Guys, attached is copy of both the i) /etc/sysconfig/syslog
ii) /etc/syslog.conf
I have a Centos ver5.3
The syslog is not working and also I installed Webmin, also it does not
work,
this is what the error is "
Info Internet Explorer cannot display the webpage "
icon
Thanks
1.
[root at bart ~]# cat /etc/sysconfig/syslog
# Options to syslogd
# -m 0 disables 'MARK' messages.
# -r enables logging from remote machines
# -x disables DNS lookups on messages recieved with -r
# See syslogd(8) for more details
SYSLOGD_OPTIONS="-m0 -r"
# Options to klogd
# -2 prints all kernel oops messages twice; once for klogd to decode, and
# once for processing with 'ksymoops'
# -x disables all klogd processing of oops messages entirely
# See klogd(8) for more details
KLOGD_OPTIONS="-x"
#
SYSLOG_UMASK=077
# set this to a umask value to use for all log files as in umask(1).
# By default, all permissions are removed for "group" and
"other".
2
[root at bart ~]# cat /etc/syslog.conf
# Log all kernel messages to the console.
# Logging much else clutters up the screen.
#kern.* /dev/console
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;news.none;authpriv.none;cron.none
/var/log/messages
# The authpriv file has restricted access.
authpriv.* /var/log/secure
# Log all the mail messages in one place.
mail.* -/var/log/maillog
# TIM stuff
*.*;local7.debug;local4.warnings /var/log/tim
# Cisco Stuff
local7.* /var/log/cisco
# Log cron stuff
cron.* /var/log/cron
# Everybody gets emergency messages
*.emerg *
# Save news errors of level crit and higher in a special file.
uucp,news.crit /var/log/spooler
# Save boot messages also to boot.log
local7.* /var/log/boot.log
#
# INN
#
news.=crit /var/log/news/news.crit
news.=err /var/log/news/news.err
news.notice /var/log/news/news.notice
[root at bart ~]#
3
[root at bart ~]# ls
anaconda-ks.cfg install.log webmin-1.490-1.noarch.rpm
Desktop install.log.syslog
firstboot.1256071953.31 tim.txt
[root at bart ~]#
====================================Tim Davis PMP, CCNP, CNE-5
CBCA
10900 Hampshire Ave. S.
Bloomington, MN 55438
tim_davis at cbca.com
http://twitter.com/tdalago
952-903-6304
====================
NOTICE: The information contained in this electronic message, and any
attachments accompanying this transmission, may be legally privileged and/or
confidential and protected health information. This information is intended only
for the use of the individual(s) and/or entity identified above. The authorized
recipient of this information is prohibited from disclosing this information to
any other party unless required to do so by law or regulation and is required to
protect the information after its stated need has been fulfilled.
If you are not the intended recipient, or an employee or agent responsible to
deliver it to the intended recipient, you are hereby notified that any
disclosure, printing, copying, forwarding, or distributing of this information
is strictly prohibited.
If you have received this communication in error, please notify the sender
immediately, by telephone or return fax/email, to advise of wrongful receipt and
confirm your understanding of this Notice. Thank You.
On Friday 30 October 2009 16:34, Tim_Davis at cbca.com wrote:> The syslog is not workingIs it rumnning? check it with ps -ef | grep syslogd> and also I installed Webmin, also it does not > work, > this is what the error is " > > Info Internet Explorer cannot display the webpage " > iconHow are you logging into webmin? url? -- Regards Robert Linux User #296285 http://counter.li.org
On Fri, 2009-10-30 at 15:34 -0500, Tim_Davis at cbca.com wrote:> Guys, attached is copy of both the i) /etc/sysconfig/syslog > ii) /etc/syslog.conf > I have a Centos ver5.3 > > The syslog is not working and also I installed Webmin, also it does not > work, > this is what the error is " > > Info Internet Explorer cannot display the webpage " > icon > > > Thanks > 1. > [root at bart ~]# cat /etc/sysconfig/syslog > # Options to syslogd > # -m 0 disables 'MARK' messages. > # -r enables logging from remote machines > # -x disables DNS lookups on messages recieved with -r > # See syslogd(8) for more details > SYSLOGD_OPTIONS="-m0 -r" > # Options to klogd > # -2 prints all kernel oops messages twice; once for klogd to decode, and > # once for processing with 'ksymoops' > # -x disables all klogd processing of oops messages entirely > # See klogd(8) for more details > KLOGD_OPTIONS="-x" > # > SYSLOG_UMASK=077 > # set this to a umask value to use for all log files as in umask(1). > # By default, all permissions are removed for "group" and "other". > > 2 > [root at bart ~]# cat /etc/syslog.conf > # Log all kernel messages to the console. > # Logging much else clutters up the screen. > #kern.* /dev/console > > # Log anything (except mail) of level info or higher. > # Don't log private authentication messages! > *.info;mail.none;news.none;authpriv.none;cron.none > /var/log/messages > > # The authpriv file has restricted access. > authpriv.* /var/log/secure > > # Log all the mail messages in one place. > mail.* -/var/log/maillog > > # TIM stuff > *.*;local7.debug;local4.warnings /var/log/tim > > # Cisco Stuff > local7.* /var/log/cisco > > # Log cron stuff > cron.* /var/log/cron > > # Everybody gets emergency messages > *.emerg * > > # Save news errors of level crit and higher in a special file. > uucp,news.crit /var/log/spooler > > # Save boot messages also to boot.log > local7.* /var/log/boot.log > > # > # INN > # > news.=crit /var/log/news/news.crit > news.=err /var/log/news/news.err > news.notice /var/log/news/news.notice > [root at bart ~]# > > 3 > > [root at bart ~]# ls > anaconda-ks.cfg install.log webmin-1.490-1.noarch.rpm > Desktop install.log.syslog > firstboot.1256071953.31 tim.txt > [root at bart ~]#---- 1 - did you restart syslog after making changes? /sbin/service sysylog restart 2 - is webmin running ? # netstat -an |grep 10000 tcp 0 0 0.0.0.0:10000 0.0.0.0:* LISTEN udp 0 0 0.0.0.0:10000 0.0.0.0:* assuming that you are running IE on a Windows computer (not on the CentOS server), did you access via? http://IP_ADDRESS_OF_CENTOS_SERVER:10000 ^^^^ ^^^^^^^ || || || webmin uses port 1000 http unless you had perl-Net-SSLeay package installed and then it would be https Craig -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.