On 4 May 2016 09:11, "John R Pierce" <pierce at hogranch.com>
wrote:>
> On 5/4/2016 12:41 AM, Patrick Begou wrote:
>>
>>
>> Any messages in /var/log/boot.log ?
>
>
> indeed, it appears it tries to mount local file systems BEFORE drbd is
started. because /data isn't mounted, backuppc can't start
either.>
> so do I have to edit the chkconfig priorities in /etc/init.d and recreate
the rc3.d S** and K** scripts so drbd starts earlier?
ugh.>
>
> # cat ore /var/log/boot.log
> Welcome to CentOS
> Starting udev: [ OK ]
> Setting hostname hostname.mydomain.com: [ OK ]
> Setting up Logical Volume Management: 5 logical volume(s) in volume
group "vg_sysdata" now active> 3 logical volume(s) in volume group "vg_sys" now active
> [ OK ]
> Checking filesystems
> /dev/mapper/vg_sys-lv_root: clean, 60004/3276800 files, 4432672/13107200
blocks> /dev/sdb1: clean, 66/128016 files, 198283/512000 blocks
> /dev/mapper/vg_sys-lv_home: clean, 593694/129236992 files,
235674982/516925440 blocks> [ OK ]
> Remounting root filesystem in read-write mode: [ OK ]
> Mounting local filesystems: mount: special device /dev/drbd0 does not
exist> [FAILED]
> Enabling local filesystem quotas: [ OK ]
> Enabling /etc/fstab swaps: [ OK ]
> Entering non-interactive startup
> Calling the system activity data collector (sadc)...
> Starting monitoring for VG vg_sys: 3 logical volume(s) in volume group
"vg_sys" monitored> [ OK ]
> Starting monitoring for VG vg_sysdata: 5 logical volume(s) in volume
group "vg_sysdata" monitored> [ OK ]
> Bringing up loopback interface: [ OK ]
> Bringing up interface eth0:
> Determining IP information for eth0... done.
> [ OK ]
> Starting auditd: [ OK ]
> Starting system logger: [ OK ]
> Enabling ondemand cpu frequency scaling: [ OK ]
> Starting irqbalance: [ OK ]
> Starting rpcbind: [ OK ]
> Starting NFS statd: [ OK ]
> Starting system message bus: [ OK ]
> Starting Avahi daemon... [ OK ]
> NFS filesystems queued to be mounted
> Mounting filesystems: mount: special device /dev/drbd0 does not exist
> [FAILED]
> Starting acpi daemon: [ OK ]
> Starting HAL daemon: [ OK ]
> Starting lm_sensors: loading module ipmi-si adm1021 coretem[ OK ]0
> Retrigger failed udev events [ OK ]
>
>
>
> Rebuilding /boot/initrd-2.6.32-573.22.1.el6.x86_64kdump.img
> Warning: There might not be enough space to save a vmcore.
> The size of UUID=2288bad6-ceb0-4984-bf3d-c57666603495 should be
greater than 49416020 kilo bytes.>
>
> Starting DRBD resources: [ d(main) s(main) n(main) ].
>
>
>
>
> Starting BackupPC: 2016-05-03 09:57:14 Can't create a test hardlink
between a file in /var/lib/BackupPC//pc and /var/lib/BackupPC//cpool.
Either these are different file system> s, or this file system doesn't support hardlinks, or these directories
don't exist, or there is a permissions problem, or the file system is out
of inodes or full. Use df, df -> i, and ls -ld to check each of these possibilities. Quitting...
>
>
You might want to try adding _netdev to the options for /data ... Although
you're still likely to hit the race condition on EL6 ... This is much
simpler on EL7.
A custom init script to check the environment and only mount when ready (or
rc.local for initial testing) ... Set the options to noauto so you still
can have it listed in fstab to make life easier.
The alternative is to add the pacemaker framework and let the cluster stuff
handle it for you.