=51 fd=65 slot=65 SSL connection >>>> from 10.170.99.22 to 10.103.20.21 >>>> [28/Nov/2006:14:22:46 +0000] conn=51 SSL 128-bit RC4 >>>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 BIND dn="cn=Directory >>>> Manager" method=128 version=3 >>>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 RESULT err=0 tag=97 >>>> nentries=0 etime=0 dn="cn=directory manager" >>> This looks like the /admin-serv/authenticate request as logged in >>> the admin server. >>>> [28/Nov/2006:14:22:46 +0000] conn=52 fd=64 slot=64 SSL connection >>>> from 10.170.99.22 to 10.103.20.21 >>>> [28/Nov/2006:14:32:04 +0000] conn=52 op=-1 fd=64 closed - >>>> Encountered end of file. >>> This looks like the console is attempting to use ldap on the ldaps >>> port. I think you need to tell the console to use SSL when talking >>> to this directory server - >>> http://directory.fedora.redhat.com/wiki/Howto:SSL#Using_the_command_line >>> >> I ran through that part of the howto, here is the output below and as >> you can see " nsServerSecurity" is set to on (i assume this is the >> bit you mean?) - > Yes. So now attempt to restart the admin server and restart the > console, using the https:// URL. >> >> [nick@nblap ~]$ ldapsearch -x -D "cn=directory manager" -W -b >> o=netscaperoot "nsServerID=slapd-ds01" >> Enter LDAP Password: >> # extended LDIF >> # >> # LDAPv3 >> # base <o=netscaperoot> with scope subtree >> # filter: nsServerID=slapd-ds01 >> # requesting: ALL >> # >> >> # slapd-ds01, Fedora Directory Server, Server Group, ds01.tech, tech, >> Netscap >> eRoot >> dn: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server Group, >> cn=ds01.tech, >> ou=tech, o=NetscapeRoot >> objectClass: netscapeServer >> objectClass: nsDirectoryServer >> objectClass: nsResourceRef >> objectClass: nsConfig >> objectClass: groupOfUniqueNames >> objectClass: top >> nsServerSecurity: on >> nsServerID: slapd-ds01 >> nsBindDN: cn=Directory Manager >> nsBaseDN: dc=tech >> serverRoot: /opt/fedora-ds >> nsServerPort: 389 >> nsSecureServerPort: 636 >> serverProductName: Directory Server (ds01) >> serverVersionNumber: 1.0.2 >> installationTimeStamp: 20061121103832Z >> nsSuiteSpotUser: ldap >> serverHostName: ds01.tech >> cn: slapd-ds01 >> uniqueMember: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server >> Group, cn=d >> s01.tech, ou=tech, o=NetscapeRoot >> uniqueMember: cn=admin-serv-ds01, cn=Fedora Administration Server, >> cn=Server G >> roup, cn=ds01.tech, ou=tech, o=NetscapeRoot >> userPassword:: <removed> >> >>>> >>>> Anyone know how i can fix this? Thanks very much >>>> Nick >>>> >>>> >>>> >>>> >>>> This e-mail is the property of Quadriga Worldwide Ltd, intended for >>>> the addressee only and confidential. Any dissemination, copying or >>>> distribution of this message or any attachments is strictly >>>> prohibited. >>>> >>>> If you have received this message in error, please notify us >>>> immediately by replying to the message and deleting it from your >>>> computer. >>>> >>>> Messages sent to and from Quadriga may be monitored. >>>> >>>> Quadriga cannot guarantee any message delivery method is secure or >>>> error-free. Information could be intercepted, corrupted, lost, >>>> destroyed, arrive late or incomplete, or contain viruses. >>>> >>>> We do not accept responsibility for any errors or omissions in this >>>> message and/or attachment that arise as a result of transmission. >>>> >>>> You should carry out your own virus checks before opening any >>>> attachment. >>>> >>>> Any views or opinions presented are solely those of the author and >>>> do not necessarily represent those of Quadriga. >>>> >>>> -- >>>> Fedora-directory-users mailing list >>>> Fedora-directory-users@redhat.com >>>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >>> ------------------------------------------------------------------------ >>> >>> >>> -- >>> Fedora-directory-users mailing list >>> Fedora-directory-users@redhat.com >>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >>> >> >> >> >> This e-mail is the property of Quadriga Worldwide Ltd, intended for >> the addressee only and confidential. Any dissemination, copying or >> distribution of this message or any attachments is strictly prohibited. >> >> If you have received this message in error, please notify us >> immediately by replying to the message and deleting it from your >> computer. >> >> Messages