Gabriel L. Somlo
2016-Feb-12 19:25 UTC
Automatically inferring %d on multi-domain virtual install ?
Hi,
I'm trying to allow domain-less logins for a multi-domain virtual IMAP
server, and wondering if I can automatically infer the domain (value of
variable %d) from the local IP (%l) or the hostname used by the client
when connecting to my server.
Let's say I have two host names: mail.foo.org (10.0.0.100) and
mail.bar.com (10.0.0.200), with forward and reverse DNS configured to
resolve A and PTR records in either direction.
Let's also say I have 10.0.0.100 and 10.0.0.200 set up as secondaries
on my server's loopback interface, and routing is set up to bring client
traffic to me for both of those IP addresses.
The relevant bits of my dovecot.conf are:
---%<------------------------------------------------------------------
mail_location = maildir:/var/lib/vmail/%d/%n
passdb {
driver = passwd-file
args = /var/lib/vmail/etc/postfix/userdb
}
userdb {
driver = static
args = uid=dovenull gid=dovenull home=/var/lib/vmail/%d/%n
}
---%<------------------------------------------------------------------
And my userdb passwd-file right now includes:
---%<------------------------------------------------------------------
user1 at foo.org:{PLAIN}user1foo
user2 at foo.org:{PLAIN}user2foo
user1 at bar.com:{PLAIN}user1bar
user2 at bar.com:{PLAIN}user2bar
---%<------------------------------------------------------------------
Right now, user1 at foo.org must configure their imap client like so:
IMAP server: mail.foo.org
username: user1 at foo.org
password: user1foo
I would like to require this (and other) users to only have to set:
IMAP server: mail.foo.org
username: user1
password: ...
and have dovecot somehow infer the "@foo.org" domain based on the fact
that the connection was made to 10.0.0.100, which is mail.foo.org, and
therefore the domain can *only* be "@foo.org".
I could start out by splitting my user database into two files:
userdb.foo.org
---%<------------------------------------------------------------------
user1:{PLAIN}user1foo
user2:{PLAIN}user2foo
---%<------------------------------------------------------------------
userdb.bar.com
---%<------------------------------------------------------------------
user1:{PLAIN}user1bar
user2:{PLAIN}user2bar
---%<------------------------------------------------------------------
... then modify dovecot.conf's passdb setup like so:
---%<------------------------------------------------------------------
passdb {
driver = passwd-file
args = /var/lib/vmail/etc/postfix/userdb.%d
}
---%<------------------------------------------------------------------
... but how would I insure that %d is set to the proper value based
on e.g. a reverse lookup of %l, which, in foo.org's case would be
10.0.0.100, and resolve to mail.foo.org, and *somehow* that would
match %d == "@foo.org" ?
Is this even possible in the first place, or am I just being too fussy
about the aesthetics of my users' imap client config files ? :) :)
Thanks much,
--Gabriel
Steffen Kaiser
2016-Feb-19 07:41 UTC
Automatically inferring %d on multi-domain virtual install ?
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Fri, 12 Feb 2016, Gabriel L. Somlo wrote:> I'm trying to allow domain-less logins for a multi-domain virtual IMAP > server, and wondering if I can automatically infer the domain (value of > variable %d) from the local IP (%l) or the hostname used by the client > when connecting to my server. > > Let's say I have two host names: mail.foo.org (10.0.0.100) and > mail.bar.com (10.0.0.200), with forward and reverse DNS configured to > resolve A and PTR records in either direction. > > Let's also say I have 10.0.0.100 and 10.0.0.200 set up as secondaries > on my server's loopback