Macka
2017-Jun-21 15:46 UTC
Dovecot >=2.2.29 + Filesystem quota = incorrect storage information
W dniu 20.06.2017 o 21:25, Timo Sirainen pisze:> On 20 Jun 2017, at 15.49, Macka <dovecot at macka.pl> wrote: >> Hi, >> >> I have problem with quota storage information in dovecot-2.2.29 (and >> newer versions, too - 2.2.30.2). >> I use FS quota backend. > . >> After upgrade from 2.2.27 to 2.2.29 (newest 2.2.30.2 too), dovecot >> returns incorrect informations about quota storage: > Hmm. There are zero differences in quota-fs code between 2.2.27 and 2.2.30. Are you sure the difference isn't something else than Dovecot version? > > >You are probably right. It took me some time but it looks like the problem is in the glibc-2.25 library or rather in the header files used during the compilation (or maybe in something else). I recompiled (.src.rpm's from PLD linux distribution) v2.2.27 and v2.2.30.2 on another machine with glibc-2.24 and then I installed them on a machine with glibc-2.25 libraries. Both dovecot's versions correctly show used space. All dovecot's versions, compiled on a machine with glibc-2.25 and installed on the same machine, returns incorrect account used space. Found differences quota.h files but do not know if it depends on it? */usr/include/sys/quota.h (from glibc-headers-2.24-4.x86_64) - 7974 bytes* ================================================================/* This just represents the non-kernel parts of <linux/quota.h>. * * here's the corresponding copyright: * Copyright (c) 1982, 1986 Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Robert Elz at The University of Melbourne. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _SYS_QUOTA_H #define _SYS_QUOTA_H 1 #include <features.h> #include <sys/types.h> /* * Select between different incompatible quota versions. * Default to the version used by Linux kernel version 2.4.22 * or later. */ #ifndef _LINUX_QUOTA_VERSION # define _LINUX_QUOTA_VERSION 2 #endif /* * Convert diskblocks to blocks and the other way around. * currently only to fool the BSD source. :-) */ #define dbtob(num) ((num) << 10) #define btodb(num) ((num) >> 10) /* * Convert count of filesystem blocks to diskquota blocks, meant * for filesystems where i_blksize != BLOCK_SIZE */ #define fs_to_dq_blocks(num, blksize) (((num) * (blksize)) / BLOCK_SIZE) /* * Definitions for disk quotas imposed on the average user * (big brother finally hits Linux). * * The following constants define the amount of time given a user * before the soft limits are treated as hard limits (usually resulting * in an allocation failure). The timer is started when the user crosses * their soft limit, it is reset when they go below their soft limit. */ #define MAX_IQ_TIME 604800 /* (7*24*60*60) 1 week */ #define MAX_DQ_TIME 604800 /* (7*24*60*60) 1 week */ #define MAXQUOTAS 2 #define USRQUOTA 0 /* element used for user quotas */ #define GRPQUOTA 1 /* element used for group quotas */ /* * Definitions for the default names of the quotas files. */ #define INITQFNAMES { \ "user", /* USRQUOTA */ \ "group", /* GRPQUOTA */ \ "undefined", \ }; #define QUOTAFILENAME "quota" #define QUOTAGROUP "staff" #define NR_DQHASH 43 /* Just an arbitrary number any suggestions ? */ #define NR_DQUOTS 256 /* Number of quotas active at one time */ /* * Command definitions for the 'quotactl' system call. * The commands are broken into a main command defined below * and a subcommand that is used to convey the type of * quota that is being manipulated (see above). */ #define SUBCMDMASK 0x00ff #define SUBCMDSHIFT 8 #define