sent to and from Quadriga may be monitored. >> >> Quadriga cannot guarantee any message delivery method is secure or >> error-free. Information could be intercepted, corrupted, lost, >> destroyed, arrive late or incomplete, or contain viruses. >> >> We do not accept responsibility for any errors or omissions in this >> message and/or attachment that arise as a result of transmission. >> >> You should carry out your own virus checks before opening any >> attachment. >> >> Any views or opinions presented are solely those of the author and do >> not necessarily represent those of Quadriga. >> >> -- >> Fedora-directory-users mailing list >> Fedora-directory-users@redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users > ------------------------------------------------------------------------ > > -- > Fedora-directory-users mailing list > Fedora-directory-users@redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users >
Richard Megginson wrote:> Nicholas Byrne wrote: >> Firstly, thanks for your help. Responding inline below - >> >> Richard Megginson wrote: >>> Nicholas Byrne wrote: >>>> Hi, >>>> >>>> With FDS 1.0.2, I''ve followed the configuration howto guide lines >>>> to setup the Directory Server to use SSL (as per my post a few days >>>> ago) however after configuring the Administration Server and >>>> Console to use SSL as well i''ve run into trouble. The directory >>>> server alone works fine with SSL. >>>> >>>> The reason i''m trying to get Admin and console working in SSL is so >>>> i can setup a secure windows sync agreement, without this all i can >>>> do is setup a insecure sync agreement. >>> But you don''t have to get Admin and console working with SSL in >>> order to set up a windows sync agreement with SSL. Do the docs say >>> you have to do this? If so, where? >> No the docs don''t say that explicitly but when setting up a windows >> sync agreement it doesn''t give you the option of changing the >> supplier - it is set to "ds01.tech:389". > > That''s just the label it uses for that particular server in the > console. It really uses ldaps if you configure it to, even though it > shows the non-secure port for the label in the console. This is > merely used to identify the server. This is a well known source of > confusion.OK, it is confusing thanks for clearing that up.> >> The Windows side of the connection is fine as i can specify the >> connection details. I was following the guide at >> http://www.redhat.com/docs/manuals/dir-server/ag/7.1/sync.html#2859728 >> and the image under "step 6" indicates the supplier should be >> configured as port 636. >> >> I am new to this, so i may have got confused but i thought passwords >> won''t be syncronised unless the FDS supplier and the Windows AD >> Server are set to use SSL/636. I also realise password changes won''t >> be synced unless passsync is installed and configured on the AD side, >> but right now thats not necessary as i just want to get basics working. > > You can use passsync without SSL for testing purposes, but do not do > this in production. > >> >>>> >>>> The console will not display anything (absolutely no screen or >>>> anything) after entering password and clicking OK in the >>>> authentication dialog. There are no messages in the console i >>>> started it on. >>> startconsole -D will give you debug information, and startconsole -D >>> 9 will give you everything. >>>> >>>> Before i configured the SSL on the admin server and console it was >>>> working correctly and displayed the normal Admin server/Directory >>>> Server screens. >>>> >>>> The console which i''m running using (i also tried admin user): >>>> >>>> startconsole -u "cn=Directory Manager" -a https://ds01.tech:59910 >>>> -x nologo >>>> >>>> I turned loglevel to debug in the admin server and this is what i see: >>>> >>>> [Tue Nov 28 14:22:46 2006] [info] Connection to child 30 >>>> established (server ds01.tech:443, client 10.170.99.22) >>>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>>> admserv_host_ip_check: ap_get_remote_host could not resolve >>>> 10.170.99.22 >>>> [Tue Nov 28 14:22:47 2006] [info] Initial (No.1) HTTPS request >>>> received for child 30 (server ds01.tech:443) >>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2518): [client >>>> 10.170.99.22] checking user cache for: cn=Directory Manager >>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2525): [client >>>> 10.170.99.22] not in cache, trying DS >>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(1480): [client >>>> 10.170.99.22] admserv_check_authz: request for uri >>>> [/admin-serv/authenticate] >>>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>>> admserv_check_authz(): passing [/admin-serv/authenticate] to the >>>> userauth handler >>>> [Tue Nov 28 14:22:47 2006] [info] Connection to child 30 closed >>>> (server ds01.tech:443, client 10.170.99.22) >>> This looks ok, except for the log shows port 443 and you are using >>> port 59910. >> Is there a way to fix this? If i''m using https that implies 443 but >> specifying the port 59910, which has precedence - i assume the the >> port. If i use http and port 59910 the console with debug shows the >> server fails to respond: > Right. https tells it to use HTTP over SSL, and the port specifies > which port the server is listening on. When you configure the Admin > Server to use SSL, you can no longer use HTTP - you must use HTTPS. > The admin server doesn''t listen to both a non-secure port and a secure > port, as does the directory server. >> >> CommManager> New CommRecord >> (http://ds01.tech:59910/admin-serv/authenticate) >> http://ds01.tech:59910/[0:0] open> Ready >> http://ds01.tech:59910/[0:0] accept> >> http://ds01.tech:59910/admin-serv/authenticate >> http://ds01.tech:59910/[0:0] send> GET \ >> http://ds01.tech:59910/[0:0] send> /admin-serv/authenticate \ >> http://ds01.tech:59910/[0:0] send> HTTP/1.0 >> http://ds01.tech:59910/[0:0] send> Host: ds01.tech:59910 >> http://ds01.tech:59910/[0:0] send> Connection: Keep-Alive >> http://ds01.tech:59910/[0:0] send> User-Agent: >> Fedora-Management-Console/1.0 >> http://ds01.tech:59910/[0:0] send> Accept-Language: en >> http://ds01.tech:59910/[0:0] send> Authorization: Basic \ >> http://ds01.tech:59910/[0:0] send> <removed> \ >> http://ds01.tech:59910/[0:0] send> >> http://ds01.tech:59910/[0:0] send> >> >> With https, i get to through the authentication stage at least. >>>> >>>> In the slapd log i see: >>>> >>>> [28/Nov/2006:14:22:46 +0000] conn=51 fd=65 slot=65 SSL connection >>>> from 10.170.99.22 to 10.103.20.21 >>>> [28/Nov/2006:14:22:46 +0000] conn=51 SSL 128-bit RC4 >>>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 BIND dn="cn=Directory >>>> Manager" method=128 version=3 >>>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 RESULT err=0 tag=97 >>>> nentries=0 etime=0 dn="cn=directory manager" >>> This looks like the /admin-serv/authenticate request as logged in >>> the admin server. >>>> [28/Nov/2006:14:22:46 +0000] conn=52 fd=64 slot=64 SSL connection >>>> from 10.170.99.22 to 10.103.20.21 >>>> [28/Nov/2006:14:32:04 +0000] conn=52 op=-1 fd=64 closed - >>>> Encountered end of file. >>> This looks like the console is attempting to use ldap on the ldaps >>> port. I think you need to tell the console to use SSL when talking >>> to this directory server - >>> http://directory.fedora.redhat.com/wiki/Howto:SSL#Using_the_command_line >>> >> I ran through that part of the howto, here is the output below and as >> you can see " nsServerSecurity" is set to on (i assume this is the >> bit you mean?) - > Yes. So now attempt to restart the admin server and restart the > console, using the https:// URL.Sorry maybe i didn''t make this clear. I had already done this and restarted the admin server and i''m using the https URL. I''m stuck at this point. The logs i copied in earlier are from a server configured in this state. This is where console does not open after the authentication attempt.>> >> [nick@nblap ~]$ ldapsearch -x -D "cn=directory manager" -W -b >> o=netscaperoot "nsServerID=slapd-ds01" >> Enter LDAP Password: >> # extended LDIF >> # >> # LDAPv3 >> # base <o=netscaperoot> with scope subtree >> # filter: nsServerID=slapd-ds01 >> # requesting: ALL >> # >> >> # slapd-ds01, Fedora Directory Server, Server Group, ds01.tech, tech, >> Netscap >> eRoot >> dn: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server Group, >> cn=ds01.tech, >> ou=tech, o=NetscapeRoot >> objectClass: netscapeServer >> objectClass: nsDirectoryServer >> objectClass: nsResourceRef >> objectClass: nsConfig >> objectClass: groupOfUniqueNames >> objectClass: top >> nsServerSecurity: on >> nsServerID: slapd-ds01 >> nsBindDN: cn=Directory Manager >> nsBaseDN: dc=tech >> serverRoot: /opt/fedora-ds >> nsServerPort: 389 >> nsSecureServerPort: 636 >> serverProductName: Directory Server (ds01) >> serverVersionNumber: 1.0.2 >> installationTimeStamp: 20061121103832Z >> nsSuiteSpotUser: ldap >> serverHostName: ds01.tech >> cn: slapd-ds01 >> uniqueMember: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server >> Group, cn=d >> s01.tech, ou=tech, o=NetscapeRoot >> uniqueMember: cn=admin-serv-ds01, cn=Fedora Administration Server, >> cn=Server G >> roup, cn=ds01.tech, ou=tech, o=NetscapeRoot >> userPassword:: <removed> >> >>>> >>>> Anyone know how i can fix this? Thanks very much >>>> Nick >>>> >>>> >>>> >>>> >>>> This e-mail is the property of Quadriga Worldwide Ltd, intended for >>>> the addressee only and confidential. Any dissemination, copying or >>>> distribution of this message or any attachments is strictly >>>> prohibited. >>>> >>>> If you have received this message in error, please notify us >>>> immediately by replying to the message and deleting it from your >>>> computer. >>>> >>>> Messages sent to and from Quadriga may be monitored. >>>> >>>> Quadriga cannot guarantee any message delivery method is secure or >>>> error-free. Information could be intercepted, corrupted, lost, >>>> destroyed, arrive late or incomplete, or contain viruses. >>>> >>>> We do not accept responsibility for any errors or omissions in this >>>> message and/or attachment that arise as a result of transmission. >>>> >>>> You should carry out your own virus checks before opening any >>>> attachment. >>>> >>>> Any views or opinions presented are solely those of the author and >>>> do not necessarily represent those of Quadriga. >>>> >>>> -- >>>> Fedora-directory-users mailing list >>>> Fedora-directory-users@redhat.com >>>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >>> ------------------------------------------------------------------------ >>> >>> >>> -- >>> Fedora-directory-users mailing list >>> Fedora-directory-users@redhat.com >>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >>> >> >> >> >> This e-mail is the property of Quadriga Worldwide Ltd, intended for >> the addressee only and confidential. Any dissemination, copying or >> distribution of this message or any attachments is strictly prohibited. >> >> If you have received this message in error, please notify us >> immediately by replying to the message and deleting it from your >> computer. >> >> Messages sent to and from Quadriga may be monitored. >> >> Quadriga cannot guarantee any message delivery method is secure or >> error-free. Information could be intercepted, corrupted, lost, >> destroyed, arrive late or incomplete, or contain viruses. >> >> We do not accept responsibility for any errors or omissions in this >> message and/or attachment that arise as a result of transmission. >> >> You should carry out your own virus checks before opening any >> attachment. >> >> Any views or opinions presented are solely those of the author and do >> not necessarily represent those of Quadriga. >> >> -- >> Fedora-directory-users mailing list >> Fedora-directory-users@redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users > ------------------------------------------------------------------------ > > -- > Fedora-directory-users mailing list > Fedora-directory-users@redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users >This e-mail is the property of Quadriga Worldwide Ltd, intended for the addressee only and confidential. Any dissemination, copying or distribution of this message or any attachments is strictly prohibited. If you have received this message in error, please notify us immediately by replying to the message and deleting it from your computer. Messages sent to and from Quadriga may be monitored. Quadriga cannot guarantee any message delivery method is secure or error-free. Information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. We do not accept responsibility for any errors or omissions in this message and/or attachment that arise as a result of transmission. You should carry out your own virus checks before opening any attachment. Any views or opinions presented are solely those of the author and do not necessarily represent those of Quadriga.
