Hi Lucian, It seems to be upstream libvirt-1.2.15-2 with options with_xen and with_libxl enabled. http://cbs.centos.org/koji/buildinfo?buildID=1348 Regards, Jean-Marc Le 28/10/2015 09:38, Nux! a ?crit :> Pasi, > > Where are these RPMs, how are they built, what exactly are the differences vs the stock ones? > > Regards, > Lucian > > -- > Sent from the Delta quadrant using Borg technology! > > Nux! > www.nux.ro > > ----- Original Message ----- >> From: "Pasi K?rkk?inen" <pasik at iki.fi> >> To: "Discussion about the virtualization on CentOS" <centos-virt at centos.org> >> Sent: Wednesday, 28 October, 2015 08:36:18 >> Subject: Re: [CentOS-virt] Libvirt enhancement requests >> On Tue, Oct 27, 2015 at 05:19:16PM +0000, Nux! wrote: >>> To clarify my own request: >>> >>> RBD (for CEPH) support is available in the version bundled in RHEL 7.2 Beta, so >>> we'll have it in CentOS 7.2 (or whatever will be the identifying number). >>> >>> The hooks seems just like a matter of creating files in the correct location. >>> >>> ..So, all is good in the world once again. >>> >> Except the VirtSIG provides a different version/build of libvirt rpms, so we >> still need to enable RBD/Ceph support separately in VirtSIG provided version.. >> >> >> -- Pasi >> >>> Regards, >>> Lucian >>> >>> -- >>> Sent from the Delta quadrant using Borg technology! >>> >>> Nux! >>> www.nux.ro >>> >>> ----- Original Message ----- >>>> From: "Nux!" <nux at li.nux.ro> >>>> To: "Discussion about the virtualization on CentOS" <centos-virt at centos.org> >>>> Sent: Tuesday, 27 October, 2015 15:22:27 >>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>> So... how exactly do we proceed? >>>> >>>> Anyone from the Virt SIG, please stand up? >>>> >>>> -- >>>> Sent from the Delta quadrant using Borg technology! >>>> >>>> Nux! >>>> www.nux.ro >>>> >>>> ----- Original Message ----- >>>>> From: "Pasi K?rkk?inen" <pasik at iki.fi> >>>>> To: "Discussion about the virtualization on CentOS" <centos-virt at centos.org> >>>>> Sent: Sunday, 25 October, 2015 11:02:22 >>>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>>> On Wed, Oct 21, 2015 at 05:44:20PM +0100, Nux! wrote: >>>>>> Hi folks, >>>>>> >>>>> Hi, >>>>> >>>>>> I know you're rebuilding livbirt for the SIG. Would it be possible to enable RBD >>>>>> support in it? >>>>>> >>>>> Yes, we should definitely enable RBD / Ceph support in libvirt! >>>>> >>>>> >>>>> >>>>>> I know quite a few cases (in the Cloudstack community) that switched to Ubuntu >>>>>> particularly because CEPH support was missing. >>>>>> The recommendation is to rebuild the rpms, but this is not a viable thing for >>>>>> everyone. E.g. >>>>>> http://blog.widodh.nl/2015/04/rebuilding-libvirt-under-centos-7-1-with-rbd-storage-pool-support/ >>>>>> >>>>>> Another thing that I noticed on the CentOS ml recently is an alleged lack of >>>>>> hooks, https://www.libvirt.org/hooks.html >>>>>> >>>>>> And last but not least, where could I find the libvirt (s)rpms that the SIG >>>>>> produces? >>>>>> >>>>>> Lucian >>>>>> >>>>> >>>>> -- Pasi >>>>> >>>>> _______________________________________________ >>>>> CentOS-virt mailing list >>>>> CentOS-virt at centos.org >>>>> https://lists.centos.org/mailman/listinfo/centos-virt >>> _______________________________________________ >>> CentOS-virt mailing list >>> CentOS-virt at centos.org >>> https://lists.centos.org/mailman/listinfo/centos-virt >> _______________________________________________ >> CentOS-virt mailing list >> CentOS-virt at centos.org >> https://lists.centos.org/mailman/listinfo/centos-virt > _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > https://lists.centos.org/mailman/listinfo/centos-virt
