thr3ads.net - CentOS - [CentOS] UEFI boot manager sequence problems HP Envy [May 2019]

If this information is useful, please help other people find it:
Share via:

Gary Stainburn

2019-May-28 11:29 UTC

[CentOS] UEFI boot manager sequence problems HP Envy

Morning all,

I have a HP Envy dual boot system (Win8 for serious stuff, i.e. Train Sim and
Flight Sim) and Centos 7 for everything else.

In the past I've had the occasional problem where an update on the windows
side has updated the UEFI boot sequence but using efibootmgr has always fixed
it.

On Friday I discovered that my HDD was failing so I tried using Clonezilla to
move it on to a new SSD of the same size.  Unfortunately the clone didn't
work, failing half way through my main partition.  Thankfully the Windows
partitions and boot info cloned across so that side of the system worked.

I then wiped all the Linux partitions and did a clean C7 install using the
latest ISO, all went well, but when it reboot it went straight into Windows. 
Using F9 on reboot I chose CentOS Linux and the new system booted.  Using
efibootmgr I reset the boot sequence and all looked fine (see below).

Unfortunately, when I then reboot it reverts to booting Windows. Using F9 to get
back into Linux then shows that the boot sequence has reverted.  This means that
the updated sequence either was not stored properly, or something is resetting
it.

Legacy support in the BIOS is turned off as it should be, and the boot sequence
in the BIOS only has a limited number of options. The sequence in the BIOS is:

UEFI Boot Order
  USB Diskette on Key/USB Hard Drive
  OS boot Manager                (shown in white)
  Internal CD/DVD ROM Drive
  USB CD/DVD ROM Drive
  ! Network Adapter

Legacy Boot Order
  Notebook Hard Drive
  Internal CD/DVD ROM Drive
  USB Diskette on Key/USB Hard Drive
  USB CD/DVD ROM Drive
  ! Network Adapter

If I press <F9> I get the same options as in efibootmgr but the first
option "Windows Boot Manager" is selected.

  

[root at gary ~]# efibootmgr
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0002,3002,0000,0003,0004,0005,2001,2002,2003
Boot0000* Linux
Boot0002* Windows Boot Manager
Boot0003* Fedora
Boot0004* CentOS Linux
Boot0005* CentOS
Boot2001* USB Drive (UEFI)
Boot2002* Internal CD/DVD ROM Drive (UEFI)
Boot3000* Internal Hard Disk or Solid State Disk
Boot3002* Internal Hard Disk or Solid State Disk
Boot3004* Internal Hard Disk or Solid State Disk
[root at gary ~]# efibootmgr -o 0004,2001,2002,3000
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0004,2001,2002,3000
Boot0000* Linux
Boot0002* Windows Boot Manager
Boot0003* Fedora
Boot0004* CentOS Linux
Boot0005* CentOS
Boot2001* USB Drive (UEFI)
Boot2002* Internal CD/DVD ROM Drive (UEFI)
Boot3000* Internal Hard Disk or Solid State Disk
Boot3002* Internal Hard Disk or Solid State Disk
Boot3004* Internal Hard Disk or Solid State Disk
[root at gary ~]# efibootmgr
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0004,2001,2002,3000
Boot0000* Linux
Boot0002* Windows Boot Manager
Boot0003* Fedora
Boot0004* CentOS Linux
Boot0005* CentOS
Boot2001* USB Drive (UEFI)
Boot2002* Internal CD/DVD ROM Drive (UEFI)
Boot3000* Internal Hard Disk or Solid State Disk
Boot3002* Internal Hard Disk or Solid State Disk
Boot3004* Internal Hard Disk or Solid State Disk
[root at gary ~]#

Günther J. Niederwimmer

2019-May-28 12:30 UTC

head link

[CentOS] UEFI boot manager sequence problems HP Envy

Hello,

change the bootorder> BootOrder: 0002,3002,0000,0003,0004,0005,2001,2002,2003your first boot is windows


Am Dienstag, 28. Mai 2019, 13:29:39 CEST schrieb Gary
Stainburn:> Morning all,
> 
> I have a HP Envy dual boot system (Win8 for serious stuff, i.e. Train Sim
> and Flight Sim) and Centos 7 for everything else.
> 
> In the past I've had the occasional problem where an update on the
windows
> side has updated the UEFI boot sequence but using efibootmgr has always
> fixed it.
> 
> On Friday I discovered that my HDD was failing so I tried using Clonezilla
> to move it on to a new SSD of the same size.  Unfortunately the clone
> didn't work, failing half way through my main partition.  Thankfully
the
> Windows partitions and boot info cloned across so that side of the system
> worked.
> 
> I then wiped all the Linux partitions and did a clean C7 install using the
> latest ISO, all went well, but when it reboot it went straight into
> Windows.  Using F9 on reboot I chose CentOS Linux and the new system
> booted.  Using efibootmgr I reset the boot sequence and all looked fine
> (see below).
> 
> Unfortunately, when I then reboot it reverts to booting Windows. Using F9
to
> get back into Linux then shows that the boot sequence has reverted.  This
> means that the updated sequence either was not stored properly, or
> something is resetting it.
> 
> Legacy support in the BIOS is turned off as it should be, and the boot
> sequence in the BIOS only has a limited number of options. The sequence in
> the BIOS is:
> 
> UEFI Boot Order
>   USB Diskette on Key/USB Hard Drive
>   OS boot Manager                (shown in white)
>   Internal CD/DVD ROM Drive
>   USB CD/DVD ROM Drive
>   ! Network Adapter
> 
> Legacy Boot Order
>   Notebook Hard Drive
>   Internal CD/DVD ROM Drive
>   USB Diskette on Key/USB Hard Drive
>   USB CD/DVD ROM Drive
>   ! Network Adapter
> 
> If I press <F9> I get the same options as in efibootmgr but the first
option
> "Windows Boot Manager" is selected.
> 
> 
> 
> [root at gary ~]# efibootmgr
> BootCurrent: 0004
> Timeout: 0 seconds
> BootOrder: 0002,3002,0000,0003,0004,0005,2001,2002,2003
> Boot0000* Linux
> Boot0002* Windows Boot Manager
> Boot0003* Fedora
> Boot0004* CentOS Linux
> Boot0005* CentOS
> Boot2001* USB Drive (UEFI)
> Boot2002* Internal CD/DVD ROM Drive (UEFI)
> Boot3000* Internal Hard Disk or Solid State Disk
> Boot3002* Internal Hard Disk or Solid State Disk
> Boot3004* Internal Hard Disk or Solid State Disk
> [root at gary ~]# efibootmgr -o 0004,2001,2002,3000
> BootCurrent: 0004
> Timeout: 0 seconds
> BootOrder: 0004,2001,2002,3000
> Boot0000* Linux
> Boot0002* Windows Boot Manager
> Boot0003* Fedora
> Boot0004* CentOS Linux
> Boot0005* CentOS
> Boot2001* USB Drive (UEFI)
> Boot2002* Internal CD/DVD ROM Drive (UEFI)
> Boot3000* Internal Hard Disk or Solid State Disk
> Boot3002* Internal Hard Disk or Solid State Disk
> Boot3004* Internal Hard Disk or Solid State Disk
> [root at gary ~]# efibootmgr
> BootCurrent: 0004
> Timeout: 0 seconds
> BootOrder: 0004,2001,2002,3000
> Boot0000* Linux
> Boot0002* Windows Boot Manager
> Boot0003* Fedora
> Boot0004* CentOS Linux
> Boot0005* CentOS
> Boot2001* USB Drive (UEFI)
> Boot2002* Internal CD/DVD ROM Drive (UEFI)
> Boot3000* Internal Hard Disk or Solid State Disk
> Boot3002* Internal Hard Disk or Solid State Disk
> Boot3004* Internal Hard Disk or Solid State Disk
> [root at gary ~]#
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> https://lists.centos.org/mailman/listinfo/centos