QCMD(cmd, type) (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK)) #if _LINUX_QUOTA_VERSION < 2 # define Q_QUOTAON 0x0100 /* enable quotas */ # define Q_QUOTAOFF 0x0200 /* disable quotas */ # define Q_GETQUOTA 0x0300 /* get limits and usage */ # define Q_SETQUOTA 0x0400 /* set limits and usage */ # define Q_SETUSE 0x0500 /* set usage */ # define Q_SYNC 0x0600 /* sync disk copy of a filesystems quotas */ # define Q_SETQLIM 0x0700 /* set limits */ # define Q_GETSTATS 0x0800 /* get collected stats */ # define Q_RSQUASH 0x1000 /* set root_squash option */ #else # define Q_SYNC 0x800001 /* sync disk copy of a filesystems quotas */ # define Q_QUOTAON 0x800002 /* turn quotas on */ # define Q_QUOTAOFF 0x800003 /* turn quotas off */ # define Q_GETFMT 0x800004 /* get quota format used on given filesystem */ # define Q_GETINFO 0x800005 /* get information about quota files */ # define Q_SETINFO 0x800006 /* set information about quota files */ # define Q_GETQUOTA 0x800007 /* get user quota structure */ # define Q_SETQUOTA 0x800008 /* set user quota structure */ # define Q_GETNEXTQUOTA 0x800009 /* get disk limits and usage >ID */ #endif /* * The following structure defines the format of the disk quota file * (as it appears on disk) - the file is an array of these structures * indexed by user or group number. */ #if _LINUX_QUOTA_VERSION < 2 struct dqblk { u_int32_t dqb_bhardlimit; /* absolute limit on disk blks alloc */ u_int32_t dqb_bsoftlimit; /* preferred limit on disk blks */ u_int32_t dqb_curblocks; /* current block count */ u_int32_t dqb_ihardlimit; /* maximum # allocated inodes */ u_int32_t dqb_isoftlimit; /* preferred inode limit */ u_int32_t dqb_curinodes; /* current # allocated inodes */ time_t dqb_btime; /* time limit for excessive disk use */ time_t dqb_itime; /* time limit for excessive files */ }; #else /* Flags that indicate which fields in dqblk structure are valid. */ #define QIF_BLIMITS 1 #define QIF_SPACE 2 #define QIF_ILIMITS 4 #define QIF_INODES 8 #define QIF_BTIME 16 #define QIF_ITIME 32 #define QIF_LIMITS (QIF_BLIMITS | QIF_ILIMITS) #define QIF_USAGE (QIF_SPACE | QIF_INODES) #define QIF_TIMES (QIF_BTIME | QIF_ITIME) #define QIF_ALL (QIF_LIMITS | QIF_USAGE | QIF_TIMES) struct dqblk { u_int64_t dqb_bhardlimit; /* absolute limit on disk quota blocks alloc */ u_int64_t dqb_bsoftlimit; /* preferred limit on disk quota blocks */ u_int64_t dqb_curspace; /* current quota block count */ u_int64_t dqb_ihardlimit; /* maximum # allocated inodes */ u_int64_t dqb_isoftlimit; /* preferred inode limit */ u_int64_t dqb_curinodes; /* current # allocated inodes */ u_int64_t dqb_btime; /* time limit for excessive disk use */ u_int64_t dqb_itime; /* time limit for excessive files */ u_int32_t dqb_valid; /* bitmask of QIF_* constants */ }; #endif /* * Shorthand notation. */ #define dq_bhardlimit dq_dqb.dqb_bhardlimit #define dq_bsoftlimit dq_dqb.dqb_bsoftlimit #if _LINUX_QUOTA_VERSION < 2 # define dq_curblocks dq_dqb.dqb_curblocks #else # define dq_curspace dq_dqb.dqb_curspace # define dq_valid dq_dqb.dqb_valid #endif #define dq_ihardlimit dq_dqb.dqb_ihardlimit #define dq_isoftlimit dq_dqb.dqb_isoftlimit #define dq_curinodes dq_dqb.dqb_curinodes #define dq_btime dq_dqb.dqb_btime #define dq_itime dq_dqb.dqb_itime #define dqoff(UID) ((loff_t)((UID) * sizeof (struct dqblk))) #if _LINUX_QUOTA_VERSION < 2 struct dqstats { u_int32_t lookups; u_int32_t drops; u_int32_t reads; u_int32_t writes; u_int32_t cache_hits; u_int32_t pages_allocated; u_int32_t allocated_dquots; u_int32_t free_dquots; u_int32_t syncs; }; #else /* Flags that indicate which fields in dqinfo structure