Tim Dunphy
2015-May-01 11:14 UTC
[CentOS] Could not complete SSL handshake to Amazon EC2 host
> This is strange... > Do you have SSL aktive on both systems? Run nrpr localy without parameters > (this should return some nrpe stats) and check ldd for libssl.I don't seem to have that command. [root at monitor1:~] #find / -name "*nrpr" 2> /dev/null [root at monitor1:~] # And that's on either system. And if I do an ldd on both, this is what I can tell: Server: [root at monitor1:~] #ldd /usr/local/nagios/libexec/check_nrpe linux-vdso.so.1 => (0x00007fffd895d000) * libssl.so.10 => /lib64/libssl.so.10 (0x00007fc61722a000)* * libcrypto.so.10 => /lib64/libcrypto.so.10 (0x00007fc616e43000)* libnsl.so.1 => /lib64/libnsl.so.1 (0x00007fc616c29000) libc.so.6 => /lib64/libc.so.6 (0x00007fc616868000) libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 (0x00007fc61661c000) libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007fc616338000) libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00007fc616134000) libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00007fc615f02000) libdl.so.2 => /lib64/libdl.so.2 (0x00007fc615cfd000) libz.so.1 => /lib64/libz.so.1 (0x00007fc615ae7000) /lib64/ld-linux-x86-64.so.2 (0x00007fc6174a0000) libkrb5support.so.0 => /lib64/libkrb5support.so.0 (0x00007fc6158d8000) libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00007fc6156d3000) libresolv.so.2 => /lib64/libresolv.so.2 (0x00007fc6154b9000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fc61529d000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007fc615077000) libpcre.so.1 => /lib64/libpcre.so.1 (0x00007fc614e16000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fc614bf1000) Client: [root at ops:~] #ldd /usr/local/nagios/libexec/check_nrpe * libssl.so.6 => /lib64/libssl.so.6 (0x00002aaaaaaba000)* * libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002aaaaad08000)* libnsl.so.1 => /lib64/libnsl.so.1 (0x00002aaaab05a000) libc.so.6 => /lib64/libc.so.6 (0x00002aaaab273000) libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 (0x00002aaaab5cc000) libkrb5.so.3 => /usr/lib64/libkrb5.so.3 (0x00002aaaab7fa000) libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00002aaaaba90000) libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 (0x00002aaaabc92000) libdl.so.2 => /lib64/libdl.so.2 (0x00002aaaabeb7000) libz.so.1 => /lib64/libz.so.1 (0x00002aaaac0bc000) /lib64/ld-linux-x86-64.so.2 (0x0000555555554000) libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x0 0002aaaac2d0000) libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00002aaaac4d8000) libresolv.so.2 => /lib64/libresolv.so.2 (0x00002aaaac6db000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00002aaaac8f0000) libsepol.so.1 => /lib64/libsepol.so.1 (0x00002aaaacb09000) So it looks like everything is OK from the SSL end of things. Any other ideas or suggestions? Thanks Tim On Fri, May 1, 2015 at 5:46 AM, Eric Lehmann <e.lehmann88 at gmail.com> wrote:> This is strange... > Do you have SSL aktive on both systems? Run nrpr localy without parameters > (this should return some nrpe stats) and check ldd for libssl. > Am 01.05.2015 07:32 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > > > Hi Eric, > > > > Thanks for your reply. I do have nrpe running under xinetd on the host > I'm > > trying to monitor. > > > > And running the nrpe checl locally: > > > > [root at ops:~] #/usr/local/nagios/libexec/check_nrpe -H localhost > > NRPE v2.15 > > > > [root at ops:~] #grep only_from /etc/xinetd.d/nrpe > > only_from = 127.0.0.1 216.120.248.126 > > > > And I do have port 5666 open on the security group for this host. > > > > And I made sure the local firewall was stopped, because I am blocking > ports > > with the security groups instead. > > > > [root at ops:~] #service iptables status > > Firewall is stopped. > > > > It's only when checking from the monitoring host that nrpe fails: > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > ops.jokefire.com > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > Really, really puzzling. This