-- 
mit freundliche Gr??en / best regards,

  G?nther J. Niederwimmer

Gary Stainburn

2019-May-28 13:39 UTC

head link

[CentOS] UEFI boot manager sequence problems HP Envy

On Tuesday 28 May 2019 13:30:44 G?nther J. Niederwimmer
wrote:> Hello,
> 
> change the bootorder
> > BootOrder: 0002,3002,0000,0003,0004,0005,2001,2002,2003
> your first boot is windows
> 
I know, that's my problem.  If you look further down the OP I successfully
change the boot sequence, but it doesn't stay that way

Jonathan Billings

2019-May-28 18:52 UTC

head link

[CentOS] UEFI boot manager sequence problems HP Envy

On Tue, May 28, 2019 at 12:29:39PM +0100, Gary Stainburn
wrote:> I then wiped all the Linux partitions and did a clean C7 install
> using the latest ISO, all went well, but when it reboot it went
> straight into Windows.  Using F9 on reboot I chose CentOS Linux and
> the new system booted.  Using efibootmgr I reset the boot sequence
> and all looked fine (see below). 
> 
> Unfortunately, when I then reboot it reverts to booting
> Windows. Using F9 to get back into Linux then shows that the boot
> sequence has reverted.  This means that the updated sequence either
> was not stored properly, or something is resetting it.
I suggest running 'blkid' and 'efibootmgr -v', and double-check
that
the UUID for the CentOS boot entry matches the UUID of the EFI disk.

You can delete and recreate the boot entry with 'efibootmgr', which
will likely solve the problem.

It depends on the UEFI implementation, but when all the boot entries
are wrong (UUID changed due to new disk) sometimes it has a fallback
to find the Windows bootloader and choose it.

-- 
Jonathan Billings <billings at negate.org>

Gary Stainburn

2019-May-30 09:50 UTC

head link

[CentOS] UEFI boot manager sequence problems HP Envy

On Tuesday 28 May 2019 19:52:02 Jonathan Billings wrote:> I suggest running 'blkid' and 'efibootmgr -v', and
double-check that
> the UUID for the CentOS boot entry matches the UUID of the EFI disk.
> 
> You can delete and recreate the boot entry with 'efibootmgr', which
> will likely solve the problem.
> 
> It depends on the UEFI implementation, but when all the boot entries
> are wrong (UUID changed due to new disk) sometimes it has a fallback
> to find the Windows bootloader and choose it.
> 
Thanks Jonathan.

You're probably right about this as whever I try to do makes has effect.

I've been looking in to efibootmgr to see what I need to do to get it
working but so far with no luck.

When I run it with -v I don't see any UUID details, nor can i see how I
specify them.  One thing I have noticed is that in the blkid output below
everything refers to HD(2,...... Is that correct?

Below is one of many attempts to set the values correctly.