are valid. */ # define IIF_BGRACE 1 # define IIF_IGRACE 2 # define IIF_FLAGS 4 # define IIF_ALL (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS) struct dqinfo { u_int64_t dqi_bgrace; u_int64_t dqi_igrace; u_int32_t dqi_flags; u_int32_t dqi_valid; }; #endif __BEGIN_DECLS extern int quotactl (int __cmd, const char *__special, int __id, caddr_t __addr) __THROW; __END_DECLS #endif /* sys/quota.h */ */usr/include/sys/quota.h (from glibc-headers-2.25-2.x86_64) - 5170 bytes* =======================================================================/* This just represents the non-kernel parts of <linux/quota.h>. Copyright (C) 1998-2017 Free Software Foundation, Inc. This file is part of the GNU C Library. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, see <http://www.gnu.org/licenses/>. */ /* * Copyright (c) 1982, 1986 Regents of the University of California. * All rights reserved. * * This code is derived from software contributed to Berkeley by * Robert Elz at The University of Melbourne. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 4. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _SYS_QUOTA_H #define _SYS_QUOTA_H 1 #include <features.h> #include <sys/types.h> #include <linux/quota.h> /* * Convert diskblocks to blocks and the other way around. * currently only to fool the BSD source. :-) */ #define dbtob(num) ((num) << 10) #define btodb(num) ((num) >> 10) /* * Convert count of filesystem blocks to diskquota blocks, meant for * filesystems where i_blksize != 1024. */ #define fs_to_dq_blocks(num, blksize) (((num) * (blksize)) / 1024) /* * Definitions for disk quotas imposed on the average user * (big brother finally hits Linux). * * The following constants define the amount of time given a user * before the soft limits are treated as hard limits (usually resulting * in an allocation failure). The timer is started when the user crosses * their soft limit, it is reset when they go below their soft limit. */ #define MAX_IQ_TIME 604800 /* (7*24*60*60) 1 week */ #define MAX_DQ_TIME 604800 /* (7*24*60*60) 1 week */ #define QUOTAFILENAME "quota" #define QUOTAGROUP "staff" #define NR_DQHASH 43 /* Just an arbitrary number any suggestions ? */ #define NR_DQUOTS 256 /* Number of quotas active at one time */ /* Old name for struct if_dqblk. */ struct dqblk { __uint64_t dqb_bhardlimit; /* absolute limit on disk quota blocks alloc */ __uint64_t dqb_bsoftlimit; /* preferred limit on disk quota blocks */ __uint64_t dqb_curspace; /* current quota block count */ __uint64_t dqb_ihardlimit; /* maximum # allocated inodes */ __uint64_t dqb_isoftlimit; /* preferred inode limit */ __uint64_t dqb_curinodes; /* current # allocated inodes */ __uint64_t dqb_btime; /* time limit for excessive disk use */ __uint64_t dqb_itime; /* time limit for excessive files */ __uint32_t dqb_valid; /* bitmask of QIF_* constants */ }; /* * Shorthand notation. */ #define dq_bhardlimit dq_dqb.dqb_bhardlimit #define dq_bsoftlimit dq_dqb.dqb_bsoftlimit #define dq_curspace dq_dqb.dqb_curspace #define dq_valid dq_dqb.dqb_valid #define dq_ihardlimit dq_dqb.dqb_ihardlimit #define dq_isoftlimit dq_dqb.dqb_isoftlimit #define dq_curinodes dq_dqb.dqb_curinodes #define dq_btime dq_dqb.dqb_btime #define dq_itime dq_dqb.dqb_itime #define dqoff(UID) ((loff_t)((UID) * sizeof (struct dqblk))) /* Old name for struct if_dqinfo. */ struct dqinfo { __uint64_t dqi_bgrace; __uint64_t dqi_igrace; __uint32_t dqi_flags; __uint32_t dqi_valid; }; __BEGIN_DECLS extern int quotactl (int __cmd, const char *__special, int __id, __caddr_t __addr) __THROW; __END_DECLS #endif /* sys/quota.h */