On 10/31/2015 04:34 PM, Jean-Marc LIGER wrote:> Hi Lucian, > > It seems to be upstream libvirt-1.2.15-2 with options with_xen and > with_libxl enabled. > http://cbs.centos.org/koji/buildinfo?buildID=1348 >Right, and we can use that version, or a newer one and enable rbd as well. The next question is, is there a difference between the generic rbd and building against ceph-devel. (As in, is one ceph only and the other generic only or can you use both when built against ceph-devel, etc) Since qemu-kvm-ev enables ceph, if we can also enable ceph in libvirt, seems like a win to me, if it also does rbd the same as building against librados2-devel and librbd1-devel. These may only work with CentOS 7 as well .. have to look at if those build in CentOS 6.7. Thoughts? Thanks, Johnny Hughes> Regards, > Jean-Marc > > Le 28/10/2015 09:38, Nux! a ?crit : >> Pasi, >> >> Where are these RPMs, how are they built, what exactly are the >> differences vs the stock ones? >> >> Regards, >> Lucian >> >> -- >> Sent from the Delta quadrant using Borg technology! >> >> Nux! >> www.nux.ro >> >> ----- Original Message ----- >>> From: "Pasi K?rkk?inen" <pasik at iki.fi> >>> To: "Discussion about the virtualization on CentOS" >>> <centos-virt at centos.org> >>> Sent: Wednesday, 28 October, 2015 08:36:18 >>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>> On Tue, Oct 27, 2015 at 05:19:16PM +0000, Nux! wrote: >>>> To clarify my own request: >>>> >>>> RBD (for CEPH) support is available in the version bundled in RHEL >>>> 7.2 Beta, so >>>> we'll have it in CentOS 7.2 (or whatever will be the identifying >>>> number). >>>> >>>> The hooks seems just like a matter of creating files in the correct >>>> location. >>>> >>>> ..So, all is good in the world once again. >>>> >>> Except the VirtSIG provides a different version/build of libvirt >>> rpms, so we >>> still need to enable RBD/Ceph support separately in VirtSIG provided >>> version.. >>> >>> >>> -- Pasi >>> >>>> Regards, >>>> Lucian >>>> >>>> -- >>>> Sent from the Delta quadrant using Borg technology! >>>> >>>> Nux! >>>> www.nux.ro >>>> >>>> ----- Original Message ----- >>>>> From: "Nux!" <nux at li.nux.ro> >>>>> To: "Discussion about the virtualization on CentOS" >>>>> <centos-virt at centos.org> >>>>> Sent: Tuesday, 27 October, 2015 15:22:27 >>>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>>> So... how exactly do we proceed? >>>>> >>>>> Anyone from the Virt SIG, please stand up? >>>>> >>>>> -- >>>>> Sent from the Delta quadrant using Borg technology! >>>>> >>>>> Nux! >>>>> www.nux.ro >>>>> >>>>> ----- Original Message ----- >>>>>> From: "Pasi K?rkk?inen" <pasik at iki.fi> >>>>>> To: "Discussion about the virtualization on CentOS" >>>>>> <centos-virt at centos.org> >>>>>> Sent: Sunday, 25 October, 2015 11:02:22 >>>>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>>>> On Wed, Oct 21, 2015 at 05:44:20PM +0100, Nux! wrote: >>>>>>> Hi folks, >>>>>>> >>>>>> Hi, >>>>>> >>>>>>> I know you're rebuilding livbirt for the SIG. Would it be >>>>>>> possible to enable RBD >>>>>>> support in it? >>>>>>> >>>>>> Yes, we should definitely enable RBD / Ceph support in libvirt! >>>>>> >>>>>> >>>>>> >>>>>>> I know quite a few cases (in the Cloudstack community) that >>>>>>> switched to Ubuntu >>>>>>> particularly because CEPH support was missing. >>>>>>> The recommendation is to rebuild the rpms, but this is not a >>>>>>> viable thing for >>>>>>> everyone. E.g. >>>>>>> http://blog.widodh.nl/2015/04/rebuilding-libvirt-under-centos-7-1-with-rbd-storage-pool-support/ >>>>>>> >>>>>>> >>>>>>> Another thing that I noticed on the CentOS ml recently is an >>>>>>> alleged lack of >>>>>>> hooks, https://www.libvirt.org/hooks.html >>>>>>> >>>>>>> And last but not least, where could I find the libvirt (s)rpms >>>>>>> that the SIG >>>>>>> produces? >>>>>>> >>>>>>> Lucian >>>>>>> >>>>>> >>>>>> -- Pasi-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20151102/abf3453f/attachment.sig>
Jean-Marc LIGER
2015-Nov-02 23:40 UTC
[CentOS-virt] Libvirt enhancement requests http://libvirt.org/sources/
Le 02/11/2015 18:28, Johnny Hughes a ?crit :> On 10/31/2015 04:34 PM, Jean-Marc LIGER wrote: >> Hi Lucian, >> >> It seems to be upstream libvirt-1.2.15-2 with options with_xen and >> with_libxl enabled. >> http://cbs.centos.org/koji/buildinfo?buildID=1348 >> > Right, and we can use that version, or a newer one and enable rbd as well.You might use this preview one : http://people.redhat.com/~rjones/libguestfs-RHEL-7.2-preview/libvirt-1.2.17-3.el7.src.rpm I personally rebuild libvirt from last official releases which enable ceph by default for el7 : http://libvirt.org/sources/ My dogfooding tests still **can be found here : https://copr.fedoraproject.org/coprs/jmliger/virt7-upstream/> The next question is, is there a difference between the generic rbd and > building against ceph-devel. (As in, is one ceph only and the other > generic only or can you use both when built against ceph-devel, etc) > > Since qemu-kvm-ev enables ceph, if we can also enable ceph in libvirt, > seems like a win to me, if it also does rbd the same as building against > librados2-devel and librbd1-devel.Maybe I'm wrong but ceph-devel seems to have been replaced by librados2-devel and librbd1-devel in el7.> These may only work with CentOS 7 as well .. have to look at if those > build in CentOS 6.7.Which ceph release forCentOS 6.7Hammer or Firefly ? Jean-Marc Liger> Thoughts? > > Thanks, > Johnny Hughes > > >> Regards, >> Jean-Marc >> >> Le 28/10/2015 09:38, Nux! a ?crit : >>> Pasi, >>> >>> Where are these RPMs, how are they built, what exactly are the >>> differences vs the stock ones? >>> >>> Regards, >>> Lucian >>> >>> -- >>> Sent from the Delta quadrant using Borg technology! >>> >>> Nux! >>> www.nux.ro >>> >>> ----- Original Message ----- >>>> From: "Pasi K?rkk?inen" <pasik at iki.fi> >>>> To: "Discussion about the virtualization on CentOS" >>>> <centos-virt at centos.org> >>>> Sent: Wednesday, 28 October, 2015 08:36:18 >>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>> On Tue, Oct 27, 2015 at 05:19:16PM +0000, Nux! wrote: >>>>> To clarify my own request: >>>>> >>>>> RBD (for CEPH) support is available in the version bundled in RHEL >>>>> 7.2 Beta, so >>>>> we'll have it in CentOS 7.2 (or whatever will be the identifying >>>>> number). >>>>> >>>>> The hooks seems just like a matter of creating files in the correct >>>>> location. >>>>> >>>>> ..So, all is good in the world once again. >>>>> >>>> Except the VirtSIG provides a different version/build of libvirt >>>> rpms, so we >>>> still need to enable RBD/Ceph support separately in VirtSIG provided >>>> version.. >>>> >>>> >>>> -- Pasi >>>> >>>>> Regards, >>>>> Lucian >>>>> >>>>> -- >>>>> Sent