Hello, All! Is it possible to use binary packages build from http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7/SRPMS/qemu-kvm-ev-2.1.2-23.el7_1.3.1.src.rpm with plain CentOS 7.1 and use all other packages from CentOS (libvirt, virt-manager, etc) Is it have reasons, if I not use live migrations and qcow2 snapshots? (instead use zfs, zvols and zfs snapshots for VM disks online backups) Is using qemu-kvm-ev with CentOS 7.1 have any disadvantages? -- Best regards, Gena
Yes, you can. In fact you can use the binaries from the ovirt repo itself, no need to rebuild. -- Sent from the Delta quadrant using Borg technology! Nux! www.nux.ro ----- Original Message -----> From: "Gena Makhomed" <gmm at csdoc.com> > To: centos-virt at centos.org > Sent: Wednesday, 29 July, 2015 19:19:13 > Subject: [CentOS-virt] qemu-kvm-ev with CentOS 7.1> Hello, All! > > Is it possible to use binary packages build from > http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7/SRPMS/qemu-kvm-ev-2.1.2-23.el7_1.3.1.src.rpm > with plain CentOS 7.1 and use all other packages from CentOS > (libvirt, virt-manager, etc) > > Is it have reasons, if I not use live migrations and qcow2 snapshots? > (instead use zfs, zvols and zfs snapshots for VM disks online backups) > > Is using qemu-kvm-ev with CentOS 7.1 have any disadvantages? > > -- > Best regards, > Gena > _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > http://lists.centos.org/mailman/listinfo/centos-virt
Gena Makhomed
2015-Jul-29 22:09 UTC
[CentOS-virt] CentOS 7.1 + qemu-kvm-ev + SLIC acpitable windows bug workaround
On 29.07.2015 21:34, Nux! wrote:> Yes, you can. > In fact you can use the binaries from the ovirt repo itself, no need to rebuild.Thank you! In fact - I can't use raw binaries from the ovirt repo itself, because these qemu-kvm binaries contains one bug, which is already fixed in Debian: If you want to migrate Windows from hardware node to VM using CentOS 7.1 on hardware node and libvirt xml config: <domain type='kvm' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'> ..... <qemu:commandline> <qemu:arg value='-acpitable'/> <qemu:arg value='file=/sys/firmware/acpi/tables/SLIC'/> </qemu:commandline> </domain> Winodws not working correctly in this case, because Windows requires, what oem_id and oem_table_id from SLIC must be also placed into oem_id and oem_table_id of RSDT. Debian version of qemu-kvm contains workaround for this windows bug, and using Debian - Windows VM will works fine. But CentOS packages does not contain such workaround, so qemu-kvm-ev now must be patched manually with each new release. Patch already was created by Michael Tokarev in 2014: this is file mjt-set-oem-in-rsdt-like-slic.diff from https://packages.debian.org/jessie/qemu-kvm This patch cleanly applies also to qemu-kvm-ev-2.1.2-23.el7_1.3.1 See mjt-set-oem-in-rsdt-like-slic.diff and qemu-kvm.spec.patch in attach for details. After executing rpmbuild -ba qemu-kvm.spec you can place new qemu-kvm binaries into /srv/download/centos/7/privat/x86_64/Packages create local repo and use it for upgrading rpm packages, for example, see privat.repo and privat-createrepo-7-x86_64 in attach. ============================================================= Better if this workaround of Windows bug will be included into RHEL/CentOS ovirt repo binaries, and this will allow to anybody easy migrate Windows from hardware nodes to VMs and easy run CentOS/RHEL at hardware nodes. P.S. After patching qemu-kvm - option acpitable works without any bugs: # man qemu-kvm -acpitable [sig=str][...] If a SLIC table is supplied to qemu, then the oem_id from the SLIC table will be copied into the RSDT table (this is a Debian addition).