Macka
2017-Oct-17 15:02 UTC
Dovecot >=2.2.29 + Filesystem quota = incorrect storage information
W dniu 21.06.2017 o?17:46, Macka pisze:> W dniu 20.06.2017 o?21:25, Timo Sirainen pisze: >> On 20 Jun 2017, at 15.49, Macka<dovecot at macka.pl> wrote: >>> Hi, >>> >>> I have problem with quota storage information in dovecot-2.2.29 (and >>> newer versions, too - 2.2.30.2). >>> I use FS quota backend. >> . >>> After upgrade from 2.2.27 to 2.2.29 (newest 2.2.30.2 too), dovecot >>> returns incorrect informations about quota storage: >> Hmm. There are zero differences in quota-fs code between 2.2.27 and 2.2.30. Are you sure the difference isn't something else than Dovecot version? >> >> >> > You are probably right. > > It took me some time but it looks like the problem is in the > glibc-2.25 library or rather in the header files used during the > compilation (or maybe in something else). I recompiled (.src.rpm's > from PLD linux distribution) v2.2.27 and v2.2.30.2 on another machine > with glibc-2.24 and then I installed them on a machine with glibc-2.25 > libraries. > > Both dovecot's versions correctly show used space. > > All dovecot's versions, compiled on a machine with glibc-2.25 and > installed on the same machine, returns incorrect account used space. > > > Found differences quota.h files but do not know if it depends on it? > > > */usr/include/sys/quota.h (from glibc-headers-2.24-4.x86_64) - 7974 bytes* > ================================================================> /* This just represents the non-kernel parts of <linux/quota.h>. > ?* > ?* here's the corresponding copyright: > ?* Copyright (c) 1982, 1986 Regents of the University of California. > ?* All rights reserved. > ?* > ?* This code is derived from software contributed to Berkeley by > ?* Robert Elz at The University of Melbourne. > ?* > ?* Redistribution and use in source and binary forms, with or without > ?* modification, are permitted provided that the following conditions > ?* are met: > ?* 1. Redistributions of source code must retain the above copyright > ?*??? notice, this list of conditions and the following disclaimer. > ?* 2. Redistributions in binary form must reproduce the above copyright > ?*??? notice, this list of conditions and the following disclaimer in the > ?*??? documentation and/or other materials provided with the distribution. > ?* 4. Neither the name of the University nor the names of its contributors > ?*??? may be used to endorse or promote products derived from this > software > ?*??? without specific prior written permission. > ?* > ?* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND > ?* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE > ?* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR > PURPOSE > ?* ARE DISCLAIMED.? IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE > LIABLE > ?* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > CONSEQUENTIAL > ?* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS > ?* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) > ?* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, > STRICT > ?* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN > ANY WAY > ?* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF > ?* SUCH DAMAGE. > ?*/ > > #ifndef _SYS_QUOTA_H > #define _SYS_QUOTA_H 1 > > #include <features.h> > #include <sys/types.h> > > /* > ?* Select between different incompatible quota versions. > ?* Default to the version used by Linux kernel version 2.4.22 > ?* or later.? */ > #ifndef _LINUX_QUOTA_VERSION > # define _LINUX_QUOTA_VERSION 2 > #endif > > /* > ?