thr3ads.net - dovecot - Installing fts-solr on dovecot (centos 6)

If this information is useful, please help other people find it:
Share via:

Kevin Laurie

2015-Apr-18 18:14 UTC

Installing fts-solr on dovecot (centos 6) - [request for help]

hey Christian,
Thanks so much for your feedback. I am still getting an error.


[root at mail tmp]# nano /etc/dovecot/dovecot.conf
[root at mail tmp]# service dovecot restart
Stopping Dovecot Imap:                                     [FAILED]
Starting Dovecot Imap: doveconf: Fatal: Error in configuration file
/etc/dovecot/dovecot.conf line 19: Expecting '='
doveconf: Error: managesieve-login: dump-capability process returned 89
doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf
line 19: Expecting '='
                                                           [FAILED]


Below is the output of dovecot.conf. Cant figure out why.


[root at mail tmp]# cat /etc/dovecot/dovecot.conf

# Listen addresses.
#   - '*' means all available IPv4 addresses.
#   - '[::]' means all available IPv6 addresses.
# Listen on all available addresses by default
listen = * [::]

#base_dir = /var/run/dovecot
mail_plugins = quota

# Enable fts fts_solr plugin globally for Solr Full Text Search Indexing
mail_plugins = $mail_plugins fts fts_solr

plugin {
fts = solr
    #break-imap-search will use solr for indexing TEXT and BODY searches.
    fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/
    fts_autoindex = yes
} acl


# Enabled mail protocols.
protocols = pop3 imap sieve lmtp

# User/group who owns the message files:
mail_uid = 2000
mail_gid = 2000

# Assign uid to virtual users.
first_valid_uid = 2000
last_valid_uid = 2000

# Logging. Reference: http://wiki2.dovecot.org/Logging
log_path = /var/log/dovecot.log
mail_debug = no
auth_verbose = no
auth_debug = no
auth_debug_passwords = no
# Possible values: no, plain, sha1.
auth_verbose_passwords = no

# SSL: Global settings.
# Refer to wiki site for per protocol, ip, server name SSL settings:
# http://wiki2.dovecot.org/SSL/DovecotConfiguration
ssl_protocols = !SSLv2 !SSLv3
ssl = required
verbose_ssl = no
#ssl_ca =</path/to/ca
ssl_cert = </etc/pki/tls/certs/iRedMail.crt
ssl_key = </etc/pki/tls/private/iRedMail.key

# With disable_plaintext_auth=yes AND ssl=required, STARTTLS is mandatory.
# Set disable_plaintext_auth=no AND ssl=yes to allow plain password transmitted
# insecurely.
disable_plaintext_auth = yes
# Allow plain text password per IP address/net
#remote 192.168.0.0/24 {
#   disable_plaintext_auth = no
#}

# Mail location and mailbox format.
mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/

# Authentication related settings.
# Append this domain name if client gives empty realm.
auth_default_realm 
# Authentication mechanisms.
auth_mechanisms = PLAIN LOGIN

# Limits the number of users that can be logging in at the same time.
# Default is 100.
# Note: this value can be overrided by "process_limit =" in service
protocol.
# e.g.
#       protocol imap-login {
#           ...
#           process_limit = 500
#       }
#default_process_limit = 100

service auth {
    unix_listener /var/spool/postfix/private/dovecot-auth {
        user = postfix
        group = postfix
        mode = 0666
    }
    unix_listener auth-master {
        user = vmail
        group = vmail
        mode = 0666
    }
    unix_listener auth-userdb {
        user = vmail
        group = vmail
        mode = 0660
    }
}

# LMTP server (Local Mail Transfer Protocol).
# Reference: http://wiki2.dovecot.org/LMTP
service lmtp {
    user = vmail

    # For higher volume sites, it may be desirable to increase the number of
    # active listener processes. A range of 5 to 20 is probably good for most
    # sites.
    process_min_avail = 5

    # Logging.
    # Require 'info_log_path =' in 'protocol lmtp {}' block.
    executable = lmtp -L

    # Listening on socket file and TCP
    unix_listener /var/spool/postfix/private/dovecot-lmtp {
        user = postfix
        group = postfix
        mode = 0600
    }

    inet_listener lmtp {
        #address = 192.168.0.24 127.0.0.1 ::1
        port = 24
    }
}

# Virtual mail accounts.
userdb {
    args = /etc/dovecot/dovecot-mysql.conf
    driver = sql
}
passdb {
    args = /etc/dovecot/dovecot-mysql.conf
    driver = sql
}

# Master user.
# Master users are able to log in as other users. It's also possible to
# directly log in as any user using a master password, although this isn't
# recommended.
# Reference: http://wiki2.dovecot.org/Authentication/MasterUsers
auth_master_user_separator = *
passdb {
    driver = passwd-file
    args = /etc/dovecot/dovecot-master-users
    master = yes
}

plugin {
    auth_socket_path = /var/run/dovecot/auth-master

    quota = dict:user::proxy::quotadict
    quota_rule = *:storage=1G
    #quota_rule2 = *:messages=0
    #quota_rule3 = Trash:storage=1G
    #quota_rule4 = Junk:ignore

    # Quota warning.
    # If user suddenly receives a huge mail and the quota jumps from
    # 85% to 95%, only the 95% script is executed.
    quota_warning = storage=85%% quota-warning 85 %u
    quota_warning2 = storage=90%% quota-warning 90 %u
    quota_warning3 = storage=95%% quota-warning 95 %u

    # Plugin: autocreate. Create and subscribe to default IMAP folders.
    autocreate = INBOX
    autocreate2 = Sent
    autocreate3 = Trash
    autocreate4 = Drafts
    autocreate5 = Junk
    autosubscribe = INBOX
    autosubscribe2 = Sent
    autosubscribe3 = Trash
    autosubscribe4 = Drafts
    autosubscribe5 = Junk

    # Plugin: expire.
    #expire = Trash 7 Trash/* 7 Junk 30
    #expire_dict = proxy::expire

    # ACL and share folder
    acl = vfile
    acl_shared_dict = proxy::acl

    # By default Dovecot doesn't allow using the IMAP "anyone" or
    # "authenticated" identifier, because it would be an easy way to
spam
    # other users in the system. If you wish to allow it,
    #acl_anyone = allow

    # Pigeonhole managesieve service.
    # Reference: http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration
    # Per-user sieve settings.
    sieve_dir = /%Lh/sieve
    sieve = /%Lh/sieve/dovecot.sieve

    # Global sieve settings.
    sieve_global_dir = /var/vmail/sieve
    # Note: if user has personal sieve script, global sieve rules defined in
    #       sieve_default will be ignored. Please use sieve_before or
    #       sieve_after instead.
    #sieve_default 
    sieve_before = /var/vmail/sieve/dovecot.sieve
    #sieve_after 
    # The maximum number of redirect actions that can be performed during a
    # single script execution. The meaning of 0 differs based on your version.
    # For versions v0.3.0 and beyond this means that redirect is prohibited.
    # For older versions, however, this means that the number of redirects is
    # unlimited, so be careful.
    #sieve_max_redirects = 4
}

service quota-warning {
    executable = script /usr/local/bin/dovecot-quota-warning.sh
    unix_listener quota-warning {
        user = vmail
        group = vmail
        mode = 0660
    }
}

service dict {
    unix_listener dict {
        mode = 0660
        user = vmail
        group = vmail
    }
}

dict {
    #expire = db:/var/lib/dovecot/expire/expire.db
    quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf
    acl = mysql:/etc/dovecot/dovecot-share-folder.conf
}

protocol lda {
    # Reference: http://wiki2.dovecot.org/LDA
    mail_plugins = $mail_plugins sieve autocreate
    auth_socket_path = /var/run/dovecot/auth-master
    log_path = /var/log/dovecot-sieve.log
    lda_mailbox_autocreate = yes
    postmaster_address = root
}

protocol lmtp {
    # Log file
    info_log_path = /var/log/dovecot-lmtp.log

    # Plugins
    mail_plugins = quota
# Enable fts fts_solr plugin globally for Solr Full Text Search Indexing
    mail_plugins = $mail_plugins fts fts_solr

    plugin {
      fts = solr
#break-imap-search will use solr for indexing TEXT and BODY searches.
fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/
fts_autoindex = yes
} sieve
    postmaster_address = postmaster

    lmtp_save_to_detail_mailbox = yes
    recipient_delimiter = +
}

protocol imap {
    mail_plugins = $mail_plugins imap_quota autocreate imap_acl
    imap_client_workarounds = tb-extra-mailbox-sep

    # Maximum number of IMAP connections allowed for a user from each
IP address.
    # NOTE: The username is compared case-sensitively.
    # Default is 10.
    # Increase it to avoid issue like below:
    # "Maximum number of concurrent IMAP connections exceeded"
    mail_max_userip_connections = 20
}
protocol pop3 {
    mail_plugins = $mail_plugins
    pop3_client_workarounds = outlook-no-nuls oe-ns-eoh
    pop3_uidl_format = %08Xu%08Xv

    # Maximum number of IMAP connections allowed for a user from each
IP address.
    # NOTE: The username is compared case-sensitively.
    # Default is 10.
    mail_max_userip_connections = 20
}

# Login processes. Refer to Dovecot wiki for more details:
# http://wiki2.dovecot.org/LoginProcess
service imap-login {
    service_count = 1

    # To avoid startup latency for new client connections, set process_min_avail
    # to higher than zero. That many idling processes are always kept around
    # waiting for new connections.
    #process_min_avail = 0

    # number of simultaneous IMAP connections
    #process_limit = $default_process_limit
    process_limit = 500

    # vsz_limit should be fine at its default 64MB value
    #vsz_limit = 64M
}
service pop3-login {
    service_count = 1

    # number of simultaneous POP3 connections
    #process_limit = 500
}

namespace {
    type = private
    separator = /
    prefix     #location defaults to mail_location.
    inbox = yes
}

namespace {
    type = shared
    separator = /
    prefix = Shared/%%u/
    location = maildir:/%%Lh/Maildir/:INDEX=/%%Lh/Maildir/Shared/%%u
    # this namespace should handle its own subscriptions or not.
    subscriptions = yes
    list = children
}

# Public mailboxes.
# Refer to Dovecot wiki page for more details:
# http://wiki2.dovecot.org/SharedMailboxes/Public
#namespace {
#    type = public
#    separator = /
#    prefix = Public/
#
#    # CONTROL=: Mark this public folder as read-only mailbox
#    # INDEX=: Per-user \Seen flag
#    location
maildir:/var/vmail/public/:CONTROL=~/Maildir/public:INDEX=~/Maildir/public
#
#    # Allow users to subscribe to the public folders.
#    subscriptions = yes
#}
[root at mail tmp]#

On Sun, Apr 19, 2015 at 12:49 AM, Christian Kivalo <ml+dovecot at valo.at>
wrote:> On 2015-04-18 19:23, Kevin Laurie wrote:
>>
>> Hello,
>
> Hello,
>>
>> I have been trying to get full-text-search on dovecot. I followed the
>> tutorial on this site:-
>>
>>
https://extremeshok.com/6622/enabling-apache-solr-4-10-using-jetty-with-dovecot-2-2-for-fulltext-search-results-on-centos-6-iredmail-compatible/
>>
>> The instruction on the page here seems wrong:-
>> sed -i -e 's|mail_plugins = quota|mail_plugins = quotann# Enable
fts
>> fts_solr plugin globally for Solr Full Text Search
>> Indexingnmail_plugins = $mail_plugins fts fts_solrnnplugin {nfts
>> solrn#break-imap-search will use solr for indexing TEXT and BODY
>> searches.nfts_solr = break-imap-search
>> url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn}|'
>> /etc/dovecot.conf
>>
> it seems the \ is missing in front of some "n"s therefore your
missing some
> newlines...
>
>> I would appreciate if someone could help correct the parameters for
>> the dovecot.conf output shown below. Please help.
>>
>>
>>
>> [root at mail tmp]# cat /etc/dovecot/dovecot.conf
>>
>> # Listen addresses.
>> #   - '*' means all available IPv4 addresses.
>> #   - '[::]' means all available IPv6 addresses.
>> # Listen on all available addresses by default
>> listen = * [::]
>>
>> #base_dir = /var/run/dovecot
>> mail_plugins = quotann# Enable fts fts_solr plugin globally for Solr
>> Full Text Search Indexingnmail_plugins = $mail_plugins fts
>> fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for
>> indexing TEXT and BODY searches.nfts_solr = break-imap-search
>> url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} acl
>>
> the above should read with proper newlines:
> #base_dir = /var/run/dovecot
> mail_plugins = quota
>
> # Enable fts fts_solr plugin globally for Solr Full Text Search Indexing
> mail_plugins = $mail_plugins fts fts_solr
>
> plugin {
> fts = solr
>     #break-imap-search will use solr for indexing TEXT and BODY searches.
>     fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/
>     fts_autoindex = yes
> } acl
>
>>
>> protocol lmtp {
>>     # Log file
>>     info_log_path = /var/log/dovecot-lmtp.log
>>
>>     # Plugins
>>     mail_plugins = quotann# Enable fts fts_solr plugin globally for
>> Solr Full Text Search Indexingnmail_plugins = $mail_plugins fts
>> fts_solrnnplugin {nfts = solrn#break-imap-search will use solr for
>> indexing TEXT and BODY searches.nfts_solr = break-imap-search
>> url=http://127.0.0.1:8983/solr/nfts_autoindex = yesn} sieve
>>     postmaster_address = postmaster
>>
>>     lmtp_save_to_detail_mailbox = yes
>>     recipient_delimiter = +
>
> and again correct the above part of your config
>
> # Plugins
> mail_plugins = quota
>
> # Enable fts fts_solr plugin globally for Solr Full Text Search Indexing
> mail_plugins = $mail_plugins fts fts_solr
>
> plugin {
>     fts = solr
>     #break-imap-search will use solr for indexing TEXT and BODY searches.
>     fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/
>     fts_autoindex = yes
> } sieve
>     postmaster_address = postmaster
>
> my config looks as above and its working fine.
>
> hth
>  -c

Christian Kivalo

2015-Apr-18 18:39 UTC

head link

Installing fts-solr on dovecot (centos 6) - [request for help]

Am 18. April 2015 20:14:01 MESZ, schrieb Kevin Laurie 
<superinterstellar at gmail.com>:> hey Christian,
> Thanks so much for your feedback. I am still getting an error.
Hi Kevin,

You're welcome.
> 
> [root at mail tmp]# nano /etc/dovecot/dovecot.conf
> [root at mail tmp]# service dovecot restart
> Stopping Dovecot Imap:                                     [FAILED]
> Starting Dovecot Imap: doveconf: Fatal: Error in configuration file
> /etc/dovecot/dovecot.conf line 19: Expecting '='
> doveconf: Error: managesieve-login: dump-capability process returned 89
> doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf
> line 19: Expecting '='
>                                                           [FAILED]
> 
lets take a look at line 19...
> 
> Below is the output of dovecot.conf. Cant figure out why.
> 
> 
> [root at mail tmp]# cat /etc/dovecot/dovecot.conf
> 
> # Listen addresses.
> #   - '*' means all available IPv4 addresses.
> #   - '[::]' means all available IPv6 addresses.
> # Listen on all available addresses by default
> listen = * [::]
> 
> #base_dir = /var/run/dovecot
> mail_plugins = quota
> 
> # Enable fts fts_solr plugin globally for Solr Full Text Search
> Indexing
> mail_plugins = $mail_plugins fts fts_solr
> 
> plugin {
> fts = solr
>  #break-imap-search will use solr for indexing TEXT and BODY searches.
>    fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/
>    fts_autoindex = yes
> } acl
remove acl and you should be good.

hth
- c

Kevin Laurie

2015-Apr-18 20:02 UTC

head link

Installing fts-solr on dovecot (centos 6) - [request for help]

Dear Christian,
I guess its working now.
Now I have to test it. *fingers crossed*
Appreciate your help
Thanks once again
Kevin

On Sun, Apr 19, 2015 at 1:39 AM, Christian Kivalo <ml+dovecot at valo.at>
wrote:> Am 18. April 2015 20:14:01 MESZ, schrieb Kevin Laurie
> <superinterstellar at gmail.com>:
>>
>> hey Christian,
>> Thanks so much for your feedback. I am still getting an error.
>
>
> Hi Kevin,
>
> You're welcome.
>
>>
>> [root at mail tmp]# nano /etc/dovecot/dovecot.conf
>> [root at mail tmp]# service dovecot restart
>> Stopping Dovecot Imap:                                     [FAILED]
>> Starting Dovecot Imap: doveconf: Fatal: Error in configuration file
>> /etc/dovecot/dovecot.conf line 19: Expecting '='
>> doveconf: Error: managesieve-login: dump-capability process returned 89
>> doveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf
>> line 19: Expecting '='
>>                                                           [FAILED]
>>
>
> lets take a look at line 19...
>
>>
>> Below is the output of dovecot.conf. Cant figure out why.
>>
>>
>> [root at mail tmp]# cat /etc/dovecot/dovecot.conf
>>
>> # Listen addresses.
>> #   - '*' means all available IPv4 addresses.
>> #   - '[::]' means all available IPv6 addresses.
>> # Listen on all available addresses by default
>> listen = * [::]
>>
>> #base_dir = /var/run/dovecot
>> mail_plugins = quota
>>
>> # Enable fts fts_solr plugin globally for Solr Full Text Search
>> Indexing
>> mail_plugins = $mail_plugins fts fts_solr
>>
>> plugin {
>> fts = solr
>>  #break-imap-search will use solr for indexing TEXT and BODY searches.
>>    fts_solr = break-imap-search url=http://127.0.0.1:8983/solr/
>>    fts_autoindex = yes
>> } acl
>
>
> remove acl and you should be good.
>
> hth
> - c

Reasonably Related Threads

Search for more maybe matching threads

dovecot - Apr 2015 - Installing fts-solr on dovecot (centos 6) - [request for help]

Installing fts-solr on dovecot (centos 6) - [request for help]

Installing fts-solr on dovecot (centos 6) - [request for help]

Installing fts-solr on dovecot (centos 6) - [request for help]

Reasonably Related Threads