from the Delta quadrant using Borg technology! >>>>> >>>>> Nux! >>>>> www.nux.ro >>>>> >>>>> ----- Original Message ----- >>>>>> From: "Nux!" <nux at li.nux.ro> >>>>>> To: "Discussion about the virtualization on CentOS" >>>>>> <centos-virt at centos.org> >>>>>> Sent: Tuesday, 27 October, 2015 15:22:27 >>>>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>>>> So... how exactly do we proceed? >>>>>> >>>>>> Anyone from the Virt SIG, please stand up? >>>>>> >>>>>> -- >>>>>> Sent from the Delta quadrant using Borg technology! >>>>>> >>>>>> Nux! >>>>>> www.nux.ro >>>>>> >>>>>> ----- Original Message ----- >>>>>>> From: "Pasi K?rkk?inen" <pasik at iki.fi> >>>>>>> To: "Discussion about the virtualization on CentOS" >>>>>>> <centos-virt at centos.org> >>>>>>> Sent: Sunday, 25 October, 2015 11:02:22 >>>>>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>>>>> On Wed, Oct 21, 2015 at 05:44:20PM +0100, Nux! wrote: >>>>>>>> Hi folks, >>>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>>> I know you're rebuilding livbirt for the SIG. Would it be >>>>>>>> possible to enable RBD >>>>>>>> support in it? >>>>>>>> >>>>>>> Yes, we should definitely enable RBD / Ceph support in libvirt! >>>>>>> >>>>>>> >>>>>>> >>>>>>>> I know quite a few cases (in the Cloudstack community) that >>>>>>>> switched to Ubuntu >>>>>>>> particularly because CEPH support was missing. >>>>>>>> The recommendation is to rebuild the rpms, but this is not a >>>>>>>> viable thing for >>>>>>>> everyone. E.g. >>>>>>>> http://blog.widodh.nl/2015/04/rebuilding-libvirt-under-centos-7-1-with-rbd-storage-pool-support/ >>>>>>>> >>>>>>>> >>>>>>>> Another thing that I noticed on the CentOS ml recently is an >>>>>>>> alleged lack of >>>>>>>> hooks, https://www.libvirt.org/hooks.html >>>>>>>> >>>>>>>> And last but not least, where could I find the libvirt (s)rpms >>>>>>>> that the SIG >>>>>>>> produces? >>>>>>>> >>>>>>>> Lucian >>>>>>>> >>>>>>> -- Pasi > > > _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > https://lists.centos.org/mailman/listinfo/centos-virt-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20151103/19f7778d/attachment-0002.html>
Le 02/11/2015 18:28, Johnny Hughes a ?crit :> On 10/31/2015 04:34 PM, Jean-Marc LIGER wrote: >> Hi Lucian, >> >> It seems to be upstream libvirt-1.2.15-2 with options with_xen and >> with_libxl enabled. >> http://cbs.centos.org/koji/buildinfo?buildID=1348 >> > Right, and we can use that version, or a newer one and enable rbd as well.You might use this preview one : http://people.redhat.com/~rjones/libguestfs-RHEL-7.2-preview/libvirt-1.2.17-3.el7.src.rpm I personally rebuild libvirt from last official releases which enable ceph by default for el7 : http://libvirt.org/sources/ My dogfooding tests still **can be found here : https://copr.fedoraproject.org/coprs/jmliger/virt7-upstream/> The next question is, is there a difference between the generic rbd and > building against ceph-devel. (As in, is one ceph only and the other > generic only or can you use both when built against ceph-devel, etc) > > Since qemu-kvm-ev enables ceph, if we can also enable ceph in libvirt, > seems like a win to me, if it also does rbd the same as building against > librados2-devel and librbd1-devel.Maybe I'm wrong but ceph-devel seems to have been replaced by librados2-devel and librbd1-devel in el7.