rgritzo
2015-Jan-31 03:24 UTC
[CentOS-virt] libvirt errors after applying RPMS from 2015:X002
Thanks for the info.
I am trying to connect to the Xen hypervisor, via a localhost connection defined
in the virt-manager configuration.
here is the detail provided in the error dialog:
?????????
Unable to open a connection to the Xen hypervisor/daemon.
Verify that:
- A Xen host kernel was booted
- The Xen service has been started
internal error: DBus support not compiled into this binary
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/connection.py", line 1168,
in _open_thread
self.vmm = self._try_open()
File "/usr/share/virt-manager/virtManager/connection.py", line 1152,
in _try_open
flags)
File "/usr/lib64/python2.6/site-packages/libvirt.py", line 105, in
openAuth
if ret is None:raise libvirtError('virConnectOpenAuth() failed')
libvirtError: internal error: DBus support not compiled into this binary
??????????
The hypervisor and VM?s work. If i start and manage VMs with virsh, the work
fine. it just is the virt-manager that seems broken, but that is important for
my operation.
i just applied the patches to a second machine - just in case it was something
about the first one - and the same results.
i am not as versed in python debugging as i would like to be, so this will be a
challenge. it sure seems like the issue is in the libvirtd library from the
error messages -
but i will keep poking at it as time permits and post here if i have any
answers...
thanks.
r.
> On Wed, Jan 28, 2015 at 09:54:54PM -0700, rgritzo wrote:
> > folks:
> >
> > after applying the updated rpms from advisory 2015:X002 i am having
problems with libvirtd, and with virt-manager.
> >
> > if i run libvirtd in the foreground and look at the error messages,
the error i see is
> > 2015-01-29 04:45:27.342+0000: 6477: error : virDBusGetSystemBus:1742 :
internal error: DBus support not compiled into this binary
> >
>
> Hmm, weird, it works OK for me..
>
> > and virt-manager is unable to connect to the hypervisor. this started
after i applied the subject patches.
> >
> > is this an issue with the recent versions of libvirt?
> > anybody else seeing this behavior?
> >
>
> What hypervisor are you trying to use? Xen? KVM ?
>
> > btw - system is centos 6.6, kernel 3.10.63-11.el6.centos.alt.x86_64
> >
>
> I'm using the same kernel with Xen 4.4.1 rpms.
>
>
> > thanks in advance.
> >
> > --
> > rgritzo at gmail.com
> >
>
>
> ? Pasi
?
r.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.centos.org/pipermail/centos-virt/attachments/20150130/8db800d5/attachment-0002.html>
Pasi Kärkkäinen
2015-Feb-03 08:26 UTC
[CentOS-virt] libvirt errors after applying RPMS from 2015:X002
On Fri, Jan 30, 2015 at 08:24:59PM -0700, rgritzo wrote:> Thanks for the info. > I am trying to connect to the Xen hypervisor, via a localhost connection > defined in the virt-manager configuration. > here is the detail provided in the error dialog: > ********* > Unable to open a connection to the Xen hypervisor/daemon. > Verify that: > - A Xen host kernel was booted > - The Xen service has been started > internal error: DBus support not compiled into this binary > Traceback (most recent call last): > File "/usr/share/virt-manager/virtManager/connection.py", line 1168, in > _open_thread > self.vmm = self._try_open() > File "/usr/share/virt-manager/virtManager/connection.py", line 1152, in > _try_open > flags) > File "/usr/lib64/python2.6/site-packages/libvirt.py", line 105, in > openAuth > if ret is None:raise libvirtError('virConnectOpenAuth() failed') > libvirtError: internal error: DBus support not compiled into this binary > ********** > The hypervisor and VM*s work. If i start and manage VMs with virsh, the > work fine. it just is the virt-manager that seems broken, but that is > important for my operation. > i just applied the patches to a second machine - just in case it was > something about the first one - and the same results. > i am not as versed in python debugging as i would like to be, so this will > be a challenge. it sure seems like the issue is in the libvirtd library > from the error messages - > but i will keep poking at it as time permits and post here if i have any > answers... >What does "virsh version" command say ? Do you have selinux in enforcing mode? Try "getenforce" command. -- Pasi> thanks. > r. > > On Wed, Jan 28, 2015 at 