[root at gary ~]# efibootmgr -v
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0002,3002,0000,0003,0004,0005,2001,2002,2003
Boot0000* Linux
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\centos\shim.efi)
Boot0002* Windows Boot Manager 
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0003* Fedora       
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\fedora\shim.efi)
Boot0004* CentOS Linux 
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\centos\shim.efi)
Boot0005* CentOS       
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\centos\shimx64.efi)
Boot2001* USB Drive (UEFI)      RC
Boot2002* Internal CD/DVD ROM Drive (UEFI)      RC
Boot3000* Internal Hard Disk or Solid State Disk        RC
Boot3002* Internal Hard Disk or Solid State Disk        RC
[root at gary ~]# efibootmgr -o 4,2001,2002,2
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0004,2001,2002,0002
Boot0000* Linux
Boot0002* Windows Boot Manager
Boot0003* Fedora
Boot0004* CentOS Linux
Boot0005* CentOS
Boot2001* USB Drive (UEFI)
Boot2002* Internal CD/DVD ROM Drive (UEFI)
Boot3000* Internal Hard Disk or Solid State Disk
Boot3002* Internal Hard Disk or Solid State Disk
[root at gary ~]# efibootmgr -v
BootCurrent: 0004
Timeout: 0 seconds
BootOrder: 0004,2001,2002,0002
Boot0000* Linux
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\centos\shim.efi)
Boot0002* Windows Boot Manager 
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}....................
Boot0003* Fedora       
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\fedora\shim.efi)
Boot0004* CentOS Linux 
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\centos\shim.efi)
Boot0005* CentOS       
HD(2,GPT,14c4ac1d-abd8-4121-84ee-c05a825920de,0x145800,0x64000)/File(\EFI\centos\shimx64.efi)
Boot2001* USB Drive (UEFI)      RC
Boot2002* Internal CD/DVD ROM Drive (UEFI)      RC
Boot3000* Internal Hard Disk or Solid State Disk        RC
Boot3002* Internal Hard Disk or Solid State Disk        RC
[root at gary ~]# blkid
/dev/mapper/centos-root: UUID="08c18076-37b4-4f65-b550-e2633ac24d5d"
TYPE="xfs"
/dev/sda6: UUID="ifEKlz-O4SM-NevI-X4TQ-lQg2-0lAN-Jb7cZQ"
TYPE="LVM2_member"
PARTUUID="97e93e7c-a6cf-4532-8f7d-5c0e50987350"
/dev/sda1: LABEL="WINRE" UUID="8262E42362E41DA3"
TYPE="ntfs" PARTLABEL="Basic data partition"
PARTUUID="277e20d2-ee46-412b-babb-9b2249324ca4"
/dev/sda2: SEC_TYPE="msdos" UUID="1437-B8F4"
TYPE="vfat" PARTLABEL="EFI System Partition"
PARTUUID="14c4ac1d-abd8-4121-84ee-c05a825920de"
/dev/sda3: LABEL="Windows" UUID="1098EFF798EFD96C"
TYPE="ntfs" PARTLABEL="Basic data partition"
PARTUUID="f7cefd8f-73e7-4956-bb96-0c03ea21bff9"
/dev/sda4: UUID="12DC737EDC735B45" TYPE="ntfs"
PARTUUID="95f8994c-a8ad-48f5-9fbb-eda67c56f6e3"
/dev/sda5: UUID="de45b7f8-d072-4f7e-b9be-a62428db3fbb"
TYPE="xfs" PARTUUID="8c00cc67-1063-4889-bdce-6f6259ba1491"
/dev/sda8: LABEL="RECOVERY" UUID="74CCE22FCCE1EAF6"
TYPE="ntfs" PARTLABEL="Basic data partition"
PARTUUID="7c95ff6d-d945-4479-9100-f66aa81a403e"
/dev/mapper/centos-swap: UUID="30ca7d38-a0df-4473-a1d0-dc7a1fd41458"
TYPE="swap"
/dev/mapper/centos-home: UUID="abcedda1-b69b-441e-bced-23a66b2b85f6"
TYPE="xfs"
[root at gary ~]# df
Filesystem              1K-blocks      Used Available Use% Mounted on
/dev/mapper/centos-root  52403200   7424692  44978508  15% /
devtmpfs                  6016292         0   6016292   0% /dev
tmpfs                     6034084         0   6034084   0% /dev/shm
tmpfs                     6034084      9820   6024264   1% /run
tmpfs                     6034084         0   6034084   0% /sys/fs/cgroup
/dev/sda5                 1038336    229176    809160  23% /boot
/dev/sda2                  204576     85252    119324  42% /boot/efi
/dev/mapper/centos-home 688017172 428947768 259069404  63% /home
tmpfs                     1206820         8   1206812   1% /run/user/42
tmpfs                     1206820         0   1206820   0% /run/user/0
[root at gary ~]#

Maybe Matching Threads

Search for more reasonably related threads

CentOS - May 2019 - UEFI boot manager sequence problems HP Envy

[CentOS] UEFI boot manager sequence problems HP Envy

[CentOS] UEFI boot manager sequence problems HP Envy

[CentOS] UEFI boot manager sequence problems HP Envy

[CentOS] UEFI boot manager sequence problems HP Envy

[CentOS] UEFI boot manager sequence problems HP Envy

Maybe Matching Threads