Nicholas Byrne wrote:> > > Richard Megginson wrote: >> Nicholas Byrne wrote: >>> Firstly, thanks for your help. Responding inline below - >>> >>> Richard Megginson wrote: >>>> Nicholas Byrne wrote: >>>>> Hi, >>>>> >>>>> With FDS 1.0.2, I''ve followed the configuration howto guide lines >>>>> to setup the Directory Server to use SSL (as per my post a few >>>>> days ago) however after configuring the Administration Server and >>>>> Console to use SSL as well i''ve run into trouble. The directory >>>>> server alone works fine with SSL. >>>>> >>>>> The reason i''m trying to get Admin and console working in SSL is >>>>> so i can setup a secure windows sync agreement, without this all i >>>>> can do is setup a insecure sync agreement. >>>> But you don''t have to get Admin and console working with SSL in >>>> order to set up a windows sync agreement with SSL. Do the docs say >>>> you have to do this? If so, where? >>> No the docs don''t say that explicitly but when setting up a windows >>> sync agreement it doesn''t give you the option of changing the >>> supplier - it is set to "ds01.tech:389". >> >> That''s just the label it uses for that particular server in the >> console. It really uses ldaps if you configure it to, even though it >> shows the non-secure port for the label in the console. This is >> merely used to identify the server. This is a well known source of >> confusion. > OK, it is confusing thanks for clearing that up. >> >>> The Windows side of the connection is fine as i can specify the >>> connection details. I was following the guide at >>> http://www.redhat.com/docs/manuals/dir-server/ag/7.1/sync.html#2859728 >>> and the image under "step 6" indicates the supplier should be >>> configured as port 636. >>> >>> I am new to this, so i may have got confused but i thought passwords >>> won''t be syncronised unless the FDS supplier and the Windows AD >>> Server are set to use SSL/636. I also realise password changes won''t >>> be synced unless passsync is installed and configured on the AD >>> side, but right now thats not necessary as i just want to get basics >>> working. >> >> You can use passsync without SSL for testing purposes, but do not do >> this in production. >> >>> >>>>> >>>>> The console will not display anything (absolutely no screen or >>>>> anything) after entering password and clicking OK in the >>>>> authentication dialog. There are no messages in the console i >>>>> started it on. >>>> startconsole -D will give you debug information, and startconsole >>>> -D 9 will give you everything. >>>>> >>>>> Before i configured the SSL on the admin server and console it was >>>>> working correctly and displayed the normal Admin server/Directory >>>>> Server screens. >>>>> >>>>> The console which i''m running using (i also tried admin user): >>>>> >>>>> startconsole -u "cn=Directory Manager" -a https://ds01.tech:59910 >>>>> -x nologo >>>>> >>>>> I turned loglevel to debug in the admin server and this is what i >>>>> see: >>>>> >>>>> [Tue Nov 28 14:22:46 2006] [info] Connection to child 30 >>>>> established (server ds01.tech:443, client 10.170.99.22) >>>>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>>>> admserv_host_ip_check: ap_get_remote_host could not resolve >>>>> 10.170.99.22 >>>>> [Tue Nov 28 14:22:47 2006] [info] Initial (No.1) HTTPS request >>>>> received for child 30 (server ds01.tech:443) >>>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2518): [client >>>>> 10.170.99.22] checking user cache for: cn=Directory Manager >>>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(2525): [client >>>>> 10.170.99.22] not in cache, trying DS >>>>> [Tue Nov 28 14:22:47 2006] [debug] mod_admserv.c(1480): [client >>>>> 10.170.99.22] admserv_check_authz: request for uri >>>>> [/admin-serv/authenticate] >>>>> [Tue Nov 28 14:22:47 2006] [notice] [client 10.170.99.22] >>>>> admserv_check_authz(): passing [/admin-serv/authenticate] to the >>>>> userauth handler >>>>> [Tue Nov 28 14:22:47 2006] [info] Connection to child 30 closed >>>>> (server ds01.tech:443, client 10.170.99.22) >>>> This looks ok, except for the log shows port 443 and you are using >>>> port 59910. >>> Is there a way to fix this? If i''m using https that implies 443 but >>> specifying the port 59910, which has precedence - i assume the the >>> port. If i use http and port 59910 the console with debug shows the >>> server fails to respond: >> Right. https tells it to use HTTP over SSL, and the port specifies >> which port the server is