> These may only work with CentOS 7 as well .. have to look at if those > build in CentOS 6.7.Which ceph release forCentOS 6.7Hammer or Firefly ? Jean-Marc Liger> Thoughts? > > Thanks, > Johnny Hughes > > >> Regards, >> Jean-Marc >> >> Le 28/10/2015 09:38, Nux! a ?crit : >>> Pasi, >>> >>> Where are these RPMs, how are they built, what exactly are the >>> differences vs the stock ones? >>> >>> Regards, >>> Lucian >>> >>> -- >>> Sent from the Delta quadrant using Borg technology! >>> >>> Nux! >>> www.nux.ro >>> >>> ----- Original Message ----- >>>> From: "Pasi K?rkk?inen"<pasik at iki.fi> >>>> To: "Discussion about the virtualization on CentOS" >>>> <centos-virt at centos.org> >>>> Sent: Wednesday, 28 October, 2015 08:36:18 >>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>> On Tue, Oct 27, 2015 at 05:19:16PM +0000, Nux! wrote: >>>>> To clarify my own request: >>>>> >>>>> RBD (for CEPH) support is available in the version bundled in RHEL >>>>> 7.2 Beta, so >>>>> we'll have it in CentOS 7.2 (or whatever will be the identifying >>>>> number). >>>>> >>>>> The hooks seems just like a matter of creating files in the correct >>>>> location. >>>>> >>>>> ..So, all is good in the world once again. >>>>> >>>> Except the VirtSIG provides a different version/build of libvirt >>>> rpms, so we >>>> still need to enable RBD/Ceph support separately in VirtSIG provided >>>> version.. >>>> >>>> >>>> -- Pasi >>>> >>>>> Regards, >>>>> Lucian >>>>> >>>>> -- >>>>> Sent from the Delta quadrant using Borg technology! >>>>> >>>>> Nux! >>>>> www.nux.ro >>>>> >>>>> ----- Original Message ----- >>>>>> From: "Nux!"<nux at li.nux.ro> >>>>>> To: "Discussion about the virtualization on CentOS" >>>>>> <centos-virt at centos.org> >>>>>> Sent: Tuesday, 27 October, 2015 15:22:27 >>>>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>>>> So... how exactly do we proceed? >>>>>> >>>>>> Anyone from the Virt SIG, please stand up? >>>>>> >>>>>> -- >>>>>> Sent from the Delta quadrant using Borg technology! >>>>>> >>>>>> Nux! >>>>>> www.nux.ro >>>>>> >>>>>> ----- Original Message ----- >>>>>>> From: "Pasi K?rkk?inen"<pasik at iki.fi> >>>>>>> To: "Discussion about the virtualization on CentOS" >>>>>>> <centos-virt at centos.org> >>>>>>> Sent: Sunday, 25 October, 2015 11:02:22 >>>>>>> Subject: Re: [CentOS-virt] Libvirt enhancement requests >>>>>>> On Wed, Oct 21, 2015 at 05:44:20PM +0100, Nux! wrote: >>>>>>>> Hi folks, >>>>>>>> >>>>>>> Hi, >>>>>>> >>>>>>>> I know you're rebuilding livbirt for the SIG. Would it be >>>>>>>> possible to enable RBD >>>>>>>> support in it? >>>>>>>> >>>>>>> Yes, we should definitely enable RBD / Ceph support in libvirt! >>>>>>> >>>>>>> >>>>>>> >>>>>>>> I know quite a few cases (in the Cloudstack community) that >>>>>>>> switched to Ubuntu >>>>>>>> particularly because CEPH support was missing. >>>>>>>> The recommendation is to rebuild the rpms, but this is not a >>>>>>>> viable thing for >>>>>>>> everyone. E.g. >>>>>>>> http://blog.widodh.nl/2015/04/rebuilding-libvirt-under-centos-7-1-with-rbd-storage-pool-support/ >>>>>>>> >>>>>>>> >>>>>>>> Another thing that I noticed on the CentOS ml recently is an >>>>>>>> alleged lack of >>>>>>>> hooks,https://www.libvirt.org/hooks.html >>>>>>>> >>>>>>>> And last but not least, where could I find the libvirt (s)rpms >>>>>>>> that the SIG >>>>>>>> produces? >>>>>>>> >>>>>>>> Lucian >>>>>>>> >>>>>>> -- Pasi > > > _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > https://lists.centos.org/mailman/listinfo/centos-virt-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20151103/040c672a/attachment-0002.html>