There was a bunch of gargage in this command but i filtered most of it out to
get the stuff for my Broadcom card.
root at openlap /etc/inet # /usr/X11/bin/scanpci -v
pci bus 0x0003 cardnum 0x02 function 0x00: vendor 0x14e4 device 0x4320
Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller
CardVendor 0x103c card 0x12f8 (Hewlett-Packard Company, Card unknown)
STATUS 0x0000 COMMAND 0x0006
CLASS 0x02 0x80 0x00 REVISION 0x03
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0xb0204000 addr 0xb0204000 MEM
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0a
BYTE_0 0x01 BYTE_1 0x00 BYTE_2 0xc2 BYTE_3 0x07
root at openlap /etc/inet # ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
inet 127.0.0.1 netmask ff000000
rtls0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4,CoS> mtu
1500 index 2
inet 10.0.0.3 netmask ffffff00 broadcast 10.0.0.255
ether 0:f:b0:73:4b:6d
bcmndis0: flags=201000802<BROADCAST,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 0.0.0.0 netmask 0
ether 0:90:4b:ec:e6:40
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
inet6 ::1/128
--
This message posted from opensolaris.org