interface, and routing is set up to bring client > traffic to me for both of those IP addresses.Hm, it should be possible like so: 1) keep the file you have now as 2nd passdb, in order to let your users login like now from anywhere> user1 at foo.org:{PLAIN}user1foo2) from this file create another passwd-file with ExtraField via script / cron jobs, that defines user1 at 10.0.0.100:{PLAIN}user1foo:::::user=user1 at foo.org see http://wiki2.dovecot.org/PasswordDatabase/ExtraFields Maybe allow_nets could limit the clients further. Then add another passdb section pointing to that file using username_format=%n@%l http://wiki2.dovecot.org/AuthDatabase/PasswdFile That will map domain-less logins to full mail addresses, which in turn sets %d, too.> > The relevant bits of my dovecot.conf are: > > ---%<------------------------------------------------------------------ > mail_location = maildir:/var/lib/vmail/%d/%n > passdb { > driver = passwd-file > args = /var/lib/vmail/etc/postfix/userdb > } > userdb { > driver = static > args = uid=dovenull gid=dovenull home=/var/lib/vmail/%d/%n > } > ---%<------------------------------------------------------------------ > > And my userdb passwd-file right now includes: > > ---%<------------------------------------------------------------------ > user1 at foo.org:{PLAIN}user1foo > user2 at foo.org:{PLAIN}user2foo > user1 at bar.com:{PLAIN}user1bar > user2 at bar.com:{PLAIN}user2bar > ---%<------------------------------------------------------------------ > > Right now, user1 at foo.org must configure their imap client like so: > > IMAP server: mail.foo.org > username: user1 at foo.org > password: user1foo > > I would like to require this (and other) users to only have to set: > > IMAP server: mail.foo.org > username: user1 > password: ... > > and have dovecot somehow infer the "@foo.org" domain based on the fact > that the connection was made to 10.0.0.100, which is mail.foo.org, and > therefore the domain can *only* be "@foo.org". > > I could start out by splitting my user database into two files: > > userdb.foo.org > ---%<------------------------------------------------------------------ > user1:{PLAIN}user1foo > user2:{PLAIN}user2foo > ---%<------------------------------------------------------------------ > > userdb.bar.com > ---%<------------------------------------------------------------------ > user1:{PLAIN}user1bar > user2:{PLAIN}user2bar > ---%<------------------------------------------------------------------ > > ... then modify dovecot.conf's passdb setup like so: > > ---%<------------------------------------------------------------------ > passdb { > driver = passwd-file > args = /var/lib/vmail/etc/postfix/userdb.%d > } > ---%<------------------------------------------------------------------ > > ... but how would I insure that %d is set to the proper value based > on e.g. a reverse lookup of %l, which, in foo.org's case would be > 10.0.0.100, and resolve to mail.foo.org, and *somehow* that would > match %d == "@foo.org" ? > > Is this even possible in the first place, or am I just being too fussy > about the aesthetics of my users' imap client config files ? :) :) > > Thanks much, > --Gabriel >- -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEVAwUBVsbHG3z1H7kL/d9rAQLzRggAoBVJDWXDakkqLD+Gye/9KjHvfcIFkf+5 u3W7ZlPSvyePaAM8u0TDnIPJ15aeyO6XZbTTqB9iKQXzluCusvhNOUl14nVO4CjW gJASzpo1Kc9moWW7sWXTF/MCO+O4zVSBtJWdVmJch80hQT8LJxG3jU45FJAd1Jj3 j+Rso5vEtH3Qw8i1cePaRc6FpDQ+7wboUI53OVjSKJGXbsyK5MXJFhoyvOo8UnvU KdbyFoGkYR4n3zaSrkwof6TrRqqgcGA2TUyeQIS8j+ArhDpi7ilOU6x904KK7LoE Ff2CzskTaTwEyTW1DZgJzLPc38PzMv9PX7QNUhdPHLFnYrhrutOfww==CFD6 -----END PGP SIGNATURE-----
Gabriel L. Somlo
2016-Feb-19 21:10 UTC
Automatically inferring %d on multi-domain virtual install ?