is driving me up a wall!! I hopeI can solve > > this soon.... > > > > Thanks for any and all help with this one!! > > Tim > > > > On Fri, May 1, 2015 at 1:02 AM, Eric Lehmann <e.lehmann88 at gmail.com> > > wrote: > > > > > Hi > > > Does the deamon run under xinetd? Then you have to configure the > > only_from > > > in */etc/**xinetd.d**/**nrpe* to. > > > > > > Regards > > > Eric > > > Am 01.05.2015 06:46 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > > > > > > > Hello, > > > > > > > > I am trying to monitor a host in the Amazon EC2 cloud. > > > > > > > > Yet when I try to check NRPE from the monitoring host I am getting an > > SSL > > > > handshake error: > > > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > > > ops.jokefire.com > > > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > > > > > And if I telnet into the host on port 5666 to see if the FW port is > > open, > > > > the connection closes right away: > > > > > > > > [root at monitor1:~] #telnet ops.somewhere.com 5666 > > > > Trying 54.225.218.125... > > > > Connected to ops.somewhere.com. > > > > Escape character is '^]'. > > > > Connection closed by foreign host. > > > > > > > > You can see there it connects, but then it closes immediately after > the > > > > connection. > > > > > > > > I have NRPE running on the host I want to monitor: > > > > > > > > [root at ops:~] #lsof -i :5666 > > > > COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME > > > > xinetd 1434 root 5u IPv4 4063 TCP *:nrpe (LISTEN) > > > > > > > > And I have the IP of my nagios server listed in the xinetd conf file: > > > > > > > > [root at ops:~] #cat /etc/xinetd.d/nrpe > > > > # default: on > > > > # description: NRPE (Nagios Remote Plugin Executor) > > > > service nrpe > > > > { > > > > flags = REUSE > > > > socket_type = stream > > > > port = 5666 > > > > wait = no > > > > user = nagios > > > > group = nagios > > > > server = /usr/local/nagios/bin/nrpe > > > > server_args = -c /usr/local/nagios/etc/nrpe.cfg --inetd > > > > log_on_failure += USERID > > > > disable = no > > > > only_from = 127.0.0.1 xx.xx.xx.xx # <- representing > my > > > real > > > > nagios server IP > > > > } > > > > > > > > > > > > > > > > And I have my default security group for that host open on port 5666 > to > > > the > > > > world for this experiment. I plan on locking that down again to the > > > single > > > > IP of my monitoring host once I get this resolved. > > > > > > > > Does anyone have any suggestions on how I can get that problem > solved? > > > > > > > > Thanks, > > > > Tim > > > > > > > > -- > > > > GPG me!! > > > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > > _______________________________________________ > > > > CentOS mailing list > > > > CentOS at centos.org > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > _______________________________________________ > > > CentOS mailing list > > > CentOS at centos.org > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > -- > > GPG me!! > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > _______________________________________________ > > CentOS mailing list > > CentOS at centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >-- GPG me!! gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B
Eero Volotinen
2015-May-01 11:18 UTC
[CentOS] Could not complete SSL handshake to Amazon EC2 host
well. how about trying default setting and running nrped without xinetd. -- Eero 2015-05-01 14:14 GMT+03:00 Tim Dunphy <bluethundr at gmail.com>:> > This is strange... > > Do you have SSL aktive on both systems? Run nrpr localy without > parameters > > (this should return some nrpe stats) and check ldd for libssl. > > > I don't seem to have that command. > > > [root at monitor1:~] #find / -name "*nrpr" 2> /dev/null > [root at monitor1:~] # > > And that's on either system. > > And if I do an ldd on both, this is what I can tell: > > Server: > > [root at monitor1:~] #ldd /usr/local/nagios/libexec/check_nrpe > linux-vdso.so.1 => (0x00007fffd895d000) > * libssl.so.10 => /lib64/libssl.so.10 (0x00007fc61722a000)* > * libcrypto.so.10 => /lib64/libcrypto.so.10 (0x00007fc616e43000)* > libnsl.so.1 => /lib64/libnsl.so.1 (0x00007fc616c29000) > libc.so.6 => /lib64/libc.so.6 (0x00007fc616868000) > libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 > (0x00007fc61661c000) > libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007fc616338000) > libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00007fc616134000) > libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00007fc615f02000) > libdl.so.2 => /lib64/libdl.so.2 (0x00007fc615cfd000) > libz.so.1 => /lib64/libz.so.1 (0x00007fc615ae7000) > /lib64/ld-linux-x86-64.so.2 (0x00007fc6174a0000) > libkrb5support.so.0 => /lib64/libkrb5support.so.0 > (0x00007fc6158d8000) > libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00007fc6156d3000) > libresolv.so.2 => /lib64/libresolv.so.2 (0x00007fc6154b9000) > libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fc61529d000) > libselinux.so.1 => /lib64/libselinux.so.1 (0x00007fc615077000) > libpcre.so.1 => /lib64/libpcre.so.1 (0x00007fc614e16000) > liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fc614bf1000) > > > Client: > > [root at ops:~] #ldd /usr/local/nagios/libexec/check_nrpe > * libssl.so.6 => /lib64/libssl.so.6 (0x00002aaaaaaba000)* > * libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002aaaaad08000)* > libnsl.so.1 => /lib64/libnsl.so.1 (0x00002aaaab05a000) > libc.so.6 => /lib64/libc.so.6 (0x00002aaaab273000) > libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 > (0x00002aaaab5cc000) > libkrb5.so.3 => /usr/lib64/libkrb5.so.3 (0x00002aaaab7fa000) > libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00002aaaaba90000) > libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 > (0x00002aaaabc92000) > libdl.so.2 => /lib64/libdl.so.2 (0x00002aaaabeb7000) > libz.so.1 => /lib64/libz.so.1 (0x00002aaaac0bc000) > /lib64/ld-linux-x86-64.so.2 (0x0000555555554000) > libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x0 > 0002aaaac2d0000) > libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00002aaaac4d8000) > libresolv.so.2 => /lib64/libresolv.so.2 (0x00002aaaac6db000) > libselinux.so.1 => /lib64/libselinux.so.1 (0x00002aaaac8f0000) > libsepol.so.1 => /lib64/libsepol.so.1 (0x00002aaaacb09000) > > > So it looks like everything is OK from the SSL end of things. Any other > ideas or suggestions? > > Thanks > Tim > > On Fri, May 1, 2015 at 5:46 AM, Eric Lehmann <e.lehmann88 at gmail.com> > wrote: > > > This is strange... > > Do you have SSL aktive on both systems? Run nrpr localy without > parameters > > (this should return some nrpe stats) and check ldd for libssl. > > Am 01.05.2015 07:32 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > > > > > Hi Eric, > > > > > > Thanks for your reply. I do have nrpe running under xinetd on the host > > I'm > > > trying to monitor. > > > > > > And running the nrpe checl locally: > > > > > > [root at ops:~] #/usr/local/nagios/libexec/check_nrpe -H localhost > > > NRPE v2.15 > > > > > > [root at ops:~] #grep only_from /etc/xinetd.d/nrpe > > > only_from = 127.0.0.1 216.120.248.126 > > > > > > And I do have port 5666 open on the security group for this host. > > > > > > And I made sure the local firewall was stopped, because I am blocking > > ports > > > with the security groups instead. > > > > > > [root at ops:~] #service iptables status > > > Firewall is stopped. > > > > > > It's only when checking from the monitoring host that nrpe fails: > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > > ops.jokefire.com > > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > > > Really, really puzzling. This is driving me up a wall!! I hopeI can > solve > > > this soon.... > > > > > > Thanks for any and all help with this one!! > > > Tim > > > > > > On Fri, May 1, 2015 at 1:02 AM, Eric Lehmann <e.lehmann88 at gmail.com> > > > wrote: > > > > > > > Hi > > > > Does the deamon run under xinetd? Then you have to configure the > > > only_from > > > > in */etc/**xinetd.d**/**nrpe* to. > > > > > > > > Regards > > > > Eric > > > > Am 