09:54:54PM -0700, rgritzo wrote: > > folks: > > > > after applying the updated rpms from advisory 2015:X002 i am having problems with libvirtd, and with virt-manager. > > > > if i run libvirtd in the foreground and look at the error messages, the error i see is > > 2015-01-29 04:45:27.342+0000: 6477: error : virDBusGetSystemBus:1742 : internal error: DBus support not compiled into this binary > > > > Hmm, weird, it works OK for me.. > > > and virt-manager is unable to connect to the hypervisor. this started after i applied the subject patches. > > > > is this an issue with the recent versions of libvirt? > > anybody else seeing this behavior? > > > > What hypervisor are you trying to use? Xen? KVM ? > > > btw - system is centos 6.6, kernel 3.10.63-11.el6.centos.alt.x86_64 > > > > I'm using the same kernel with Xen 4.4.1 rpms. > > > > thanks in advance. > > > > -- > > [1]rgritzo at gmail.com > > > > > * Pasi > > * > r. > > References > > Visible links > 1. http://lists.centos.org/mailman/listinfo/centos-virt> _______________________________________________ > CentOS-virt mailing list > CentOS-virt at centos.org > http://lists.centos.org/mailman/listinfo/centos-virt
rgritzo
2015-Mar-24 03:45 UTC
[CentOS-virt] libvirt 1.2.10 - libvirt access via policykit fails
this is the same problem that i started chasing back in january, and posted in the mailing list under the topic: libvirt errors after applying RPMS from 2015:X002, last message in the thread is here: http://lists.centos.org/pipermail/centos-virt/2015-February/004247.html <http://lists.centos.org/pipermail/centos-virt/2015-February/004247.html> i have more information here, and am re-posting hoping to get some new insights. btw - this is on centos 6.6, kernel 3.10.68-11.el6.centos.alt.x86_64. i have a policy kit (.pkla) local authority file that should allow a specific user access to manage xen domains, but that seems to be failing: [user at centos ~]$ virsh -c xen:/// error: failed to connect to the hypervisor error: internal error: DBus support not compiled into this binary [user at centos ~]$ this behavior started with the updates applied as a result of the 2015:x002 advisory. after another day of troubleshooting, with an older machine that has not been patched side by side with the fully updated system, i think i have tracked it down to the update from libvirt-0.10.2.8-9.el6.centos.alt.x86_64 (and related dependencies) to libvirt-1.2.10-3.el6.x86_64. it seems like with the older libvirt and virsh 0.10.2.8 the policy kit authority file would grant access to virsh to manage Dom0 and DomU just fine, but with the switch over to libvirt-1.2.10 (and virsh 1.2.10) something changed, and now not only does the policykit not work, but flags the ?DBus support? error above. running virsh with sudo, or as a privileged user, works just fine. but trying to run it as a non-privileged user, granting access through policy kit, fails. in reviewing the changelogs for libvirt it seems that a patch was applied in late 2014 that changed the libvirt polkit code to use the DBusAPI instead of the pkcheck CLI helper - so i am guessing this is where the DBus reference in the error message comes in? this DBus API change was applied to libvirt 1.2.9, so i am assuming it came in with the upgrade to libvirt-1.2.10. which brings me around full circle to the libvirtd error message - which is: 2015-03-24 02:51:36.550+0000: 5777: error : virDBusGetSystemBus:1742 : internal error: DBus support not compiled into this binary i reviewed the build log for libvirt at http://cbs.centos.org/kojifiles/packages/libvirt/1.2.10/3.el6/data/logs/x86_64/build.log <http://cbs.centos.org/kojifiles/packages/libvirt/1.2.10/3.el6/data/logs/x86_64/build.log> and indeed i see: configure: dbus: no so that seems consistent. i see some patches to libvirtd in august of 2013 that refer to the daemon having a fallback method for those systems that don?t support DBus. is there some mechanism in libvirtd to allow the policy checks to work without dBus - and if so any ideas as to either a) why they are not working, b) how to enable / fix this? thanks again for your patience on this? r. -- rgritzo at gmail.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20150323/3c0ae8be/attachment-0002.html>
rgritzo
2015-Mar-24 19:15 UTC
[CentOS-virt] Solved: libvirt 1.2.10 - libvirt access via policykit fails
