I'm trying to get an Elographics serial touchscreen working with CentOS 6.2 using the xorg-x11-drv-elographics driver. Touching the screen will wake it up if the screen has blanked, but it never moves the cursor on the screen. There is also a keyboard and mouse connected while I'm trying to get this going and they are loaded automatically and using the evdev driver. Here are the relevant parts of /etc/X11/xorg.conf: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" RightOf "Screen1" InputDevice "Touchscreen0" "CorePointer" EndSection Section "InputDevice" Identifier "Touchscreen0" Driver "elographics" Option "Device" "/dev/ttyS4" Option "MinX" "0" Option "MaxX" "4000" Option "MinY" "0" Option "MaxY" "4000" Option "SendCoreEvents" "true" Option "ButtonNumber" "1" Option "ScreenNo" "0" Option "DebugLevel" "5" EndSection Here are some extracts from /var/log/Xorg.0.log that show the device appears to be detected correctly: (II) Using input driver 'elographics' for 'Touchscreen0' (II) Loading /usr/lib/xorg/modules/input/elographics_drv.so (**) Option "SendCoreEvents" "true" (**) Option "CorePointer" (**) Touchscreen0: always reports core events (**) Option "Device" "/dev/ttyS4" (**) Option "BaudRate" "9600" (**) Option "StopBits" "1" (**) Option "DataBits" "8" (**) Option "Parity" "None" (**) Option "FlowControl" "None" (**) Elographics X device name: TOUCHSCREEN (**) Option "ScreenNo" "0" (**) Elographics associated screen: 0 (**) Elographics untouch delay: 50 ms (**) Elographics report delay: 10 ms (**) Option "MaxX" "4000" (**) Elographics maximum x position: 4000 (**) Option "MinX" "0" (**) Elographics minimum x position: 0 (**) Option "MaxY" "4000" (**) Elographics maximum y position: 4000 (**) Option "MinY" "0" (**) Elographics minimum y position: 0 (**) Option "DebugLevel" "5" (**) Elographics debug level sets to 5 (**) Elographics device will work in Landscape mode (II) XINPUT: Adding extended input device "TOUCHSCREEN" (type: Elographics TouchScreen) Elographics touchscreen init... Done. (**) TOUCHSCREEN: (accel) keeping acceleration scheme 1 (**) TOUCHSCREEN: (accel) acceleration profile 0 (**) TOUCHSCREEN: (accel) acceleration factor: 2.000 (**) TOUCHSCREEN: (accel) acceleration threshold: 4 Elographics touchscreen on... Elographics touchscreen opening : /dev/ttyS4 (--) Elographics touchscreen is a Intellitouch, connected through a serial link. (--) The controller is a model E271-2200, firmware revision 2.1. (--) Additional features: (--) External A/D converter (--) Z axis active Touching the screen produces a lot of debug information including lines such as: TouchScreen: x(1861), y(605), Press TouchScreen: x(1859), y(608), Stream TouchScreen: x(1848), y(624), Release So it appears that the driver is communicating with the device OK, but why doesn't it control the cursor?