01.05.2015 06:46 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > > > > > > > > > Hello, > > > > > > > > > > I am trying to monitor a host in the Amazon EC2 cloud. > > > > > > > > > > Yet when I try to check NRPE from the monitoring host I am getting > an > > > SSL > > > > > handshake error: > > > > > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > > > > ops.jokefire.com > > > > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > > > > > > > And if I telnet into the host on port 5666 to see if the FW port is > > > open, > > > > > the connection closes right away: > > > > > > > > > > [root at monitor1:~] #telnet ops.somewhere.com 5666 > > > > > Trying 54.225.218.125... > > > > > Connected to ops.somewhere.com. > > > > > Escape character is '^]'. > > > > > Connection closed by foreign host. > > > > > > > > > > You can see there it connects, but then it closes immediately after > > the > > > > > connection. > > > > > > > > > > I have NRPE running on the host I want to monitor: > > > > > > > > > > [root at ops:~] #lsof -i :5666 > > > > > COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME > > > > > xinetd 1434 root 5u IPv4 4063 TCP *:nrpe (LISTEN) > > > > > > > > > > And I have the IP of my nagios server listed in the xinetd conf > file: > > > > > > > > > > [root at ops:~] #cat /etc/xinetd.d/nrpe > > > > > # default: on > > > > > # description: NRPE (Nagios Remote Plugin Executor) > > > > > service nrpe > > > > > { > > > > > flags = REUSE > > > > > socket_type = stream > > > > > port = 5666 > > > > > wait = no > > > > > user = nagios > > > > > group = nagios > > > > > server = /usr/local/nagios/bin/nrpe > > > > > server_args = -c /usr/local/nagios/etc/nrpe.cfg --inetd > > > > > log_on_failure += USERID > > > > > disable = no > > > > > only_from = 127.0.0.1 xx.xx.xx.xx # <- representing > > my > > > > real > > > > > nagios server IP > > > > > } > > > > > > > > > > > > > > > > > > > > And I have my default security group for that host open on port > 5666 > > to > > > > the > > > > > world for this experiment. I plan on locking that down again to > the > > > > single > > > > > IP of my monitoring host once I get this resolved. > > > > > > > > > > Does anyone have any suggestions on how I can get that problem > > solved? > > > > > > > > > > Thanks, > > > > > Tim > > > > > > > > > > -- > > > > > GPG me!! > > > > > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > > > _______________________________________________ > > > > > CentOS mailing list > > > > > CentOS at centos.org > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > _______________________________________________ > > > > CentOS mailing list > > > > CentOS at centos.org > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > > > > > > -- > > > GPG me!! > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > _______________________________________________ > > > CentOS mailing list > > > CentOS at centos.org > > > http://lists.centos.org/mailman/listinfo/centos > > > > > _______________________________________________ > > CentOS mailing list > > CentOS at centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > > > > -- > GPG me!! > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >
Eric Lehmann
2015-May-01 11:43 UTC
[CentOS] Could not complete SSL handshake to Amazon EC2 host
Oh my mistake. I mean nrpe without parameters. It should say something about SSL/TLS aktiv or so. You could test nrpe without SSL. Use nrpe -n - H host Am 01.05.2015 13:18 schrieb "Eero Volotinen" <eero.volotinen at iki.fi>:> well. how about trying default setting and running nrped without xinetd. > > -- > Eero > > 2015-05-01 14:14 GMT+03:00 Tim Dunphy <bluethundr at gmail.com>: > > > > This is strange... > > > Do you have SSL aktive on both systems? Run nrpr localy without > > parameters > > > (this should return some nrpe stats) and check ldd for libssl. > > > > > > I don't seem to have that command. > > > > > > [root at monitor1:~] #find / -name "*nrpr" 2> /dev/null > > [root at monitor1:~] # > > > > And that's on either system. > > > > And if