Hi All,
I am trying to get the opus codec working with linphone.
I followed the instructions... This shows me its loaded
core show translation paths opus
--- Translation paths SRC Codec "opus" sample rate 48000 ---
opus:48000 To g723:8000 : No Translation Path
opus:48000 To ulaw:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(ulaw at 8000)
opus:48000 To alaw:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(alaw at 8000)
opus:48000 To gsm:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(gsm at 8000)
opus:48000 To g726:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(g726 at 8000)
opus:48000 To g726aal2:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(g726aal2 at 8000)
opus:48000 To adpcm:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(adpcm at 8000)
opus:48000 To slin:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)
opus:48000 To slin:12000 : (opus at 48000)->(slin at 48000
)->(slin at 12000)
opus:48000 To slin:16000 : (opus at 48000)->(slin at 48000
)->(slin at 16000)
opus:48000 To slin:24000 : (opus at 48000)->(slin at 48000
)->(slin at 24000)
opus:48000 To slin:32000 : (opus at 48000)->(slin at 48000
)->(slin at 32000)
opus:48000 To slin:44100 : (opus at 48000)->(slin at 48000
)->(slin at 44100)
opus:48000 To slin:48000 : (opus at 48000)->(slin at
48000)
opus:48000 To slin:96000 : (opus at 48000)->(slin at 48000
)->(slin at 96000)
opus:48000 To slin:192000 : (opus at 48000)->(slin at 48000
)->(slin at 192000)
opus:48000 To lpc10:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(lpc10 at 8000)
opus:48000 To g729:8000 : No Translation Path
opus:48000 To speex:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(speex at 8000)
opus:48000 To speex:16000 : (opus at 48000)->(slin at 48000
)->(slin at 16000)->(speex at 16000)
opus:48000 To speex:32000 : (opus at 48000)->(slin at 48000
)->(slin at 32000)->(speex at 32000)
opus:48000 To ilbc:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(ilbc at 8000)
opus:48000 To g722:16000 : (opus at 48000)->(slin at 48000
)->(slin at 16000)->(g722 at 16000)
opus:48000 To siren7:16000 : No Translation Path
opus:48000 To siren14:32000 : No Translation Path
opus:48000 To testlaw:8000 : (opus at 48000)->(slin at 48000
)->(slin at 8000)->(testlaw at 8000)
opus:48000 To g719:48000 : No Translation Path
opus:48000 To none:8000 : No Translation Path
opus:48000 To silk:8000 : No Translation Path
opus:48000 To silk:12000 : No Translation Path
opus:48000 To silk:16000 : No Translation Path
opus:48000 To silk:24000 : No Translation Path
I set linphone to ONLY use opus codec. When I call in the call works - but
no audio.
Whats next?
Jerry
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20190708/531e8db0/attachment.html>
On Mon, Jul 8, 2019, at 8:54 AM, Jerry Geis wrote:> Hi All, > > I am trying to get the opus codec working with linphone. > I followed the instructions... This shows me its loadedDid you do sanity checking before switching codecs to confirm media flow and eliminate that as a potential cause of failure? -- Joshua C. Colp Digium - A Sangoma Company | Senior Software Developer 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Check us out at: www.digium.com & www.asterisk.org
>> Did you do sanity checking before switching codecs to confirm media flowand eliminate that as a potential cause of failure? Thanks. Correct, if I switch back to gsm, g722 etc... it seems to work fine. Jerry>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20190708/c118a680/attachment.html>
Ok - reboot windows and seems like its working now... "who knows"... Sorry. Although I dont notice much difference from g722 and opus. Should I ? Jerry>-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20190708/d01a7a66/attachment.html>