Gerben Wierda
2023-Jan-06 22:20 UTC
replicator: Panic: data stack: Out of memory when allocating 268435496 bytes
How problematic is it to have default_vsz_limit = 0 in dovecot.conf? macOS+MacPorts had this as a requirement even. Gerben> On 6 Jan 2023, at 16:49, Paul Kudla <paul at scom.ca> wrote: > > > i ran into this as well > > here is the full config for mine with replication > > # cat dovecot.conf > # 2.3.14 (cee3cbc0d): /usr/local/etc/dovecot/dovecot.conf > # OS: FreeBSD 12.1-RELEASE amd64 > # Hostname: mail18.scom.ca > > auth_debug = no > auth_debug_passwords = no > > default_process_limit = 16384 > > mail_debug = no > > #lock_method = dotlock > #mail_max_lock_timeout = 300s > > #mbox_read_locks = dotlock > #mbox_write_locks = dotlock > > mmap_disable = yes > dotlock_use_excl = no > mail_fsync = always > mail_nfs_storage = no > mail_nfs_index = no > > auth_mechanisms = plain login > auth_verbose = yes > base_dir = /data/dovecot/run/ > debug_log_path = syslog > disable_plaintext_auth = no > dsync_features = empty-header-workaround > > info_log_path = syslog > login_greeting = SCOM.CA Internet Services Inc. - Dovecot ready > login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c > > > mail_location = maildir:~/ > > mail_plugins = " virtual notify replication fts fts_lucene " > mail_prefetch_count = 20 > > protocols = imap pop3 lmtp sieve > > > protocol lmtp { > mail_plugins = $mail_plugins sieve > postmaster_address > } > > service lmtp { > process_limit=1000 > vsz_limit = 512m > client_limit=1 > unix_listener /usr/home/postfix.local/private/dovecot-lmtp { > group = postfix > mode = 0600 > user = postfix > } > } > > protocol lda { > mail_plugins = $mail_plugins sieve > } > > service lda { > process_limit=1000 > vsz_limit = 512m > } > > service imap { > process_limit=4096 > vsz_limit = 2g > client_limit=1 > } > > service pop3 { > process_limit=1000 > vsz_limit = 512m > client_limit=1 > } > > namespace inbox { > inbox = yes > location > mailbox Drafts { > auto = subscribe > special_use = \Drafts > } > mailbox Sent { > auto = subscribe > special_use = \Sent > } > mailbox Trash { > auto = subscribe > special_use = \Trash > } > prefix > separator = / > } > > passdb { > args = /usr/local/etc/dovecot/dovecot-pgsql.conf > driver = sql > } > > doveadm_port = 12345 > doveadm_password = secretxxxx > > service doveadm { > process_limit = 0 > process_min_avail = 0 > idle_kill = 0 > client_limit = 1 > user = vmail > inet_listener { > port = 12345 > } > } > > service config { > unix_listener config { > user = vmail > } > } > > dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u > #dsync_remote_cmd = doveadm sync -d -u%u > > replication_dsync_parameters = -d -N -l 300 -U > > plugin { > mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename > mail_log_fields = uid, box, msgid, from, subject, size, vsize, flags > push_notification_driver = dlog > > sieve = file:~/sieve;active=~/sieve/.dovecot.sieve > #sieve = ~/.dovecot.sieve > sieve_duplicate_default_period = 1h > sieve_duplicate_max_period = 1h > sieve_extensions = +duplicate +notify +imapflags +vacation-seconds > sieve_global_dir = /usr/local/etc/dovecot/sieve > sieve_before = /usr/local/etc/dovecot/sieve/duplicates.sieve > > > mail_replica = tcp:10.221.0.19:12345 > #mail_replica = remote:vmail at 10.221.0.19 > #replication_sync_timeout = 2 > > fts = lucene > fts_lucene = whitespace_chars=@. > fts_autoindex = yes > fts_languages = en > } > > #sieve_extensions = vnd.dovecot.duplicate > > #sieve_plugins = vnd.dovecot.duplicate > > service anvil { > process_limit = 1 > client_limit=5000 > vsz_limit = 512m > unix_listener anvil { > group = vmail > mode = 0666 > } > } > > service indexer-worker { > vsz_limit = 2g > } > > > > service auth { > process_limit = 1 > client_limit=5000 > vsz_limit = 1g > > unix_listener auth-userdb { > mode = 0660 > user = vmail > group = vmail > } > unix_listener /var/spool/postfix/private/auth { > mode = 0666 > } > > } > > service stats { > process_limit = 1000 > vsz_limit = 1g > unix_listener stats-reader { > group = vmail > mode = 0666 > } > unix_listener stats-writer { > group = vmail > mode = 0666 > } > } > userdb { > args = /usr/local/etc/dovecot/dovecot-pgsql.conf > driver = sql > > } > > protocol imap { > mail_max_userip_connections = 50 > mail_plugins = $mail_plugins notify replication > } > > protocol pop3 { > mail_max_userip_connections = 50 > mail_plugins = $mail_plugins notify replication > } > > protocol imaps { > mail_max_userip_connections = 25 > mail_plugins = $mail_plugins notify replication > } > > protocol pop3s { > mail_max_userip_connections = 25 > mail_plugins = $mail_plugins notify replication > } > > > service managesieve-login { > process_limit = 1000 > vsz_limit = 1g > inet_listener sieve { > port = 4190 > } > } > > verbose_proctitle = yes > > replication_max_conns = 100 > > replication_full_sync_interval = 1d > > service replicator { > client_limit = 0 > drop_priv_before_exec = no > idle_kill = 4294967295s > process_limit = 1 > process_min_avail = 0 > service_count = 0 > vsz_limit = 8g > unix_listener replicator-doveadm { > mode = 0600 > user = vmail > } > vsz_limit = 8192M > } > > > service aggregator { > process_limit = 1000 > #vsz_limit = 1g > fifo_listener replication-notify-fifo { > user = vmail > group = vmail > mode = 0666 > } > > } > > service pop3-login { > process_limit = 1000 > client_limit = 100 > vsz_limit = 512m > } > > > service imap-urlauth-login { > process_limit = 1000 > client_limit = 1000 > vsz_limit = 1g > } > > > service imap-login { > process_limit=1000 > client_limit = 1000 > vsz_limit = 1g > } > > > protocol sieve { > managesieve_implementation_string = Dovecot Pigeonhole > managesieve_max_line_length = 65536 > } > > > > > #Addition ssl config > !include sni.conf > > with sni cert support (examples) > > # cat sni.conf > #sni.conf > ssl = yes > verbose_ssl = yes > ssl_dh =</usr/local/etc/dovecot/dh-4096.pem > ssl_prefer_server_ciphers = yes > #ssl_min_protocol = TLSv1.2 > > #Default *.scom.ca > ssl_key =</usr/local/etc/dovecot/scom.pem > ssl_cert =</usr/local/etc/dovecot/scom.pem > ssl_ca =</usr/local/etc/dovecot/scom.pem > > local_name .scom.ca { > ssl_key =</usr/local/etc/dovecot/scom.pem > ssl_cert =</usr/local/etc/dovecot/scom.pem > ssl_ca =</usr/local/etc/dovecot/scom.pem > > } > > local_name mail.clancyca.com { > ssl_key =</usr/local/etc/dovecot/cert/mail.clancyca.com > ssl_cert =</usr/local/etc/dovecot/cert/mail.clancyca.com > ssl_ca =</usr/local/etc/dovecot/cert/mail.clancyca.com > } > > local_name mail.paulkudla.net { > ssl_key =</usr/local/etc/dovecot/cert/mail.paulkudla.net > ssl_cert =</usr/local/etc/dovecot/cert/mail.paulkudla.net > ssl_ca =</usr/local/etc/dovecot/cert/mail.paulkudla.net > } > > local_name mail.ekst.ca { > ssl_key =</usr/local/etc/dovecot/cert/mail.ekst.ca > ssl_cert =</usr/local/etc/dovecot/cert/mail.ekst.ca > ssl_ca =</usr/local/etc/dovecot/cert/mail.ekst.ca > } > > local_name mail.hamletdevelopments.ca { > ssl_key =</usr/local/etc/dovecot/cert/mail.hamletdevelopments.ca > ssl_cert =</usr/local/etc/dovecot/cert/mail.hamletdevelopments.ca > ssl_ca =</usr/local/etc/dovecot/cert/mail.hamletdevelopments.ca > } > > pg sql support supporting replication > > # cat dovecot-pgsql.conf > driver = pgsql > connect = host=localhost port=5433 dbname=scom_billing user=pgsql password> default_pass_scheme = PLAIN > > password_query = SELECT username as user, password FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' > > user_query = SELECT home, uid, gid FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' > > #iterate_query = SELECT user, password FROM email_users WHERE username = '%u' and password <> 'alias' and status = True and destination = '%u' > > iterate_query = SELECT "username" as user, domain FROM email_users WHERE status = True and alias_flag = False > > > > > > Happy Friday !!! > Thanks - paul > > Paul Kudla > > > Scom.ca Internet Services <http://www.scom.ca> > 004-1009 Byron Street South > Whitby, Ontario - Canada > L1N 4S3 > > Toronto 416.642.7266 > Main 1.866.411.7266 > Fax 1.888.892.7266 > Email paul at scom.ca > > On 1/6/2023 5:32 AM, Gerben Wierda wrote: >>> On 6 Jan 2023, at 08:53, Aki Tuomi <aki.tuomi at open-xchange.com <mailto:aki.tuomi at open-xchange.com>> wrote: >>> >>> >>> >>> On January 6, 2023 3:56:39 AM GMT+02:00, Gerben Wierda <gerben.wierda at rna.nl <mailto:gerben.wierda at rna.nl>> wrote: >>>> One step further in my quest to create a replacement mail server. >>>> >>>> I now have my old mail server (2.3.19.1, macOS + MacPorts) and my new (2.3.20, Alpine Linux, Docker, apk package). When I turn on replication it works, but, after a while I see: >>>> >>>> Jan 06 00:50:31 replicator: Panic: data stack: Out of memory when allocating 268435496 bytes >>>> Jan 06 00:50:32 replicator: Fatal: master: service(replicator): child 133 killed with signal 6 (core dumped) >>>> Jan 06 00:50:32 lmtp(pid 195 user sysbh): Warning: replication(sysbh): Sync failure: >>>> Jan 06 00:50:32 lmtp(pid 195 user sysbh): Warning: replication(sysbh): Remote sent invalid input: - >>>> >>>> I've removed synchronous operation for now (found a message on the net suggesting that) but is this known and what does it mean? >>>> >>>> Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda <https://www.linkedin.com/in/gerbenwierda>>) >>>> R&A IT Strategy <https://ea.rna.nl/ <https://ea.rna.nl/>> (main site) >>>> Book: Chess and the Art of Enterprise Architecture <https://ea.rna.nl/the-book/ <https://ea.rna.nl/the-book/>> >>>> Book: Mastering ArchiMate <https://ea.rna.nl/the-book-edition-iii/ <https://ea.rna.nl/the-book-edition-iii/>> >>>> >>> >>> Dovecot default memory limit is 256M. You should probably set >>> >>> service replicator { >>> vsz_limit = 2G >>> } >>> >>> because replicator might have to use more memory, especially for larger indexes. >>> >>> Aki >> That is a good tip as well. >> I had followed this bit of experience from someone else: https://marc.info/?l=dovecot&m=164438199727640 <https://marc.info/?l=dovecot&m=164438199727640>, haven't seen any err message since. But that might be because they are in sync now and both sides are aware. Can I trigger full replication again so I can test? >> Gerben >> -- >> This message has been scanned for viruses and >> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is >> believed to be clean.-------------- next part -------------- An HTML attachment was scrubbed... URL: <https://dovecot.org/pipermail/dovecot/attachments/20230106/cba5fa7e/attachment-0001.htm>
Paul Kudla
2023-Jan-07 10:17 UTC
replicator: Panic: data stack: Out of memory when allocating 268435496 bytes
ok a little bit more info .... My servers all run under FreeBSD 12.xx which was also the base for the apple operating system origionally. setting default_vsz_limit = 0 i seem to remember trying with no so great results setting to zero can cause memory over runs (espically with replication) etc i found that when i used the config i sent eariler (vsz_limit is defaulted (not set )) everything worked I generally find that tweaking the memory alloted to the individual services a more balanced approach but it does take a lot of trial and error also note memory in the system is also a factor my mail servers have 32G dedicated to them which is what the settings were based on that seem to work pretty good at the moment. I am running without any setting thus the default I got this info from : https://doc.dovecot.org/configuration_manual/service_configuration/ vsz_limit Limit the process?s address space (both RLIMIT_DATA and RLIMIT_AS if available). When the space is reached, some memory allocations may start failing with ?Out of memory?, or the kernel may kill the process with signal 9. This setting is mainly intended to prevent memory leaks from eating up all of the memory, but there can be also legitimate reasons why the process reaches this limit. For example a huge mailbox may not be accessed if this limit is too low. The default value (18446744073709551615=2^64-1) sets the limit to default_vsz_limit, while 0 disables the limit entirely. There are 3 types of services that need to be optimized in different ways: Master services (e.g. auth, anvil, indexer, director, log): Currently there isn?t any easy way to optimize these. If these become a bottleneck, typically you need to run another Dovecot server. In some cases it may be possible to create multiple master processes and have each one be responsible for only specific users/processes, although this may also require some extra development. Services that do disk I/O or other blocking operations (e.g. imap, pop3, lmtp): These should have client_limit=1, because any blocking operation will block all the other clients and cause unnecessary delays and even timeouts. This means that process_limit specifies the maximum number of available parallel connections. Services that have no blocking operations (e.g. imap-login, pop3-login): For best performance (but a bit less safety), these should have process_limit and process_min_avail set to the number of CPU cores, so each CPU will be busy serving the process but without unnecessary context switches. Then client_limit needs to be set high enough to be able to serve all the needed connections (max connections=process_limit * client_limit). service_count is commonly set to unlimited (0) for these services. Otherwise when the service_count is beginning to be reached, the total number of available connections will shrink. With very bad luck that could mean that all the processes are simply waiting for the existing connections to die away before the process can die and a new one can be created. Although this could be made less likely by setting process_limit higher than process_min_avail, but that?s still not a guarantee since each process could get a very long running connection and the process_limit would be eventually reached. Happy Saturday !!! Thanks - paul Paul Kudla Scom.ca Internet Services <http://www.scom.ca> 004-1009 Byron Street South Whitby, Ontario - Canada L1N 4S3 Toronto 416.642.7266 Main?1.866.411.7266 Fax?1.888.892.7266 Email?paul at scom.ca On 1/6/2023 5:20 PM, Gerben Wierda wrote:> How problematic is it to have > > default_vsz_limit = 0 > > in dovecot.conf? macOS+MacPorts had this as a requirement even. > > Gerben > >> On 6 Jan 2023, at 16:49, Paul Kudla <paul at scom.ca >> <mailto:paul at scom.ca>> wrote: >> >> >> i ran into this as well >> >> here is the full config for mine with replication >> >> # cat dovecot.conf >> # 2.3.14 (cee3cbc0d): /usr/local/etc/dovecot/dovecot.conf >> # OS: FreeBSD 12.1-RELEASE amd64 >> # Hostname: mail18.scom.ca <http://mail18.scom.ca> >> >> auth_debug = no >> auth_debug_passwords = no >> >> default_process_limit = 16384 >> >> mail_debug = no >> >> #lock_method = dotlock >> #mail_max_lock_timeout = 300s >> >> #mbox_read_locks = dotlock >> #mbox_write_locks = dotlock >> >> mmap_disable = yes >> dotlock_use_excl = no >> mail_fsync = always >> mail_nfs_storage = no >> mail_nfs_index = no >> >> auth_mechanisms = plain login >> auth_verbose = yes >> base_dir = /data/dovecot/run/ >> debug_log_path = syslog >> disable_plaintext_auth = no >> dsync_features = empty-header-workaround >> >> info_log_path = syslog >> login_greeting = SCOM.CA Internet Services Inc. - Dovecot ready >> login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c >> >> >> mail_location = maildir:~/ >> >> mail_plugins = " virtual notify replication fts fts_lucene " >> mail_prefetch_count = 20 >> >> protocols = imap pop3 lmtp sieve >> >> >> protocol lmtp { >> ?mail_plugins = $mail_plugins sieve >> ?postmaster_address >> } >> >> service lmtp { >> ?process_limit=1000 >> ?vsz_limit = 512m >> ?client_limit=1 >> ??unix_listener /usr/home/postfix.local/private/dovecot-lmtp { >> ????group = postfix >> ????mode = 0600 >> ????user = postfix >> ?} >> } >> >> protocol lda { >> ?mail_plugins = $mail_plugins sieve >> } >> >> service lda { >> ?process_limit=1000 >> ?vsz_limit = 512m >> } >> >> service imap { >> ?process_limit=4096 >> ?vsz_limit = 2g >> ?client_limit=1 >> } >> >> service pop3 { >> ?process_limit=1000 >> ?vsz_limit = 512m >> ?client_limit=1 >> } >> >> namespace inbox { >> ?inbox = yes >> ?location >> ?mailbox Drafts { >> ???auto = subscribe >> ???special_use = \Drafts >> ?} >> ?mailbox Sent { >> ???auto = subscribe >> ???special_use = \Sent >> ?} >> ?mailbox Trash { >> ???auto = subscribe >> ???special_use = \Trash >> ?} >> ?prefix >> ?separator = / >> } >> >> passdb { >> ?args = /usr/local/etc/dovecot/dovecot-pgsql.conf >> ?driver = sql >> } >> >> doveadm_port = 12345 >> doveadm_password = secretxxxx >> >> service doveadm { >> ?process_limit = 0 >> ?process_min_avail = 0 >> ?idle_kill = 0 >> ?client_limit = 1 >> ?user = vmail >> ?inet_listener { >> ???port = 12345 >> ?} >> } >> >> service config { >> ?unix_listener config { >> ???user = vmail >> ???} >> } >> >> dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u >> #dsync_remote_cmd = doveadm sync -d -u%u >> >> replication_dsync_parameters = -d -N -l 300 -U >> >> plugin { >> ?mail_log_events = delete undelete expunge copy mailbox_delete >> mailbox_rename >> ?mail_log_fields = uid, box, msgid, from, subject, size, vsize, flags >> ?push_notification_driver = dlog >> >> ?sieve = file:~/sieve;active=~/sieve/.dovecot.sieve >> ?#sieve = ~/.dovecot.sieve >> ?sieve_duplicate_default_period = 1h >> ?sieve_duplicate_max_period = 1h >> ?sieve_extensions = +duplicate +notify +imapflags +vacation-seconds >> ?sieve_global_dir = /usr/local/etc/dovecot/sieve >> ?sieve_before = /usr/local/etc/dovecot/sieve/duplicates.sieve >> >> >> ?mail_replica = tcp:10.221.0.19:12345 >> ?#mail_replica = remote:vmail at 10.221.0.19 <mailto:vmail at 10.221.0.19> >> ?#replication_sync_timeout = 2 >> >> ?fts = lucene >> ?fts_lucene = whitespace_chars=@. >> ???????fts_autoindex = yes >> ???????fts_languages = en >> } >> >> #sieve_extensions = vnd.dovecot.duplicate >> >> #sieve_plugins = vnd.dovecot.duplicate >> >> service anvil { >> ?process_limit = 1 >> ?client_limit=5000 >> ?vsz_limit = 512m >> ?unix_listener anvil { >> ???group = vmail >> ???mode = 0666 >> ?} >> } >> >> service indexer-worker { >> ???????vsz_limit = 2g >> } >> >> >> >> service auth { >> ??process_limit = 1 >> ??client_limit=5000 >> ??vsz_limit = 1g >> >> ??unix_listener auth-userdb { >> ?????mode = 0660 >> ?????user = vmail >> ?????group = vmail >> ??} >> ??unix_listener /var/spool/postfix/private/auth { >> ?????mode = 0666 >> ??} >> >> } >> >> service stats { >> ?process_limit = 1000 >> ?vsz_limit = 1g >> ?unix_listener stats-reader { >> ???group = vmail >> ???mode = 0666 >> ?} >> ?unix_listener stats-writer { >> ???group = vmail >> ???mode = 0666 >> ?} >> } >> userdb { >> ?args = /usr/local/etc/dovecot/dovecot-pgsql.conf >> ?driver = sql >> >> } >> >> protocol imap { >> ?mail_max_userip_connections = 50 >> ?mail_plugins = $mail_plugins notify replication >> } >> >> protocol pop3 { >> ?mail_max_userip_connections = 50 >> ?mail_plugins = $mail_plugins notify replication >> } >> >> protocol imaps { >> ?mail_max_userip_connections = 25 >> ?mail_plugins = $mail_plugins notify replication >> } >> >> protocol pop3s { >> ?mail_max_userip_connections = 25 >> ?mail_plugins = $mail_plugins notify replication >> } >> >> >> service managesieve-login { >> ?process_limit = 1000 >> ?vsz_limit = 1g >> ?inet_listener sieve { >> ???port = 4190 >> ?} >> } >> >> verbose_proctitle = yes >> >> replication_max_conns = 100 >> >> replication_full_sync_interval = 1d >> >> service replicator { >> ?client_limit = 0 >> ?drop_priv_before_exec = no >> ?idle_kill = 4294967295s >> ?process_limit = 1 >> ?process_min_avail = 0 >> ?service_count = 0 >> ?vsz_limit = 8g >> ???????unix_listener replicator-doveadm { >> ???mode = 0600 >> ???user = vmail >> ?} >> ?vsz_limit = 8192M >> } >> >> >> service aggregator { >> ?process_limit = 1000 >> ?#vsz_limit = 1g >> ?fifo_listener replication-notify-fifo { >> ???user = vmail >> ???group = vmail >> ???mode = 0666 >> ?} >> >> } >> >> service pop3-login { >> ?process_limit = 1000 >> ?client_limit = 100 >> ?vsz_limit = 512m >> } >> >> >> service imap-urlauth-login { >> ?process_limit = 1000 >> ?client_limit = 1000 >> ?vsz_limit = 1g >> } >> >> >> service imap-login { >> ?process_limit=1000 >> ?client_limit = 1000 >> ?vsz_limit = 1g >> } >> >> >> protocol sieve { >> ?managesieve_implementation_string = Dovecot Pigeonhole >> ?managesieve_max_line_length = 65536 >> } >> >> >> >> >> #Addition ssl config >> !include sni.conf >> >> with sni cert support (examples) >> >> # cat sni.conf >> #sni.conf >> ssl = yes >> verbose_ssl = yes >> ssl_dh =</usr/local/etc/dovecot/dh-4096.pem >> ssl_prefer_server_ciphers = yes >> #ssl_min_protocol = TLSv1.2 >> >> #Default *.scom.ca <http://scom.ca> >> ssl_key =</usr/local/etc/dovecot/scom.pem >> ssl_cert =</usr/local/etc/dovecot/scom.pem >> ssl_ca =</usr/local/etc/dovecot/scom.pem >> >> local_name .scom.ca <http://scom.ca> { >> ssl_key =</usr/local/etc/dovecot/scom.pem >> ssl_cert =</usr/local/etc/dovecot/scom.pem >> ssl_ca =</usr/local/etc/dovecot/scom.pem >> >> } >> >> local_name mail.clancyca.com <http://mail.clancyca.com> { >> ?ssl_key =</usr/local/etc/dovecot/cert/mail.clancyca.com >> <http://mail.clancyca.com> >> ?ssl_cert =</usr/local/etc/dovecot/cert/mail.clancyca.com >> <http://mail.clancyca.com> >> ?ssl_ca =</usr/local/etc/dovecot/cert/mail.clancyca.com >> <http://mail.clancyca.com> >> } >> >> local_name mail.paulkudla.net <http://mail.paulkudla.net> { >> ?ssl_key =</usr/local/etc/dovecot/cert/mail.paulkudla.net >> <http://mail.paulkudla.net> >> ?ssl_cert =</usr/local/etc/dovecot/cert/mail.paulkudla.net >> <http://mail.paulkudla.net> >> ?ssl_ca =</usr/local/etc/dovecot/cert/mail.paulkudla.net >> <http://mail.paulkudla.net> >> } >> >> local_name mail.ekst.ca <http://mail.ekst.ca> { >> ?ssl_key =</usr/local/etc/dovecot/cert/mail.ekst.ca <http://mail.ekst.ca> >> ?ssl_cert =</usr/local/etc/dovecot/cert/mail.ekst.ca <http://mail.ekst.ca> >> ?ssl_ca =</usr/local/etc/dovecot/cert/mail.ekst.ca <http://mail.ekst.ca> >> } >> >> local_name mail.hamletdevelopments.ca >> <http://mail.hamletdevelopments.ca> { >> ?ssl_key =</usr/local/etc/dovecot/cert/mail.hamletdevelopments.ca >> <http://mail.hamletdevelopments.ca> >> ?ssl_cert =</usr/local/etc/dovecot/cert/mail.hamletdevelopments.ca >> <http://mail.hamletdevelopments.ca> >> ?ssl_ca =</usr/local/etc/dovecot/cert/mail.hamletdevelopments.ca >> <http://mail.hamletdevelopments.ca> >> } >> >> pg sql support supporting replication >> >> # cat dovecot-pgsql.conf >> driver = pgsql >> connect = host=localhost port=5433 dbname=scom_billing user=pgsql >> password>> default_pass_scheme = PLAIN >> >> password_query = SELECT username as user, password FROM email_users >> WHERE username = '%u' and password <> 'alias' and status = True and >> destination = '%u' >> >> user_query = SELECT home, uid, gid FROM email_users WHERE username = >> '%u' and password <> 'alias' and status = True and destination = '%u' >> >> #iterate_query = SELECT user, password FROM email_users WHERE username >> = '%u' and password <> 'alias' and status = True and destination = '%u' >> >> iterate_query = SELECT "username" as user, domain FROM email_users >> WHERE status = True and alias_flag = False >> >> >> >> >> >> Happy Friday !!! >> Thanks - paul >> >> Paul Kudla >> >> >> Scom.ca <http://Scom.ca> Internet Services <http://www.scom.ca >> <http://www.scom.ca>> >> 004-1009 Byron Street South >> Whitby, Ontario - Canada >> L1N 4S3 >> >> Toronto 416.642.7266 >> Main?1.866.411.7266 >> Fax?1.888.892.7266 >> Email?paul at scom.ca <mailto:paul at scom.ca> >> >> On 1/6/2023 5:32 AM, Gerben Wierda wrote: >>>> On 6 Jan 2023, at 08:53, Aki Tuomi <aki.tuomi at open-xchange.com >>>> <mailto:aki.tuomi at open-xchange.com>> wrote: >>>> >>>> >>>> >>>> On January 6, 2023 3:56:39 AM GMT+02:00, Gerben Wierda >>>> <gerben.wierda at rna.nl <mailto:gerben.wierda at rna.nl>> wrote: >>>>> One step further in my quest to create a replacement mail server. >>>>> >>>>> I now have my old mail server (2.3.19.1, macOS + MacPorts) and my >>>>> new (2.3.20, Alpine Linux, Docker, apk package). When I turn on >>>>> replication it works, but, after a while I see: >>>>> >>>>> Jan 06 00:50:31 replicator: Panic: data stack: Out of memory when >>>>> allocating 268435496 bytes >>>>> Jan 06 00:50:32 replicator: Fatal: master: service(replicator): >>>>> child 133 killed with signal 6 (core dumped) >>>>> Jan 06 00:50:32 lmtp(pid 195 user sysbh): Warning: >>>>> replication(sysbh): Sync failure: >>>>> Jan 06 00:50:32 lmtp(pid 195 user sysbh): Warning: >>>>> replication(sysbh): Remote sent invalid input: - >>>>> >>>>> I've removed synchronous operation for now (found a message on the >>>>> net suggesting that) but is this known and what does it mean? >>>>> >>>>> Gerben Wierda (LinkedIn <https://www.linkedin.com/in/gerbenwierda >>>>> <https://www.linkedin.com/in/gerbenwierda>>) >>>>> R&A IT Strategy <https://ea.rna.nl/ <https://ea.rna.nl/>> (main site) >>>>> Book: Chess and the Art of Enterprise?Architecture >>>>> <https://ea.rna.nl/the-book/ <https://ea.rna.nl/the-book/>> >>>>> Book: Mastering ArchiMate <https://ea.rna.nl/the-book-edition-iii/ >>>>> <https://ea.rna.nl/the-book-edition-iii/>> >>>>> >>>> >>>> Dovecot default memory limit is 256M. You should probably set >>>> >>>> service replicator { >>>> ?vsz_limit = 2G >>>> } >>>> >>>> because replicator might have to use more memory, especially for >>>> larger indexes. >>>> >>>> Aki >>> That is a good tip as well. >>> I had followed this bit of experience from someone else: >>> https://marc.info/?l=dovecot&m=164438199727640 >>> <https://marc.info/?l=dovecot&m=164438199727640>, haven't seen any >>> err message since. But that might be because they are in sync now and >>> both sides are aware. Can I trigger full replication again so I can test? >>> Gerben >>> -- >>> This message has been scanned for viruses and >>> dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is >>> believed to be clean. > > > -- > This message has been scanned for viruses and > dangerous content by *MailScanner* <http://www.mailscanner.info/>, and is > believed to be clean.
Apparently Analagous Threads
- replicator: Panic: data stack: Out of memory when allocating 268435496 bytes
- replicator: Panic: data stack: Out of memory when allocating 268435496 bytes
- Redundant Database, Pgsql ?
- Re: replicator: Panic: data stack: Out of memory when allocating 268435496 bytes
- 3.02 bug? Symlink ->foo changed to ->/rsyncd-munged/foo