I do an ldd on both, this is what I can tell: > > > > Server: > > > > [root at monitor1:~] #ldd /usr/local/nagios/libexec/check_nrpe > > linux-vdso.so.1 => (0x00007fffd895d000) > > * libssl.so.10 => /lib64/libssl.so.10 (0x00007fc61722a000)* > > * libcrypto.so.10 => /lib64/libcrypto.so.10 (0x00007fc616e43000)* > > libnsl.so.1 => /lib64/libnsl.so.1 (0x00007fc616c29000) > > libc.so.6 => /lib64/libc.so.6 (0x00007fc616868000) > > libgssapi_krb5.so.2 => /lib64/libgssapi_krb5.so.2 > > (0x00007fc61661c000) > > libkrb5.so.3 => /lib64/libkrb5.so.3 (0x00007fc616338000) > > libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00007fc616134000) > > libk5crypto.so.3 => /lib64/libk5crypto.so.3 (0x00007fc615f02000) > > libdl.so.2 => /lib64/libdl.so.2 (0x00007fc615cfd000) > > libz.so.1 => /lib64/libz.so.1 (0x00007fc615ae7000) > > /lib64/ld-linux-x86-64.so.2 (0x00007fc6174a0000) > > libkrb5support.so.0 => /lib64/libkrb5support.so.0 > > (0x00007fc6158d8000) > > libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00007fc6156d3000) > > libresolv.so.2 => /lib64/libresolv.so.2 (0x00007fc6154b9000) > > libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fc61529d000) > > libselinux.so.1 => /lib64/libselinux.so.1 (0x00007fc615077000) > > libpcre.so.1 => /lib64/libpcre.so.1 (0x00007fc614e16000) > > liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fc614bf1000) > > > > > > Client: > > > > [root at ops:~] #ldd /usr/local/nagios/libexec/check_nrpe > > * libssl.so.6 => /lib64/libssl.so.6 (0x00002aaaaaaba000)* > > * libcrypto.so.6 => /lib64/libcrypto.so.6 (0x00002aaaaad08000)* > > libnsl.so.1 => /lib64/libnsl.so.1 (0x00002aaaab05a000) > > libc.so.6 => /lib64/libc.so.6 (0x00002aaaab273000) > > libgssapi_krb5.so.2 => /usr/lib64/libgssapi_krb5.so.2 > > (0x00002aaaab5cc000) > > libkrb5.so.3 => /usr/lib64/libkrb5.so.3 (0x00002aaaab7fa000) > > libcom_err.so.2 => /lib64/libcom_err.so.2 (0x00002aaaaba90000) > > libk5crypto.so.3 => /usr/lib64/libk5crypto.so.3 > > (0x00002aaaabc92000) > > libdl.so.2 => /lib64/libdl.so.2 (0x00002aaaabeb7000) > > libz.so.1 => /lib64/libz.so.1 (0x00002aaaac0bc000) > > /lib64/ld-linux-x86-64.so.2 (0x0000555555554000) > > libkrb5support.so.0 => /usr/lib64/libkrb5support.so.0 (0x0 > > 0002aaaac2d0000) > > libkeyutils.so.1 => /lib64/libkeyutils.so.1 (0x00002aaaac4d8000) > > libresolv.so.2 => /lib64/libresolv.so.2 (0x00002aaaac6db000) > > libselinux.so.1 => /lib64/libselinux.so.1 (0x00002aaaac8f0000) > > libsepol.so.1 => /lib64/libsepol.so.1 (0x00002aaaacb09000) > > > > > > So it looks like everything is OK from the SSL end of things. Any other > > ideas or suggestions? > > > > Thanks > > Tim > > > > On Fri, May 1, 2015 at 5:46 AM, Eric Lehmann <e.lehmann88 at gmail.com> > > wrote: > > > > > This is strange... > > > Do you have SSL aktive on both systems? Run nrpr localy without > > parameters > > > (this should return some nrpe stats) and check ldd for libssl. > > > Am 01.05.2015 07:32 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > > > > > > > Hi Eric, > > > > > > > > Thanks for your reply. I do have nrpe running under xinetd on the > host > > > I'm > > > > trying to monitor. > > > > > > > > And running the nrpe checl locally: > > > > > > > > [root at ops:~] #/usr/local/nagios/libexec/check_nrpe -H localhost > > > > NRPE v2.15 > > > > > > > > [root at ops:~] #grep only_from /etc/xinetd.d/nrpe > > > > only_from = 127.0.0.1 216.120.248.126 > > > > > > > > And I do have port 5666 open on the security group for this host. > > > > > > > > And I made sure the local firewall was stopped, because I am blocking > > > ports > > > > with the security groups instead. > > > > > > > > [root at ops:~] #service iptables status > > > > Firewall is stopped. > > > > > > > > It's only when checking from the monitoring host that nrpe fails: > > > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > > > ops.jokefire.com > > > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > > > > > Really, really puzzling. This is driving me up a wall!! I hopeI can > > solve > > > > this soon.... > > > > > > > > Thanks