listening on. When you configure the Admin >> Server to use SSL, you can no longer use HTTP - you must use HTTPS. >> The admin server doesn''t listen to both a non-secure port and a >> secure port, as does the directory server. >>> >>> CommManager> New CommRecord >>> (http://ds01.tech:59910/admin-serv/authenticate) >>> http://ds01.tech:59910/[0:0] open> Ready >>> http://ds01.tech:59910/[0:0] accept> >>> http://ds01.tech:59910/admin-serv/authenticate >>> http://ds01.tech:59910/[0:0] send> GET \ >>> http://ds01.tech:59910/[0:0] send> /admin-serv/authenticate \ >>> http://ds01.tech:59910/[0:0] send> HTTP/1.0 >>> http://ds01.tech:59910/[0:0] send> Host: ds01.tech:59910 >>> http://ds01.tech:59910/[0:0] send> Connection: Keep-Alive >>> http://ds01.tech:59910/[0:0] send> User-Agent: >>> Fedora-Management-Console/1.0 >>> http://ds01.tech:59910/[0:0] send> Accept-Language: en >>> http://ds01.tech:59910/[0:0] send> Authorization: Basic \ >>> http://ds01.tech:59910/[0:0] send> <removed> \ >>> http://ds01.tech:59910/[0:0] send> >>> http://ds01.tech:59910/[0:0] send> >>> >>> With https, i get to through the authentication stage at least. >>>>> >>>>> In the slapd log i see: >>>>> >>>>> [28/Nov/2006:14:22:46 +0000] conn=51 fd=65 slot=65 SSL connection >>>>> from 10.170.99.22 to 10.103.20.21 >>>>> [28/Nov/2006:14:22:46 +0000] conn=51 SSL 128-bit RC4 >>>>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 BIND dn="cn=Directory >>>>> Manager" method=128 version=3 >>>>> [28/Nov/2006:14:22:46 +0000] conn=51 op=0 RESULT err=0 tag=97 >>>>> nentries=0 etime=0 dn="cn=directory manager" >>>> This looks like the /admin-serv/authenticate request as logged in >>>> the admin server. >>>>> [28/Nov/2006:14:22:46 +0000] conn=52 fd=64 slot=64 SSL connection >>>>> from 10.170.99.22 to 10.103.20.21 >>>>> [28/Nov/2006:14:32:04 +0000] conn=52 op=-1 fd=64 closed - >>>>> Encountered end of file. >>>> This looks like the console is attempting to use ldap on the ldaps >>>> port. I think you need to tell the console to use SSL when talking >>>> to this directory server - >>>> http://directory.fedora.redhat.com/wiki/Howto:SSL#Using_the_command_line >>>> >>> I ran through that part of the howto, here is the output below and >>> as you can see " nsServerSecurity" is set to on (i assume this is >>> the bit you mean?) - >> Yes. So now attempt to restart the admin server and restart the >> console, using the https:// URL. > > Sorry maybe i didn''t make this clear. I had already done this and > restarted the admin server and i''m using the https URL. I''m stuck at > this point. The logs i copied in earlier are from a server configured > in this state. This is where console does not open after the > authentication attempt.Following the steps in http://directory.fedora.redhat.com/wiki/Howto:SSL, with a fresh installation of Fedora DS 1.0.4, it works. The key item is this: http://directory.fedora.redhat.com/wiki/Howto:SSL#Using_the_command_line If I use ldapmodify to turn nsServerSecurity: on, the console uses LDAPS - with it set to off, it uses LDAP. Do you have more than one directory server? Are you sure the directory server is listening to the LDAPS port? Can you use the ldapsearch command line tool to verify that you can connect to the directory server using ldaps? Did using startconsole -D 9 show anything? Finally, try removing ~/.fedora-console/*.db> >>> >>> [nick@nblap ~]$ ldapsearch -x -D "cn=directory manager" -W -b >>> o=netscaperoot "nsServerID=slapd-ds01" >>> Enter LDAP Password: >>> # extended LDIF >>> # >>> # LDAPv3 >>> # base <o=netscaperoot> with scope subtree >>> # filter: nsServerID=slapd-ds01 >>> # requesting: ALL >>> # >>> >>> # slapd-ds01, Fedora Directory Server, Server Group, ds01.tech, >>> tech, Netscap >>> eRoot >>> dn: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server Group, >>> cn=ds01.tech, >>> ou=tech, o=NetscapeRoot >>> objectClass: netscapeServer >>> objectClass: nsDirectoryServer >>> objectClass: nsResourceRef >>> objectClass: nsConfig >>> objectClass: groupOfUniqueNames >>> objectClass: top >>> nsServerSecurity: on >>> nsServerID: slapd-ds01 >>> nsBindDN: cn=Directory Manager >>> nsBaseDN: dc=tech >>> serverRoot: /opt/fedora-ds >>> nsServerPort: 389 >>> nsSecureServerPort: 636 >>> serverProductName: Directory Server (ds01) >>> serverVersionNumber: 1.0.2 >>> installationTimeStamp: 20061121103832Z >>> nsSuiteSpotUser: ldap >>> serverHostName: ds01.tech >>> cn: slapd-ds01 >>> uniqueMember: cn=slapd-ds01, cn=Fedora Directory Server, cn=Server >>> Group, cn=d >>> s01.tech, ou=tech, o=NetscapeRoot >>> uniqueMember: cn=admin-serv-ds01, cn=Fedora Administration Server, >>> cn=Server G >>> roup, cn=ds01.tech, ou=tech, o=NetscapeRoot >>> userPassword:: <removed> >>> >>>>> >>>>> Anyone know how i can fix this? Thanks very much >>>>> Nick >>>>> >>>>> >>>>> >>>>> >>>>> This e-mail is the property of Quadriga Worldwide Ltd, intended >>>>> for the addressee only and confidential. Any dissemination, >>>>> copying or distribution of this message or any attachments is >>>>> strictly prohibited. >>>>> >>>>> If you have received this message in error, please notify us >>>>> immediately by replying to the message and deleting it from your >>>>> computer. >>>>> >>>>> Messages sent to and from Quadriga may be monitored. >>>>> >>>>> Quadriga cannot guarantee any message delivery method is secure or >>>>> error-free. Information could be intercepted, corrupted, lost, >>>>> destroyed, arrive late or incomplete, or contain viruses. >>>>> >>>>> We do not accept responsibility for any errors or omissions in >>>>> this message and/or attachment that arise as a result of >>>>> transmission. >>>>> >>>>> You should carry out your own virus checks before opening any >>>>> attachment. >>>>> >>>>> Any views or opinions presented are solely those of the author and >>>>> do not necessarily represent those of Quadriga. >>>>> >>>>> -- >>>>> Fedora-directory-users mailing list >>>>> Fedora-directory-users@redhat.com >>>>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >>>> ------------------------------------------------------------------------ >>>> >>>> >>>> -- >>>> Fedora-directory-users mailing list >>>> Fedora-directory-users@redhat.com >>>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >>>> >>> >>> >>> >>> This e-mail is the property of Quadriga Worldwide Ltd, intended for >>> the addressee only and confidential. Any dissemination, copying or >>> distribution of this message or any attachments is strictly prohibited. >>> >>> If you have received this message in error, please notify us >>> immediately by replying to the message and deleting it from your >>> computer. >>> >>> Messages sent to and from Quadriga may be monitored. >>> >>> Quadriga cannot guarantee any message delivery method is secure or >>> error-free. Information could be intercepted, corrupted, lost, >>> destroyed, arrive late or incomplete, or contain viruses. >>> >>> We do not accept responsibility for any errors or omissions in this >>> message and/or attachment that arise as a result of transmission. >>> >>> You should carry out your own virus checks before opening any >>> attachment. >>> >>> Any views or opinions presented are solely those of the author and >>> do not necessarily represent those of Quadriga. >>> >>> -- >>> Fedora-directory-users mailing list >>> Fedora-directory-users@redhat.com >>> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> ------------------------------------------------------------------------ >> >> -- >> Fedora-directory-users mailing list >> Fedora-directory-users@redhat.com >> https://www.redhat.com/mailman/listinfo/fedora-directory-users >> > > > > This e-mail is the property of Quadriga Worldwide Ltd, intended for > the addressee only and confidential. Any dissemination, copying or > distribution of this message or any attachments is strictly prohibited. > > If you have received this message in error, please notify us > immediately by replying to the message and deleting it from your > computer. > > Messages sent to and from Quadriga may be monitored. > > Quadriga cannot guarantee any message delivery method is secure or > error-free. Information could be intercepted, corrupted, lost, > destroyed, arrive late or incomplete, or contain viruses. > > We do not accept responsibility for any errors or omissions in this > message and/or attachment that arise as a result of transmission. > > You should carry out your own virus checks before opening any attachment. > > Any views or opinions presented are solely those of the author and do > not necessarily represent those of Quadriga. > > -- > Fedora-directory-users mailing list > Fedora-directory-users@redhat.com > https://www.redhat.com/mailman/listinfo/fedora-directory-users