short answer: i solved this problem by explicitly setting auth_unix_ro = ?none? auth_unix = ?none? in the libvirtd.conf file, and not using policy kit for access, but using standard unix permissions instead. longer answer and request: i first downloaded the source for libvirt and compiled it with bus support (?with-dbus) and installed and tested it. policy kit then works as it did before the change to the 1.2.x series libvirt. i then went back and re-read the configuration option text in the libvirtd.conf file and snapped to the statement that if polkit was compiled in (which it is in version 1.2.10) then the default on the auth_unix directive will change from ?none? as shown in the comment to ?polkit?, which in libvirt 1.2.10 wants to use DBus, hence the error. explicitly setting the directive to ?none? disables the polkit access control and solves the DBus error, although at the sacrifice of some fine grained control. request: since centos 6 has DBus support, can the maintainer of the libvirt package enable DBus support in the build, so we can use polkit access control? thanks? r.> On Mar 23, 2015, at 21:45, rgritzo <rgritzo at gmail.com> wrote: > > this is the same problem that i started chasing back in january, and posted in the mailing list under the topic: > libvirt errors after applying RPMS from 2015:X002, last message in the thread is here: > http://lists.centos.org/pipermail/centos-virt/2015-February/004247.html <http://lists.centos.org/pipermail/centos-virt/2015-February/004247.html> > > i have more information here, and am re-posting hoping to get some new insights. > > btw - this is on centos 6.6, kernel 3.10.68-11.el6.centos.alt.x86_64. > > i have a policy kit (.pkla) local authority file that should allow a specific user access to manage xen domains, but that seems to be failing: > > [user at centos ~]$ virsh -c xen:/// <xen:///> > error: failed to connect to the hypervisor > error: internal error: DBus support not compiled into this binary > [user at centos ~]$ > > this behavior started with the updates applied as a result of the 2015:x002 advisory. > > after another day of troubleshooting, with an older machine that has not been patched side by side with the fully updated system, i think i have tracked it down to the update from libvirt-0.10.2.8-9.el6.centos.alt.x86_64 (and related dependencies) to libvirt-1.2.10-3.el6.x86_64. > > it seems like with the older libvirt and virsh 0.10.2.8 the policy kit authority file would grant access to virsh to manage Dom0 and DomU just fine, but with the switch over to libvirt-1.2.10 (and virsh 1.2.10) something changed, and now not only does the policykit not work, but flags the ?DBus support? error above. running virsh with sudo, or as a privileged user, works just fine. but trying to run it as a non-privileged user, granting access through policy kit, fails. > > in reviewing the changelogs for libvirt it seems that a patch was applied in late 2014 that changed the libvirt polkit code to use the DBusAPI instead of the pkcheck CLI helper - so i am guessing this is where the DBus reference in the error message comes in? this DBus API change was applied to libvirt 1.2.9, so i am assuming it came in with the upgrade to libvirt-1.2.10. > > which brings me around full circle to the libvirtd error message - which is: > > 2015-03-24 02:51:36.550+0000: 5777: error : virDBusGetSystemBus:1742 : internal error: DBus support not compiled into this binary > > i reviewed the build log for libvirt at http://cbs.centos.org/kojifiles/packages/libvirt/1.2.10/3.el6/data/logs/x86_64/build.log <http://cbs.centos.org/kojifiles/packages/libvirt/1.2.10/3.el6/data/logs/x86_64/build.log> and indeed i see: > configure: dbus: no > > so that seems consistent. > > i see some patches to libvirtd in august of 2013 that refer to the daemon having a fallback method for those systems that don?t support DBus. > > is there some mechanism in libvirtd to allow the policy checks to work without dBus - and if so any ideas as to either > a) why they are not working, > b) how to enable / fix this? > > thanks again for your patience on this? > > r. > > -- > rgritzo at gmail.com <http://gmail.com/> >-- rgritzo at gmail.com <http://gmail.com/> -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos-virt/attachments/20150324/52892a51/attachment-0002.html>