On Fri, Feb 19, 2016 at 08:41:15AM +0100, Steffen Kaiser wrote:> >I'm trying to allow domain-less logins for a multi-domain virtual IMAP > >server, and wondering if I can automatically infer the domain (value of > >variable %d) from the local IP (%l) or the hostname used by the client > >when connecting to my server. > > > >Let's say I have two host names: mail.foo.org (10.0.0.100) and > >mail.bar.com (10.0.0.200), with forward and reverse DNS configured to > >resolve A and PTR records in either direction. > > > >Let's also say I have 10.0.0.100 and 10.0.0.200 set up as secondaries > >on my server's loopback interface, and routing is set up to bring client > >traffic to me for both of those IP addresses. > > Hm, it should be possible like so: > > 1) keep the file you have now as 2nd passdb, in order to let your users > login like now from anywhere > > >user1 at foo.org:{PLAIN}user1foo > > 2) from this file create another passwd-file with ExtraField via script / > cron jobs, that defines > > user1 at 10.0.0.100:{PLAIN}user1foo:::::user=user1 at foo.org > > see http://wiki2.dovecot.org/PasswordDatabase/ExtraFields > > Maybe allow_nets could limit the clients further. > > Then add another passdb section pointing to that file using > username_format=%n@%l > > http://wiki2.dovecot.org/AuthDatabase/PasswdFile > > That will map domain-less logins to full mail addresses, which in turn sets > %d, too.That *almost* worked :) I now have passdb { driver = passwd-file args = username_format=%n@%l /var/lib/topgen/etc/postfix/users } pointing to a "users" file with entries such as user1 at 10.0.0.100:{PLAIN}user1foo:::::user=user1 at foo.org The only trouble is, %d does not get set; I get new "user1" and "user2" folders created directly under /var/lib/vmail/, which indicates the %d portion is equal to the empty string. I also tried user1 at 111.0.10.10:{PLAIN}tartans1:::::domain=foo.org which the PasswordDatabase wiki page says should override %d, but still no luck... Thanks for the pointer though, now that I read the relevant bits of documentation it feels like I'm really close, and this *should* work. I'm still either missing something, or tickling a bug (probably the former :) Thanks, --Gabriel> > > > >The relevant bits of my dovecot.conf are: > > > >---%<------------------------------------------------------------------ > >mail_location = maildir:/var/lib/vmail/%d/%n > >passdb { > > driver = passwd-file > > args = /var/lib/vmail/etc/postfix/userdb > >} > >userdb { > > driver = static > > args = uid=dovenull gid=dovenull home=/var/lib/vmail/%d/%n > >} > >---%<------------------------------------------------------------------ > > > >And my userdb passwd-file right now includes: > > > >---%<------------------------------------------------------------------ > >user1 at foo.org:{PLAIN}user1foo > >user2 at foo.org:{PLAIN}user2foo > >user1 at bar.com:{PLAIN}user1bar > >user2 at bar.com:{PLAIN}user2bar > >---%<------------------------------------------------------------------ > > > >Right now, user1 at foo.org must configure their imap client like so: > > > > IMAP server: mail.foo.org > > username: user1 at foo.org > > password: user1foo > > > >I would like to require this (and other) users to only have to set: > > > > IMAP server: mail.foo.org > > username: user1 > > password: ... > > > >and have dovecot somehow infer the "@foo.org" domain based on the fact > >that the connection was made to 10.0.0.100, which is mail.foo.org, and > >therefore the domain can *only* be "@foo.org". > > > >I could start out by splitting my user database into two files: > > > >userdb.foo.org > >---%<------------------------------------------------------------------ > >user1:{PLAIN}user1foo > >user2:{PLAIN}user2foo > >---%<------------------------------------------------------------------ > > > >userdb.bar.com > >---%<------------------------------------------------------------------ > >user1:{PLAIN}user1bar > >user2:{PLAIN}user2bar > >---%<------------------------------------------------------------------ > > > >... then modify dovecot.conf's passdb setup like so: > > > >---%<------------------------------------------------------------------ > >passdb { > > driver = passwd-file > > args = /var/lib/vmail/etc/postfix/userdb.%d > >} > >---%<------------------------------------------------------------------ > > > >... but how would I insure that %d is set to the proper value based > >on e.g. a reverse lookup of %l, which, in foo.org's case would be > >10.0.0.100, and resolve to mail.foo.org, and *somehow* that would > >match %d == "@foo.org" ? > > > >Is this even possible in the first place, or am I just being too fussy > >about the aesthetics of my users' imap client config files ? :) :) > > > >Thanks much, > >--Gabriel > > > > - -- Steffen Kaiser > -----BEGIN PGP SIGNATURE----- > Version: GnuPG v1 > > iQEVAwUBVsbHG3z1H7kL/d9rAQLzRggAoBVJDWXDakkqLD+Gye/9KjHvfcIFkf+5 > u3W7ZlPSvyePaAM8u0TDnIPJ15aeyO6XZbTTqB9iKQXzluCusvhNOUl14nVO4CjW > gJASzpo1Kc9moWW7sWXTF/MCO+O4zVSBtJWdVmJch80hQT8LJxG3jU45FJAd1Jj3 > j+Rso5vEtH3Qw8i1cePaRc6FpDQ+7wboUI53OVjSKJGXbsyK5MXJFhoyvOo8UnvU > KdbyFoGkYR4n3zaSrkwof6TrRqqgcGA2TUyeQIS8j+ArhDpi7ilOU6x904KK7LoE > Ff2CzskTaTwEyTW1DZgJzLPc38PzMv9PX7QNUhdPHLFnYrhrutOfww=> =CFD6 > -----END PGP SIGNATURE-----