> ----- Original Message ----->> Is it possible to use binary packages build from >> http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7/SRPMS/qemu-kvm-ev-2.1.2-23.el7_1.3.1.src.rpm >> with plain CentOS 7.1 and use all other packages from CentOS >> (libvirt, virt-manager, etc) >> >> Is it have reasons, if I not use live migrations and qcow2 snapshots? >> (instead use zfs, zvols and zfs snapshots for VM disks online backups) >> >> Is using qemu-kvm-ev with CentOS 7.1 have any disadvantages?-- Best regards, Gena -------------- next part -------------- --- qemu-kvm.spec.orig 2015-05-15 13:27:19.000000000 +0300 +++ qemu-kvm.spec 2015-07-29 23:25:04.421842297 +0300 @@ -93,7 +93,7 @@ Version: 2.1.2 Release: 23%{?dist}_1.3.1 # Epoch because we pushed a qemu-1.0 package. AIUI this can't ever be dropped -Epoch: 10 +Epoch: 77 License: GPLv2+ and LGPLv2+ and BSD Group: Development/Tools URL: http://www.qemu.org/ @@ -847,6 +847,8 @@ Patch341: kvm-block-Fix-max-nb_sectors-in-bdrv_make_zero.patch # For bz#1219271 - Patch342: kvm-fdc-force-the-fifo-access-to-be-in-bounds-of-the-all.patch +# copy OEM ACPI parameters from SLIC table to RSDT +Patch999: mjt-set-oem-in-rsdt-like-slic.diff BuildRequires: zlib-devel BuildRequires: SDL-devel @@ -1400,6 +1402,7 @@ %patch340 -p1 %patch341 -p1 %patch342 -p1 +%patch999 -p1 %build buildarch="%{kvm_target}-softmmu" -------------- next part -------------- commit 4933716beef26b353a1c374d6d8e6dd2e09333af Author: Michael Tokarev <mjt at tls.msk.ru> Date: Sat Apr 5 19:17:54 2014 +0400 Subject: copy OEM ACPI parameters from SLIC table to RSDT When building RSDT table, pick OEM ID fields from uer-supplied SLIC table instead of using hard-coded QEMU defaults. This way, say, OEM version of Windows7 can be run inside qemu using the same OEM activation as on bare metal, by pointing at system firmware: -acpitable file=/sys/firmware/acpi/tables/SLIC Windows7 requires that OEM ID in RSDT matches those in SLIC to consider SLIC to be valid. This is somewhat hackish approach, but it works fairy well in practice. Signed-off-by: Michael Tokarev <mjt at tls.msk.ru> diff --git a/hw/acpi/core.c b/hw/acpi/core.c index 79414b4..a8a3f26 100644 --- a/hw/acpi/core.c +++ b/hw/acpi/core.c @@ -53,6 +53,7 @@ static const char unsigned dfl_hdr[ACPI_TABLE_HDR_SIZE - ACPI_TABLE_PFX_SIZE] char unsigned *acpi_tables; size_t acpi_tables_len; +size_t slic_table_offset; static QemuOptsList qemu_acpi_opts = { .name = "acpi", @@ -226,6 +227,10 @@ static void acpi_table_install(const char unsigned *blob, size_t bloblen, /* recalculate checksum */ ext_hdr->checksum = acpi_checksum((const char unsigned *)ext_hdr + ACPI_TABLE_PFX_SIZE, acpi_payload_size); + + if (memcmp(ext_hdr->sig, "SLIC", 4) == 0) { + slic_table_offset = acpi_tables_len - acpi_payload_size; + } } void acpi_table_add(const QemuOpts *opts, Error **errp) diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c index a5d3fbf..9e0e16a 100644 --- a/hw/i386/acpi-build.c +++ b/hw/i386/acpi-build.c @@ -224,6 +224,8 @@ static void acpi_get_pci_info(PcPciInfo *info) #define ACPI_BUILD_TABLE_FILE "etc/acpi/tables" #define ACPI_BUILD_RSDP_FILE "etc/acpi/rsdp" +extern size_t slic_table_offset; + static void build_header(GArray *linker, GArray *table_data, AcpiTableHeader *h, const char *sig, int len, uint8_t rev) @@ -237,6 +239,11 @@ build_header(GArray *linker, GArray *table_data, h->oem_revision = cpu_to_le32(1); memcpy(h->asl_compiler_id, ACPI_BUILD_APPNAME4, 4); h->asl_compiler_revision = cpu_to_le32(1); + if (memcmp(sig, "RSDT", 4) == 0 && slic_table_offset) { + /* for win7: OEM info in RSDT and SLIC should be the same */ + AcpiTableHeader *s = (AcpiTableHeader *)(acpi_tables + slic_table_offset); + memcpy(h->oem_id, s->oem_id, 6 + 4 + 4); + } h->checksum = 0; /* Checksum to be filled in by Guest linker */ bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE, --- a/qemu-options.hx +++ b/qemu-options.hx @@ -1349,6 +1349,8 @@ For data=, only data portion of the table is used, all header information is specified in the command line. +If a SLIC table is supplied to qemu, then the oem_id from the SLIC table +will be copied into the RSDT table (this is a Debian addition). ETEXI DEF("smbios", HAS_ARG, QEMU_OPTION_smbios, -------------- next part -------------- #!/bin/bash VERSION=7 REPO=privat ARCH=x86_64 OS=centos REPO_BASEDIR=/srv/download CACHE_BASEDIR=/var/cache/createrepo VARIABLE=$OS/$VERSION/$REPO/$ARCH CACHEDIR=$CACHE_BASEDIR/$VARIABLE REPO_DIR=$REPO_BASEDIR/$VARIABLE echo echo "<<< createrepo $VARIABLE >>>" echo chown root:root /srv/download/centos/7/privat/x86_64/Packages/*.rpm chmod 644 /srv/download/centos/7/privat/x86_64/Packages/*.rpm mkdir -p $CACHEDIR createrepo --cachedir $CACHEDIR --database --verbose $REPO_DIR -------------- next part -------------- [privat] name=CentOS-$releasever - Privat baseurl=file:///srv/download/centos/$releasever/privat/$basearch/ gpgcheck=0
Note that qemu-kvm-ev is built within Virt SIG too in kvm-common-testing CBS repo On Wed, Jul 29, 2015 at 8:34 PM, Nux! <nux at li.nux.ro> wrote:> Yes, you can. In fact you can use the binaries from the ovirt repo itself, > no need to rebuild. > > -- > Sent from the Delta quadrant using Borg technology! > > Nux! > www.nux.ro > > ----- Original Message ----- > > From: "Gena Makhomed" <gmm at csdoc.com> > > To: centos-virt at centos.org > > Sent: Wednesday, 29 July, 2015 19:19:13 > > Subject: [CentOS-virt] qemu-kvm-ev with CentOS 7.1 > > > Hello, All! > > > > Is it possible to use binary packages build from > > > http://resources.ovirt.org/pub/ovirt-3.5/rpm/el7/SRPMS/qemu-kvm-ev-2.1.2-23.el7_1.3.1.src.rpm > > with plain CentOS 7.1 and use all other packages from CentOS > > (libvirt, virt-manager, etc) > > > > Is it have reasons, if I not use live migrations and qcow2 snapshots? > > (instead use zfs, zvols and zfs snapshots for VM disks online backups) > > > > Is using qemu-kvm-ev with CentOS 7.1 have any disadvantages? > > > > -- > > Best regards, > > Gena > > _______________________________________________ > > CentOS-virt mailing list > > CentOS-virt at centos.org > > http://lists.centos.org/mailman/listinfo/centos-virt > _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > http://lists.centos.org/mailman/listinfo/centos-virt >-- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20150730/f6a3b0ce/attachment-0002.html>
Reasonably Related Threads
- qemu-kvm-ev with CentOS 7.1
- qemu-kvm SLIC acpitable workaround of Windows bug
- centos-qemu-ev repository not work for x86_64 arch on CentOS 7.5
- CentOS 7.1 + qemu-kvm-ev + SLIC acpitable windows bug workaround
- centos-qemu-ev repository not work for x86_64 arch on CentOS 7.5