CentOS - Jun 2020 - After update to 8 (2004) ... system is unbootable - UEFI Secure boot

Hi all,

I updated a Dell XPS laptop from CentOS 8.1 (1911) to 8.2 (2004).

Installed kernels are
kernel-4.18.0-147.5.1.el8_1.x86_64
kernel-4.18.0-147.8.1.el8_1.x86_64
kernel-4.18.0-193.6.3.el8_2.x86_64

Unfortunately I can not boot into the latest
kernel-4.18.0-193.6.3.el8_2.x86_64.

After grub2 screen I only see following line:

EFI stub: UEFI Secure Boot is enabled

Booting into the older kernel is still possible. The
above line appears and after that the normal kernel
output scrolls over the screen (rhgb quiet disabled).

Is the new kernel correctly signed?

What can I do?

--
Thanks
Leon

On 16/06/2020 15:06, Leon Fauster via CentOS wrote:
> Hi all,
> 
> I updated a Dell XPS laptop from CentOS 8.1 (1911) to 8.2 (2004).
> 
> Installed kernels are
> kernel-4.18.0-147.5.1.el8_1.x86_64
> kernel-4.18.0-147.8.1.el8_1.x86_64
> kernel-4.18.0-193.6.3.el8_2.x86_64
> 
> Unfortunately I can not boot into the latest
> kernel-4.18.0-193.6.3.el8_2.x86_64.
> 
> After grub2 screen I only see following line:
> 
> EFI stub: UEFI Secure Boot is enabled
> 
> Booting into the older kernel is still possible. The
> above line appears and after that the normal kernel
> output scrolls over the screen (rhgb quiet disabled).
> 
> Is the new kernel correctly signed?
> 
> What can I do?
> 
> -- 
> Thanks
> Leon
Hi Leon,

Don't think that it's due to secureboot, as on my work laptop (thinkpad
t490s), I have secureboot on, and kernel working fine.

OTOH, on my family laptop (also in secureboot mode), when I updated from
8.1.1011 to 8.2.2004, laptop became unresponsive during the
microcode_ctl update (in scriptlet) and after that it auto-reset itself
, so in the middle of the whole rpm transaction.
I tried to recover it but it was to a point where it was faster to just
reinstall from scratch with 8.2.2004, which I did ... and in gnome,
everything was fine, etc (adding repo, pkgs) but then on the *same*
kernel it was installed with, just tried a reboot, and nothing  : grub
shows menu, you select kernel and on upper left there is only cursor
(fixed) and nothing happens ..

I'll try to diagnose what's the issue as actually that means troubles
with family using that laptop :)


-- 
Fabian Arrotin
The CentOS Project | https://www.centos.org
gpg key: 17F3B7A1 | twitter: @arrfab

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL:
<http://lists.centos.org/pipermail/centos/attachments/20200616/35e35d45/attachment.sig>

Am 16.06.20 um 22:04 schrieb Fabian Arrotin:
> On 16/06/2020 15:06, Leon Fauster via CentOS wrote:
>> Hi all,
>>
>> I updated a Dell XPS laptop from CentOS 8.1 (1911) to 8.2 (2004).
>>
>> Installed kernels are
>> kernel-4.18.0-147.5.1.el8_1.x86_64
>> kernel-4.18.0-147.8.1.el8_1.x86_64
>> kernel-4.18.0-193.6.3.el8_2.x86_64
>>
>> Unfortunately I can not boot into the latest
>> kernel-4.18.0-193.6.3.el8_2.x86_64.
>>
>> After grub2 screen I only see following line:
>>
>> EFI stub: UEFI Secure Boot is enabled
>>
>> Booting into the older kernel is still possible. The
>> above line appears and after that the normal kernel
>> output scrolls over the screen (rhgb quiet disabled).
>>
>> Is the new kernel correctly signed?
>>
>> What can I do?
>>
>> -- 
>> Thanks
>> Leon
> 
> Hi Leon,
> 
> Don't think that it's due to secureboot, as on my work laptop
(thinkpad
> t490s), I have secureboot on, and kernel working fine.
> 
> OTOH, on my family laptop (also in secureboot mode), when I updated from
> 8.1.1011 to 8.2.2004, laptop became unresponsive during the
> microcode_ctl update (in scriptlet) and after that it auto-reset itself
> , so in the middle of the whole rpm transaction.
> I tried to recover it but it was to a point where it was faster to just
> reinstall from scratch with 8.2.2004, which I did ... and in gnome,
> everything was fine, etc (adding repo, pkgs) but then on the *same*
> kernel it was installed with, just tried a reboot, and nothing  : grub
> shows menu, you select kernel and on upper left there is only cursor
> (fixed) and nothing happens ..
> 
> I'll try to diagnose what's the issue as actually that means
troubles
> with family using that laptop :)

Hi Fabian,

an earlyprintk=efi kernel option shows a slowly executed kernel
(at least the output). I disabled the early_microcode dracut option
and rebuilded the initramfs image but no success in booting the kernel
4.18.0-193.6.3.el8_2.x86_64. Unfortunately no more time for more 
heuristics ...

--
Leon

Am 16.06.20 um 22:04 schrieb Fabian Arrotin:
> On 16/06/2020 15:06, Leon Fauster via CentOS wrote:
>> Hi all,
>>
>> I updated a Dell XPS laptop from CentOS 8.1 (1911) to 8.2 (2004).
>>
>> Installed kernels are
>> kernel-4.18.0-147.5.1.el8_1.x86_64
>> kernel-4.18.0-147.8.1.el8_1.x86_64
>> kernel-4.18.0-193.6.3.el8_2.x86_64
>>
>> Unfortunately I can not boot into the latest
>> kernel-4.18.0-193.6.3.el8_2.x86_64.
>>
>> After grub2 screen I only see following line:
>>
>> EFI stub: UEFI Secure Boot is enabled
>>
>> Booting into the older kernel is still possible. The
>> above line appears and after that the normal kernel
>> output scrolls over the screen (rhgb quiet disabled).
>>
>> Is the new kernel correctly signed?
>>
>> What can I do?
>>
>> -- 
>> Thanks
>> Leon
> 
> Hi Leon,
> 
> Don't think that it's due to secureboot, as on my work laptop
(thinkpad
> t490s), I have secureboot on, and kernel working fine.
> 
> OTOH, on my family laptop (also in secureboot mode), when I updated from
> 8.1.1011 to 8.2.2004, laptop became unresponsive during the
> microcode_ctl update (in scriptlet) and after that it auto-reset itself
> , so in the middle of the whole rpm transaction.
> I tried to recover it but it was to a point where it was faster to just
> reinstall from scratch with 8.2.2004, which I did ... and in gnome,
> everything was fine, etc (adding repo, pkgs) but then on the *same*
> kernel it was installed with, just tried a reboot, and nothing  : grub
> shows menu, you select kernel and on upper left there is only cursor
> (fixed) and nothing happens ..
> 
> I'll try to diagnose what's the issue as actually that means
troubles
> with family using that laptop :)

Did you got managed to boot kernel-4.18.0-193.14.2.el8_2 or a newer one?
I must still boot into kernel-4.18.0-147.8.1.el8_1.x86_64 ... and with 
the upcoming new kernel that depends on a new shim and grub2 package I 
wonder about the implications for my XPS hardware ...

--
Thanks,
Leon