Hi all,
Does anyone know of any issues with a dell poweredge 860?
I have one and the NMI number is getting high.
I have a digium card in the box and the NMI grows with or without the
card in the box.
Any ideas? its fully updated. x86-64 5.2 system.
Thanks,
Jerry
more /proc/interrupts
CPU0 CPU1
0: 555498463 0 IO-APIC-edge timer
1: 10 675 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 134 199 IO-APIC-edge i8042
14: 39 0 IO-APIC-edge ide0
50: 7629 11537665 IO-APIC-level uhci_hcd:usb1,
ehci_hcd:usb4, libata
66: 9326 555457273 IO-APIC-level wct2xxp
169: 294 4561400 IO-APIC-level eth0
177: 0 0 IO-APIC-level uhci_hcd:usb2
185: 0 0 IO-APIC-level uhci_hcd:usb3
NMI: 214609 220298
LOC: 550322710 550322638
ERR: 0
MIS: 0
lspci is:
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
02:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A (rev 09)
03:02.0 Communication controller: Digium, Inc. Wildcard TE210P dual-span
T1/E1/J1 card 3.3V (rev 02)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
06:05.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
on 2-23-2009 3:54 PM Jerry Geis spake the following:> Hi all, > > Does anyone know of any issues with a dell poweredge 860? > > I have one and the NMI number is getting high. > I have a digium card in the box and the NMI grows with or without the > card in the box. > > Any ideas? its fully updated. x86-64 5.2 system. > Thanks, >Is the system in production or can you take some time to pull all cards and memory, and test by slowly adding parts? If I remember correctly NMI''s can only be generated by hardware. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don''t!!!! -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 258 bytes Desc: OpenPGP digital signature Url : http://lists.centos.org/pipermail/centos/attachments/20090223/39dea194/attachment.bin
Anyone knows any Cisco netflow analyzer that could run on Linux/Windows? I know that cisco ASDM works at somewhat level but too rough... For example, CIsco ASDM can only shows at IP level and only three types graph, like top 10 source Address, top ten destination level, or top ten services. but I want the analyzer to show different traffics from the same box when in need. Any suggestions? Thanks --Robinson --- On Mon, 2/23/09, Jerry Geis <geisj at pagestation.com> wrote:> From: Jerry Geis <geisj at pagestation.com> > Subject: [CentOS] dell poweredge 860 > To: "CentOS ML" <centos at centos.org> > Date: Monday, February 23, 2009, 6:54 PM > Hi all, > > Does anyone know of any issues with a dell poweredge 860? > > I have one and the NMI number is getting high. > I have a digium card in the box and the NMI grows with or > without the > card in the box. > > Any ideas? its fully updated. x86-64 5.2 system. > Thanks, > > Jerry > > more /proc/interrupts > CPU0 CPU1 > 0: 555498463 0 IO-APIC-edge timer > 1: 10 675 IO-APIC-edge i8042 > 8: 1 0 IO-APIC-edge rtc > 9: 0 0 IO-APIC-level acpi > 12: 134 199 IO-APIC-edge i8042 > 14: 39 0 IO-APIC-edge ide0 > 50: 7629 11537665 IO-APIC-level uhci_hcd:usb1, > ehci_hcd:usb4, libata > 66: 9326 555457273 IO-APIC-level wct2xxp > 169: 294 4561400 IO-APIC-level eth0 > 177: 0 0 IO-APIC-level uhci_hcd:usb2 > 185: 0 0 IO-APIC-level uhci_hcd:usb3 > NMI: 214609 220298 > LOC: 550322710 550322638 > ERR: 0 > MIS: 0 > > > lspci is: > 00:00.0 Host bridge: Intel Corporation E7230/3000/3010 > Memory Controller Hub > 00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI > Express Root Port > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) > PCI Express > Port 1 (rev 01) > 00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 > Family) PCI > Express Port 5 (rev 01) > 00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 > Family) PCI > Express Port 6 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB UHCI > Controller #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB UHCI > Controller #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB UHCI > Controller #3 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 > Family) USB2 EHCI > Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev > e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 > Family) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 > Family) IDE > Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH > (ICH7 Family) > SATA IDE Controller (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus > Controller > (rev 01) > 02:00.0 PCI bridge: Intel Corporation 6702PXH PCI > Express-to-PCI Bridge > A (rev 09) > 03:02.0 Communication controller: Digium, Inc. Wildcard > TE210P dual-span > T1/E1/J1 card 3.3V (rev 02) > 04:00.0 Ethernet controller: Broadcom Corporation NetXtreme > BCM5721 > Gigabit Ethernet PCI Express (rev 11) > 05:00.0 Ethernet controller: Broadcom Corporation NetXtreme > BCM5721 > Gigabit Ethernet PCI Express (rev 11) > 06:05.0 VGA compatible controller: ATI Technologies Inc > ES1000 (rev 02) > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos
> > Is the system in production or can you take some time to pull all cards and > memory, and test by slowly adding parts? > > If I remember correctly NMI''s can only be generated by hardware. >Scott, The only card I added was the digium card. It has been removed and the NMI''s still were increasing. I didnt know memory could cause an NMI... What do you suggest taking out some of the RAM, booting up and checking it, then swapping the RAM and boot up again? Jerry
on 2-23-2009 4:25 PM Jerry Geis spake the following:>> Is the system in production or can you take some time to pull all cards and >> memory, and test by slowly adding parts? >> >> If I remember correctly NMI''s can only be generated by hardware. >> > Scott, > > The only card I added was the digium card. It has been removed and the > NMI''s still were increasing. > I didnt know memory could cause an NMI... > What do you suggest taking out some of the RAM, booting up and checking > it, then > swapping the RAM and boot up again? > > JerryThere are no other cards, network etc? With ECC memory, bad chips could cause an NMI, as could overheating or a loose riser card or just bad ram contact in the slots. If the system has enough memory to still boot with some removed, you could try there. You could also run Dell diagnostics on it. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don''t!!!! -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 258 bytes Desc: OpenPGP digital signature Url : http://lists.centos.org/pipermail/centos/attachments/20090223/ecc0d621/attachment.bin
Robinson Tiemuqinke wrote:> Anyone knows any Cisco netflow analyzer that could run on Linux/Windows? I > know that cisco ASDM works at somewhat level but too rough... > > For example, CIsco ASDM can only shows at IP level and only three types > graph, like top 10 source Address, top ten destination level, or top ten > services. but I want the analyzer to show different traffics from the same > box when in need.ntop can read netflow events, the server runs in linux(maybe works in windows too),the client is browser-based so you can access it from almost anywhere.. netflow is somewhat restricted as far as what info you can get, I''ve only used sflow, a brief comparison of the protocols is at the bottom of this pdf: http://www.sflow.org/sFlowOverview.pdf ntop can read sflow as well, though last time I tried it it was unstable, I used sflowtrend instead. nate
Jerry Geis wrote:> Hi all, > > Does anyone know of any issues with a dell poweredge 860? > > I have one and the NMI number is getting high. > I have a digium card in the box and the NMI grows with or without the > card in the box.Is it causing a problem? I just checked a half dozen systems, all of them have pretty high NMI counters in /proc/interrupts(e.g. 254947480), and all of them are incrementing at least every second. No noticeable problems. Some of the systems are 3 years old, one of them is so new it''s not even available for sale until next month. nate
> > Jerry Geis wrote: > >/ Hi all, > />/ > />/ Does anyone know of any issues with a dell poweredge 860? > />/ > />/ I have one and the NMI number is getting high. > />/ I have a digium card in the box and the NMI grows with or without the > />/ card in the box. > / > Is it causing a problem? I just checked a half dozen systems, all > of them have pretty high NMI counters in /proc/interrupts(e.g. > 254947480), and all of them are incrementing at least every > second. No noticeable problems. Some of the systems are 3 years > old, one of them is so new it''s not even available for sale until > next month. > > nate >nate, I am getting feedback that the digium card is not working. I called digium support and they are indicating the the NMI''s are an issue. I had never heard of that. so thats why I am inquiring. The issue I am having is a call is placed on the digium card (T1), a phone rings, when the phone is answered there is nothing. That is the symptoms. Digium had logged in and did what ever they do and they are thinking the NMI is an issue. Jerry