* Convert diskblocks to blocks and the other way around. > ?* currently only to fool the BSD source. :-) > ?*/ > #define dbtob(num) ((num) << 10) > #define btodb(num) ((num) >> 10) > > /* > ?* Convert count of filesystem blocks to diskquota blocks, meant > ?* for filesystems where i_blksize != BLOCK_SIZE > ?*/ > #define fs_to_dq_blocks(num, blksize) (((num) * (blksize)) / BLOCK_SIZE) > > /* > ?* Definitions for disk quotas imposed on the average user > ?* (big brother finally hits Linux). > ?* > ?* The following constants define the amount of time given a user > ?* before the soft limits are treated as hard limits (usually resulting > ?* in an allocation failure). The timer is started when the user crosses > ?* their soft limit, it is reset when they go below their soft limit. > ?*/ > #define MAX_IQ_TIME? 604800???? /* (7*24*60*60) 1 week */ > #define MAX_DQ_TIME? 604800???? /* (7*24*60*60) 1 week */ > > #define MAXQUOTAS 2 > #define USRQUOTA? 0???????????? /* element used for user quotas */ > #define GRPQUOTA? 1???????????? /* element used for group quotas */ > > /* > ?* Definitions for the default names of the quotas files. > ?*/ > #define INITQFNAMES { \ > ?? "user",????? /* USRQUOTA */ \ > ?? "group",?? /* GRPQUOTA */ \ > ?? "undefined", \ > }; > > #define QUOTAFILENAME "quota" > #define QUOTAGROUP "staff" > > #define NR_DQHASH 43????????? /* Just an arbitrary number any > suggestions ? */ > #define NR_DQUOTS 256???????? /* Number of quotas active at one time */ > > /* > ?* Command definitions for the 'quotactl' system call. > ?* The commands are broken into a main command defined below > ?* and a subcommand that is used to convey the type of > ?* quota that is being manipulated (see above). > ?*/ > #define SUBCMDMASK? 0x00ff > #define SUBCMDSHIFT 8 > #define QCMD(cmd, type)? (((cmd) << SUBCMDSHIFT) | ((type) & SUBCMDMASK)) > > #if _LINUX_QUOTA_VERSION < 2 > # define Q_QUOTAON? 0x0100????? /* enable quotas */ > # define Q_QUOTAOFF 0x0200????? /* disable quotas */ > # define Q_GETQUOTA 0x0300????? /* get limits and usage */ > # define Q_SETQUOTA 0x0400????? /* set limits and usage */ > # define Q_SETUSE?? 0x0500????? /* set usage */ > # define Q_SYNC???? 0x0600????? /* sync disk copy of a filesystems > quotas */ > # define Q_SETQLIM? 0x0700????? /* set limits */ > # define Q_GETSTATS 0x0800????? /* get collected stats */ > # define Q_RSQUASH? 0x1000????? /* set root_squash option */ > #else > # define Q_SYNC???? 0x800001??? /* sync disk copy of a filesystems > quotas */ > # define Q_QUOTAON? 0x800002??? /* turn quotas on */ > # define Q_QUOTAOFF 0x800003??? /* turn quotas off */ > # define Q_GETFMT?? 0x800004??? /* get quota format used on given > filesystem */ > # define Q_GETINFO? 0x800005??? /* get information about quota files */ > # define Q_SETINFO? 0x800006??? /* set information about quota files */ > # define Q_GETQUOTA 0x800007??? /* get user quota structure */ > # define Q_SETQUOTA 0x800008??? /* set user quota structure */ > # define Q_GETNEXTQUOTA 0x800009??????? /* get disk limits and usage > >= ID */ > #endif > > /* > ?* The following structure defines the format of the disk quota file > ?* (as it appears on disk) - the file is an array of these structures > ?* indexed by user or group number. > ?