asterisk users - Jul 2023 - Get channel variables via ARI/AMI

>> There are SOME protocol level things accessible using CHANNEL[1] but
that's it.
>> [1]
https://wiki.asterisk.org/wiki/display/AST/Asterisk+20+Function_CHANNEL
 

 

I am trying to use the CHANNEL function listed above from the AMI.  Since it is
not an AMI “action”, but rather a dialplan “function”, I’m trying to figure out
how to call this from the AMI.  Using a telnet session to the AMI I’ve tried
variations of:

 

action: command

actionid: id123

command: channel(PJSIP/240000-1a)

 

but they don’t work.  Is the basic concept correct that I can using the
“command” action to run a statement that would work in the dialplan?  If not,
how would I call “channel” from the AMI ?

 

Thanks

Brian

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20230702/3378893c/attachment.html>

On Sun, Jul 2, 2023 at 4:18 PM TTT <lists at telium.io> wrote:
> >> There are SOME protocol level things accessible using CHANNEL[1]
but
> that's it.
>
> >> [1]
> https://wiki.asterisk.org/wiki/display/AST/Asterisk+20+Function_CHANNEL
>
>
>
>
>
> I am trying to use the CHANNEL function listed above from the AMI.  Since
> it is not an AMI “action”, but rather a dialplan “function”, I’m trying to
> figure out how to call this from the AMI.  Using a telnet session to the
> AMI I’ve tried variations of:
>
You use the AMI action Getvar[1] which allows channel variables and
dialplan functions.

[1]
https://wiki.asterisk.org/wiki/display/AST/Asterisk+20+ManagerAction_Getvar

-- 
Joshua C. Colp
Asterisk Project Lead
Sangoma Technologies
Check us out at www.sangoma.com and www.asterisk.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20230702/37a7c017/attachment.html>