for any and all help with this one!! > > > > Tim > > > > > > > > On Fri, May 1, 2015 at 1:02 AM, Eric Lehmann <e.lehmann88 at gmail.com> > > > > wrote: > > > > > > > > > Hi > > > > > Does the deamon run under xinetd? Then you have to configure the > > > > only_from > > > > > in */etc/**xinetd.d**/**nrpe* to. > > > > > > > > > > Regards > > > > > Eric > > > > > Am 01.05.2015 06:46 schrieb "Tim Dunphy" <bluethundr at gmail.com>: > > > > > > > > > > > Hello, > > > > > > > > > > > > I am trying to monitor a host in the Amazon EC2 cloud. > > > > > > > > > > > > Yet when I try to check NRPE from the monitoring host I am > getting > > an > > > > SSL > > > > > > handshake error: > > > > > > > > > > > > [root at monitor1:~] #/usr/local/nagios/libexec/check_nrpe -H > > > > > > ops.jokefire.com > > > > > > CHECK_NRPE: Error - Could not complete SSL handshake. > > > > > > > > > > > > And if I telnet into the host on port 5666 to see if the FW port > is > > > > open, > > > > > > the connection closes right away: > > > > > > > > > > > > [root at monitor1:~] #telnet ops.somewhere.com 5666 > > > > > > Trying 54.225.218.125... > > > > > > Connected to ops.somewhere.com. > > > > > > Escape character is '^]'. > > > > > > Connection closed by foreign host. > > > > > > > > > > > > You can see there it connects, but then it closes immediately > after > > > the > > > > > > connection. > > > > > > > > > > > > I have NRPE running on the host I want to monitor: > > > > > > > > > > > > [root at ops:~] #lsof -i :5666 > > > > > > COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME > > > > > > xinetd 1434 root 5u IPv4 4063 TCP *:nrpe (LISTEN) > > > > > > > > > > > > And I have the IP of my nagios server listed in the xinetd conf > > file: > > > > > > > > > > > > [root at ops:~] #cat /etc/xinetd.d/nrpe > > > > > > # default: on > > > > > > # description: NRPE (Nagios Remote Plugin Executor) > > > > > > service nrpe > > > > > > { > > > > > > flags = REUSE > > > > > > socket_type = stream > > > > > > port = 5666 > > > > > > wait = no > > > > > > user = nagios > > > > > > group = nagios > > > > > > server = /usr/local/nagios/bin/nrpe > > > > > > server_args = -c /usr/local/nagios/etc/nrpe.cfg > --inetd > > > > > > log_on_failure += USERID > > > > > > disable = no > > > > > > only_from = 127.0.0.1 xx.xx.xx.xx # <- > representing > > > my > > > > > real > > > > > > nagios server IP > > > > > > } > > > > > > > > > > > > > > > > > > > > > > > > And I have my default security group for that host open on port > > 5666 > > > to > > > > > the > > > > > > world for this experiment. I plan on locking that down again to > > the > > > > > single > > > > > > IP of my monitoring host once I get this resolved. > > > > > > > > > > > > Does anyone have any suggestions on how I can get that problem > > > solved? > > > > > > > > > > > > Thanks, > > > > > > Tim > > > > > > > > > > > > -- > > > > > > GPG me!! > > > > > > > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > > > > _______________________________________________ > > > > > > CentOS mailing list > > > > > > CentOS at centos.org > > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > _______________________________________________ > > > > > CentOS mailing list > > > > > CentOS at centos.org > > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > > > > > > > > > > > -- > > > > GPG me!! > > > > > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > > > _______________________________________________ > > > > CentOS mailing list > > > > CentOS at centos.org > > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > _______________________________________________ > > > CentOS mailing list > > > CentOS at centos.org > > > http://lists.centos.org/mailman/listinfo/centos > > > > > > > > > > > -- > > GPG me!! > > > > gpg --keyserver pool.sks-keyservers.net --recv-keys F186197B > > _______________________________________________ > > CentOS mailing list > > CentOS at centos.org > > http://lists.centos.org/mailman/listinfo/centos > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >