crossbow discuss - Oct 2009 - Help Req: Crossbow and Vbox

Hello,

  I''m trying to get vbox to work with a virtual nic. (in bridged
networking mode). I was able to get the nic up and get a dhcp IP.

Host -- opensolaris 2009.06
guest -- opensolaris 2009.06

(From host)
12:33:52 Fri Oct 30 vrajah at vrajah-hp ~ 22 $ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232
index 1
        inet 127.0.0.1 netmask ff000000
inic0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500
index 2
        inet 192.168.1.4 netmask ffffff00 broadcast 192.168.1.255
nge0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500
index 3
        inet 192.168.1.10 netmask ffffff00 broadcast 192.168.1.255
vboxnet0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 4
        inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252
index 1
        inet6 ::1/128


I was able  to install opensolarisl 2009.06  -- configure it to use the inic0
interface.
I''m unable to ssh in from the network.... Whin i try to login from the
host i log in to the same system (host).

Can anyone help me...


Thanks
Vijay Rajah
-- 
This message posted from opensolaris.org

vijay Rajah wrote:
> I was able  to install opensolarisl 2009.06  -- configure it to use the
inic0
> interface. I''m unable to ssh in from the network.... Whin i try to
login from
> the host i log in to the same system (host).
I can''t tell what your goal is. Here''s a pointer to a recent
zone example that may help. It also references the other
crossbow examples:

http://hub.opensolaris.org/bin/view/Community+Group+testing/crossbow

You probably need to setup a default router vnic on the host and
do some ipnat configuration (/etc/ipf/ipnat.conf).

Cheers,
Jim

Hi, Vijay!
Could you please post the output of the next commands?
$ pfexec dladm show-etherstub
$ pfexec dladm show-vnic

Thanks, and best regards,

HeCSa.



On Thu, Oct 29, 2009 at 8:14 PM, vijay Rajah <vijayrajah at gmail.com>
wrote:
> Hello,
>
>  I''m trying to get vbox to work with a virtual nic. (in bridged
networking
> mode). I was able to get the nic up and get a dhcp IP.
>
> Host -- opensolaris 2009.06
> guest -- opensolaris 2009.06
>
> (From host)
> 12:33:52 Fri Oct 30 vrajah at vrajah-hp ~ 22 $ifconfig -a
> lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232
> index 1
>        inet 127.0.0.1 netmask ff000000
> inic0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu
1500
> index 2
>        inet 192.168.1.4 netmask ffffff00 broadcast 192.168.1.255
> nge0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu
1500
> index 3
>        inet 192.168.1.10 netmask ffffff00 broadcast 192.168.1.255
> vboxnet0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index
> 4
>        inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255
> lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu
8252
> index 1
>        inet6 ::1/128
>
>
> I was able  to install opensolarisl 2009.06  -- configure it to use the
> inic0 interface.
> I''m unable to ssh in from the network.... Whin i try to login from
the host
> i log in to the same system (host).
>
> Can anyone help me...
>
>
> Thanks
> Vijay Rajah
> --
> This message posted from opensolaris.org
> _______________________________________________
> crossbow-discuss mailing list
> crossbow-discuss at opensolaris.org
> http://mail.opensolaris.org/mailman/listinfo/crossbow-discuss
>


-- 
HeCSa
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://mail.opensolaris.org/pipermail/crossbow-discuss/attachments/20091030/1b0d1783/attachment.html>