>From https://wiki.asterisk.org/wiki/display/AST/Channels
"The primary exception is with Local Channels. In the case of local
channels, you'll typically have two local channel legs, one that is treated
as outbound and the other as inbound. In this case both are really inside
Asterisk, but one is executing dialplan and the other is not. The leg executing
dialplan is the one treated as inbound."
In your case, context-00000ce9;1 is the inbound channel because you did
Dial(Local/number at context) and context-00000ce9;2 is the outbound channel
because it did the Dial to another destination. Simply, the numbers represent
each leg of a local channel.
Tom
On 2022-09-07, 10:18 AM, "asterisk-users on behalf of Antony Stone"
<asterisk-users-bounces at lists.digium.com on behalf of Antony.Stone at
asterisk.open.source.it> wrote:
On Wednesday 07 September 2022 at 11:44:54, Antony Stone wrote:
> Hi.
This is a follow-up to an email I posted earlier today to the list, although
I
haven't seen it come back yet. If it's under moderation for some
reason, I
hope some kindly admin will release it :)
> I'm trying to deal with a problem regarding putting a call on hold
and then
> later resuming it. I am using chan_sip throughout, and Asterisk 16.
<snip detail from previous email>
> The main thing which is puzzling me about this is that I see examples
of
> both Local/number at context-00000ce9;1 and Local/number at
context-00000ce9;2
> during the processing of the calls.
>
> What is the significance of the number following the semi-colon?
>
> I also see in verbose logging output:
>
> [2022-09-07 09:37:57.310706] pbx VERBOSE[29148]: dial.c:598 in
> handle_frame: Local/number at context-00000ce9;1 answered
>
> [2022-09-07 09:37:57.310792] pbx VERBOSE[29155][C-00001265]:
> bridge_channel.c:2252 in bridge_channel_internal_push_full: Channel
> SIP/Trunkname-00002b55 joined 'simple_bridge' basic-bridge
<7e260e93-
> abd4-48ea-96f1-33601165dba2>
>
> [2022-09-07 09:37:57.310937] pbx VERBOSE[29149][C-00001265]:
> bridge_channel.c:2252 in bridge_channel_internal_push_full: Channel
> Local/number at context-00000ce9;2 joined 'simple_bridge'
basic-bridge
> <7e260e93- abd4-48ea-96f1-33601165dba2>
>
>
> So, when the channel Local/number at context-00000ce9;1 gets answered,
the
> result is to bridge the channels Local/number at context-00000ce9;2 and
> SIP/Trunkname-00002b55
I see something very similar in the documentation about local channels at
https://wiki.asterisk.org/wiki/display/AST/Using+Callfiles+and+Local+Channels -
there are examples of both devices-ecf0;1 and devices-ecf0;2 but no mention
of
what the final digit means.
Can anyone enlighten me please?
Antony.
--
Never automate fully anything that does not have a manual override
capability.
Never design anything that cannot work under degraded conditions in
emergency.
Please reply to the list;
please *don't*
CC me.
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
Check out the new Asterisk community forum at:
https://community.asterisk.org/
New to Asterisk? Start here:
https://wiki.asterisk.org/wiki/display/AST/Getting+Started
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users