On Mon, 2009-02-23 at 17:56 -0800, nate wrote:> Jerry Geis wrote: > > Hi all, > > > > Does anyone know of any issues with a dell poweredge 860? > > > > I have one and the NMI number is getting high. > > I have a digium card in the box and the NMI grows with or without the > > card in the box. > > Is it causing a problem? I just checked a half dozen systems, all > of them have pretty high NMI counters in /proc/interrupts(e.g. > 254947480), and all of them are incrementing at least every > second. No noticeable problems. Some of the systems are 3 years > old, one of them is so new it''s not even available for sale until > next month. > > nate > <snip sig stuff>I also believe that a high NMI count, in and of itself, is not an issue, nor necessarily and indication of one. IIRC, Non-Maskable Interrupts are ones that must be dispatched immediately, not queued for handling. Hardware events that cause these interrupts, IIRC, include the hardware clock, HDs, serial devices, etc. Thinking just of the hardware clock alone you can see how NMI counts would always be increasing. I''d suggest doing what Nate did: look at some other systems to see what happens to their counts over a brief time and see if yours looks reasonable. As also suggested, a better approach is the diagnostic software. After-market vendors are notorious for crappy 1st level support. It''s not surprising the they suspect NMIs might be the problem. You might end up spending some real time before the failure is properly identified and rectified. HTH -- Bill
These are the results of the diag from dell.
201 Status: WarningThe following PCI devices share the same IRQ -
[Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1]:[Intel
Corporation 82801G (ICH7 Family) USB2 EHCI Controller] Irq: 50.
201 Status: WarningThe following PCI devices share the same IRQ -
[Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1]:[Intel
Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller] Irq: 50.
400 Status: WarningFor the device ATI Technologies Inc ES1000, the
system reported the following status: Currently, this device is not
using its IRQ.
I am running centos 5.2 x86_64
00:00.0 Host bridge: Intel Corporation E7230/3000/3010 Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation E7230/3000/3010 PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI
Express Port 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC
Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family)
SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller
(rev 01)
02:00.0 PCI bridge: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A (rev 09)
03:02.0 Communication controller: Digium, Inc. Wildcard TE210P dual-span
T1/E1/J1 card 3.3V (rev 02)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
05:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5721
Gigabit Ethernet PCI Express (rev 11)
06:05.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)
more /proc/interrupts
CPU0 CPU1
0: 8956830 0 IO-APIC-edge timer
1: 10 299 IO-APIC-edge i8042
8: 1 0 IO-APIC-edge rtc
9: 0 0 IO-APIC-level acpi
12: 134 15803 IO-APIC-edge i8042
14: 39 0 IO-APIC-edge ide0
50: 34754 350640 IO-APIC-level uhci_hcd:usb1,
ehci_hcd:usb4, libata
66: 9562 8869833 IO-APIC-level wct2xxp
169: 87 190208 IO-APIC-level eth0
177: 0 0 IO-APIC-level uhci_hcd:usb2
185: 0 0 IO-APIC-level uhci_hcd:usb3
NMI: 598 722
LOC: 8800591 8800519
ERR: 0
MIS: 0
THe machine has 2 onboard NICS. I am only using eth0. eth1 has ONBOOT=no
What would be my next step? I dont think these items should be bothering
a digium card?
Thanks,
Jerry
On Mon, Feb 23, 2009 at 7:23 PM, Robinson Tiemuqinke <hahaha_30k at yahoo.com> wrote:> Anyone knows any Cisco netflow analyzer that could run on Linux/Windows? I know that cisco ASDM works at somewhat level but too rough... > > For example, CIsco ASDM can only shows at IP level and only three types graph, like top 10 source Address, top ten destination level, or top ten services. but I want the analyzer to show different traffics from the same box when in need. > > Any suggestions? ThanksYou could check this out: http://www.solarwinds.com/products/orion/nta/