*/ > #if _LINUX_QUOTA_VERSION < 2 > struct dqblk > ? { > ??? u_int32_t dqb_bhardlimit;?? /* absolute limit on disk blks alloc */ > ??? u_int32_t dqb_bsoftlimit;?? /* preferred limit on disk blks */ > ??? u_int32_t dqb_curblocks;??? /* current block count */ > ??? u_int32_t dqb_ihardlimit;?? /* maximum # allocated inodes */ > ??? u_int32_t dqb_isoftlimit;?? /* preferred inode limit */ > ??? u_int32_t dqb_curinodes;??? /* current # allocated inodes */ > ??? time_t dqb_btime;?????????? /* time limit for excessive disk use */ > ??? time_t dqb_itime;?????????? /* time limit for excessive files */ > ? }; > #else > > /* Flags that indicate which fields in dqblk structure are valid.? */ > #define QIF_BLIMITS???? 1 > #define QIF_SPACE?????? 2 > #define QIF_ILIMITS???? 4 > #define QIF_INODES????? 8 > #define QIF_BTIME?????? 16 > #define QIF_ITIME?????? 32 > #define QIF_LIMITS????? (QIF_BLIMITS | QIF_ILIMITS) > #define QIF_USAGE?????? (QIF_SPACE | QIF_INODES) > #define QIF_TIMES?????? (QIF_BTIME | QIF_ITIME) > #define QIF_ALL???????? (QIF_LIMITS | QIF_USAGE | QIF_TIMES) > > struct dqblk > ? { > ??? u_int64_t dqb_bhardlimit;?? /* absolute limit on disk quota blocks > alloc */ > ??? u_int64_t dqb_bsoftlimit;?? /* preferred limit on disk quota blocks */ > ??? u_int64_t dqb_curspace;???? /* current quota block count */ > ??? u_int64_t dqb_ihardlimit;?? /* maximum # allocated inodes */ > ??? u_int64_t dqb_isoftlimit;?? /* preferred inode limit */ > ??? u_int64_t dqb_curinodes;??? /* current # allocated inodes */ > ??? u_int64_t dqb_btime;??????? /* time limit for excessive disk use */ > ??? u_int64_t dqb_itime;??????? /* time limit for excessive files */ > ??? u_int32_t dqb_valid;??????? /* bitmask of QIF_* constants */ > ? }; > #endif > > /* > ?* Shorthand notation. > ?*/ > #define dq_bhardlimit?? dq_dqb.dqb_bhardlimit > #define dq_bsoftlimit?? dq_dqb.dqb_bsoftlimit > #if _LINUX_QUOTA_VERSION < 2 > # define dq_curblocks?? dq_dqb.dqb_curblocks > #else > # define dq_curspace??? dq_dqb.dqb_curspace > # define dq_valid?????? dq_dqb.dqb_valid > #endif > #define dq_ihardlimit?? dq_dqb.dqb_ihardlimit > #define dq_isoftlimit?? dq_dqb.dqb_isoftlimit > #define dq_curinodes??? dq_dqb.dqb_curinodes > #define dq_btime??????? dq_dqb.dqb_btime > #define dq_itime??????? dq_dqb.dqb_itime > > #define dqoff(UID)????? ((loff_t)((UID) * sizeof (struct dqblk))) > > #if _LINUX_QUOTA_VERSION < 2 > struct dqstats > ? { > ??? u_int32_t lookups; > ??? u_int32_t drops; > ??? u_int32_t reads; > ??? u_int32_t writes; > ??? u_int32_t cache_hits; > ??? u_int32_t pages_allocated; > ??? u_int32_t allocated_dquots; > ??? u_int32_t free_dquots; > ??? u_int32_t syncs; > ? }; > #else > > /* Flags that indicate which fields in dqinfo structure are valid.? */ > # define IIF_BGRACE???? 1 > # define IIF_IGRACE???? 2 > # define IIF_FLAGS????? 4 > # define IIF_ALL??????? (IIF_BGRACE | IIF_IGRACE | IIF_FLAGS) > > struct dqinfo > ? { > ??? u_int64_t dqi_bgrace; > ??? u_int64_t dqi_igrace; > ??? u_int32_t dqi_flags; > ??? u_int32_t dqi_valid; > ? }; > #endif > > __BEGIN_DECLS > > extern int quotactl (int __cmd, const char *__special, int __id, > ???????????????????? caddr_t __addr) __THROW; > > __END_DECLS > > #endif /* sys/quota.h */ > > > > */usr/include/sys/quota.h (from glibc-headers-2.25-2.x86_64) - 5170 bytes* > =======================================================================> /* This just represents the non-kernel parts of <linux/quota.h>. > ?? Copyright (C) 1998-2017 Free Software Foundation, Inc. > ?? This file is part of the GNU C Library. > > ?? The GNU C Library is free software; you can redistribute it and/or > ?? modify it under the terms of the GNU Lesser General Public > ?? License as published by the Free Software Foundation; either > ?? version 2.1 of the License, or (at your option) any later version. > > ?? The GNU C Library is distributed in the hope that it will be useful, > ?? but WITHOUT ANY WARRANTY; without even the implied warranty of > ?? MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.? See the GNU > ?? Lesser General Public License for more details. > > ?? You should have received a copy of the GNU Lesser General Public > ?? License along with the GNU C Library; if not, see > <http://www.gnu.org/licenses/>. */ > > /* > ?* Copyright (c) 1982, 1986 Regents of the University of California. > ?* All rights reserved. > ?* > ?* This code is derived from software contributed to Berkeley by > ?* Robert Elz at The University of Melbourne. > ?* > ?* Redistribution and use in source and binary forms, with or without > ?* modification, are permitted provided that the following conditions > ?* are met: > ?* 1. Redistributions of source code must retain the above copyright > ?*??? notice, this list of conditions and the following disclaimer. > ?* 2. Redistributions in binary form must reproduce the above copyright > ?*??? notice, this list of conditions and the following disclaimer in the > ?*??? documentation and/or other materials provided with the distribution. > ?* 4. Neither the name of the University nor the names of its contributors > ?*??? may be used to endorse or promote products derived from this > software > ?*??? without specific prior written permission. > ?* > ?* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND > ?* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE > ?* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR > PURPOSE > ?* ARE DISCLAIMED.? IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE > LIABLE > ?* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR > CONSEQUENTIAL > ?* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS > ?* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) > ?* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, > STRICT > ?* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN > ANY WAY > ?* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF > ?* SUCH DAMAGE. > ?*/ > > #ifndef _SYS_QUOTA_H > #define _SYS_QUOTA_H 1 > > #include <features.h> > #include <sys/types.h> > > #include <linux/quota.h> > > /* > ?* Convert diskblocks to blocks and the other way around. > ?* currently only to fool the BSD source. :-) > ?*/ > #define dbtob(num) ((num) << 10) > #define btodb(num) ((num) >> 10) > > /* > ?* Convert count of filesystem blocks to diskquota blocks, meant for > ?* filesystems where i_blksize != 1024. > ?*/ > #define fs_to_dq_blocks(num, blksize) (((num) * (blksize)) / 1024) > > /* > ?* Definitions for disk quotas imposed on the average user > ?* (big brother finally hits Linux). > ?* > ?* The following constants define the amount of time given a user > ?* before the soft limits are treated as hard limits (usually resulting > ?* in an allocation failure). The timer is started when the user crosses > ?* their soft limit, it is reset when they go below their soft limit. > ?*/ > #define MAX_IQ_TIME? 604800???? /* (7*24*60*60) 1 week */ > #define MAX_DQ_TIME? 604800???? /* (7*24*60*60) 1 week */ > > #define QUOTAFILENAME "quota" > #define QUOTAGROUP "staff" > > #define NR_DQHASH 43????????? /* Just an arbitrary number any > suggestions ? */ > #define NR_DQUOTS 256???????? /* Number of quotas active at one time */ > > /* Old name for struct if_dqblk.? */ > struct dqblk > ? { > ??? __uint64_t dqb_bhardlimit;? /* absolute limit on disk quota blocks > alloc */ > ??? __uint64_t dqb_bsoftlimit;? /* preferred limit on disk quota blocks */ > ??? __uint64_t dqb_curspace;??? /* current quota block count */ > ??? __uint64_t dqb_ihardlimit;? /* maximum # allocated inodes */ > ??? __uint64_t dqb_isoftlimit;? /* preferred inode limit */ > ??? __uint64_t dqb_curinodes;?? /* current # allocated inodes */ > ??? __uint64_t dqb_btime;?????? /* time limit for excessive disk use */ > ??? __uint64_t dqb_itime;?????? /* time limit for excessive files */ > ??? __uint32_t dqb_valid;?????? /* bitmask of QIF_* constants */ > ? }; > > /* > ?* Shorthand notation. > ?*/ > #define dq_bhardlimit?? dq_dqb.dqb_bhardlimit > #define dq_bsoftlimit?? dq_dqb.dqb_bsoftlimit > #define dq_curspace???? dq_dqb.dqb_curspace > #define dq_valid??????? dq_dqb.dqb_valid > #define dq_ihardlimit?? dq_dqb.dqb_ihardlimit > #define dq_isoftlimit?? dq_dqb.dqb_isoftlimit > #define dq_curinodes??? dq_dqb.dqb_curinodes > #define dq_btime??????? dq_dqb.dqb_btime > #define dq_itime??????? dq_dqb.dqb_itime > > #define dqoff(UID)????? ((loff_t)((UID) * sizeof (struct dqblk))) > > /* Old name for struct if_dqinfo.? */ > struct dqinfo > ? { > ??? __uint64_t dqi_bgrace; > ??? __uint64_t dqi_igrace; > ??? __uint32_t dqi_flags; > ??? __uint32_t dqi_valid; > ? }; > > __BEGIN_DECLS > > extern int quotactl (int __cmd, const char *__special, int __id, > ???????????????????? __caddr_t __addr) __THROW; > > __END_DECLS > > #endif /* sys/quota.h */ > > >I have to resume the thread. Apparently the problem is caused by the new /usr/include/sys/quota.h file (glibc-2.25 and newer) When I use the quota.h with glibc-headers-2.25, the filesystem quota limits are badly displayed. When using the same glibc-2.25 library but replacing ONLY one quota.h file from the older version of glibc-2.24, after compilation, the limits are correct. -------------- next part -------------- A non-text attachment was scrubbed... Name: glibc-headers-2.24_usr_include_sys_quota.h Type: text/x-chdr Size: 7974 bytes Desc: not available URL: <https://dovecot.org/pipermail/dovecot/attachments/20171017/e7d31bd1/attachment-0003.bin> -------------- next part -------------- A non-text attachment was scrubbed... Name: glibc-headers-2.25_usr_include_sys_quota.h Type: text/x-chdr Size: 5170 bytes Desc: not available URL: <https://dovecot.org/pipermail/dovecot/attachments/20171017/e7d31bd1/attachment-0004.bin> -------------- next part -------------- A non-text attachment was scrubbed... Name: linux-libc-headers-4.12_usr_include_linux_quota.h Type: text/x-chdr Size: 6316 bytes Desc: not available URL: <https://dovecot.org/pipermail/dovecot/attachments/20171017/e7d31bd1/attachment-0005.bin>
Timo Sirainen
2017-Oct-17 19:57 UTC
Dovecot >=2.2.29 + Filesystem quota = incorrect storage information
On 17 Oct 2017, at 18.02, Macka <dovecot at macka.pl> wrote:> > I have to resume the thread. > > Apparently the problem is caused by the new /usr/include/sys/quota.h file (glibc-2.25 and newer) > > When I use the quota.h with glibc-headers-2.25, the filesystem quota limits are badly displayed. > When using the same glibc-2.25 library but replacing ONLY one quota.h file from the older version of glibc-2.24, after compilation, the limits are correct.Looks like they removed the _LINUX_QUOTA_VERSION define from quota.h. This causes Dovecot to assume it's quota v1. I wonder if there's a way to detect that it's a new quota.h or should we just drop support for _LINUX_QUOTA_VERSION==1..
Reasonably Related Threads
- Dovecot >=2.2.29 + Filesystem quota = incorrect storage information
- Re: SAMBA compile errors at XFS kernel.. (fwd)
- [PATCH] quota: Move quotaio_v[12].h from include/linux/ to fs/
- Dovecot >=2.2.29 + Filesystem quota = incorrect storage information
- Filesystem Quota Enhancement Patch